Get Range Address Of Filtered Table
Nov 17, 2006
it seems that the string range.address is not always equal to the complete range address.
I mean, I noticed that, if rg is a range,
Dim rg As range
...
rg<>Range(rg.address)
In the cases I noticed it, the range was an union of many ranges, and the string Address was already big, but not 1 kBite long.
My question: is there a way to get the *complete* range address, without this restriction?
I would like to use the address property, because I would like to have my range without sheet information.
So I use often : rg=Range(rg.address)
View 9 Replies
ADVERTISEMENT
Dec 11, 2012
I have a range that has been formatted as a table. Once I've applied a filter, if I try to select all of the rows, and delete the visible rows the option is greyed out.
Is there no way, short of vba, that I can just simply delete the visible rows?
View 1 Replies
View Related
Mar 26, 2013
I have a table which is refreshed from a view on our SQL server. I use a part of this data further on and would like to automate the following: I would like to have a range set which I can use to loop through data. The range should hold the filtered data of table "PremiumTable", the columns "Grouping2", "Price", "Grower"
I have found a couple of posts giving the ability to create a range of visible cells and specific columns, but I wasn't able to combine this yet.
View 2 Replies
View Related
Jan 8, 2008
Objective: To copy visible data from a filtered table (excel 2007) into an array.
Attempted solution: arr = Range("table1[#All]").SpecialCells(xlCellTypeVisible).Value
Problem: This approach works fine until the first hidden row in encountered, at which point the array ends. Visible rows beyond this point are not in the array. Could someone tell me what I've missed, or suggest a suitable alternative. I'm aware I could probably loop through the range manually (though I'm not exactly sure what to test - I can't get the range.hidden property.), but it seems like there ought to be a better way.
View 4 Replies
View Related
May 25, 2014
I have a table A-AP 4-499 (row 4 being the column headers and 5 being the first row of data).
I'd like to remove some of the filter drop-down arrows as they aren't needed for some column headers and they also look unsightly.
This code works to remove all of the arrows:
Sub HideArrows()
Dim c As Range
Dim i As Integer
i = Cells(1, 1).End(xlToRight).Column
Application.ScreenUpdating = False
For Each c In Range(Cells(1, 1), Cells(1, i))
c.AutoFilter Field:=c.Column, visibledropdown:=False
Next
Application.ScreenUpdating = True
End Sub
However, I want to only remove arrows in the following column headers: A, G, I, J, K, M, N, O, P. I want to keep the rest.
View 3 Replies
View Related
Oct 31, 2013
I've got a macro that adds new data to a sheet and updates an existing pivot table.
It's been working fine but ever since I've had to have two items in a field hidden it won't show any new data in the pivot table.
For example, the field firm name has two items hidden after the update any new firm names that weren't in the report before won't show up in the pivot table. The pivot table recognizes that it's part of the full data set but the checkboxes are all unchecked for the new firm names.
this is the code i"m using to update the pivot table:
'Update Pivottable
DSRWKB.Activate
DSRWKB.Sheets("Pivot").Activate
[Code].....
View 1 Replies
View Related
Jul 3, 2014
I would like to be able to find the largest visible area of continuous rows in a filtered table. I know one possible way would be to loop through visible cells using the "xlCellTypeVisible" property and count cells in each visible area. However, the data is consisted of tens and sometimes hundreds of thousands of rows so I was wondering if there is a faster, more efficient way to do this.
View 3 Replies
View Related
Aug 1, 2014
I need to be able to query a large date range by a small beginning and end date range and return a count when the value is = each search criteria. i.e. - Search one year of dates from a table by Beg: 7/23/2012 to End: 10/21/2012 and return a count. The beginning and end dates are dynamic and I will need to reference the cells, i.e. B102 "Beg" B102 "End" and not a static date.
View 7 Replies
View Related
Mar 22, 2013
I have on sheet 1 a table 12 columns, variable rows. I filter this table on two different columns, so that only x rows are visible.
My aim is to move these visible rows to another sheet 2, starting from cell J23., work with these data in other cells of sheet 2, and send them back to sheet 1, adding the date in column 12.
Do I need, sheet viewcode or module ?
Afterwords I would like to link this VBA code to a form button.
View 3 Replies
View Related
Jul 18, 2013
When I filter my pivot table and I click on the button. The Filtered pivot table will automatically be copied to another sheet.
View 4 Replies
View Related
Oct 14, 2013
How to show my data as % of grand total and include the filtered data. Whenever I filter out a category in my pivot table the % values adjust for everything unfiltered. Is there a way to have my percentages include the filtered data?
View 1 Replies
View Related
May 2, 2014
I have a table of data with column headings. I'd like to be able to filter the table based on the column headings, however I have a 'spare row' between the column headings and the data which I use to add new entries to the table using a macro (the macro copies the row and pastes it in one of the empty rows at the bottom of the table, then sorts the data which places it with the rest of the data).
