VBA To Copy Selected Rows In One Worksheet To The End Of A Table In Another Worksheet
Jun 22, 2006
I would like to be able to select several non-sequential rows in a worksheet called "Data" (using a check box or just entering a value in Column A) and then be able to press a Command button to copy the selected rows to another worksheet called "Estimate" at the bottom of a table, and delete the designators in Column A (i.e. deletes the value, or unchecks the boxes) so I can repeat the process again if needed.
View 7 Replies
ADVERTISEMENT
Sep 6, 2008
I have set up the attached workbook to try to show the results that I need using the matching shaded cells in the worksheets.
The first part of the problem is that all data in columns A, B, C & H (Input1) needs to be copied to columns A, B, C & F in Input2 with the addition of a Zero value in columns D & E (sample data lines 1 - 3).
The second part of the problem is that all data in columns A, B, & F (Input2) where the cell in column C is equal to ZERO needs to be copied to columns A, B & C in Input 3 (sample data Lines 4 - 11).
It would also be useful to be able to copy data in columns A, B, & F (Input2) where the cell in column C is NOT equal to ZERO to columns A, B & C in Input 3 (sample data Lines 12 - 25). However, there will be often be more than value in column C (Input2) dictated by the date in Column A and number in Column B. The value in Column F (Input2) will always be the same for each of those rows, so it does not need to be duplicated in Column C (Input3).
This would have to be manually triggered by linking it to a button or menu item, not sure what would be the best option. As data is entered at various times of the week, the routine would either have to overwrite existing matching data or carry on from where it last finished!
View 9 Replies
View Related
Feb 4, 2010
I am self-taught (arguably by a pretty shoddy teacher), and am determined to figure *some* of this stuff out. I need a code to look at the rows on one worksheet and based on the value of column A for each row, copy cells A through E in that row to cells A through E of a blank row on a corresponding worksheet. I found a code from another post that does just what I need it to with one small exception. The code was posted by DaveGuggs and is as follows:
View 2 Replies
View Related
Jan 16, 2008
As I am managing a few projects at once, I would like to create a To Dos List for each project (seperated by different worksheets). To make my life a bit easier, I hope to show all the To Dos which is due on a particular day on a separate worksheet. In other words, I am hoping to write a macro which allows me to copy all the relevant To Dos (of that day) from different worksheets and compiled it into a single list on a new worksheet.
Note:
1) Each row of To Do contains 3 columns, Date, Priority and Descriptions.
2) The To Dos for each project are NOT arrange in sequence by dates.
3) Number of project will increase over time, therefore the number of worksheets will also increase.
View 3 Replies
View Related
Jul 1, 2008
how to reference cells in 1 page from another and understand basic formula's, and would appreciate any input on how or if i can acheive what i'm trying to accomplish.
I have a worksheet with say 100 rows of information, it is a list of materials to go into a construction job. the columns to the right of the description calculate volume/quantity etc and produce a cost for the item. what i want to do is have a summary page that only lists the items that are being used, not all 100 items are in every job and i dont want to have to print the whole list with a bunch of empty values, which will just waste paper and ink. I'd like to enter a value in a cell or setup a check box or something that i could somehow use to then list that row or a part of that row of information on a seperate sheet, for a nice concise, easy to read list of job materials. i would like to do produce 1 sheet with the cost associated with the item, and one without cost.
View 9 Replies
View Related
Dec 24, 2011
How do I copy the selected cell to another worksheet instead of sheets("Interior") ?
Code:
Private Sub OptionButton1_Click()
With Range("B19")
.Font.ColorIndex = 3
.Copy Destination:=Range("P19")
Application.Goto Sheets("Interior").Range("C20")
End With
End Sub
View 3 Replies
View Related
Apr 21, 2012
I have a workbook that contains 50 worksheets named 1-50. I need to add more worksheets. all the formulas in the worksheets always refers to the previous worksheet.
How can i make a copy of the worksheet named 50, name it 51 and have all the formulas in worksheet 51 refer back to worksheet 50?
View 1 Replies
View Related
Dec 27, 2012
I need to copy certain values of multiple pivot tables of different worksheets into a new worksheet.
