VLOOKUP-result #N/A
Jul 5, 2009
I have a problem:
Cell A1 has this formula: =MID(B11;8;3)
with this value: 428
Cell A2 has a lookup-formula =VLOOKUP(A1;Tabell;2)
Result is #N/A
Why??
If I overwright the formula in A1 (the MID-formula) with 428 I get the result I expect.
View 3 Replies
ADVERTISEMENT
Jun 10, 2014
When I drag my VLOOKUP formula down a column in Excel 2010, the return value copies the formula result from the original VLOOKUP formula result. For example, if the first VLOOKUP returns a value of 0.5, I expect to see 0.5 or 1 in the cell below that one. However, I get 0.5 which is not the expected result for the cell below.
When, I click the fx on the cells below, the expected return values appear in the formula result. After I click OK, the expected formula results updates and now appears in the cell.
I'm not sure what is causing this issue. My computer was updated recently from an old machine to a new one. I have never experienced this issue before.
View 3 Replies
View Related
Feb 21, 2007
using the VLOOKUP when it doesnt have the values it needs it returns #N/A however what i need it to return is 0 or possibly just a blank cell.... can this be done without the need for code?
View 2 Replies
View Related
Dec 9, 2013
Been working on this problem for a while, I need to have a vlookup (or other function) return locations based off of a concatenate (for unique identifiers). Only issue is that the concatenate formula creates doubles which returns the same location for each vlookup. I have attached an example file.
View 2 Replies
View Related
Apr 27, 2009
This is the scenario----------------------------
Column A in sheet1
1101
1201
1301
1401
1501
1601
Column A Column B In sheet2
1101 | 14211
1101 | 14541
1101 | 14857....................
View 5 Replies
View Related
Mar 18, 2009
Below is the data I have.
Say I need to get values from Column C. VLOOKUP'ed values return the first value, but i need it to move on to the next result if the first one = 0.
so I will get
123 - not 0, but 0.22
234 - 0.1
345 - 0.....
View 9 Replies
View Related
Apr 21, 2006
If ur using VLookup, can u tell it to skip the first result and find the second result and return it?
View 5 Replies
View Related
Jun 20, 2014
[Code] ......
Trying to get columns 10, 11 & 13 to join so it says "Mr Noddy Bigshoes" (Salutation, Forename & Surname).
View 7 Replies
View Related
Mar 12, 2014
I have a formula that I'm trying to utilize VLookup to determine a specific bonus. The issue I'm having is when looking for the closes match, it is returning the value below where it should because it's rounding down. For example, the string I have reads:
=VLOOKUP(S5,'Rep Daily'!A1:B61,2,TRUE)
The value it's defining is 17.7485, so it's returning the bonus for 17.5 instead of 17.75. Even when I use the =Roundup function, it's showing 17.75 in the cell but the actual value of the cell is 17.7485 so VLookup is returning the lower of the two values.
View 7 Replies
View Related
Sep 24, 2009
I have put a VLOOKUP in place for a range of cells. Where the referenced cell has no entry it puts #N/A in the sheet. This is causing me further problems, is there a way to get all entries which equal this to leave the cell blank?
View 8 Replies
View Related
Dec 8, 2009
Hopefully you will be able to help again. Is it possible to do a vlookup that references data on other tabs within the worksheet so that the result of the formula is in the cell not the formula.
So if my vlookup was =vlookup(a2,$a$1:$b$12,3,0) and the result was john smith i want just john smith in the cell. I know about copy and paste values but i was looking for a more automatic way. One that doesn't need intervention.
View 12 Replies
View Related
Aug 12, 2009
how to return a blank or null value when the vlookup formula would normally return a #N/A? I am using the False range_lookup argument to get an exact match.
View 2 Replies
View Related
Jan 31, 2014
Code: =VLOOKUP((LEFT(C4,6)),'Data from 7500'!$B$16:$G$195,6,TRUE)
And it works great, except that the data returned is off by one row. For example, the correct value for the sample name in B107 is located in G107, but the formula returns the value in cell G106. I've tried changing the TRUE to FALSE and that returns #N/A.
