I have a data extract that gets generated at the end of each month that I post into the 'Full Extract' tab on my example spreadsheet.
writing a macro that will divide the various items in the 'Extract' based on the Reference, (some items may need to go into multiple sheets)
then draw down the formulas that need to be applied to the item.
i want to divide two cells from different sheets using a macro
i have this at the moment
='Cost Sheet A'!$L138/'Cost Sheet A'!$AD155
and have gathered that i can divide 2 cells that are in the same sheet using macros
but i want to link to two different sheets using a macro
I have a very long string of characters inside one cell.
Now, I would like to divide this string into multiple rows and I know that next row should start after each 80 character. In other words, 81th character is a start of a new row.
How can I do that?
I have a 52 (one for each week) page workbook. I am trying to average cell J9 for the entire 52 pages. However the information is not added to the cell until the end of the week so week 30-52 all have 0s and should not be counted in the dividing number. Is there a way to have Excel count the number of cells that have a number (not 0) and divide the sum of the cells but that number.
=(WK1!J9+.....WK52!J9) / (counted number of cells not = 0)
The data is spread across worksheets however the first column of every worksheet contains same data (eg. Name). Evenso, the rows wont correspond each other across worksheets. eg.
WS1
Name: Variable 1: Variable 2
John : X : Y
Mary : A : F
Mary : F : W
Lance : E : G
Lance : R : T
Lance : D : W
Neil : R : H
Neil : H : S
WS2
Name: Variable 1: Variable 2
John : X : Y
Mary : A : F
Lance : E : G
Lance : D : W
Neil : R : H
Neil : H : S
Neil : G : W
Is there anyway to correspond these rows and add blank rows so that if Lance is in 3 rows in WS 1 it will be the same in WS 2 as well even though some rows are blank? And vice versa?
I have conditional formatting on a cell based on a formula, when I entered the solution of "if then 0 " but the cell doesn't see the result as a 0, if I manually enter the 0 the conditional format works.
I even tried putting the formula in another cell and then referencing to that cell, still didn't work...
The "divide by zero error won't trigger the conditional either......
[Code] ....
If I have a value of lets say 53, I need it broken down into equal and whole numbers across the spread sheet with the last one being the remaining value.
Currently for example in cell F5 I have a value of 41 that I need to break down so
I have done the following:
In Cell P5 =IF(F5>=25,F5-21,F5)
Then in Cell Z5 =IF(P5>=25,P5-21,P5) and this goes on until I have zero value from the original value in the last cell can i not do this all in one formula and have the results populate in other cells.
I am creating a 'weekly average spreadsheet' (Excel 2007) for a teacher. It has a column for each student's name and his test grade for each day (M-F). The last column gives his weekly average.
She also needs an average for all the students' for the week (vertically). My formula is correct, i.e., =AVERAGE(H2:H11). However, I'm getting a divide by zero error because I have some blank rows above my formula (so she can add new students' names as they come.
How can I get rid of the divide by zero error so she can see the running averages as she inputs grades (but still leaving empty rows for new names)?
I have just started to try and learn VBA for excel. the resource I have been using are books and the WEB. Some how, not sure how there was/is some code where all enteries in all worksheets are divided by 100, i.e if I enter 2222 after clicking the enter button the result in the cell is 22.22. I have deleted all macros and code however the problem still exist.
View 3 Replies View Related
If CheckBox1.Value = True Then
Range("e25") = ComboBox6.Value
ElseIf CheckBox2.Value = True Then
Range("e25") = ComboBox6.Value / 2
End If
Im getting an error on the second to last row, Ive never tried to divide using VBA before and I have no idea how to!
Also the amount im trying to divide will always be in the format hh:mm
I have a database that requires me to find the average of some data over several columns, however if one of the values I have to divide by is a zero I get a 'Can't Divide By Zero Error' is there any way to override this ? So that if a Divide by Zero Occurs, instead of returning a 'Can't Divide By Zero Error' it just replaces it with a Zero instead ?
View 6 Replies View RelatedHi i have the below code which runs on deleting duplicate code which i found in an excel manual. I am having some trouble as i want to convert the code so that it will run on all worksheets i have which are numbered such as 1,2,3,4 etc.
This is so it makes the workbook easy maintenance for when deleting or adding worksheets which happens quite regularly.
I have a single workbook with 55 worksheets. I need to delete rows #1-14, then delete columns A & B on all worksheets. The macro below seems to be running in a loop which appears to delete rows 1-14 and columns A & B until there is no more data left on the active sheet only. It does not run on any of the other sheets - even if I select all sheets before running the macro.
View 4 Replies View RelatedWhat I'd like to do is to have the block of rows starting from "Agent:" and ending with "Total" copied into a separate worksheet and then have the worksheet named using the agent's name. I have highlighted the data in yellow in the attached reference file. I would like to have this done for all 58 agents. I could copy and paste manually but that wouldn't be the smartest way to go about this. I figure I probably need a looping structure for this but I am not yet proficient enough to figure this out quickly. I am supposed to have this done today.
Edit: The last part of this would be to have blocks of rows from the "sections" worksheet which use identical agent names also pasted below the data from the "questions" worksheet. I have attached the workbook I am working on now cutting and pasting manually.