To be more clear I attached an example worksheet:
In "Sheet1_pivot table" and "Sheet2_pivot table" I have two pivot table with data divided by Area, Year, quarter and month.
In "Table" i have a summary table where, depending on the values of cell B2, B3 and B4, the summary table has different values copied from the 2 pivot tables.
I was thinking of a code like this but i have problems getting the values from the pivot tables
VB:
Sub else_if()
If Range("B2") = "North" And Range("B3") = "October" Then
ElseIf Range("B2") = "South" And Range("B3") = "October" Then
Else
.
.
.
.
Else
MsgBox ("Area not present")
End If
End Sub
View 2 Replies
View Related
Jan 17, 2007
now i have filtered data in a table, i want to use the results by printing off a table showing just these and the appropriate rows from other tables on worksheets. these all have a specific ID which is how they are traceable to each other. like a related field in an access database. two tables/worksheets are like so:
table1:
Reg No | Rank | Name | Initials | Troop | etc
table 2:
Reg No | JCLM1 | JCLM2 | SCLM1 | SCLM2 | etc
If i were to filter the second table by JCLM1 = YES then i want to create a printable list of all those but also to include the related records from table 1. is this possible?
View 2 Replies
View Related
Apr 13, 2009
look for a certain value in worksheet A and copy that row of data to Worksheet B.
However, it seems to be only copying the row in worksheet A and pasting it. Is there something that a noob VBA scripter has missed out?
PHP Private Sub GetInfo_Click()
Dim r As Long, LastRow As Long, Status As Integer
Dim Message As String, Title As String, Default As String, MyValue As String
Application.ScreenUpdating = False
MyValue = Range("A4").Value
Workbooks("invoice.xls").Worksheets("A").Activate
LastRow = Range("C65536").End(xlUp).Row
For r = LastRow To 1 Step -1
If Cells(r, 1).Value = MyValue Then
Rows(r).EntireRow.Copy
Workbooks("invoice.xls").Worksheets("B").Activate
Rows("8").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Status = 1
Workbooks("invoice.xls").Worksheets("A").Activate
Rows(r).EntireRow.Delete
Exit For
End If
Next r
Application.ScreenUpdating = True
View 2 Replies
View Related
Jul 24, 2012
Workbook contains the following sheets : PIR TrackerChartsSAMPLEFINALValidations
When a change occurs on PIR Tracker, the following occurs:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Application.ScreenUpdating = False
Dim Rng As Range
Set Rng = Intersect(Target, Range("A1:A500"))
[Code] .....
I also want the pivot tables on SAMPLE and FINAL to be updated. What do I need to do?
View 3 Replies
View Related
Sep 2, 2013
The new worksheet is created to the left of the existing source worksheet.
View 2 Replies
View Related
Oct 23, 2007
I've tried my best to describe my dilema. I import data in an SQL query from a mainframe. This data shows a job number, site address, job number and a length. Multiple lengths on the same site appear as separate entries. I use a pivot table to calculate a total length and also formulas to determine whether a site is in an East or West area. I then need to then be able to copy the 'East' jobs to an 'East' worksheet and the 'West' jobs to the 'West' worksheet. But, I only want a site to appear once with the total length.
View 2 Replies
View Related
May 10, 2009
This is a simple macro that copies the rows from one worksheet to another, but how do I get it to copy the values only and not the formulas?
View 2 Replies
View Related
Apr 8, 2009
Post1:
I need a macro that will search column R for a date, and search column E for a value (Signature, Revised Signature or Custom Finals). When those conditions are met, certain cells (C,D,E,F & M) need to copy over to another sheet. Also certain cells in that row have formulas (I,J,Q & U) that need to be copied over. Both sheets have the same column headings, A5-U. Everytime the macro is run I need it to look at column C to see if the project # (ex. 0901234) is the same, I don't want duplicate project numbers in sheet 2.
Post 2:
Sheet 1 is (Assignment List), Sheet 2 is (Cut Sheet). The dates are in this format m/d/yy. The column heading is in the same order. Column R is the completed date in the "Assignment List" sheet. In column E, if it reads Approval and column R has a completed date i don't want it to copy over, but if it reads Signature, Revised Signature or Custom Finals and it has a completed date i want it to copy into the (Cut Sheet) sheet starting at row A6.
