I would like to do a VLOOKUP (or similar operation) to grab information from a column based on a column name instead of column number.
For example, instead of:
=vlookup(a2,t5:z10,4,FALSE)
I would like the formula to read:
=vlookup(a2,t5:t10,"COLUMN_NAME",FALSE)
Is there a way to put a formula within a Vlookup formula that will act as the column number? For example I have this simple Vlookup formula: VLOOKUP($B4,'TAB'!$A:$N,8) and 8 references the year 2014. Well if I update the numbers on the separate tab and the year 2014 changes to a different column, I want the formula to automatically change to that.
View 3 Replies View RelatedI have the following formula. How can I change it so thst when copy/drag the column number automatically increments by 1
IF(ISNA(VLOOKUP($A2,'Purchase Order Pivot Table'!$5:$500,67,FALSE)),0,VLOOKUP($A2,'Purchase Order Pivot Table'!$5:$500,67,FALSE))
I WANT it to search all of column A for the highest number in the range (which will change daily to a new high number above the highest currently), and return the value in column 4 (column D) that corresponds to that value from column A. This is what I have, but it is not working, it is giving me the number (1) in Cell A800 (which is the lowest valued number in my range. The numbers range in value from 1 to 762 with none repeating (they are sequential). The formula I have is :
=+VLOOKUP(MAX(A76:A2000),A76:I2000,4)
ColumnA Column B ColumnC (Yes/No)
2121 345766
23423 6456546
4234 6456456
7567 64566456
76756 654645
67567 3344534
76575 34534534
756756 45345
7657 534545
756767 4534534
756756 435345
Hello,
What I am trying to do is
Search the number written at ColumnB in ColumnA and if found write YES to column C
if not write No
I want to get value from reference one column and return value by corresponding row from another column. This can be done by vlookup column. But it find value from 1st column and return value from given relative column. That mean find from Left column and return value from right side given column number.
But I want find from Given column number and return value from given left column. For Further detail see the Attached file.
=IF(ISNUMBER(VLOOKUP($E8,Su!$D:$K,7,FALSE)),VLOOKUP($E8,Su!$D:$K,7,FALSE),)*$I8
In the first vlookup it picks up a value. I need to do the same vlookup function but it should also pick up another value in column 9 and should add value in column 7 and 9 and return it. Employee id numbers are in column E in the first page.My formula checks for the employee id in Su sheet and retrieves the value from the seventh column. I need to retrieve also from 9 th column and add them together.
I want to look up a value in the third column of a table and return the value in the first column of that row on the same table. What do I do?
View 2 Replies View RelatedI have a table as below (you can also refer to the attachment) and need to do the vlookup with EE Code if the left 2 characters of "EE Code" = 91 to 95.
EE Codedeptif left 2 characters of EE code= 91 to 95, vlookup dept code
921600012345678
vlookup arraryA12345623456700
39914123 test785637039914123
38214125 test915580057889056
40964197 test932660038214125
77014155 test913580039914123
345699940964197
945800077014155
953790300123432
915800012345678
045699957889056
585637039914123
use the VLOOKUP function when the column I need to search is not column A?
I have a Workbook with two worksheets in it and in Sheet 1 I have 10 columns of various text and numbers. In cell A1 of sheet 2 I will fill with a certain code that appears in column E in Sheet 1. The result I would be looking for should come from Column A in Sheet 1. I thought that the following would work copied into B1 of Sheet 2 but it doesn't appear to - =VLOOKUP($A1,'Sheet 1'!E$1:$E$481,1,FALSE).
Currently, I have a standard vlookup forumla that looks like =Vlookup(B2,Sheet2!A:G,5,false)
However, the data on sheet two is ever expanding--each month, specifically. And I need to return the most recent (so, rightmost filled) column. Right now, the column is 5, but next month it will be 6 and so on and so forth.
The below piece of code carries out a vlookup on a defined cells value and produces a result in sheet one, however if the column index number in sheet 2 (Database) is empty the result 00/01/1900 is produced.
I'm not sure how to say leave the result blank if the column index number is blank.
Excel 2010
Userform = Tab 1
Database = Tab 2
when the largest number in column B the hotel in column A should be in bold.
So in excel language IF(Number in B Is Max display corresponding hotel in column A as BOLD. But I can't figure out how to do this.
You can see here on the image:
additionalimage.gif
I'm trying to write a code that calculates 2nd column based on 3rd column's number or vice versa based on the condition set on the 1st column. Below, there are two procedures. "SimpleCalc" and "SimpleCalc2". I first wrote SimpleCalc2, but it isn't working, so I worked around the error by writing SimpleCalc, which selects a cell and moves around by offset. I personally find it hard to read and error prone as I develop more logic around it.
I'm trying to develop more function based on this code, so I need to make it neat and flexible. what I'm doing wrong in SimpleCalc2? Or do you have any suggestion to improve the code "SimpleCalc"? I'm using Excel 2003.
Sub SimpleCalc()
Dim SimpleMethodRng, SimpleMethod As String, i As Integer
ActiveWorkbook.Worksheets("Dashboard").Range("P5").Select
SimpleMethodRng = ActiveWorkbook.Worksheets("Dashboard").Range("N5:P12")
For i = 1 To 8
SimpleMethod = SimpleMethodRng(i, 1).........
