Values In Sheets Gets Divided By 10
Excel 2007. Trying to enter a number in a cell in a spreadsheet
(a) opened with the "blank workbook" (new spreadsheet)
(b) created with Excel 2003 and opened in excel 2007
(c) created with Excel 2007 and emailed by someone who isn't having that problem on his Excel 2007 installation
Any number I type in is automatically divided by 10. The only way I seem to be able to prevent this is by entering a decimal point when I enter the number. Have tried several different formatting options, although in 2007 I can't seem to find how to "uncheck" fixed decimals. Tried General formatting and fixed decimal formatting, and nothing seems to work. Looked for hidden macros, none show up when I click on View Macros.
View Complete Thread with Replies
Related Forum Messages:
#DIV/O! Error Divided By Zero
Hi, I found another problem with my pool spreadsheet.
In the Calculation worksheet, region P3:AU27 ;
Within that table, it would be nice to have the formula's filled for the entire table but as it stands, I have to drag the formula every time we play, I'd like to lock that page so I don't make a mistake in it. Because I get an #DIV/0! error that screws up all the results.
Is there a way to fill that table with the formula so I don't have to touch it and the results will be calculated properly?
The function of the said table is to give the players their true average in percentage. It calculates the amount of points they accumulated individually everyday they played, compares to the total possible points in that day and returns an average.
So to recapitulate, if I drag the formula's form " Calculations " " AI " to " AJ ", I'll get errors if there was no score entered in the Player DATA sheet. Any way to avoid this ?
BTW, I'm using excel 2007.
Lowest/Minimum Divided By Highest/Maximum
I have a sheet of about 15000 rows made up of about 1300 groups( events) and 40 columns, a miniature of which is attached.
In column1 I have the event identifier,column 2 contains a score or rating for each contestant in each event.,in column 3 there is a code for each competitor,either orange or pink.There will be at least 1 orange and 1 pink in each event.
column 4 is the one I want to create by formula,the lowest pink in each event
divided by the highest orange. I have titled this column the spread. I have filled column 4 manually to illustrate what I mean.
Compare Values From Two Different Sheets
If the record exists in both sheets then compare the value in col. H for both records, if the value is different then copy the entire record to a third sheet.
There are 16,000 rows of data to do comparisons.
I have been thinking about a Vlookup method as one choice, my thought is this going to be slow.
I have read about vba having some comparison choices, vbbinary, vbtext, but I do not have any knowledge of this, so cannot intelligently choose what options to begin w/.
Summarizing Values From Other Sheets
In the first sheet (EQ MOVES) I have:
Column A contains a list of some 300 different pieces of equipment.
Column D is where the foremen enter the job number (4 digits) and job name of where the foreman wants the equipment to go the next day.
In the second sheet (PERSONNEL MOVES) I have:
Column A contains all employee names.
Column D is where the foremen enter the job number and job name of where the foremen want the employees to go the next day.
In the third sheet (SUMMARY) I have:
A box in A1 where I type in a job number (4 digits) but no job name.
A2 says "EQUIPMENT and B2 says "PERSONNEL".
A3 and below should list all equipment to go to that job listed in A1.
B3 and below should list all personnel to go to that job number.
Compare Values In Different Sheets
I am in the process of comparing values between two sheets.
I would like to search on column A on both sheets and check whether there is a corresponding value in the sheets.
If there isnt then I would like to take that record and put it into a new sheet.
My code is as follows
Dim iCounter As Integer 'counter as integer
data_sheet = "CASES_ANALYS"
data_sheet2 = "A_CASES_"
target_sheet = "Final Report"
Currently I'm just displaying it in a msgbox but would like to paste the specific record into another sheet but not sure how to do this.
So far this code doesnt work
Lookup Values In Two Different Sheets
I have two worksheets with different data in them. In worksheet "Sheet1"
A B C (?)
1 01 03
2 01 03
3 01 03
4 03 03
5 02 04
In worksheeet "Sheet2"
A B C
1 01 03 Mechanical Engineering
2 01 04 Aerospace Engineering
3 02 03 Electrical Engineering
4 02 04 Electronic Engineering
5 03 03 Hospitality
What i would like to do is to fill in the C column in Sheet1 by checking if the value for A and B columns match up with those in Sheet2, then copy the value in C column and put into C column in sheet1. for example if A1 = 01 and B1 = 03, then it is Mechanical Engineering. I was thinking of using VLOOKUP but don't think it'd take "if else" criteria.
Calculating Values Across Different Sheets
I have a large spreadsheet with about 250 worksheets, each of which contains among other things a row of values that require further calculation (the values are being entered manually). The format of these rows is simple:
Count 1 3 2 4 3 2
Given that these rows are identical in size and they are in exactly the same cell positions in each of the 250 sheets, I need to find a way of getting each of the values entered in each of the 250 sheets automatically copied across to a different sheet and added to an existing total. In my limited understanding of Excel I consider such operation to be similar to a sum function which involves multiple cells in multiple sheets. Despite my best efforts I’ve yet to find a solution to what may be a very simple problem.
Return Values From Different Sheets
I pull a report (Form2), and I want to import values into another sheet (Form1).
