complete this coding?
Sub DeleteBlankRowInColumnA()
'this macro scrolls down Column A if the cell is empty the row is deleted.
Dim A As Integer
A = 0
Do Until A = 142
If Range(0, "a1") = 0 Then
Selection.Delete shift:=xlUp
End If
Loop
End Sub
Is it posibile to make a macro that automaticaly delete rows based ona a condition. Condition is to delete rows that have B column value "" or zero. For example:....
View 12 Replies View RelatedI have an Excel spreadsheet that is given to me weekly, but I'd like to remove repetitive and empty rows before presenting it to someone. It is set up like this:
Row 1, A1, contains the word Project.
Row 2 is blank
Row 3 is blank
Row 4 is blank
Row 5, A5, contains the word Organization.
Row 6 is blank
Row 7, A7, contains a 6-digit number starting with 3.
Row 8 is blank
(all of the above starts over again (loops) approximately 30 times)
The final row contains the phrase "Grand Total"
*Row 5 is repetitive and is not required. I'd like to delete it.
I have too many empty columns. Getting rid of them (and Row 5) would greatly shorten my spreadsheet.
I am aiming for:
Project
301111
Project
301112
Project
301110
(Repeat until finished)
Grand Total:
I have a worksheet with part numbers, and I want to delete all the rows with part numbers matching a part number in another workbook (I could import the list into the part number workbook in a new sheet if it makes it easier). The part numbers in the other worksheet would be in column A.
View 5 Replies View RelatedI would like to Use my Excel VBA program to search each row in a csv document for a name (located in a cell ) if the name exists then I would like to delete the entire row.
Whenever I try to do the above in excel, even when I save in csv format the file formating or something gets changed and the file which has to be procesed through another program then process incorectly.
Is there a way to do what I need while retaining the formating which must obviously be changed when the file is opened in excel?
Having book1 and book2 (that is closed). Is there a way that if I erase a value "X" in book 1, update book2 (without open it) deleting the complete row/rows where the value X is found?
View 4 Replies View RelatedI have an imported report in a spreadsheet. It imports to three columns. I need to check each row in column A for three seperate criteria and delete the rows I don't need. I need to delete blank rows and check next row for page header info. Delete these and next rows to next blank cell. Check next row for page header and not delete if not page header. Several rows down will be a cell with 23 blank spaces before the word Reg: and sometimes other words past this but always this first. This row is to be kept. I looked at the FAQ's example of Deleting but I don't think it will work. I also need to put a key word in column A at a point where I want to stop. This report is a couple thousand rows long so a VBA procedure would really save time. I have a procedure I use to check for two zero's in two cells that hide these rows but I couldn't modify it to work on this report.
View 9 Replies View RelatedI'm working this spreadsheet and i want to automate of deleting the entire rows once the last two columns contains both Zero values. the worksheet cotains thousands of row to clean-up.
View 3 Replies View RelatedI want a macro to delete the entire row based on the value in Column Q ....
View 14 Replies View RelatedWhat I need is a macro to delete a row or rows for a specific range of cells (eg. E20 to E58) when the cells in that range column E is = blank. The cells in column E is formated with a currency sign $. Deleting the row should shift up all rows below. I need to run this macro manually. Excel 2002 SP3.
View 9 Replies View RelatedI want to create a macro the will delete all the rows in a sheet if 1 of 2 conditions are met. The first condition is if a cell is blank or if a cell contains the word "negative"
View 9 Replies View Relatedhow to delete duplicate rows except the first and the last rows using macro..
I have data like this and i want to delete those rows except the first and the last rows
31/10/2006
31/10/2006
31/10/2006
31/10/2006
I use the below macros from btadams posted 27th January 2003 but only for delete the last row
Sub DleteDups()
Dim Cell As Range
Do While ActiveCell.Offset(1, 0) <> ""
If ActiveCell.Value <> ActiveCell.Offset(1, 0).Value Then
ActiveCell.Offset(1, 0).Select
Else
ActiveCell.EntireRow.Delete
End If
Loop
End Sub
I want to delete a row in excel based on a condition.
The condition is as follows:
I have few rows in the excel where the columns 7,12,13,23 are same and column 24 in one row has some number and in some other row the column 24 is blank with orange color filled(the colorindex for orange is 44).
