I want to start copying at a cell that contains the word "Vehicle" that is in the middle of a pivot table and copy until the end of the pivot table but I don't want to copy anything before it. How can I word this to in VBA?
View 1 RepliesI am trying to get to grips with the dynamic ranges for pivot tables. I have named a range data and in the refers to section put:
=OFFSET(Sheet2!A1,0,0,COUNTA(Sheet2!A:A),COUNTA(Sheet2!1:1))
I was hoping that then when i go to data > Pivot table and it asks for the range i could put =Data but it tells me that the range is invalid. I have attached a copy at the bottom.
I'm looking for a VBA that can copy a PivotTable to my workbook. The PivotTable is at another location. When I open my workbook, this VBA must replace the old PivotTable by the most recent PivotTable. How do I do this with VBA?
View 1 Replies View RelatedOn a worksheet, I created:
- a list of data
- a pivottable based on these data
When moving this worksheet this worksheet to another workbook, the pivot table can't refresh anymore. This throws an error message "Reference is not valid". To work around this problem I need to adapt the datasource. The same occurs if the list and the pivot table are on separate sheet, with the added strange behaviour that, when data an PT are split, it is not possible to move both sheet together.
This would not be a big issue if my problem had to be solved manually. The real problem is that I need to move the sheets from a C# program.
I have a pivot table summarizing a lot of weight data on the product that we make. I have the actual weight and the specification weight, and a calculated field for the % over or under weight.
What I want is also a pivot column to show the range of weights for each product code. I have added a column (calculated) giving the weight difference (in gm) but when I collapse to summarise for each product it gives the sum of the differences. I think that the best thing may be to use an array formula on the source data table in order to give the range but I have not tried that yet.
I have a data management issue that I have been able to resolve using SUMIFs and a custom table, but not in pivot form. Since the data source is a SQL database, I would prefer to resolve the issue in pivot form so that future values chart correctly. The data is formatted as so:
Job
Day Start
Day End
Size
Project
1
1/1/2014
1/10/2014
10
A
[Code] ......
From that data I want to see the total size of projects active at the start of the week for the past year. This would essentially mean summing the size of the projects if the week start date lies between the day start and end. This is what I ended up with:
Year
Month
Week
Weekday Start
Active Size
2014
1
1
1/1/14
10
[Code] .....
This is the associated pivot chart:
This would be "OK" except that I would also like to see the size breakdown by project, like this:
This is where I would need the data to be handled purely in a pivot so that when a new project is added, the pivot table will automatically make the summing column for it rather than my manual creation of columns for the data.
I have uploaded a link to a work book with the examples of the data and how I made the charts above. You can see that to make the second chart I had to manually create the columns for each project:
Download PivotExample.xlsx from Sendspace.com - send big files the easy way.
I need to copy certain values of multiple pivot tables of different worksheets into a new worksheet.
To be more clear I attached an example worksheet:
In "Sheet1_pivot table" and "Sheet2_pivot table" I have two pivot table with data divided by Area, Year, quarter and month.
In "Table" i have a summary table where, depending on the values of cell B2, B3 and B4, the summary table has different values copied from the 2 pivot tables.
I was thinking of a code like this but i have problems getting the values from the pivot tables
VB:
Sub else_if()
If Range("B2") = "North" And Range("B3") = "October" Then
ElseIf Range("B2") = "South" And Range("B3") = "October" Then
Else
.
.
.
.
Else
MsgBox ("Area not present")
End If
End Sub
In Excel 2007, is it possible to copy & paste a pivot table, and have the result look like a pivot table, but not actually be a pivot table? I want to keep the values and the formatting (the colors and borders, etc) but I want it to not actually be linked to the data or have the ability to change with dropdowns, etc. I've tried the usual copy & paste special (values) thing, and the other otions in the paste special box, but it doesn't keep the formatting.
View 10 Replies View RelatedI would like to know if it's possible to copy a pivot table from one sheet and paste it into in another sheet such that two pivot tables are not linked i.e. if I create a calculated item in pivot table it doesn't show as an item in another. If yes, how could I do that?
View 1 Replies View RelatedI have a problem in creating Pivot Table in the format that I want for the purpose of report, so I'm not even sure if I should use it at all.
In the file attached, I have a sample data source in sheet 'Source'. Basically the data are already in the list format.
For the purpose of reporting, I want to make this data in the format of sheet 'Final Format Wanted'. Note that the report only takes in data from columns D, M, N, O ( Headings highlighted in red).
(1) I understand that I can do something like this with a Pivot Table, and I already did something like it in the sheet 'Pivot'.
