What I would like to do is copy the format of a range of cells (A2:O2) and paste that format into all the other rows of data beneath it. But my last row of data will change periodically, and I don't know how to tell Excel to find the last row each time. Here's what I was able to figure out on my own:
Code:
Sub CopyFormats()
Range("A2:O2").Select
Selection.Copy
[Code]....
I have numerical data in column A rows 1:14.
I'm adding it up in row 15. Sum=(A1:A14)
Now I've been asked to insert more rows with data above row A14.
What can I put in my Sum formula in place of A14 so when I insert
a new row, any numerical data above it in column A automatically adds up?
Sum=(A1:?)
I don't want to have to go and change it to sum=(A1:A17) if I
insert 3 rows.... I have a huge file to create with sections like this. User
may have to insert new rows. They need to all add up.
I have a vlookup function that works for me in my workbook, when the data range and array is specific, but my data range will expand as will the array, as time goes on. I've used the "max" to produce the most recent results. Is there a way to accomplish this with an ever changing range and array? The most recent date will always be added to the bottom of column "A." I've used =VLOOKUP(MAX(A4:A25),A4:B25,2,0)
View 3 Replies View RelatedI have a worksheet called Sales that could contain any number of columns of data. On another worksheet, I would like to find the last two columns and use a formula like:
Sumif('Sales'!C:C, c5, 'Sales'!D:D). (I have Excel 2007 so D:D is good)
The problem is how to change the C:C and D:D part to be the last columns.
I'm looking for something simple like this:
Sumif('Sales'!Secondtolastcol:Secondtolastcol, c5, 'Sales'!Lastcol:Lastcol)
In a chart series, I have and end number for a row that I have been updating manually everytime I enter a new fuel tank fillup. Is there a simple way with the chart series to just say always go to the last data in the specified column?
See my example here, instead of the 137 in the series is there someway to just say "last data row"?
[URL]
I am trying to AVERAGE an Open-Ended (entire) column, while keeping the first 4 cells, "Out of the loop!"
Example:
=AVERAGE(E:E) less cells E1 through to E4, inclusive.
I need to average a column, without a fixed number of rows, and within an interval (and excluding zeros).
Example: Average of all numbers in the bracket 28-35, in column B2-B??
By this I mean that the total of rows in column B will vary from time to time, so in order to not having to manually change the number of rows each time, I need an "open-ended" formula, that also incorporates say 4 intervals (for instance 1-27, 28-35, 36-70, 71-100).
I have created a spreadsheet some time ago and have been asked to improve on it but I'm rusty with VBA.
I have an automated ordering system that saves each sent order as the date e.g "05-04-2013.xls" but the management team want a graph with the data for the last 4 weeks compared. I have created a seperate workbook called "consumables report.xls" which has a column with the products listed followed by columns "Quantity" and "cost" which is repeated for the 4 weeks of the month.
I want to add a button to prompt the user to choose the saved order e.g "05-04-2013.xls" (all orders saved in same directory) to copy and paste the quantity and cost columns (c8,D69) into "consumables report.xls". I got this to work earlier but it would only paste the formulas and not the values. So I need
A prompt to open workbook
Copy range (c8,d69)
Close work sheet
Paste special .value (c8,D69)
I dont care if it has to open the workbook to copy the data as this will only be used once a month so it dosnt matter how slow the code is.
week 1 week 2 week 3 week 4
Product
quantity
cost
quantity
cost
cost
quantity
cost
1
2
3
4
5
6
7
8
I have a cell with seven conditional formatting formula rules that I now want to copy to the rest of the column. I can copy/paste special/formats one cell at a time but if I try to to this with a group of cells, (or try using the format painter), it treats the formula references as absolute, even though they aren't shown as absolute in the rules manager. Am I missing something? Using 2007.
View 4 Replies View RelatedI'd like to know if it is possible to run a macro in a workbook that will open another workbook (of the users choice) extract data from it, such as columns from its sheets then paste that data into the workbook the macro is running from. The file to be opened will change, so i've found some code that enables the user to select the file to open then open it.