The problem is, Excel won't let me apply a filter to the table if the column headings are separated from the data that I would like filtered.
View 8 Replies
View Related
Nov 4, 2012
I have several spreadsheets referencing the "Data" sheet's table (about 35 columns, and the row lengths will differ from 10 to several hundred).
I need to be able to filter the table in "Data", and have the hidden rows not show up everywhere else in the document. I have both vlookups and index formulas in the other spreadsheets, and what I'd like to do is be able to filter by any column in the table and have only the shown results show in the other sheets.
I know this might be accomplished using subtotal, and Row, etc., but how to set it up with the different formulas I have going on in the sheet that pull data from the table. I need this to work with both the vlookups and index cells.
View 1 Replies
View Related
Aug 22, 2006
In the sample worksheet, I need VB code to copy the formulas in column D, to paste them as values in the same cells (without removing autofilter by clicking on menu Data>Filter>Autofilter, then edit>copy>paste special>values).
sample2.xls
View 5 Replies
View Related
Jun 25, 2009
I have a data table with all my data in it. I want to be able to filter the data, and have a column automatically calculate a running (or aggregate) sum of the filtered (visible) information in a particular column of the table.
If you glance at the attached sample spreadsheet (in 2nd post!), you will quickly see what I mean. I am searching for a formula for column L that will caculate a running sum for column K. In column T, you can see the results that I'm looking to reproduce in column L. Each cell in column T simply adds the K column value for that row to the previous value in column T (the cell above). However -- to my knowledge, and as in this case -- the formula for column T can only be copied down the column AFTER the table has been filtered.
View 3 Replies
View Related
Aug 26, 2009
I have a long list of delegates attending functions on different dates and need help with 2 problems:
A) List has filters by date/venue etc but I will want the table to be visible even when list is filtered.
B) I am using the following formula to count "=SUMPRODUCT(--($E$3:$E$728="Thursday 3rd September 2009"),SUBTOTAL(3,OFFSET($E$3,ROW($E$3:$E728)-MIN(ROW($E$3:$E$728)),,1)))" and this works but if I filter to another date then 3rd September shows 0.
View 6 Replies
View Related
May 23, 2013
I'm trying to use countifs on a filtered table to find the sum for a column based on 2 criteria.
I've used =SUMPRODUCT(SUBTOTAL(3,OFFSET(Sheet3!K7,ROW(Sheet3!K7:Sheet3!K7:K20000)-ROW(Sheet3!K7),0)),--(Sheet3!K7:Sheet3!K20000="Yes"))
for a single criteria which is great, but I also need it to look at column B.
In a non-filtered table it works as:
=COUNTIFS('Sheet3 '!$K:$K,"Yes",'Sheet3 '!$B:$B,B5)
Is there any way to do this?
View 3 Replies
View Related
Aug 22, 2006
in the sample worksheet, I need help with a VB code to copy the formulas in column D, to paste them as values in the same cells (without removing autofilter by clicking on menu Data>Filter>Autofilter, then edit>copy>paste special>values).
View 3 Replies
View Related
Jan 8, 2008
I wonder - is there a way to copy the green range over the filtered cells in col. C !? (I want to Copy range D20:D23 on to cells: C5, C9, C13, C17). I tried to select "Visible Cells Only" as the target for Pasting onto (using [F5] etc...) but no success. I prefer a solution that does not involve VBA. *** see attached picture.
View 2 Replies
View Related
May 1, 2014
I'm making a macro that filters a data set and then inputs a value into all of the rows for a certain column. When no results show up for the filter I receive a runtime 1004 error because there are no cells to select.
Here is my code:
Sheets("External Buys").Select
Range("G5").Select
Application.CutCopyMode = False
Selection.Copy
Sheets("Raw Data").Select
ActiveSheet.Range("$A$1:$AU$10432").AutoFilter Field:=39, Criteria1:= _
[Code] ......
View 1 Replies
View Related
Mar 3, 2007
Does anyone know the formula that produces the address (e.g. $A$1) of a cell within a table? I found the formula that gives the address of a single cell within a single row (or the address of a single cell within a single column). But I need the formula that gives the address of a cell where the row intersects the column. If I know the column header name and the row header name, how do I find the cell address for the two dimensional intersection?
View 11 Replies
View Related
Nov 11, 2012
I'm trying to copy a whole bunch of tables with identical layout to a master table, so I can create a whole bunch of pivot tables that include data from ALL the various tables. The source tables MAY be filtered, and I can't work out how to copy them easily while also INCLUDING any hidden/filtered rows while at the same time leaving any filter settings on the source tables intact.
