There is a sales sheet which basically produces a sales receipt and a report sheet which should keep track of all the items sold. so i was wondering how a simple do loop or equivalent command could be used to copy about 15 rows (6 cells from each row) from the sales sheet to the report sheet (technically starting from the first available empty row in the report sheet) each time a sales receipt is produced.
View 3 RepliesI would like to be able to select several non-sequential rows in a worksheet called "Data" (using a check box or just entering a value in Column A) and then be able to press a Command button to copy the selected rows to another worksheet called "Estimate" at the bottom of a table, and delete the designators in Column A (i.e. deletes the value, or unchecks the boxes) so I can repeat the process again if needed.
View 7 Replies View RelatedThis is a simple macro that copies the rows from one worksheet to another, but how do I get it to copy the values only and not the formulas?
View 2 Replies View RelatedPost1:
I need a macro that will search column R for a date, and search column E for a value (Signature, Revised Signature or Custom Finals). When those conditions are met, certain cells (C,D,E,F & M) need to copy over to another sheet. Also certain cells in that row have formulas (I,J,Q & U) that need to be copied over. Both sheets have the same column headings, A5-U. Everytime the macro is run I need it to look at column C to see if the project # (ex. 0901234) is the same, I don't want duplicate project numbers in sheet 2.
Post 2:
Sheet 1 is (Assignment List), Sheet 2 is (Cut Sheet). The dates are in this format m/d/yy. The column heading is in the same order. Column R is the completed date in the "Assignment List" sheet. In column E, if it reads Approval and column R has a completed date i don't want it to copy over, but if it reads Signature, Revised Signature or Custom Finals and it has a completed date i want it to copy into the (Cut Sheet) sheet starting at row A6.
1. Find a text "State" in column 5 of a active sheet and copy that particular row to a new worksheet "Summary" including the header row.
2. Loop through other worksheets and add results to "Summary worksheet" without the header row.
I have a spreadsheet with columns set up like this: RowName, Date, Value1, Value2, Value3 etc. The date is in format YYYYMMDD. What I am trying to do follows, in some sort of pseduo fashion.
View 2 Replies View RelatedWorksheet (Daily Sales) - daily input, copy to the worksheet (Weekly Sales), Monday through Saturday. The ranges copied are not consecutive. I am using If...then...else.
View 6 Replies View RelatedI haven't mucked about with Excel in quite a while now and have been asked to do a module in Excel 2000.
When given a workbook (tej-exit.xls) which has one worksheet of thousands of rows with columns from A to AS, i would like to copy all rows which have a zero in column N to a new worksheet.
Is this difficult?
Would i have to have one workbook with the code module in, load up the tej-exit.xls file ?
I have 2 worksheets in a workbook: "Orders" and "History". Both sheets contain the exact same columns. The "Orders" page data gets wiped clean at the start of each month. What I'm looking for is a macro solution that will copy any new rows and update any old ones that have changed on the "Orders" page to the "History" page, so we can keep a running history of sales. Ideally, I'd like the macro to fire only when performing a Workbook Save or Workbook Save As.
"History" is in date order, so adding new entries from "Orders" should be easy, just by adding rows to the bottom. Updating existing rows will be harder, because I want it to update if the row has changed but not be deleted or changed when the "Orders" sheet is wiped clean the 1st of the month.
Additional:
The columns in both sheets are:
Order Date
Ship Date
Order Number
Customer
Item
Qty
Amount
Because each item gets a seperate line, there will be rows that have identical Order Date, Ship Date, Order Number, and Customer entries, so I suspect I will need to compare multiple columns when deciding if one has changed (the only column that *should* change after initial entry on the orders page is the Ship Date, which would initially be left blank when the order is first entered).
I have used marcos to create two worksheets and need to compare each row of the first three columns in each worksheet to find any rows which non-matching data. I am comparing retrieved data (Worksheet1) against a master list (Worksheet2) to ensure the retrieved data was entered correctly. The three columns of data include Manufacturer, Lot number and Date.
The row in which the matches will occur is random. The three values from the retrieved data only have to find a match somewhere in the master list. I can place both the retrieved data and the master list side-by-side on the same worksheet if that would make things more efficient for running the comparison.
The non-matching rows, if found, will be copied over to another worksheet along with its corresponding row in columns "D" and "E" found in Worksheet1. The additional data alerts me to the location where the data was entered incorrectly. The master list does not have any location data in it.