I have a workbook containing several sheets. New worksheets may be added. From each sheet, I would like to print the first row in range (AB1:AE200) along with any rows below the first that contains the value “Red” in column AB. From what I have been reading, it would seem that a temporary worksheet would be the answer using a copy/paste.
As each sheet would likely contain only three or four rows to then print, is there a way then to get all the data onto a single page, thereby preventing the need to print a single page for each sheet?
I currently have dozens of sheets within a workbook and require empty lines to be removed from each page. I already have a working code to delete the lines but I now need to be able to apply this macro across all sheets in one go. I have included a sample excel sheet with the ‘delete blank rows’ macro and also the code I have been trying to use (without success) to apply the macro across all sheets. The apply macro to all sheets I’ve been trying to use is:
Sub AllSheets()
Dim ws As Worksheet
For Each ws In Worksheets
Next ws
End Sub
I am not a programer by trade so I can't figure out what I need to do to solve my problem. I need to compare two worksheets to each other and only keep the rows of data that match. I am comparing address's in each worketsheet with each of them located in column C in each worksheet.
View 4 Replies View RelatedI am working a project to move data from Rows 4:35 on a large number of worksheets (all in the same workbook) to Sheet 1 of the workbook by " looping through sheets". I need the data to be compiled. I am a novice at VBA, the code below was given to me (LoopthroughSheets) and the middle portion is a macro I recorded. I cannot get them to work together.
Sub LoopthroughSheets()
Dim ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
Rows("4:35").Select
Selection.Copy
Sheets("Sheet1").Select
Selection.Insert Shift:=xlDown
On Error Resume Next 'Will continue if an error results
ws. Range("A1") = ws.Name
Next ws
End Sub
I have two sheets with many rows and about 8 columns. The second sheet is some of the rows copied and pasted from the first sheet. I have been asked to mark on the first sheet those rows that have been copied to the second sheet.
I need to check that the entire row matches before somehow making the corresponding row in the "original" sheet stand out.
Unfortunately, there is no unique identifier that I can search by. I have tried concatenating all columns into a new column on each sheet and then using MATCH but I get #VALUE! error.
I have minutes of meeting and have to divide them into different sheets against completed, and different departments and dept HOD responsible for it. How do I do it without "Copy/Pasting" the code? Also I have to remove the ones that are done. Any macro or something that can be written for these.
format of sheet
Sl No. | Date | Remarks | Dept | Dept Head 1 | Dept Head 2 | Status
I have to get data into different sheets against Dept, Dept Head 1, Dept Head 2 and remove the "Done" status to different sheets.
How do I do it without manual labor?
I have 10 years from 2003 to 2012 and need to divide this into 2 categories pre-cisis and post-crisis. How can I do that?
View 3 Replies View RelatedI am working on my thesis empirical part now I have 10 years from 2003 to 2012 and need to divide this into 2 categories pre-cisis and post-crisis. How can I do that?
View 10 Replies View RelatedExcel has a QUARTILE function to divide a population into quartiles. I'm trying to do something similar but divide a population into deciles (i.e., every 10%). Is there any easy way to divide a large population into deciles and to assign a decile to each value in the population (i.e., top 10%, 11-20%, 21-30%, . . . bottom 10%)?
View 2 Replies View RelatedI'm lost on VBA, but I have been successful at recording a few extremely simple macros. I have a number of pdf statements that I have run through OCR, and the OCR often misses the decimal point so that 43.85 comes out as 4385. (this is in dollars, so everything has 2 decimals).
These cells are usually pretty easy to spot, so I want to select that cell, press a keystroke or 2, and divide the value in that cell by 100. I assumed that by selecting "relative cell references", and recording a macro with the keystrokes "<F2>/100<HOME>=" (without the quotes, of course), I would accomplish that. But instead, it places a constant in that cell, with the value obtained in the cell where I recorded the macro.
=1/25%
is it that you want a UDF
Function MyFun(a,b)
MyFun = a / b
End Function
Usage:
=MyFun(1, 25%)
Mangesh
"Gonecoastal1" <Gonecoastal1@discussions.microsoft.com> wrote in message
news:B257DADD-0042-4CF8-88DF-1D17AEAFF627@microsoft.com...
I may not even be calling it the right thing. but let me explain what i'm looking to do. i've got three columns on a spreadsheet and i need to be able to add two columns together and then divide the sum by another column. so something like this:
4+4/636 = 79.5
d2+f2 (divided by) h2 = 79.5
I really struggle with the following scenario:
A1=5 B1=4 C1=0 D1=0 E1=5
What I want to do is to divide the sum of those cells with the number of cells with a value > 0 (but all cells must be controlled to check if the value > 0).
In real life it's easy to see that I want to do 14/3 (A1>0, B1>0 and E1>0 equals three cells), but how to write this formula in Excel?
How to divide two cells if there is no text in the first?
i.e.: if there is text display a 0 and if there is a number to divide it with a second number in another cell.
I am trying to divide the total of two groups of cells and I used the following formula:
=sum(B3:M3)/(B17:M17)
However, that is not a correct formula.
I'm trying to divide the value in column A by the data in B:AO using VBA, however I need to repeat this for many rows (the values differ for each row).
There could also be a different amount of rows with data in each time, and there is also a single blank row after every 18 rows with data.