The Pivot table works well for Total Exposure (data from column M)The thing is, I want just the Grand Total Figures for column N and O instead of putting it in the data section itself. For better explanation, please take a look at sheet 'Final Format Wanted'. I just want the grand total for these 2 columns because they are less important and I want to be able to squeeze just the relevant figures for the report. Can I do this?
(2) Another way I have thought of is actually using a combination of Vlookup and concatenate function (look at sheet 'vlookup'). The thing is, some names that I used to concatenate might appear twice (look at row 39 and 40 in sheet 'Source' under column L), so if I am to use this, I'll need to find Sub-total first then copy and paste each item again into the format I wanted.
To me, this seems to be a really long way of doing it. Pivot Table is preferable in that it can count the total automatically for me, but I can't get the format I want.
Does anyone have any suggestion what I can do? If I use
(1)Pivot table - how can I get just the Grand Total of the other 2 columns?
(2)Vlookup - Is there a faster way in getting the subtotal and ultimately get the data in the format I want?
I have a pivot table that I need to copy only certain regions from the Report Filter on a frequent basis. For example, in the Report Filter, I have 18 total regions, but I only need to submit a pivot table for only 6 regions on a weekly basis. Currently, I'm filtering the 6 regions individually from the "data dump" and making 6 pivot tables as separate workbooks...and then emailing them out. I need to make the underlying detail available for each location that is getting their "report". I have the code for emailing a single worksheet from a workbook so, at least, I have that little tidbit taken care of.
View 2 Replies View RelatedI was using the following code for finding the max value in a range from a Pivot Table but cannot manage to make it work...
[Code] ..........
I've a macro that generates a pivot table from another excel workbook, however i need the range to be dynamic as the excel workbook im generating the pivot table from changes in number of rows on a weekly basis. Here is the existing coding:
Code:
Sheets("QA").Select
ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _
"QA!R1C1:R22580C12", Version:=xlPivotTableVersion10). _
CreatePivotTable TableDestination:="Pivot!R3C1", TableName:="PivotTable2" _
, DefaultVersion:=xlPivotTableVersion10
how to make the SourceData dynamic
I have a sheet in my workbook called Results. This sheet contains a list of a fixed set of columns (A - N) but with a variable number of rows.
I am trying to create a macro to create a pivot table from this data, which automatically selects all the rows in the Results sheet to form the data set.
I've had a look at some of the other threads on this topic, but just can't get this working.
I have the following code that I have pieced together from other threads - you will see I am trying to set "PivotRange" as the data set and include this as the data source in the pivot. I get a subcript out of range error when I run this.
Dim PivotRange As Range
PivotRange = Range(Worksheets(Results).Cells(1, 1), Cells(lastRow, lastColumn))
Sheets.Add
[Code].....
Because my pivot table is used by several users the data source changes often. In response, I created and applied a dynamic range using the offset formula. While the pivot talbe grabs the correct # of records, it inserts a blank column and row. There are NOT any blank cells in the data source range, as reflected by pivot table counts for the Blank column and Row. Any idea why Blank is showing up in my pivot table and how I can correct while maintaining the dynamic range?
View 9 Replies View RelatedIm trying for the first time to use a dynamic range as the 'source' for a pivot table. The pivot table and the source data are in two different tabs. The source data is on tab Log! and i have used Daves formula (i hope correctly) to define the dynamic range. The range starts at Column B and is 22 columns wide:
Refers to:=OFFSET(Log!$B$1,0,0,MATCH(""*"",Log!$B:$B,-1),22)
I have named this dynamic range DMR. I have a pivot table on another tab. When i try to use DMR as the source (Log!DMR), it gives me an error "Reference is Not Valid". I must have the syntax wrong somewhere.
When I filter my pivot table and I click on the button. The Filtered pivot table will automatically be copied to another sheet.
View 4 Replies View RelatedI've tried my best to describe my dilema. I import data in an SQL query from a mainframe. This data shows a job number, site address, job number and a length. Multiple lengths on the same site appear as separate entries. I use a pivot table to calculate a total length and also formulas to determine whether a site is in an East or West area. I then need to then be able to copy the 'East' jobs to an 'East' worksheet and the 'West' jobs to the 'West' worksheet. But, I only want a site to appear once with the total length.
View 2 Replies View Relatedmy macro pulls download in on sheet1. On sheet2 it makes a pivottable of it with horizontally displayed the suppliers and vertically the codes of products. This is of course dynamic (one month it may contain 10 suppliers + 8 products, other month 15 suppliers + 20 products). On sheet3 is the (static) lay-out of all suppliers and all products. Now, what I want is that all fields <> empty (or zero) from the pivot table are to be copied and placed in sheet3, the 'report' I have to fill in. index and match won't do the job I think.