View 5 Replies
View Related
Dec 25, 2007
I have used in Index & Match formula in column G as follows :
=IF(ISNA(INDEX(R:R,MATCH(E13,S:S,0))),"",(INDEX(R:R,MATCH(E13,S:S,0))))
The codes in columns R & S are as follows:
******** ******************** ************************************************************************>Microsoft Excel - M_NECPE.Man Accts.xls___Running: 12.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutR1=RSTU1New CodesOld Codes 2 310100199999V 4101002NEW 51010032270A 61010061100 7101009NEW 81010101104 91010111101P 101010121101S 111010141102 121010151102L 131010181130 141010222203 151010231106I Sheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
The code in column E & G is as follows:
******** ******************** ************************************************************************>Microsoft Excel - M_NECPE.Man Accts.xls___Running: 12.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutG62H62G63H63G64H64G65H65G66H66G67H67G68H68G69H69G70H70G71H71G72H72G73H73G74H74=EFGH621106B| 631100|101006 641101D| 651101K| 661101P|101011 671101S|101012 681102|101014 691105R| 701103|101037 711104|101010 721105| 731106|101031 741106I|101023 Sheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I have used a lookup table to calculate the value in column H as follows, but cannot get it to work
=IF(ISERR(VLOOKUP($E62,$M$3:$O$850,3))=1," ",VLOOKUP($E62,$M$3:$O$850,3))
View 9 Replies
View Related
May 5, 2004
My VLOOKUP formula is displaying in the cell instead of the result. The formula is VLOOKUP(A1, income_codes, 2, FALSE) and in the formula editor the result (00017) is calculated correctly.
However the cell displays =VLOOKUP(A1, income_codes, 2, FALSE) instead of the answer 00017.
My view options are not set to display formulas. The codes are formatted as text in the range income_codes as they start with zeros.
View 9 Replies
View Related
May 30, 2006
After using a vlookup to find a value in a cell I want it to return the cell belows information.
View 2 Replies
View Related
Jan 25, 2007
Round Result Used As Vlookup Lookup_value Does Work For 6% in attached spreadsheet. I am an experienced user of Excel and have never come across something I could not solve before but this has stumped me. The issue is now sorted using different formulas but I do not know why the attached has #N/A errors in the Yellow highlighted cells.
View 4 Replies
View Related
Jan 25, 2008
I have a formula that calculates a revenue per day by taking total revenue devided by total days, from that I have another cell doing a VLOOKUP on that to find what tier that value falls under almost like a grade book, however I need the division to be rounded up if greater than x.xx5 because when I do the VLOOKUP sometimes it drops the product to the lower tier when I needed it rounded up. example:
=IF(ISERROR(Data!H6/Data!E6),"",(Data!H6/Data!E6))
if the value of those were to actually equal 1.256 I want to be able to have the VLOOKUP return the tier for 1.26 not 1.25
View 7 Replies
View Related
Jan 31, 2014
I have a vlookup worksheet like described in this thread: [URL] .... This works perfect. I would like to be able to jump to the vlookup result using a hyperlink.
In the thread worksheet the formula in C2 is like
=VLOOKUP(A2,INDIRECT("'"&INDEX($G$2:$G$9,MATCH(TRUE,COUNTIF(INDIRECT("'"&$G$2:$G$9&"'!C2:C100"),A2)>0;0))&"'!C2:D100"),2,0)
In cell D2 I placed the formula (font: webdings )
=IF(C2="","",HYPERLINK("[Workbook1.xls]"&("Sheet2!"&(ADDRESS(MATCH(C2,Sheet2!$D:$D,),4))),"i"))
(Due to the Dutch Excel I use I replaced ";" to ",")
The link works because I hardcoded "Sheet2" into the formula where the result can be found. But it would be much nicer if I didn't had to put the sheetname into this formula.
Is it possible to use range G2:G8 like in the first formula to achieve this? I guess you have to use INDEX and/or INDIRECT but I barely understand the first formula ...
View 1 Replies
View Related
Dec 12, 2012
In workbook 1, I have summary sheet with columns
A -> SNO
B -> Customer Name
C -> Product Name
D -> MODEL
E -> Quotation Rate
I have to retrieve MODEL & Quotation Rate .
and also having seperate sheet for each customers say X1 , Y1 , Z1 ( so other sheet names as X1, Y1 & Z1)
In X1 sheet , I do have following columns
A-> Product Name ,
b-> Model (as of now limited to 1 per product name)
c -> Rate
Now my request is as follows Based on the Column b value in Summary sheet - i have to goto respective sheet and do vlookup for the respective product name and retrieve model and fill it in Column D. I heard i can use INDIRECT function and Vlookup in this junction .
View 5 Replies
View Related
Jun 12, 2014
I am trying to use a VLOOKUP on a table of manufacturing die cuts of certain sizes.
A formula tells me a number close to the die that is available. The rule is to use the next larger size die cut for the job.
An example of die sizes are:
Die Sizes
108.0
112.7
114.3
117.5
My formula gives me 114.22, therefore, I should use the 114.3 die.
However, the VLOOKUP says 112.7, not the answer I want.
How can I adjust this VLOOKUP to give me the next size down? I am guessing a IF, but I am not the best at writing IF statements.
View 4 Replies
View Related
Mar 18, 2007
I have a three or four letter abbreviation of a last name in A1. Column C contains a list of Last Names; column D contains a list of corresponding First Names; and column E contains a formula concantenating the First Names and Last Names from columns C & D.
