The Bs. consulting can take any values from business process like Bp1 or Bp1 or Bp2...
for this i have written validation macro
If Target.Address = "$C$21" Or Target.Address = "$D$21" Or Target.Address = "$E$21" Or Target.Address = "$F$21" Or Target.Address = "$G$21" Or Target.Address = "$H$21" Then
do the validation;
end if;
this works fine, but i need to use or condition , is there any better way to write this, a more compact way,
i'm having a really hard time figuring out how to use target. offset to grab a range of cells. For Example:
I am currently running a macro that searches column "D:D" for data. When the data is found, i want to be able to Grab columns D to AG for that row, and apply conditional formatting. It seems like using Target.Offset should be able to accomplish this, but i can't figure out how to specify a range using Target.Offset. Currently, i have to specify each cell i'd like to select, and apply formatting one at a time, which has bloated my code considerably (and causes me to run out of room very quickly).
Below shows a example table: *ABCDEFGHIJKLMNOPQRSTUVWXY11458912131415192122232728293234363741444548492314
The table above has numbers from A1:Y1. The blue number is the target number, which is selected in cell H3. I want selected numbers from the target number H1 going along each 3 numbers on the right to get the number 22 which is after the 3rd distance. For example the number would be 22, 29, 37 and 48, which are all in red. After the number 48 it should start counting from the beginning and reach to the target point H1. In this way it will select 5 and 13 also. In total it would be 6 numbers selected. The target point can be selected from A1:Y1 but in this example case is H1.
The table below shows the final 6 numbers, which are obtained after the results along each 3rd distance numbers. *AAABACADAEAF1222937485132
when I manually delete a row or column in my worksheet - the macro target addresses do not update.
For example, I have a Target.Address of B5 If I delete column A from the worksheet, I want the macro Target.Address to update to A5. Currently the Target.Address remains B5 even though the cell I am interested in has now moved to A5...
Here is my worksheet Sub Macro1()
If Range("B5") = "Yes" Then Rows("6:10").EntireRow.Hidden = False Else Rows("6:10").EntireRow.Hidden = True Range("C6:C10").ClearContents End If
End Sub
Here is my workbook Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address(False, False) = "B5" Then Call Macro1
i am needing to issue a dos command in excel? basically i need to send a target link to a file. i cant use a hyper link for several reasons, and this is the only way i know how to go about this.
Private Sub CommandButton1_Click() Worksheets("Sheet1").Activate Range("A1").Select Selection.End(xlDown).Select ActiveCell.Offset(rowOffset:=1, columnOffset:=0).Activate ActiveCell.PasteSpecial End Sub it errors to: SELECT METHOD OR RANGE CLASS FAILED
I am currently using an Intersect statement in a worksheet module to perform two things: 1. Insert a time stamp into row 2 when row 1 has a price inserted 2.To clear that time stamp if the price is deleted at some later date.
My problem is with the time stamp value being deleted by the user. If I try to clear the price (now that the time cell =empty) I get a Runtime error 91 - Object Variable or With block variable not set.
I would like to convert this code to a select case statement but I'm not sure how to do this in this situation. Would error coding be appropriate in this instance?
The only problem is that once cell $A$1 changes to either Billable Impressions or CPM's to trigger the events the code keeps looping or formulating and won't stop... once I end the procedure if I hit enter in any cell it starts again and same problem persists...
way I can adjust this code to stop it from continuously calculating? ...
This piece of code copies cell info from column A into cell B1 only when cursor 'scrolls' on Col. A
How can i modify the code so that it copies into cell B1 when cursor scrolls up/down regardless of col.?
Private Sub Worksheet_SelectionChange(ByVal Target As Range) If Selection.Cells.Count = 1 Then If Target.Column = 1 And Target.Value "" Then Range("b1").Value = Target.Value End If End If End Sub
when I use worksheet_change for something so simple to do, it prevents me from deleting cells.
When I try to delete the cell values from A2 (5) and A3 (6), they won't delete unless I delete the value on A1 (True).
Private Sub Worksheet_Change(ByVal Target As Range) Application.EnableEvents = False If Range("A1").Value = "True" Then Range("A2").Value = 5 Range("A3").Value = 6 Else End If Application.EnableEvents = True Exit Sub End Sub
I have a number of columns, each containing several thousand points. For each column, I need to know the percentage of points that are within a certain percentage (1%, 3%, and 5%) of a target number.
I get and error which says Procedure declaration does not match description which might be because of ByVal Target As Range if this can not be used than what can be the exact solution for this as i have to get the Target address
Private Sub Workbook_SheetCalculate(ByVal Sh As Object, ByVal Target As Range) Dim sht As Worksheet Dim shtChild As Worksheet Dim lngRow As Long Dim intCol As Integer Dim strValue As String Dim Target As Range Dim rng As Range Application.ScreenUpdating = True Application.StatusBar = False Set sht = Sh............
