Validate That A Field On A VB Form Is Filled Before The OK Button Is Executed
Mar 21, 2006
I have a Form that user fill in information on, once they click the OK button, excel is filled with the inserted text on the form in the correct cells.
My question is, how do I validate that they have actually entered data in some cells, which I want to make mandatory, and if they have not, prompt them (this could be a simple message box) to fill it in. Let them fill it, and once they click OK again, check again... until all the mandatory fields are filled, only then will the macro fill in the excel cells.
i have this code which askes the user for a job number once the workbook is opened.
Private Sub Workbook_open()
' If sheet was named by original open routine, exit
If ActiveSheet.Name = "Main Roof" Then Exit Sub
' otherwise
Do Returnvalue = InputBox("Please Enter a New Job Number.", "Information")
' Allow changes by entering q as the Job Number If Returnvalue = "q" Then Exit Sub
' Delete the ' from the front of the following two lines and ' then when you enter q as the Job Number you will also be ' asked for a password. The default password is toe.
what iam trying to do is get it to open the userform "WorkSelection" after it has completed the above code.
I have a Database and user form, in the user form i have a field named “Vehicle No” this is a combo box from which a user needs to select the Vehicle numbers, and all these are working fine now, I need your help in the following:
When user selects the second field named "Select Vendor name" i need a pop up window which shows all the Vehicles belongs to the vendor which they have selected, and with the popup window user selects the vehicle number then the Vehicle number combo box should be filled.
Currently users have to select by scrolling through Combo box which takes long time and difficult to find by scrolling.
I have inherited support for the an Excel 'program' that seems to be fairly unstable. I am currently having problems with the following code in a subroutine (executed when the user presses a command button):
With ActiveSheet.PageSetup .PrintTitleRows = "$1:$7" .PrintTitleColumns = "" .PrintArea = ActiveSheet.UsedRange End With
Sometimes it works and sometimes I get the following error: Run-time error '1004' Unable to set the PrintArea property of the PageSetup class.
… on the .PrintArea = ActiveSheet.UsedRange
I am having a hard time figuring out what is causing its wishy-washiness. Running the following code (launched from worksheet named 'consumer' with a command button):
So i have been working on this and i am so close. I need to make it so when you enter c in column J it will delete that row and move it to sheet 2 to the next available row. At this point i have it deleting the row and moving it over but it keeps using the same row and over writing the the lines already there. Here is what i have gotten so far.
I am looking for a macro or code that if a field not filled or choosen in userform, there will be a error message says "cant continue, please make sure all fields are filled etc..)
I believe it s asked before, but I cant find the relevant thread.
I'm making a data entry form for a user, and one of the fields is in a time format (mm:ss). Is there any way that I can validate that field in "cmdOK_Click()" so that when the user clicks "ok" on the data entry form, if they haven't entered a date a msgbox comes up.
I tried IsNumeric with an If function but to no prevail.
I am creating a spreadsheet where the user enters food they have eaten that day. The way this is done at the moment is with validated list boxes, one depending on the other using the indirect function. I want to be able to make this into a user input form. Is there a way of adding these validations from the spreadsheet, to an input form. I want the input form to have an input for the day, food group, food item, and quantity of the food. The food item needs to depend on the food group.
1: TextBox for Input Username (txtUsernameIn) 2: TextBox for Input Password (txtPasswordIn) 3) Submit Button (cmdSubmit1)
I have a Worksheet ColA: Username ColB: Password And this entire Range A:B, I have named "UserRegister"
I have code, attached to the cmdSubmit1 button on my UserForm. The purpose is to allow access to a veryhidden Worksheet "ADMIN".
The code 'works' if I enter in both the correct UserName and Password (ie: the code completes & Admin sheet opens up).
The code 'works' if I enter in the correct UserName and the wrong password (ie: code completes it's run, my msg pops up to say there is wrong input, unloads the form & sheet ADMIN stays veryhidden).
However, if I enter the wrong username (with either right or wrong password) the code breaks and I get a debug error. I know my code is obviously wrong/missing something etc - but I can't work it out! The line of code highlighted on the break, is between the *** below
VB: Private Sub cmdSubmit1_Click() Dim Username As String Username = txtUserNameIn.Text Dim password As String password = txtPasswordIn.Text
Currently I work on a file which will be more like a form which will be filled by user and after he or she hits the button, the filled data will be written or sent to another Excel file or even Sheet in the same workbook which will store the filled data in database like form. The same as some web form which will post the data to database.
In other words, the workbook contains to sheets, one with forms to be filled in (cells) and one with specified columns. After filling in the cells on the first sheet and hitting the button, it will trigger the macro which will send data to second sheet and post data from each cell to appropriate column.
I'm trying to pull up a second form from a command button within a form. There's a command button in a sheet to open the first form (frmOrderInput.) Then there's another command button in that form to open the second form (frmPriceInput.)