View 10 Replies
View Related
Mar 17, 2008
There is a sales sheet which basically produces a sales receipt and a report sheet which should keep track of all the items sold. so i was wondering how a simple do loop or equivalent command could be used to copy about 15 rows (6 cells from each row) from the sales sheet to the report sheet (technically starting from the first available empty row in the report sheet) each time a sales receipt is produced.
View 3 Replies
View Related
Nov 15, 2013
Count all the true statements in column A (Work) of sheet1 (Checklist), once counted insert that many rows on sheet2 in a specific location, I found a count formula just don't know how to do the insert rows part
Code:
Sub CountRows()
Dim Rng As Range, CountTrue As Long
Set Rng = Sheets("Checklist").Range("Work")
CountTrue = Application.WorksheetFunction.CountIf(Rng, "True")
End Sub
View 3 Replies
View Related
Sep 2, 2008
1. Find a text "State" in column 5 of a active sheet and copy that particular row to a new worksheet "Summary" including the header row.
2. Loop through other worksheets and add results to "Summary worksheet" without the header row.
View 11 Replies
View Related
Jun 17, 2009
I have a spreadsheet with columns set up like this: RowName, Date, Value1, Value2, Value3 etc. The date is in format YYYYMMDD. What I am trying to do follows, in some sort of pseduo fashion.
View 2 Replies
View Related
Oct 13, 2009
Worksheet (Daily Sales) - daily input, copy to the worksheet (Weekly Sales), Monday through Saturday. The ranges copied are not consecutive. I am using If...then...else.
View 6 Replies
View Related
Mar 12, 2002
I haven't mucked about with Excel in quite a while now and have been asked to do a module in Excel 2000.
When given a workbook (tej-exit.xls) which has one worksheet of thousands of rows with columns from A to AS, i would like to copy all rows which have a zero in column N to a new worksheet.
Is this difficult?
Would i have to have one workbook with the code module in, load up the tej-exit.xls file ?
View 9 Replies
View Related
Feb 2, 2007
I have 2 worksheets in a workbook: "Orders" and "History". Both sheets contain the exact same columns. The "Orders" page data gets wiped clean at the start of each month. What I'm looking for is a macro solution that will copy any new rows and update any old ones that have changed on the "Orders" page to the "History" page, so we can keep a running history of sales. Ideally, I'd like the macro to fire only when performing a Workbook Save or Workbook Save As.
"History" is in date order, so adding new entries from "Orders" should be easy, just by adding rows to the bottom. Updating existing rows will be harder, because I want it to update if the row has changed but not be deleted or changed when the "Orders" sheet is wiped clean the 1st of the month.
Additional:
The columns in both sheets are:
Order Date
Ship Date
Order Number
Customer
Item
Qty
Amount
Because each item gets a seperate line, there will be rows that have identical Order Date, Ship Date, Order Number, and Customer entries, so I suspect I will need to compare multiple columns when deciding if one has changed (the only column that *should* change after initial entry on the orders page is the Ship Date, which would initially be left blank when the order is first entered).
View 9 Replies
View Related
Sep 15, 2007
I have used marcos to create two worksheets and need to compare each row of the first three columns in each worksheet to find any rows which non-matching data. I am comparing retrieved data (Worksheet1) against a master list (Worksheet2) to ensure the retrieved data was entered correctly. The three columns of data include Manufacturer, Lot number and Date.
The row in which the matches will occur is random. The three values from the retrieved data only have to find a match somewhere in the master list. I can place both the retrieved data and the master list side-by-side on the same worksheet if that would make things more efficient for running the comparison.
The non-matching rows, if found, will be copied over to another worksheet along with its corresponding row in columns "D" and "E" found in Worksheet1. The additional data alerts me to the location where the data was entered incorrectly. The master list does not have any location data in it.
View 5 Replies
View Related
Apr 11, 2008
I have filtered data on Sheet1, which I need just columns A, B & C combined and placed on Sheet2. The below code works, but its defined to copy all rows. I'm unsure of what syntax to use for the loop to copy just the filtered data. Also is there a way to "cycle" through the filters? Example Autofilter "1984" copy ABC to Sheet 2, then AutoFilter "1985" copy to sheet 2 and so on?