Why doesn't the IS operator return True when comparing Target to a range in VB when they are indeed the same? Why do we have to keep backing in via rng.Address = Target.Address or Not Intersect() Is Nothing?
Private Sub Worksheet_SelectionChange(ByVal Target As Range) **** ****'_____Works_____ ****If Target.Address = "$B$2" Then ********Application.StatusBar = "To Be" ****Else ********Application.StatusBar = "Not to be" ****End If **** ****'_____This fails_____ ****If Target Is Range("A1") Then ********Application.StatusBar = "A1 sauce anyone?" ******** ****'____But this works_____ ****ElseIf Not Intersect(Target, Range("A1")) Is Nothing Then ********Application.StatusBar = "żAlguien quiere salsa A1?" ****End If
End Sub
Again - this is just me wondering why... Am I missing something terribly obvious here?
(Edit) I am guessing it has to do with the Target argument for SelectionChange() coming in ByVal instead of ByRef, but not sure... (End Edit)
I have a spreadhseet where columns I and J (range from I6 to J300) serve as input cells, off to the right, 23 columns over in AF and AG respectively I have a hidden array formula (Index, match) calculating values based on input in either column I or J and several factors embedded in reference table in the same sheet. That works fine. I want cells in columns I and J to be interdependent, in other words, input in column I drives calculations in a hidden formula and I want the value of that calculaton to display in column J (in a adjacent cell input in I6 results in display in J6), but if I input value in J then this value will drive calculation in a hidden formula and display in I (let's say I is centimeters and J is inches). I have a code that works (I set it up as a try just for few rows) but only one code section at a time, not together. If I choose column I (#9) to go first in code, values update in J, but not the other way around, if I choose column J (#10) to go first in code, values update in I, but not the other way around. What am I doing wrong, I tried Target.address case, I tried Intersect ... is nothing then etc. They all work one at a time but not together. Here is the code as it stands now
I am trying to look through a multiple selection of cells (in Target range) and compare to see if these are Integer. I am failing to be able to cylce through the selected cells and check their value. I am sure it is VB 101 issue... but I am lost at cracking it.
I have a named range that expands and contracts based upon the amount of data that is in some column. Call it AllData_UsedRange.
I have another named range that actually refers to a range. Call it AllData.
Column A Row2 56 Row3 44 Row4 65
AllData is a named range that refers to the range A2:A65536 AllData_UsedRange refers to A2:A4 by way of this formula. =OFFSET(AllData,0,0,COUNTA(AllData))
How to I obtain an address of AllData_UsedRange in VBA code?
These do not work... ThisWorkbook.Names("AllData_UsedRange").RefersToRange.Address Evaluate(ThisWorkbook.Names("AllData_UsedRange"))
I know that I can return the value of a defined name range, the address, and even the value of the define name, but if you are given a range address, how do you find its corresponding defined name in code?
I have a command button on sheet MASTER. When the workbook is Activated I want it to check and see if in sheet COSTM, cell B3 there are the words "Project Number", if so then show command button (ClearPrevious), if not, don't show. Also, when the If statement is finished, then the workbook needs to end up showing the sheet MASTER. I have tried various codes and none work, or they are on perpetual loops. I know this has got to be simple, but cannot find an example to take from to solve the issue. Would appreciate any help offered. Below is code I have right now.
Private Sub Worksheet_Activate() If Sheets("COSTM").Select Range("B3").Select = "Project Name:" Then Me.ClearPrevious.Visible = True Else Me.ClearPrevious.Visible = False End If Sheets("MASTER").Select End Sub
I have main worksheet (target a) that I am trying to populate data from target(worksheet) b. The data I am trying to get from target b changes every month,(declining balance) based on a new month. So how can I get financial data from different cell each month from "b" into same cell in "a"? (so "A" # would be overwritten in same cell based on new # from "B". I have tried VLookup but can't be doing something correct.
I am using a piece of track changes VBA code mentioned on this site, which among other things creates a new column that reports the number of any cell that has been changed (e.g., $K$32). What I would like to do is, next to that cell, report the title of the row in which that cell appears. In other words, if someone changes cell $K$32, for easier reference I'd like others to be able to see that this cell appears in a row titled "New Sales". I'll be happy to clarify with more specifics if need be.
My workbook holds a month template and sheets for each month. I work on modifications in the template ,but would then like to update all the monthly worksheets. I recorded a macro to show me how to start programming the vb sub, but get a runtime failure 'error 1004 Select method of range class failed' when trying to select the column to copy,