In this case I want the row with orange color filled in column 24 to be deleted.
i have an issue i need to delete entire row if a condition is met, i need syntax if possible to delete if a cell word "begins with" a certain letter ...in this case...letter A
column is "O"
must search threw entire row
Here is the problem: i have two conditions to satisfy first is data from column A and second is data from column C, what i wanted to do is if both data from column A and B has the same other data in column A and C then sum the total in column D, F, I retain data for column B, E, G and H. Then delete the duplicate rows. By the way we also need to replace the remove the text (W1,W2,W3,W4 and W5) in column C.
View 6 Replies View RelatedHow do I have the marco delete rows if the O column = a certain cell.
For instance my O column has a bunch of colors
Cell N1 list one color (red) and I want the macro to delete the rows that contain the color from N1 in column "O".
I have a spreadsheet with 3023 rows and columns A-L. Here's a small sampling of Column A (with heading "sku" included, copied exactly as it appears in the spreadsheet):
A
sku
3102-0400-100000
3102-0400-200000
3102-0500-100000
3102-0500-200000
3102-0600-100000
3102-0600-200000
3102-0700-100000
3102-0700-200000
I need to delete every row in which column A includes the text "200000".
Although the above sampling shows "200000" appears in every other row, that is not the case in all 3023 rows.
I have table in which against the Column A data values are added in Column B, C and D.
If Column B,C and D cell values is 0, then I want entire row including A to be deleted. How can I do this in VBA?
Note: Column A data begins from Row 15 and below.
Just to avoid confusion. I want row deletion, only when all the three cell on B,C and D is = 0
I have a problem deleting rows based on a condition, i didn't know how to use offset method.
i'm using a table like this one :
A B C
1 Main design1 FFR0
2 Extra design2 FFR0
3 Main design3 FFR0
4 Extra design4 FFR0
.
.
n Main designn FFR0
I want to delete entire row if "FFR0" in column C exists in a row beginning by "EXTRA" (column A)
I want to be able to delete certain rows based on multiple criteria. If data in the row does not meat the crieteira, it shud be deleted. I have attached the excel file sample in which I want to keep the highlighed rows and detele the rest. Its base on Origin city and Destination city combination. Eg: If Origin city="A" and Destination City = "B", I want to keep the row. Like wise for all highlighted rows. but if the Origin City = "B" and Destination City = "U" I want to delete the row.
View 9 Replies View Relatedi have a set of data as below and wish to delete ENTIRE ROW if cell is the same but keep the first entry when code comes to it..ie in the data set below excel would keep first row and delete 2nd,3rd,5th, 6,7,8 and then go to next unique identifier which would be AU0000LIFHB3 this would not be deleted as it is unique the would proceed to AU300GPTC011. this process would then stop when no data was available
AU300AUS1019
AU300AUS1019
AU300AUS1019
AU0000LIFHB3
AU300AUS1019
AU300AUS1019
AU300AUS1019
AU300AUS1019
AU300AUS1050
AU300GPTC011
AU300GPTC011
AU300GPTC011
AU300GPTC011
AU300INTE018
AU0000LIFHB3
0
AU300SUNQ027
My worksheet has a report name in cell A1, a brand name in B2, price name in C2, and color in D2. Row 3 has a table header in cell range A3:E3 followed by rows of table contents at the end of which is a row of empty cells. This sequence repeats itself for a new product: a row with the report name in column A, followed by a row with a new brand name, price and color in the same columns as before followed by the same table header and table contents. The number of products (with the previously mentioned details and table) vary so I would like to write a macro that is not dependent on a set number of products. Each table varies in the number of rows but never contains empty cells and always ends with a row of empty cells. I want to delete all rows with the report name and have all products in one table with the brand, price and color added to the table header and contents.