I have a spreadsheet with sales which I colour green when they are outstanding and red when they are despatched. I would like to automatically add a 1 in an adjoining column when the cell is green (eg outstanding) or zero when they are despatched so that it totals up the number of outstanding orders.
a b
172.95 (this column would be green)
024.00 (this cell would be red)
124.00 (this cell would be green)
132.25 (this cell would be green)
I work in a factory where we create different types of units daily. Below is a list of planned production on a specific date, say today's date. This is a very crude example, with information missing, and it is important to know that there are conditions attached such as:
The types are added randomly. The amount of types is much greater meaning that each type is on it's own page with breaks between. Everything produced on this date will have a URN (unique reference number) with its first 6 digits equating to yy-mm-dd and the last two being the position of the unit in the production sequence (first=01, second=02 etc).
I have gotten it to the point where if you enter them in sequence (Type A first for example) it will lookup to see the last assigned URN and taking the quantity into account issue the correct URNs.
The issues I have are when the URNs are less than "10", there is a problem displaying the 0 before the digit which disrupts the sequence. I can provide more clear examples if required.
Type A
Date08/04/2014
QtyURN
101314040801-03
203514040804-08
462114040809
123914040810-19
Total18
Type B
Date08/04/2014
QtyURN
245114040820
290114040821
689114040822
Total3
Type C
Date08/04/2014
QtyURN
1111414040823-36
211214040821-22
675514040823-27
Total21
I am creating a tool that is populating information off of another excel document and presenting the information in a different format then the data originally appears. Basically I am unsure how to create a formula, for example, in cell A1, that as I drag it down (A2, A3, etc) the column letter in the formula advances but the row number remains the same. In another words as the formula moves into cell A2, the "Sheet1!D3" changes to "Sheet1!E3", where as normally it would advance to "Sheet1!D4". I just started back up in excel, im sure this is way easier then I am making it seem but I have been unable to come up with a solution.
View 4 Replies View RelatedI have the following sample data set and I'm trying to return the appropriate column header based on criteria (i.e. DDD) and a number value which will be somewhere within the range of the table. In example below, the value returned should be Header 2 because the value is greater than those in Header 1 column (range H9 to L26).
Here's data table:
CriteriaHeader 1Header 2Header 3Header 4
ZZZ5.0015.0050.00130.00
ZZ5.0015.0050.00130.00
Z5.0015.0050.00130.00
YYY5.0015.0050.00130.00
YY5.0015.0050.00130.00
Y5.0015.0050.00130.00
DDD5.0015.0050.00130.00
DD5.0015.0025.0075.00
D5.0015.0020.0065.00
RRR5.0015.0015.0045.00
RR2.5010.0010.0030.00
R1.503.0010.0025.00
UUU0.751.505.0020.00
UU0.751.505.0020.00
U0.751.505.0020.00
P0.751.505.0020.00
T0.100.105.0018.00
CriteriaNumberValue
DDD10.00Header 1>>>=INDEX($I$9:$L$9,MATCH(I29,INDEX($I$10:$L$26,MATCH(H29,$H$10:$H$26),)))
I'm creating a macro that creates a co-ocurrence matrix from variables that are adjacent to each other.
In order to proceed, I need to know how to return the column number of the first (leftmost) column in a range that the user selects.
I was wondering, is there a function that would take, lets say, every 4th cell value from a column and create another column consisting of every 4th number ?
View 2 Replies View RelatedI need formatting to highlight the dates in Column H if they are a greater than a week or more from Column G. Tried some different ways of doing this with the conditional formatting but cannot get it to work yet
View 12 Replies View RelatedI am trying to get the number of records/samples in column C between two dates in column A.
View 9 Replies View RelatedIn my spreadsheet, I have a column for credit card totals (G) and cash totals (J)
I am adding the amounts for Food (Column B), Liquor (Column C), Wine (Column D), Beer (Column E), and Taxes ( Column F) for a total in Column G.
However, Column G is only for credit card totals and I want to do the same calculations for cash totals (Column J) using the same B through F Column without those numbers being plugged back into Column G, when I have no credit card total.
I have a spreadsheet with rows of data. I need a formula that will return the column number of the last column in a row where there is a value >0.
Let's say that cells A1:F1 contain values. Some have values of 0 while others have values >0. I need a formula in cell G1 that will tell me the column number of the last value >0.
A B C D E F
0 2 5 0 6 0
So the formula in G1 would return a value of 5, which corresponds to column E.
i have 2 sheets one called "IS" and the other called "AS" in cell a2 of "IS" is a number that i need to have excel look up in column a of "AS" once it find that number i need it to return the number thats in column e of that row to sheet "IS"column d. summary: a2 of "IS" looked up on sheet "AS" and returns the number in column e to cell d2 of "IS"
View 3 Replies View RelatedIn my spreadsheet the formula
=count(k:k)
gives 8 which is correct.
But I know ONLY that the column is 11 (that is 11 th column). Then how do I write the above count formula wilthout using column letter k.
0 01
0 02
0 03
1 03
0 05
2 06
0 07
in column 2, something may have multiple numbers, but it must have something in column 1 that is equal to 0.
ex. everything above is ok except the 2-06 because it needs a cooresponding 0-06. I need some way to flag these so that i know when there is something in column 2 without a cooresponding 0 in column 1
A column:
18
42
55
11
65
72
80
48
..
I want to put/write to B column the some numbers (42,11,72,48..) in A column.
B column:
=A2
=A4
=A6
=A8
..
How can I achieve it?
in a macro i have this: col=cell.column 'suppose col=16384. then i need to place in a cell this formula =(XFD2708*100/XFD2597)-100 so i'm looking for "something" that can convert 16384 in XFD.
View 2 Replies View Relatedhow to find text from a row in column, where is a lot of text and return row number, of located text?
View 15 Replies View Related