I have filtered data on Sheet1, which I need just columns A, B & C combined and placed on Sheet2. The below code works, but its defined to copy all rows. I'm unsure of what syntax to use for the loop to copy just the filtered data. Also is there a way to "cycle" through the filters? Example Autofilter "1984" copy ABC to Sheet 2, then AutoFilter "1985" copy to sheet 2 and so on?
For Each Cell In Sheets("sheet1").Range("A:A")
If Cell.Value <> Empty Then
i = i + 1
b = Cell.Offset(0, 0).Value & ", " & Cell.Offset(0, 1).Value & " " & Cell.Offset(0, 2).Value
Sheets("sheet2").Range("A1").Offset(i - 1, 0) = b
End If
Next Cell
Every day, I receive a datasheet from which one column is filled with different dates. I like to select only the rows with future dates to copy it to another workbook. I tried Advanced Autofilter without succes as I cannot pick the right criteria (I see today, next week, next month but not all something like to select all future dates).
View 9 Replies View RelatedIn sheet Model RC BOM I am trying to copy all the rows under Level 1 (row 3), including level 1, until it reaches the next Level 1 (row 537) (not including row 537), and paste those cells in next tab (BIW) starting at row 2. The next operation is to copy all rows under Level 1 (row 537), including level 1, until it reaches the next Level (row 827), not including row 537, and paste those cells in the next tab (Chassis) starting at row 2.
The challenge is that I cannot use the row numbering in sheet Model RC BOM as a reference for coding because the content will change every week.
I am making a workbook for our 4H horse shows. I want to be able to list the kids on the first page and check off (x in the cell) which classes they will be entering and then have the program move their info to each of the specific class worksheets where we will record the results. I'd like to move rows A thru E to each applicable class sheet. I've attached the workbook.
View 6 Replies View RelatedI have set up the attached workbook to try to show the results that I need using the matching shaded cells in the worksheets.
The first part of the problem is that all data in columns A, B, C & H (Input1) needs to be copied to columns A, B, C & F in Input2 with the addition of a Zero value in columns D & E (sample data lines 1 - 3).
The second part of the problem is that all data in columns A, B, & F (Input2) where the cell in column C is equal to ZERO needs to be copied to columns A, B & C in Input 3 (sample data Lines 4 - 11).
It would also be useful to be able to copy data in columns A, B, & F (Input2) where the cell in column C is NOT equal to ZERO to columns A, B & C in Input 3 (sample data Lines 12 - 25). However, there will be often be more than value in column C (Input2) dictated by the date in Column A and number in Column B. The value in Column F (Input2) will always be the same for each of those rows, so it does not need to be duplicated in Column C (Input3).
This would have to be manually triggered by linking it to a button or menu item, not sure what would be the best option. As data is entered at various times of the week, the routine would either have to overwrite existing matching data or carry on from where it last finished!
I have created a worksheet which contains seven columns of data and many rows. I need to copy entire rows into nine separate worksheets depending on the data in column G.
I know nothing about VBA but have read enough to realize this is the way to go with this. Would someone point me in the right direction on how to set this up? I've attached the file so you can better see what I'm talking about.
is it possible to Copy Rows to a multiple tabs on a New Worksheet using a start date and end date as reference?
I have a button (named Draw Report) on the Raw Data xls. should copy tickets uniquely on a new workbook, by uniquely - no duplicates on the new workbook on a given date range.
Will it be possible to separate them into tabs according to values under Assigned to (Transaction 1, 2, 3)?
Could we also copy the exact 2nd worksheet (Report) on the Raw Data xls on the Output.xls?
The Output would contain 4 tabs: Report, Transaction 1, Transaction 2, Transaction 3)
I have a workbook made up of 10 worksheets or so. Each of the rows in each worksheet includes the age of a case in column H. I want to copy the rows that show a case that is over 90 days of age, I then want to paste these into another worksheet. I want to do this for each of the ten worksheets.
View 6 Replies View RelatedI've been tasked with redoing a revenue report at work, and in my head I've conjured up what could potentially be a huge time saving way of doing things in the future, although have searched help files and looked around online and can't find the formula/macro (if it exists) to enable me to do this.
The problem is this:
Sheet 1 of the workbook is a large input sheet. Every row contained in that sheet will, in column A, be titled 'red', 'yellow' or 'green'. Columns B onwards contain other data which (at the moment) is irrelevant to the problem.
Now what I want excel to do after I've put the raw data into the input sheet (sheet 1), is to read the text in column A for each row, then automatically copy ALL data in that row over to the next empty row on another worksheet.
ie Sheet 2 will have all rows that have 'Red' in column A on the input sheet, Sheet 3 will have all those titled 'Yellow' and Sheet 4 will have all those titled 'Red'.
