=1/25%
is it that you want a UDF
Function MyFun(a,b)
MyFun = a / b
End Function
Usage:
=MyFun(1, 25%)
Mangesh
"Gonecoastal1" <Gonecoastal1@discussions.microsoft.com> wrote in message
news:B257DADD-0042-4CF8-88DF-1D17AEAFF627@microsoft.com...
I am familiar with the SUMPRODUCT function, but is there a similar function that will divide the cells of two columns and then add them together?
View 3 Replies View RelatedI am wondering if it is possible to create a formula in a cell that will divide whatever number is entered into that cell by a set or fixed number.
ie. I enter the number 9 in the cell and when I press enter, the 9 is instantly divided by 15 and the answer is displayed in the cell where I just typed the 9.
I having a bit of trouble entering numbers in Excel, every time I try to enter a number it seems to divide it by 100. For example : - 1 entered in to a cell becomes 0.01, 100 becomes 1....etc. I've tried formatting the cells and had no luck, tried Tool>Options but not sure where to look.
View 2 Replies View RelatedI really struggle with the following scenario:
A1=5 B1=4 C1=0 D1=0 E1=5
What I want to do is to divide the sum of those cells with the number of cells with a value > 0 (but all cells must be controlled to check if the value > 0).
In real life it's easy to see that I want to do 14/3 (A1>0, B1>0 and E1>0 equals three cells), but how to write this formula in Excel?
I have an array in my code and I need to divide each elements of the array with a constant.
View 9 Replies View RelatedI have a lot of cells containing numbers. Some numbers are small, some are big.
I want to divide all numbers which are greater than 300 by 1000.
IF cell A2 > 300 THEN divide by 1000.
How to do that? Is it possible to convert value in the same cell like using conditional formatting principle?
I basically have lots of lists of 12 cells. how ever some of those lists contain errors (e.g instead of having 12 numbers it will only have 10)
so instead of doing =sum(a1:a12)/12 i want to divide by the amount of numbers in that area in this case 10 so i can get an average.
I am trying to add 2 groups of cells and then divide the number by 60?
I can't get it to divide? It will only total.
=SUM(T807:T832)+SUM(T837:T846)/60
I have a simple formula that adds two numbers and divide the result by another number
K1: SUM(E1,F1) / H1
K2: SUM(E2,F2) / H2
K3: SUM(E3,F3) / H3
K4: SUM(E4,F4) / H4
K5: SUM(E5,F5) / H5
etc, etc
and then I average the results
AVERAGE(K1:K5)
etc, etc
When H1, H2, H3, etc is 0, it generates a #DIV/0! (since you cannot divide by 0)
I want a formula that I everytime a H1, H2, H3, etc is 0, I want to set it to a specific number H1, H2, H3, etc to 15.00
For example:
IF (H1 = 0, 15.00, sum(E1,F1) / H1)
If the number provided (H1) is 0, set it to 15.00, otherwise add the two numbers (E1, F1), and divide this result by the number provided (H1)
But this is where the problem is:
In every single cell that I have NOT yet provided information, it treats the BLANK cells as if it was 0, and has set every single cell to 15.00.
I have a sumproduct formula, I am trying to divide the output by the number of members used in the calculation:
This is my data set
4/10/2014102.6214/10/201499.5144/8/2014106.144/8/2014105.4
4/9/2014102.3284/9/201499.3864/2/2014105.8734/7/2014103.6
4/8/2014102.0884/8/201498.7953/17/2014105.5864/3/2014103.95
my sumproduct function is adding up all items that fall on that date which is fine, but i would love to calculate an average so divide by the number of items that were used in the calculation, is that possible?
=SUMPRODUCT(--(A1:G9=A11),(B1:H9))
I need a formula that will divide a number and if the answer is greater than a 100 then blank.
i've been using this =IFERROR(SUM(H4/C4,"",IF(K4>100,""))) but no luck.
I'm trying to create a formula which will allow me to do the following
1. Enter the number of jobs received
2. Divide it by the staff available without ending up with decimals.
As an example. Say I have 60 jobs to be allocated and there are 13 peeps to distribute them to I'm currently getting 4.62. What I need to do is make sure that the jobs are only issued as whole numbers. E.g 5 peeps gets 4 and 8 get 5. I also need to factor in jobs on hand etc but I have already cracked this.
I have 4 columns labelled 1st Year, Frequency, Spread and cost. then I have columns spanning upto 30 they represent years but can be labelled as 1 to 30. My challenge is that I want a formula/function/macro that depending on what I type in the first 4 columns it will populate the remaining 30 columns with either cost or 0.
Example: if I had £9,000 at a frequency of 10, starting on the 5th year with a spread of 3.
The cost represents the cost of each frequent. so in the example I would get £3,000 on each of the 5th,6th and 7th years then another £3,000 on the 15th,16th,17th years and finally another £3,000 on the 25th, 26th and 27th years.
what I want to be able to do is have one function/formula that I can paste across all of the year cells. I currently have a formula that can copy the cost at different frequencies but I cant figure the spread out.
=IF($K:$K>0,IF(OR($8:$8=$J:$J,MOD($8:$8-$J:$J,$K:$K)=0),$L:$L,0),0)
where K is frequency
8:8 is year
J is cost
what is the best way to approach this?