View 2 Replies View RelatedI am sure this is a very simple questions. I am using the below code to work on the worksheets on a workbook called "MF BANK EXPOSURE SUMMARY.xls" so far the code that I am using is:
Sub Commandbutton2()
Dim iCol As Long
Dim Isheet As Long
Dim Item As Worksheet
Set MFBANK = Workbooks("MF BANK EXPOSURE SUMMARY.xls")
For Each Item In MFBANK.Worksheets
With Item. Range("A1:T65536")
For iCol = .Column + .Columns.Count - 1 To 1 Step -1
If IsEmpty(.Cells(65536, iCol)) And IsEmpty(.Cells(1, iCol)) Then
If .Cells(65536, iCol).End(xlUp).Row = 1 Then .Columns(iCol).Delete
End If
Next iCol
End With
Next Item
End Sub
I would like to extend the code so that it works on the worksheets of two workbooks at the same time the one being the "MF BANK EXPOSURE SUMMARY.xls" and the other being "MF CP EXPOSURE SUMMARY.xls" .
I have a data dump. I download everyday with 200 rows and 20 columns. I need to remove any rows where there is no value in either columns C or D. Is there a quick way to do this?
View 7 Replies View RelatedI have a cell with today's date on it. i.e., cell A1 = today()
Then, I have rows of data with one of the columns with a date on it. I've put in an object (button), where when the user presses this button, I want all the rows of data that do not have the date on cell A1 to be hidden.
Then on the second button, when the user presses the button, to unhide all the rows that were previously hidden. To make it easier, I can simply state it to unhide all the previously hidden rows (but NOT columns - there are still hidden columns which I want it to stay hidden).
So in sum, using table below. If I have on cell A1 - today's date is 2 Mar 2013, pressing first button would hide the row with Jane Y's record. Then pressing second button would then unhide all previously hidden rows.
DATE
NAME
DEPT
1 Mar 2013
John X
Accounting
2 Mar 2013
Jane Y
Operations
3 Mar 2013
Joe Z
Marketing
How can I accomplish this?
I have tried to write some VBA to copy and paste rows based on the condition in cells A:A in sheet one. So far I have managed to put something together which will paste the first row and insert a new row below but keeps on pasting the same row. But not much else! Not sure I have tried to make it more difficult than what is it.
I would like it to copy a row based on a certain condition ("WRW") in A:A sheet one and paste it to sheet2.
VB:
Function DoOne(RowIndex As Integer) As Boolean
Dim Key
Dim Target
[Code].....
I have a worksheet which is created monthly by one of our company's employees which reports results for that months operations and successful audits. These audits are separated into various service lines and on the report which is submitted it takes on the following format:
1|Service Line|Data A|Data B|Etc.
2|___CR_______| Data | Data | Etc.
3|____________| Data | Data | Etc.
4|____________| Data | Data | Etc.
5|____________| Data | Data | Etc.
6|___DD_______| Data | Data | Etc.
7|____________| Data | Data | Etc.
8|___MS_______| Data | Data | Etc.
9|____________| Data | Data | Etc.
What I want to do is use a macro from another sheet that has the effect of: While ServiceLine = "CR" copy the row of that line and move it to my monthly summary workbook, sheet 1. Then when the Service line changes to DD have the macro copy that information to the monthly summary workbook sheet 2, and so on. The problem is, if I test the Service Line column each time it will be an empty string the majority of the time and I'm not sure how to combat that with my If, Do, For, and While statements. As I've thought about it there are two solutions that I can think of: someone knows of a way to test the row only if it has information in it, or if there is a way that I can copy the service line information down until the change in service line so I can test Service Line on each Row.
I have created a worksheet which contains seven columns of data and many rows. I need to copy entire rows into nine separate worksheets depending on the data in column G.
I know nothing about VBA but have read enough to realize this is the way to go with this. Would someone point me in the right direction on how to set this up? I've attached the file so you can better see what I'm talking about.
I have a worksheet that I want to export to a csv file. However, there are multiple rows that I want excluded in the export. These lines are recognized by the word "No" in column E. Is this possible?
View 3 Replies View RelatedAttached is a portion of the file I will be working with, just to illustrate what I would like to do.
I have a macro that copies and pastes data - it uses these Tasks as templates. The macro copies these rows for each task that is required under the headings (Task #1 - Task#?). What I would like is to hide the rows under Station Maintenance Task #0 and it's 6 rows that are associated with it, as well as Task #0 under CMS and the 12 rows associated with it. In order for the macro I already have work properly is that these would be unhidden for the macro to run and then re-hidden afterward.
I searched on the forum for this topic, and found hide/unhide where you would put in the beginning row and ending row - however since there will be numberous rows added in, this type of defining rows would not work.