For Each Cell In Sheets("sheet1").Range("A:A")
If Cell.Value <> Empty Then
i = i + 1
b = Cell.Offset(0, 0).Value & ", " & Cell.Offset(0, 1).Value & " " & Cell.Offset(0, 2).Value
Sheets("sheet2").Range("A1").Offset(i - 1, 0) = b
End If
Next Cell
View 9 Replies
View Related
Feb 6, 2008
The following code inserts a row below the selected row, and copies the formula of the row above into it.
Dim Rw As Integer
Rw = ActiveCell.Row
Selection.Insert Shift:=xlDown
Rows("" & Rw - 1 & ":" & Rw - 1 & "").Copy
Rows("" & Rw & ":" & Rw & "").Paste
However, I need to alter this to work for inserting more than one row at a time. ie. the user selects 'x' number of rows and 'x' rows are inserted below (in the same way 'Insert Row' works in Excel) and the row above the selection is copied down.
View 2 Replies
View Related
Nov 22, 2006
I have written code that allows a user to copy, via a button, a certain sheet any number of times. They can choose to copy that sheet 5 times and then 10 times, etc.
When the sheet tries to be copied for the 17th time, it fails with the following message: "Run-time error '1004':
Method 'Copy' of object '_Worksheet' failed"
Here is the code that I have. The second line is the line that is failing.
Worksheets("RoedForm").Select
Worksheets("RoedForm").Copy After:=Worksheets(iCount)
This always fails on the 17th copy regardless of how many different combinations of copy sheets the user tries. There are several sheets before the sheet that is to be copied and I have deleted several of those to see what happens and it still fails on the 17th copy. I also have 1GB of memory, so I don't believe that memory is an issue.
View 3 Replies
View Related
May 3, 2013
coding a VBA macro for one of my workbooks, in which I need to be able to hide/unhide various rows in one worksheet depending on the value of a cell in a worksheet elsewhere in the workbook. The rows start off hidden by default.
As a simplified example:
Worksheet1 has a cell that has option "Set 1," and "Set 2." Worksheet2 has two sets of rows (say, 20:30 and 40:50) that need to be hidden/unhidden depending on the cell in Worksheet 1. These are hidden to start with!
So if Worksheet1's target cell says "Set 1", then on Worksheet2, rows 20:30 would stay hidden and rows 40:50 would be revealed, and then if the target cell says "Set 2," then on Worksheet 2, rows 40:50 would then be hidden, but rows 20:30 would then be revealed.
I was thinking of using something like this:
Rows("20:30,40:50").EntireRow.Hidden = True
If Target.Address="'Worksheet1'!A1" Then
If Target.Value = "Set 1" Then
Rows("40:50").EntireRow.Hidden = False
Else
Rows("20:30").EntireRow.Hidden = False
End If
End If
I think this might work, but every time I try to run this I get various errors, like not referencing my target cell correctly.
View 5 Replies
View Related
Mar 9, 2014
Every day, I receive a datasheet from which one column is filled with different dates. I like to select only the rows with future dates to copy it to another workbook. I tried Advanced Autofilter without succes as I cannot pick the right criteria (I see today, next week, next month but not all something like to select all future dates).
View 9 Replies
View Related
Aug 7, 2014
In sheet Model RC BOM I am trying to copy all the rows under Level 1 (row 3), including level 1, until it reaches the next Level 1 (row 537) (not including row 537), and paste those cells in next tab (BIW) starting at row 2. The next operation is to copy all rows under Level 1 (row 537), including level 1, until it reaches the next Level (row 827), not including row 537, and paste those cells in the next tab (Chassis) starting at row 2.
The challenge is that I cannot use the row numbering in sheet Model RC BOM as a reference for coding because the content will change every week.
View 5 Replies
View Related
Aug 10, 2014
I am making a workbook for our 4H horse shows. I want to be able to list the kids on the first page and check off (x in the cell) which classes they will be entering and then have the program move their info to each of the specific class worksheets where we will record the results. I'd like to move rows A thru E to each applicable class sheet. I've attached the workbook.
View 6 Replies
View Related