Dim strFile As String
strFile = Application. GetOpenFilename
If strFile <> "False" Then Workbooks.Open strFile
This brings up the standard windows choose file to open box, then opens the selected file. Am I correct in thinking that the Dim here will store the file name I select in the open file box? If so, I'd like to know how to select the workbook using the dim so I can manipulate it from the workbook I'm running the macro in. Incidentally, once the the data has been copied, I'd like the workbook opened with the macro to be closed.
I am successfully opening a .csv file using a variable value stored in a named range in my Main file (the variable includes the directory and path).
I copy data from the .csv file to the Main file then I need to close the .csv file without saving but I want to do that by using the
Windows("xxxx").Activate
command where "xxxx" is the namedrange in my Main file which stores the .csv filename (without the directory and path prefix).
I can use the
ActiveWindow.ActivatePrevious
command but if I have another workbook open, this one closes instead of the .csv file I opened from the macro.
I realise this is probably very basic and I've searched the forums but can't find any identical postings.
How to copy the cell formats of the copied range in the vba.
Code:
Sub Summary_All_Worksheets_With_Formulas()
Dim Sh As Worksheet
Dim Newsh As Worksheet
Dim myCell As Range
Dim ColNum As Integer
Dim RwNum As Long
Dim Basebook As Workbook
With Application
[code]......
Since you can copy to someplace with one line of code like this:
Sheets(1).Range("A1:Z5000").Copy Destination:=Sheets(2).Range("A1")
is there any way of doing this with formatting, or are things like paste special features only possible by selecting something?
Ie: Values, column widths, formats, etc. Does the copy destination argument only allow simple copying?
I have a workbook that has several INPUT areas that are composed by many rows and columns. These areas must be unprotected because the user must be able to fill them in with different numbers.
The challenge is that these areas have different conditional formatting to try to prevent the users to make mistakes, but the users always fill out one row and then copy down the others, when they need to be the same. This is not always the case. Then, the conditional formatting is lost.
The challenge is how can I allow the user manually fill out numbers, but they should not be able to copy and paste, in any way, within these different areas in the workbook?
I currently have a macro that outputs data to a bulletin-board type table in my worksheet. At the moment, what happens is that the macro copies the entire table down one row using copy/paste, then prints a new line of data to the top row of the table.
This works great because it is very fast and because I only have to format each line once--the formats just get copied down every time a new line of data is added.
My problem is that while this program is running, I am unable to use copy and paste in windows, because the copy/pasting from the macro overwrites the windows clipboard.
Is there a way for me to "copy" formats from 1 range to another range of equal size without actually using copy/paste? I know this can be done with values (eg. range("B2:B4").value = range("A2:A4").value), but I can't get it to work with any sort of formatting.
In a macro, I am copying data from another sheet and most of the time I only require the actual data or the values as per below.
View 2 Replies View RelatedI have a spreadsheet with customised formats and formulas and the problem is that when add a new row I have to go through and manually copy all the data to the new row and as there are many columns in the spreadsheet this takes forever.
Is there anyway I could automatically copy all the formats/formulas when I insert a row?
PS: I do not want to copy any data into the cell only the formatting and formulas
- I have a worksheet (W1) which i have filters
- I have another worksheet (W2) that is formatted for a institutional purpose where i must put the things selected in the W1, but the problem is that: in the W1 i have a cell (A1) with some data but in W2 i have a space composed with one line but with several columns and excel says that he cannot paste the information copied in W1 to put in W2.
there is any way to avoid this problem because at the moment i am making copy paste one by one, and it takes to many time and i would like to copy and paste the information selected by the filter in W1 to paste in W2.
I need to find a way to insert a row (preferably at the bottom of an existing list) that mirrors the formatting of the row above.
