I need formatting to highlight the dates in Column H if they are a greater than a week or more from Column G. Tried some different ways of doing this with the conditional formatting but cannot get it to work yet
View 12 RepliesIn my spreadsheet, I have a column for credit card totals (G) and cash totals (J)
I am adding the amounts for Food (Column B), Liquor (Column C), Wine (Column D), Beer (Column E), and Taxes ( Column F) for a total in Column G.
However, Column G is only for credit card totals and I want to do the same calculations for cash totals (Column J) using the same B through F Column without those numbers being plugged back into Column G, when I have no credit card total.
I have a spreadsheet with rows of data. I need a formula that will return the column number of the last column in a row where there is a value >0.
Let's say that cells A1:F1 contain values. Some have values of 0 while others have values >0. I need a formula in cell G1 that will tell me the column number of the last value >0.
A B C D E F
0 2 5 0 6 0
So the formula in G1 would return a value of 5, which corresponds to column E.
I am trying to get the number of records/samples in column C between two dates in column A.
View 9 Replies View RelatedWhat is the formula for getting a minimum number other/greater than zero from a column of added numbers?
View 13 Replies View RelatedI am setting up a Cattle management system in excel 2007. In the column F are the date of births for each individual animal. Example: F2 13/03/2013 F3 23/05/2013. I would then like to highlight the cells with the dates in to find all the cattle that are under the age of 16 months from the current date.
View 9 Replies View RelatedI have 18 columns of numbers, I need to figure out how to highlight the lowest number in each column, only if it is a unique value... in other words, only if it doesn't match any other number in that column. I'd also like that number somehow paired up with it's row's indentifier and put somewhere in a report.
View 9 Replies View RelatedI have sheet 1 and in c3
d3
1st
copy
[Code]....
this two column compare for duplicates and I manage to highlight (actually not bold) the number that is duplicate but I dont want to highlight the 2nd, 3rd & so on duplicate number in c3 (highlight 1 only from the 3 numbers most of the times got 2 only) . (row start from c3 to c2000 and d3 is up to d2000 also). I already use CF for highlighting the duplicate in C3 which my formula in CF is
=IF(ISERROR(MATCH(c3:c3,$c$3:$c$780,0)),"",c3:c3) I just try to do this formula and it works, but I dont know how to command not to highlight the 2nd, 3rd & so on duplicate number in C3 (C3 only can have duplicate number within the column; D3 doesn't have any repeat number in the D column.
I need to do the same formula command for other 2 partner columns (compare for duplicates this two columns & the 1st column if have to many duplicates highlight the first number that have more than 1 duplicates only) cells need to do again is for E3 & F3; G3&H3; until AU3&AV3..
is it possible to count how many highlighted cell (not bold) there is in a column (I mean total highlighted cell) and put the answer in cell C1, E1, G1, I1 ... AS1 , AU1. Tq again..
I have sheet 1 and in
c3
d3
1st
copy
1347
0934
[Code] .......
This two column compare for duplicates and I manage to highlight (actually not bold) the number that is duplicate but I dont want to highlight the 2nd, 3rd & so on duplicate number in c3 (highlight 1 only from the 3 numbers most of the times got 2 only) . (row start from c3 to c2000 and d3 is up to d2000 also). I already use CF for highlighting the duplicate in C3 which my formula in CF is
=IF(ISERROR(MATCH(c3:c3,$c$3:$c$780,0)),"",c3:c3)
I just try to do this formula and it works, but I dont know how to command not to highlight the 2nd, 3rd & so on duplicate number in C3 (C3 only can have duplicate number within the column; D3 doesn't have any repeat number in the D column.
I need to do the same formula command for other 2 partner columns (compare for duplicates this two columns & the 1st column if have to many duplicates highlight the first number that have more than 1 duplicates only) cells need to do again is for E3 & F3; G3&H3; until AU3&AV3..
is it possible to count how many highlighted cell (not bold) there is in a column (I mean total highlighted cell) and put the answer in cell C1, E1, G1, I1 ... AS1 , AU1. Tq again..