View 2 Replies View RelatedI prepared a Pivot Table and then i add some data in it but now all data is not showed by Pivot Table.
I do all necessary things like refresh and all but unable to increase a range.
How to increase range for Pivot Table in 2007.
I wonder if someone can tell me if it is possible to sort rows in a pivot table based on a range in the same workbook.
I have the pivot table set up as I need it but the values in the row change each time the macro is run (it is run when new data is added)
As part of the macro a list of Grades is imported into the Workbook. These grades are always imported in the correct order. As such I would like the pivot table to follow the order of imported grade list. The grades in the list will always be the same as the list in the pivot table.
Is this something that would be possible to do?
I have created Pivot Table in "Sheet2" and the source data is in "Report" tab. The source data is in the range of A1:K200 -means until the last cell of the excel. Now if the data is more then this we need to change the source data every time before we refresh the pivot table - Is there any macro or any way so the range can be change automatically ?
View 9 Replies View RelatedI am trying to create a Pivot Table that filters on a range of data.
I have a sheet with lots of data on it, and separate sheet where I have created my Pivot Table and my list I wish to use as the filter values.
I need to extract 630 specific Departments out of thousands and report the movements against those depts. The 630 will change as time goes on and I want to just have a range where I can update the values as and when changes occur. I initially tried using Filter on Department but realized this was going to be a very long winded process.
i have a workbook containing two sheets "Impiorted Data" which is the data which is downloaded and the range will change each time the data is imported and "Pivot Table"
I would like a macro to increase the range of the data from col A to the lasst row in Col K so that the pivot Table has the correct range
I have recorded a macro , but would like this to be streamliined with regard to the range
ActiveSheet.PivotTables("PivotTable3").ChangePivotCache ActiveWorkbook. _
PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _
"C:My Documents[Debtors.xlsm]Imported Data!R1C1:R2797C11", _
Version:=xlPivotTableVersion14)
I have existing Pivot Tables that have a data source on another sheet that varies in size.
How can I have the pivot tables' data ranges reset to match the number of columns and rows on the data sheet?
I have created a system where users input data from a report into a spreadsheet, and after input it is sent off to various other workbooks depending on what was entered. I.e. The user is inputting test data on a location in a region. The regions make up the workbooks, and each location is a worksheet (While I can think of better ways to organise the data changing this is not an option here).
When the macro encounters a location in a region that hasn't been entered before it adds a new sheet based off the name of the location in the region's workbook, and creates a new named range for that sheet.
I'm running a pivot table in the central workbook, and I want to add the new named range to the page field when I create a new sheet. This is what I don't know how to do. EDIT: To clarify, the page field is choosing between which worksheet(via named range) is being shown currently.
I'm using a code to search some information in a pivot table and copy the value in the cells with offset(0,1) and is very very slow, I tryed another method with the using of Find but isn't working: error message: missing object in the with cycle.
Here is the working code:
Dim DataFine, DataInizio, UltimaRiga, Gg As Date
Dim NomeMacchina, Plant As String
Dim Cl As Object
Dim Pr As String
Application.ScreenUpdating = False
[Code] .......
Here is the code who doesn't work
For i = 6 To 500
Giorno = Sheets("OEE03").Cells(i, 2)
With Sheets("01")
Pr = Range("A5:A500").Find(Giorno).Offset(0, 1).Value
Sheets("OEE03").Cells(i, 9).Value = Pr
End With
Next
if I use this code on a normal sheet it works but when I try to use it on a Pivot table fields give me always the error message.
I have created a pivot table in a workbook which relates to data from 2011 - 2012 and this works perfectly. What I now need to do is to copy the pivot table (without the data source) to a new workbook for data which will be collected from 2012 - 2013. Unfortunately when I copy it and try and find the new data source it does not update the filters according to the data in the new workbook.
View 5 Replies View RelatedI'm trying to write a macro that will create a pivot table, and am getting an Error code 1004: Cannot Open Pivot Table Source File "Sheetname". My code is below. I've tried to note what each section does, and it all seems to work well except for the Pivot Table creation.
View 14 Replies View RelatedI have a worksheet with two pivot tables, one of which is visible to the user. Ideally, the user should be able to change the "Row Label" field settings of the visible pivot table and then press an "update button" that then adds the same field to the second pivot table.
Ideally, the ordering of the fields should also be made similar between the two tables, though this is of less priority.
I imagine it would be something in the style of:
"If number of Pivot1 active row label fields = X then
Pivot 2.AddRowLabelField = Pivot1.RowLabelField(X)
end if"