I know I can use a filter on the input sheet to just show the data I want, but each colour coded row will contain different data to another, and if there is a formula/macro setup i can use to do the above, then I can set the subsequent worksheets up to hide the superflous columns from the input sheet.
I have two worksheets.
Worksheet 1 is a large data sheet containing columns of data (Date, State, Payment Method, etc, etc)
Worksheet 2 is the 'Report' worksheet with 2 blank cells (A1 and A2) for users to manually enter the Start and End dates, a drop-list for State names (B1) and a drop-list for Payment Method (C1) - Cash or Credit Card.
How can I write a macro to:
1) Filter by Start and End Dates then,
2) Filter by State name then,
3) Filter by Cash or Credit Card then,
4) Copy these filtered records (i.e. whole row/s) onto the 'Report' worksheet starting at Column A, Row 5.
5) Macro to end with a 'Successful' message.
I'm trying to get a VBA code that will allow me to copy and paste rows based on a date range, for example
Column A = (Blanc)
Column B = Line Number
Column C = Date
[code]....
i need to have a pop up box that i can input the start date and then another pop up for the end date (mm/dd/yyyy), then using these dates copy the whole row which are within the date range to another sheet called Summary.
I need to get a function that can copy some rolls in a worksheet 1 to worksheet 2 by sorting worksheet 1 according to column A of that sheet. I have attached a sample of what i intent doing for bether understanding.
View 2 Replies View Relatedi have a workbook with over 600 worksheets and any vba code to do the following.... (each worksheet contains different number of lines)
At the moment the data is in columns a to d
What i need is the data currently in cell a1 (in each worksheet) to appear beside every line in that worksheet
Then i need to take all this data and put it onto one single worksheet .
I need a macro that will search data from a range of cells in one column for multiple criterias and them copy the entire rows to a new worksheet.
Example I have a list of group names
Network
Telcom
Help Desk
BA
Network
I only want to choose all Network and Telcom rows copy to another worksheet.
I have seen all kinds of copying routines, but haven't been able to get what I want.
1. Copy Row contents from activeworksheet
2. The activeworksheet will have various row counts
3. The activeworksheet has row 1 as header.
4. The criteria to use is in the current worksheet columns P through Z
5. The criteria to look for is the word inspect. only the word inspect, not words that contain inspect (i.e. "inspection") should not be found.
6. The word could be in column P and in S, but needs to be only copied once, becuase it has meet the criteria, but it also could only be in c
7. Copying the row into a Sheet named "Inspection"
As a bonus would be cool to be able to copy certain cells or the entire row.
if there's a macro that can be run to check one worksheet. In this worksheet there is a column where the value should be "true". If this value is true, I'd like to copy the entire row of data into another worksheet.
There can be multiple rows of data where this condition is met.
I am trying to find a way of copying values from cells that are linked to another workbook and paste them to another sheet in same workbook to the end of last row entry. This needs to be done via VBA from a button. There are 35 rows and 9 columns linked to another workbook and they don't always have values (depending on source workbook). To cycle thru each row and copy if they have values and paste them to end of last used row on another sheet.
View 6 Replies View RelatedI worked on a workbook which has multiple worksheets( mine has 6). The data doesn't start from A1. I want to copy the data from each worksheet into a sheet called summary. I want to create the macro that would only copy the heading row once.
WB test.xlsxWB test.xlsx
What I am trying to do is to look at specific columns, then copy the data in that column from specific rows from sheet 1 (named TIA) to sheet Macro1. I think uploading a sample of the spreadsheet would be useful.
Unfortunately the spreadsheet is a living document and continues to grow in both column and rows.. The data extracted at this point is from row 7, 23-60 and copied into the new worksheet starting at A1.
Requirements:
1) Row 5 states the macro the column will be associated with. There can be more that one macro associated to a column.
2) When column is found, data from row 7 column (x) will be copied to sheet macro1 EX. If Cell G5 = macro1 then copy data from G7 to sheet macro1 at A1
3) When column is found, data from row 23 column (x) will be copied to sheet macro1
4) repeat requirement 3 till no more Scenario's
I am self-taught (arguably by a pretty shoddy teacher), and am determined to figure *some* of this stuff out. I need a code to look at the rows on one worksheet and based on the value of column A for each row, copy cells A through E in that row to cells A through E of a blank row on a corresponding worksheet. I found a code from another post that does just what I need it to with one small exception. The code was posted by DaveGuggs and is as follows:
View 2 Replies View Related