I would like to highlight the cells in Column A the have numbers in them. Starting with that number shift down based on the number that many rows and highlight them.
HTMLSheet1 *AB154020842*4020843*4020844*4020845*4020846*4020847*40208483
5010909*50109010*50109011*50109012*50109013*50109014*501090153
50112016*50112017*50112018*50112019*50112020*50112021*501120222
50206523*50206524*50206525*50206526*50206527*50206528*50206529450212430*50212431*50212432*502124
I want to find the minimum value of column A if there is anything greater than zero in column B. I tried this formula (simplified): MINIF(B2:B6,">"&0,A2:A6) And it gives me the # NAME? error
View 6 Replies View Related need to understand the easiest way of highlighting the highest and lowest number in a range of cells several times in the same column.
As I said the cell range will be in the same column. So highlight the highest number green and lowest number red in cells a3 to a9 and then repeat the same process again in cells a11 to a17 and so on.the cell references are an example.
So I have several separate sets of numbers in the same column.
I have a range of dates B1:B100 which I want to compare to a certain date A1 and see how many are greater than my stated date A1.
I've tried with countif(B1:B100, "=>A1") which I thought would work, but it gives the error Value!
How do I do this?
In my Excel spreadsheet I enter todays date in a single cell (A2), then I list various dates that jobs come into shop in other cells (A8:A108). I have cells ( F8:F108) where I have been manually entering an asterik (*) for those jobs equal to or greater than five days old in cell (A2). Is there a formula that can do the math for me? I've tried Excel help but to no avail.
View 3 Replies View RelatedWhat I am trying to do is sum values for each day of the month up to a designated date.
Example:
A1=any date of the month
A2-A31 = 6/1/2012-6/30/2012
B2-B31 = values that correspond to each date
how can i sum the values in column B from the beginning of the month to A1?
I have a column say column B for example that has a list of dates in the format dd/mm/yyyy. I would like a summary at the top of the columns to state how many dates there are for the current month. But I wondered if this was possible based on the TODAY() function or similar. Thus the user would not have to change anything.
So for example at the start of the month it may state 14. Half way through the month down to 6 and at the end of the month 0 for example.
Trying to compare a list of names in 2 columns. Column A has a short list of names I'm looking for in the long list of Column B.
How can you create the macro that does...
If any value in Column A matches any value in Column B
Then format (bold, highlight, etc...)
I'm trying to calculate the number of days between dates in column A and B. I've looked at the examples in this site and thought I used the formula correctly, but the cell returns an error message when I type: =DATEDIF(A1,B1,"D")
View 7 Replies View RelatedFormula to highlight a cell in a column when compared to each value in another value. If I have the columns
A B
1 1
1 2
2 3
3 5
4 7
7 8
I want the values in column A to be highlighted if the excist in column B, both of the number 1:s.
how to make a certain type of date automate. It's kind of hard to explain, but basically, I'd like to make it so that when I enter a date in one column, another column will automatically populate with the 1st of the next month. For example:
If I enter 4/26/2009 in the 1st column, column 2 will read: 5/1/2009
If I enter 1/19/2008 .................................................. 2/1/2008
Also, it's very important that if the FIRST date is already the first of the month, then the second column will read the same. For instance: If I enter 3/1/2009 in the first colum, the second column will ALSO read 3/1/2009.
I'm trying to create an excel worksheet as follows:
Column1 Column2 Column3 Column4 Column5
Date Time In Time Out Hours Worked Pay
01/03/2000
01/04/2000
01/05/2000
.
.
11/11/2008
I want to insert in the first column (Column1) dates starting from 01/01/2000 all the way up to today, 11/11/2008. So I would end up with a unique date on each row.
To accomplish this manually would be a daunting task. I'm a newbie to excel and don't know how to use any in-built functions.
I am trying to find the median of a set of numbers on a column that correspond to dates on the left column. I want a monthly median average of the numbers on the right which correspond to the dates on the left. So for example. I want to make an equation that gives me the median of all the numbers on the right if they fall within the range of a certain month(in this case October). I've tried These:
=IF(COUNTIFS(A:A,">=10/1/12",A:A,"
How would I count unique dates associated with another specific value on a worksheet?