I have the following formula in B1:
=VLOOKUP(A1,C1:E44,3,1)
I am attempting to match up the three or four letter abbreviation with the concatenated list to return the full name (First and Last) in cell B1, however, I'm not getting the desire result. I keep getting the name in the row just above the name I want.
View 9 Replies
View Related
Jun 25, 2008
I'm using this formula (thanks to dafan & HalfAce [url]
=IF(VLOOKUP($A177,$A$736:$C$787,3,FALSE)=0,"",VLOOKUP($A177,$A$736:$I$787,3,FALSE))
to return the value located in the 3rd column of the range when the value in the 1st column of the range matches the data in A177.
However, there isn't a match for the data in A178 in the range, so the formula returns "#N/A". I would like the cell containing the formula to remain blank in those instances.
View 9 Replies
View Related
Mar 5, 2010
I am trying to make a drop down list based on the result of a vlookup.
What i want to do is look into a table that has country name, depot station, but i have more than one depot per country so when i look up with vlookup i only get one result back, the table looks like this.
Country Country nameDepot code Depot name 1 GBUnited Kingdom STN Stansted 2 GBUnited Kingdom EDI Edinburgh 3 GB United Kingdom EMA East midlands 4 FR France
GNO Garanoa 5 FR France MRS Marseille
How can i look up GB or United Kingdom and get all the depots listed from that country.
View 9 Replies
View Related
Jul 16, 2014
I have a sheet that a VLOOKUP is looking at, and what I need is, if that VLOOKUP finds what it is looking for I need it to look at the cell 2 cells to the left, how is that done?
I am thinking something like:
Formula:
[Code] ......
I just don't know the offset part.
View 3 Replies
View Related
Jun 21, 2013
I am using VLOOKUP to find the size of a cam to be installed in a tablet press, based on the product code it will be running.
The array has two columns: (W) Product Code, (X) Cam Size.
Array: W4:X437
The user selects the Product Code from a drop-down list in cell E5.
The resulting Cam Size is displayed in cell E7. The VLOOKUP works fine.
=IFERROR(VLOOKUP(E5,W4:X437,2,FALSE),"")
Occasionally, the cam size has to be updated. The user would then select a new cam size from a drop-down list in cell E9.
I have a "Update Cam Size" command button.
What I need to happen is for the value in E9 to replace the value in the array that is displayed in E7. Obviously, I have to know the location of the cell in the array, but I can't figure that part out. I've tried ADDRESS and MATCH functions, but it comes back with "#N/A" Value not available error.
=ADDRESS(MATCH(E7,W4:X437,0),2)
View 3 Replies
View Related
Feb 26, 2014
what I would like to do is view a cell result in my userform with out deleting my formula
It works perfect from the excel side but I just cant get it right from the user form side
Ok so cell D6 contains a vlookup formula. I want the vlookup result to appear in my userform. I can get this to work but it overrides the vlookup formula with the result. This means that when I go to use it again it just shows the same result.This is what I have:
Cell D8 has a Combobox with a list of names to select from
this is the formula in cell D6 =VLOOKUP(D8,B107:I754,2,FALSE) This retrieves the selected customers account number from the combobox. I need my userform to display the account number with out erasing the formulas because I will need to search for more account numbers after.
I have named the textbox in my userform Customeraccountb
View 3 Replies
View Related
Mar 3, 2014
The below piece of code carries out a vlookup on a defined cells value and produces a result in sheet one, however if the column index number in sheet 2 (Database) is empty the result 00/01/1900 is produced.
I'm not sure how to say leave the result blank if the column index number is blank.
Excel 2010
Userform = Tab 1
Database = Tab 2
View 6 Replies
View Related
Jul 15, 2012
What i have so far is:
-3 Sheets (Sheet1 - Search, Sheet2 - Data, Sheet3 - Result)
-Sheet1 has a userform ready to link up - this opens up when workbook and worksheet is activated.
-Sheet2 has some example data to search - the search is for column 1 (see attachment)
-Sheet3 has a template ready for the data to be pasted to.
I would like the search result is column 1 to copy the data from columns 1 to 7 to sheet3.
I want the template/layout to remain after the pasting of results. (everything protected from editing, if possible).
Once finished (ie go back to sheet1, i want the data from sheet3 to be cleared.)
View 9 Replies
View Related
Feb 6, 2013
I need the Service Order tab to populate with data from the CPR tab based on the IO#. Since there is more than 1 occurrence of an IO# I need a formula to list the 1st, 2nd, 3rd, etc result of the vlookup in the cell under the 1st.
=VLOOKUP($E$2,CPR!$L$4:$AA$12,2,FALSE),
When I drag this down I get the 1st occurrence of the IO# 777 I need all of them.
B C D
Atex ID#(unique id) Campaign name Site
Row 7 1st occurrence of IO# 777
Row 8 2nd occurrence of IO# 777
Row 9 3rd occurrence of IO# 777
View 2 Replies
View Related