I have had a stab at this (see attached example file) but my solution requires the user to select the correct activecell before it works correctly
Here's my problem..
if i input 75 in cell G2, the value in A7:E7 will paste or will display in A2:E2
or
if i input 76 in cell G2, the value in A8:E8 will paste or will display in A2:E2
or
if i input 90 in cell G2, the value in A9:E9 will paste or will display in A2:E2
or
if i input 78 in cell G2, the value in A10:E10 will copy or will display in A2:E2
See my attachment.. sample prob.xlsx
my macro pulls download in on sheet1. On sheet2 it makes a pivottable of it with horizontally displayed the suppliers and vertically the codes of products. This is of course dynamic (one month it may contain 10 suppliers + 8 products, other month 15 suppliers + 20 products). On sheet3 is the (static) lay-out of all suppliers and all products. Now, what I want is that all fields <> empty (or zero) from the pivot table are to be copied and placed in sheet3, the 'report' I have to fill in. index and match won't do the job I think.
View 2 Replies View Relatedi have this code at minute to copy information from all my sheets to a summary sheet , is there a way i can modify this code to copy from row 6 to 35 if there is a value in col b on sheet then copy a:bq of that row to summary sheet carry on to end of data , then on next ws copy row 6 as this is machine heading and then same again and loop through all worksheets i have in my array ....
View 9 Replies View Related1. In whatever cell is selected when the macro is run, enter a new row.
2. Copy the information from the row directly above the new row and paste (values, formulas, formats, etc) into the new row.
3. Return to column P in the new row, i.e if the new row is row 11, then return to P11, for row 12 return to P12, etc.
I have tried recording the macro but because it is hard coded to specific rows, its not working. I have attached a sample copy of the sheet (had to zip due to the size of the file).
I had a macro on my previous laptop that worked, but didn't have the macro backed up so it was lost.
I need a vba macro that will copy all active/selected worksheets into a new workbook. Included requirements:
* Maintain tab names
* Only bring in contents/data with all formats (including logo image, but NOT formulas or hidden rows/columns)
* Keep the file name the same except adding "- FINAL" to the end
In my spreadsheet, I have approx. 300 'blocks' of data, one for each 'vendor'. I am tracking 5 stats for each vendor for 12 months. Each 'block' has 5 formulas WITH conditional formatting (only one condition used) for each month, so each 'block' has 60 individual cells with conditional formatting. Excel throws an error when I try to copy the block of formulas and formats down the sheet a few hundred times. I have figured out it isn't the formulas that is the problem. It must be some kind of limit Excel 2003 has for how many cells in a workbook can have conditional formatting.
View 9 Replies View Relatedlast item in we 13-9-2013 is 13-9-2013
last item in we 20-9-2013 is 13-18-2013
last item in we 4-11-2013 is 30-9-2013 as shown in the attached
1.jpg
Copy data from workbook, open existing workbook, select range and paste. But my copied data is lost.
Sub Select_Copy_Paste()
'
'
Windows("ElektroFunctiesDatabase.xlsm").Activate
Sheets("PowerSupply's").Select
Range("A2:I6").Select
Selection.Copy
[Code] .........
' Here i need to do something to paste data into r.address?
Create a full copy of an open workbook (eg. activeworkbook MyFile.xls) using VBA, with the new copy (eg Book1.xls) open as well ,without having to save a copy first then open it ?
View 9 Replies View RelatedI have a workbook that has a lot of formulas in it that reference material stored on my local computer.
I need a macro that will copy all 42 tabs in to a new workbook book without all formulas, but saving all the formats have made. This would save me from every other day coping and pasting manually each of the pages.
I have in my Workbook_open a macro,called Workbook_SheetActivate
with a line : Msgbox ActiveSheet.Name ....
In a sheet I have a macro SortWorksheets ....
My problem is , when I run the macro SortWorksheets it always stopped
by each worksheet until the macro is ended, this because the macro by opening workbook.
How can I make the macro SortWorksheet in one run?