If I use something like range("Table1").Listobject.DataBodyRange.Copy then it only copies the VISIBLE rows.
But I want ALL rows to be copied to a master table.
1. I don't want to unfilter the sources tables, because users might still want the source tables to remain exactly as the user filtered them. (However, it doesn't matter if the DESTINATION list is filtered or not). I realise that I could copy the entire sheet to a temp sheet, then unfilter any tables on that sheet and THEN copy these to the master list. But wan't to know if there's a simpler way.
2. I DON'T want to use SQL to create a pivot table directly from the tables, because the tables will have further information added to them from time to time, and so if I use SQL to make a pivot directly from them, I'll have to recreate the pivot cache using that SQL query each time, which might muck up the settings in any existing pivot tables. I realise that I could use SQL to copy the data to a 'staging area', and just point the pivot table at that.
3. I can't use PowerPivot, because its not installed in this environment.
View 1 Replies
View Related
Aug 10, 2008
I have a named range that expands and contracts based upon the amount of data that is in some column. Call it AllData_UsedRange.
I have another named range that actually refers to a range. Call it AllData.
Column A
Row2 56
Row3 44
Row4 65
AllData is a named range that refers to the range A2:A65536
AllData_UsedRange refers to A2:A4 by way of this formula.
=OFFSET(AllData,0,0,COUNTA(AllData))
How to I obtain an address of AllData_UsedRange in VBA code?
These do not work...
ThisWorkbook.Names("AllData_UsedRange").RefersToRange.Address
Evaluate(ThisWorkbook.Names("AllData_UsedRange"))
View 9 Replies
View Related
Feb 26, 2014
I have 5 pivot tables on 5sheets, all looking at the same source data in sheet 6
On the source data there is a filter on the headers, if you change the filter, is it possible for all 5 pivot tables to update according to the filter?
My starting point is the below, but there probably is a better way but i would want the sourcedata to equal visible rows on the source data sheet headers run A:K and up to row 10000 .
View 2 Replies
View Related
Dec 3, 2013
I have a Choose function that is used to determine which range I need. e.g. =Choose(Choice,Cell,Cell,...).
In each corresponding "Choice" cell is a typed range. e.g. $B$33:$L$70
I'm looking for a way to be able to use this typed range as the range for some chart data.
View 2 Replies
View Related
Aug 25, 2006
I know that I can return the value of a defined name range, the address, and even the value of the define name, but if you are given a range address, how do you find its corresponding defined name in code?
View 4 Replies
View Related
Sep 2, 2008
How would I modify the code belwo to insert the copied range above the existing data in the worksheet? (The part giving me the problem is in bold italics.) Also, how would I modify this code so that it only copies the filtered data, NOT including the column headers?
View 14 Replies
View Related
Oct 23, 2012
My first worksheet contains the following information:
Column A contains parent category names (e.g. colours)
Column B contains lookup values (non-unique)
Column C contains value to return
Each subsequent worksheet is for a single parent category (i.e. a sheet per unique category)
I'm unsure how to write some code that will return column C for each worksheet
Example of first worksheet:
A
B
C
1
Group
Item
Amount
[code]....
From this, my code creates 4 new sheets named Red, Orange, Blue and Green with column A containing the item numbers that relate to the worksheet name in the table in the first sheet (e.g. column A in sheet Red contains item numbers 1 to 6 inclusive):
A
B
1
Item
Amount
2
1
x
[code]....
In column B, I could like to return the values in column C from the table in column C that are only specific to that worksheet name.
I think I want to filter column A in the first sheet against the sheet name and then perform a VLOOKUP on the filtered data or would using a dynamic range be better?
View 3 Replies
View Related
Nov 29, 2006
i have issue copying data from a filtered sheet to another sheet. i only want to copy visible cells....ie when there is no data or data after filtering i have: selection. currentregion.copy. this dosent work as when there is no data it still copies my column headings in row A1 across to row r1 and then to next sheet. how do i write code that will only pick up the filtered data starting in first cell...ie after filtering this could be any number. for example i only want to copy data if row 2 and downwards has data
View 2 Replies
View Related
Apr 3, 2008
how I can copy top 15 visible values from a specific column in an autofilter, without actually setting the "top 10" values in the macro for that column. So somehow copy the first 15 cells. The code should fit somehwere in this I guess:
Sheets("A").Select
Columns(5).Cells.SpecialCells(xlCellTypeVisible).Copy
Sheets("B").Select
Range("M6").Select
ActiveSheet.Paste
Could I put an extra variable by the .paste so it only pastes 15 values. Perhaps behind the copy??? I've tried to put .Cells(15) but that doesn't work either, which is a pitty. I'm clueless here, and couldn't find anything regarding this (without using fixed ranges, ...)
View 3 Replies
View Related