For instance, Lets say I want to count each day a particular person makes a sale.
Example:
Sales PersonSale IDSales Date
Don 1001/6/2014
Don 1401/7/2014
Don 1601/8/2014
Jack 1011/6/2014
Jack 1021/6/2014
Mike 901/5/2014
Mike 1031/6/2014
So on another worksheet, I'd have:
Sales Person Days with Sale
Don 3
Jack 1
Mike 2
The Formula would go into the "Days with Sale" Column.
I am trying to get a formula that will search one column range “B” and pull data from another, “D”. Dates are down column “B” and some of those dates are repeated several times. In column “D” there is only one piece of data (a number) entered for each day. Eg, if 08/06/2009 has been entered 3 times in column “A”, there will only be data entered in 1 of the cells of column “D” and blank cells in the other 2.
Column B -- Column D
07/06/09 -- 54000
08/06/09
08/06/09 -- 62000
08/06/09
09/06/09 -- 61000
I couldn’t get the LOOKUP function to work properly, as there are duplicate dates in column “B” and I often got a result of 0 returned.
As I’ve only got 1 piece of data added in column “D” per day and any duplicate days would just have blank cells in “D”, I can actually get a SUMIF function to work, SUMIF(B3:B60,DATE(2009,6,8),D3:D60). Although it does work, it doesn’t feel right using it and I would prefer a formula that would return just the one cell, instead of the sum of a range of cells.
In a worksheet, how do I convert a column of dates into a column of each date's numeric value?
View 7 Replies View RelatedI have a set of data with daily total returns (TR) for 218 companies on the FTSE350 between 2007-2013. The Data looks as follows:
Company ..............Date(daymonthyear)..... TR
1........................... 112007 ..........................10.4
1 .......................... 212007 ..........................10.2
1 .
1 . .
1 .......................... 30102013 .........................12.3
. . . .
. . .
. . .
2............................112007 .......................... 4.5
2 ............................212007 ..........................4.6
2 .
. .
. .
Etc.
. .
. .
218.......................30102013 .....................13.2
I want to perform a dickey fuller test to see if there is a unit root, but for this I can’t have repeated time values, thus I need to create a daily average TR for each day (Thus summing up all TR values for all companies that have data on TR available on that day and averaging them).
How in excel can create an average value for TR every time a series of numbers in the “date” column take the same value? The best thing possible would then be if this could appear so that I have a data set that looks like
Date (daymonthyear)........ TR
112007 ..............................13.2
.
.
.
.
30102013............................ 9.4
I am trying to find a solution for highlighting cells in a column that are repeats, ie. >3. I also need these cells to only be highlighted if the adjacent cell in the next column contains specific text. I have tried using conditional formatting with a countifs formula to no avail.
View 2 Replies View RelatedI am trying to check column b which hold dates then add up column c if the month is the same
B C
02-may-14 0.05
02-jul-14 1
11-Jun-14 14
20-Jun-14 0.34
26-Jun-14 15
26-Jul-14 21
This what come up with
=SUMIF(B2:B140,"02-jun-14",C2:C140)
But this will only add up dates that are 02-jun-13 I would like it to add up all dates in June.
in column a I have dates and in column b I have names.
eg
A1 = 1/1/08
A2 = 2/3/08
A3 = 3/1/08
A4 = 3/1/08
B1 = Jenny
B2 = Jenny
B3 = Jenny
B4 = Pat
I am trying to count the number of instances of "Jenny" in January.
I tried =sumproduct(A:A,>=39448
I have an Workbook where on Sheet one it shows a date of a sold item in Column AH. On sheet two Column AG references sheet 1 Column AH. On sheet 2 I need it to delete the row if the date is greater than 1/0/00 ( which is an empty cell in sheet 1, but for some reason shows it as "1/0/00"). I have tried this code but I keep getting errors:
[Code] .......