How could you divide all numbers in a pivot table by a certain number?
View 1 Replies View RelatedI have attached a sheet as an example, as i am trying to Divide a cell by the number of populated cells in that column e.g column (A) has a table of 16 but only has 13 populated cells in that column, the sum would be something like this =sum(A18/13. Sometimes the column will have less and at times more populated.
test sum skip blank cells.xlsx
I have a 52 (one for each week) page workbook. I am trying to average cell J9 for the entire 52 pages. However the information is not added to the cell until the end of the week so week 30-52 all have 0s and should not be counted in the dividing number. Is there a way to have Excel count the number of cells that have a number (not 0) and divide the sum of the cells but that number.
=(WK1!J9+.....WK52!J9) / (counted number of cells not = 0)
I have conditional formatting on a cell based on a formula, when I entered the solution of "if then 0 " but the cell doesn't see the result as a 0, if I manually enter the 0 the conditional format works.
I even tried putting the formula in another cell and then referencing to that cell, still didn't work...
The "divide by zero error won't trigger the conditional either......
[Code] ....
If I have a value of lets say 53, I need it broken down into equal and whole numbers across the spread sheet with the last one being the remaining value.
Currently for example in cell F5 I have a value of 41 that I need to break down so
I have done the following:
In Cell P5 =IF(F5>=25,F5-21,F5)
Then in Cell Z5 =IF(P5>=25,P5-21,P5) and this goes on until I have zero value from the original value in the last cell can i not do this all in one formula and have the results populate in other cells.
I am creating a 'weekly average spreadsheet' (Excel 2007) for a teacher. It has a column for each student's name and his test grade for each day (M-F). The last column gives his weekly average.
She also needs an average for all the students' for the week (vertically). My formula is correct, i.e., =AVERAGE(H2:H11). However, I'm getting a divide by zero error because I have some blank rows above my formula (so she can add new students' names as they come.
How can I get rid of the divide by zero error so she can see the running averages as she inputs grades (but still leaving empty rows for new names)?
I have just started to try and learn VBA for excel. the resource I have been using are books and the WEB. Some how, not sure how there was/is some code where all enteries in all worksheets are divided by 100, i.e if I enter 2222 after clicking the enter button the result in the cell is 22.22. I have deleted all macros and code however the problem still exist.
View 3 Replies View Related
If CheckBox1.Value = True Then
Range("e25") = ComboBox6.Value
ElseIf CheckBox2.Value = True Then
Range("e25") = ComboBox6.Value / 2
End If
Im getting an error on the second to last row, Ive never tried to divide using VBA before and I have no idea how to!
Also the amount im trying to divide will always be in the format hh:mm
I have a database that requires me to find the average of some data over several columns, however if one of the values I have to divide by is a zero I get a 'Can't Divide By Zero Error' is there any way to override this ? So that if a Divide by Zero Occurs, instead of returning a 'Can't Divide By Zero Error' it just replaces it with a Zero instead ?
View 6 Replies View RelatedI have minutes of meeting and have to divide them into different sheets against completed, and different departments and dept HOD responsible for it. How do I do it without "Copy/Pasting" the code? Also I have to remove the ones that are done. Any macro or something that can be written for these.
format of sheet
Sl No. | Date | Remarks | Dept | Dept Head 1 | Dept Head 2 | Status
I have to get data into different sheets against Dept, Dept Head 1, Dept Head 2 and remove the "Done" status to different sheets.
How do I do it without manual labor?
I have 10 years from 2003 to 2012 and need to divide this into 2 categories pre-cisis and post-crisis. How can I do that?
View 3 Replies View RelatedI am working on my thesis empirical part now I have 10 years from 2003 to 2012 and need to divide this into 2 categories pre-cisis and post-crisis. How can I do that?
View 10 Replies View RelatedExcel has a QUARTILE function to divide a population into quartiles. I'm trying to do something similar but divide a population into deciles (i.e., every 10%). Is there any easy way to divide a large population into deciles and to assign a decile to each value in the population (i.e., top 10%, 11-20%, 21-30%, . . . bottom 10%)?
View 2 Replies View RelatedI have a data extract that gets generated at the end of each month that I post into the 'Full Extract' tab on my example spreadsheet.
writing a macro that will divide the various items in the 'Extract' based on the Reference, (some items may need to go into multiple sheets)
then draw down the formulas that need to be applied to the item.
I'm lost on VBA, but I have been successful at recording a few extremely simple macros. I have a number of pdf statements that I have run through OCR, and the OCR often misses the decimal point so that 43.85 comes out as 4385. (this is in dollars, so everything has 2 decimals).
These cells are usually pretty easy to spot, so I want to select that cell, press a keystroke or 2, and divide the value in that cell by 100. I assumed that by selecting "relative cell references", and recording a macro with the keystrokes "<F2>/100<HOME>=" (without the quotes, of course), I would accomplish that. But instead, it places a constant in that cell, with the value obtained in the cell where I recorded the macro.
I may not even be calling it the right thing. but let me explain what i'm looking to do. i've got three columns on a spreadsheet and i need to be able to add two columns together and then divide the sum by another column. so something like this:
4+4/636 = 79.5
d2+f2 (divided by) h2 = 79.5