This is probably really straight forward but cant see why it happens, the following macro works fine when called by a button created by the form toolbar but doesnt when called by a command button, get the runtime error 1004, "select method of range class failed"
I am imagining a spreadsheet with the equivalent of an info button in each cell of column A. The idea is the user clicks the button to open a User Form containing additional info about the entitity represented by values on that row.
E.g., Row 1 is labels, row 2 is all about Bob, 3 is about Jane, 4 is about Freddy. If the user clicks the info button on row 3 then a user form opens up and displays additonal info about Jane.
I am wondering if there is a way for VB to identify which row the clicked button was on without having to write individual code for each button telling VB which row the button was on.
I am hoping there is some form button property I can reference or interrogate which will give me a cell address; a button.position property or similar. This will obviously save me a lot of coding if VB can dynamically determine which row is being interrogated as there will be a couple of hundred of these to start with, potentially thousands. (I realise Access is a better solution for database interrogation, but I have to work with excel at present).
Ultimately, the user form that the button calls up will have a list box on it and I want the list box to default to the entity on that row, and allow the user to browse the other entities if they want to.
If there isn't a solution for this I will just have a single info button for the users to click that opens the user form and then they can select the entity from a list box. But I would like to offer the "intelligent display" option but don't relish coding the equivalent of several hundred "You clicked button four hundred and seventy six, default to info card for bert".
How can I allow users to either select the SKU from the dropdown menu, or to type in the SKU # in the dropdown menu (C5 through F5) and have it populate the data fields for that SKU when they press the 'Enter' key?
Currently using Data Validation ='KVM Comparison Data'!$B$4:$OP$4 and cell logic to allow the information to be pulled from a hidden tab =INDEX('KVM Comparison Data'!$D$2:$OP$65,MATCH('KVM Product Comparison'!$B6,'KVM Comparison Data'!$A$2:$A$65,0),MATCH('KVM Product Comparison'!C$5,'KVM Comparison Data'!$D$4:$OP$4,0))
In short, I want to keep it the way I have it, but allow users to also have the option of typing in a SKU and pull the data up that way. I know this is possible, I just can't figure out how to do it, while keeping my current solution in place as well.
How can I have a form field automatically fill some aspects of the data that's input? I've seen it before, like a phone# field automatically including the dashes.
I would like to automatically include colons in a time field. So if I were to type "081500" (or even "81500"), it would complete it as "08:15:00".
I have a text field at the bottom of a user form that remains hidden (i.e. visible = false) until the user clicks the "Ok" button. At that point, I want the text field to appear as the macro is running (it's a large macro, so the text field just says "processing, please wait...").
I have cobbled together (borrowing from examples I have found online because I don't know VBA) a form which inserts a date into a spreadsheet.
The trouble I have is that this date field is in USA date format and I need UK.
If I enter 03/01/2009 into the form, it appears in the spreadsheet as 01/03/2009. I have formatted these cells to display the month only and because of the way it was entered, the next column displays MAR instead of JAN.
I'd like to create a go back field/button/something that would allow a user (who is on a row, in a column very far right) to click to go straight to column A for that selected row.
how can I change the button/shape name of a Form Button in Excel 2003? I assigned a name using the NameBox, however if I try to change the name via the NameBox, it does and work and the old name remains.
I have a userform that adds and deletes employees. The add button works but im not sure how to get the delete button to work. I have a defined name of "Employee" that is row "A". What I would like to happen is that when a employee is selected from a userform list and the delete button is pressed the employee is deleted and the form is updated.
I've built a form in VBA which is working great. I now want to call it by creating a button in a worksheet and then assigning the Form macro to it so the user can just click a button. I've tried looking for it in the Assign Macro dialog and it isn't there (even though I've declared it as a public sub) and I can't call it from a normal Module as it says it's an undeclared variable.
I have a macro associated to clicking a form button.
If possible, if a certian cell value is equal to 0, I want to diable this button. I do not wish for theuser to be able to run the macro associated with that button click.
If found something similar, but in my case, I cannot find the equivalent to CommandButton1, if that's even what I'm using.
If Worksheets("SHEET").Range("A1").Value = "" Then CommandButton1.Enabled = False
I have downloaded a great add in. ButtonFace. However, I am not sure how to include these images on my form's buttons. I can do this fine on the worksheet buttons but is there a way to use ButtonFace on a form's button?
how I can connect a button to a form text box for the purpose of making a simple user friendly search box that will work when the sheet is protected.
So someone enters their criteria into the text box (and it is a text box from the form toolbar - not the drawing toobar) and then hits the button "QUICK SEARCH" and it does what the CTRL+F function does in excel.
I am creating a userform in Excel 2007 which requires a user to pick their name from a drop down box then press Ok, what i want to do is disable the Ok button until the user field has been selected.
I have several files with form control buttons that automate functions but, on occasion, they get smaller relative to the worksheet they're in. At some point, they become unuasable unless they're manually resized.
I have a rather large sheet with lots of embedded form control buttons, each one with a document link. Is there a function (no VBA) to search for a specific form control button in excel? for example: i want to find the form control button which is linked to the "application" document.