From Form2, I want to import the cell value in $D# based on the name in cell $C#, when the name in $C# matches the value in D2 on Form1. Ultimately, the value from $D# will return to cell G5 in Form1.
Compare 2 Sheets By Row With Multiple Values
I have attached an example to better explain. I have 2 sheets that I need to compare. The main comparison is the Account #. So You take the account number on the inputted info sheet and look for it on the invoice sheet. This is what it needs to do:
If account is on user inputted but not invoice the information gets put on the results sheet. If the account is in both compare the code values columns F:Q. The main issue I'm having here is that the value aren't always in the same spot. for example you could have "5C" for code 2 and "5J" for code 3 on the user inputted sheet but on the invoice sheet "5J" could be code 2 and "5C" could be code 3, with the quantities in their respective places. When placing information on the results sheet the job info should come off the user inputted sheet.
Add Values & Formula To All Sheets In Workbook
Apply Macro Code To All Tabs / Sheets. My macro is only working for the first tab and not for all the others..Following is the code
Application.Calculation = xlCalculationManual
Application. ScreenUpdating = False
For Each wks In Worksheets
' Columns("I:I").Insert Shift:=xlToRight
Range("I4") = "Invoiced Amount"
Range("I5").FormulaArray = _
Application.Calculation = xlCalculationAutomatic
Application.ScreenUpdating = True
Im not able to attach even the zipped file since it's a little larger than the norm.
Paste Values As Text And Add Headings To New Sheets
I have a couple of small problems I hope someone can help me with. I have attached a test workbook. The ExtractSN macro searches column B for serial numbers and copies each one to its own row while copying all associated data to the individual rows to the TEMP sheet.
I need this macro to copy the 3 header rows from each source sheet to new destination sheets, then copy the numerical values as text to the respective sheet to preserve leading zeros and any letters. If the new sheets could be named the same as the source sheets and add _RPT to the end of the name, that would make things easier.
Copy Hidden Sheets To New Workbook As Values
I have a macro that copies 2 worksheets of an open workbook "Combined Sales Tool" and saves those 2 sheets in the root of the C drive with a variable name.
I want to know how I can #1 close the newly created workbook, #2 focus back to the original workbook "Combined Sales Tool", hide the 2 sheets that were copied to the new file, then close the original workbook with (and for example without) saving
part of my code below:
Dim OutApp4 As Object
Dim OutMail4 As Object
Dim cell As Range
Dim filedoc As String
Dim emailatt4 As String
Sheets("Summary").Visible = True
Sheets("Email").Visible = True
Sheets( Array("Summary", "Email")).Select
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
Application.CutCopyMode = False
Transferring Values From Different Sheets By Text Match
find attached sheet of example.
In the attachment the supplier sheet is the sheet we get from our suppliers and it shows us the products they have in stock along with the prices and other information. This sheet has over 900 products on it. It is updated daily which we download and then paste it over the existing data.
The Deviltronics sheet is the products we have added onto our website. It has a code in column E which tells us if the products on the supplier sheet is in stock or out of stock. (this was done by the help of someone here)
Both sheets have been cut down considerably so that we can add them as an attachment on here.
So now I am going to tell you what I am trying to do!
What we need is a code that will automatically copy the trade price, suggested retail price and the shipping cost from the supplier sheet and insert it into the Deviltronics sheet next to the relevant product (say in columns F, G and H). This done by matching the product code part numbers in both sheets as done with the existing code on the Deviltronics sheet (column E).
Inserting Rows Dynamically With Values From Other Sheets
We have a scenario like this:
1. Data (Let's say 5 fruit names are entered) will be entered in sheet1 (row wise)
2. Data (Let's say 5 flowers names are entered) will be entered in sheet2 (row wise)
2. Entered data in sheet1 and sheet2 should get automatically populated in sheet3 under respective headers (header 1 - fruits and header 2 - flowers)
Rules : 1. We will have Headers with one default empty row
2. With addition of every row in sheet1 or sheet2, a row should automatically inserted in sheet3 under respective headers and populate data.
Rename Sheets Based On TextBox Values
Say you have a userform with 10 TextBoxes, let’s call them TxtN1…TxtN10 and your workbook has 10 sheets, say “Sheet1”…”Sheet10”. Now if one wants to code a procedure to rename those worksheets when the user hits a command button it’s simple enough.
For i = 1 To 10
With Sheets(“Sheet” & i )
. name = TxtN & i
But now if the user then changes the textboxes TxtN1…TxtN10 to a set of new strings it’s obvious that the following coding segment will not work:
For i = 1 To 10
With Sheets(TxtN & i)
.name = TxtN & i
It goes without saying that the program will try to select the worksheets with the new name (and they obviously don’t exist yet)…
Importing Values From Sheets To Create Unique List
I need to be able to pull information from 5 columns on 5 different pages, and pull all of the unique names out of it. From there, I need to create a list of all of these names. More often than not, this could only be three names, but I still would like this to be automatic because eventually it could be 50 or 60, and manually editing this list would get tedious. Lastly, is it possible to have a list create cells? For example: I have information on row 4, this one will start on row 6. My next group of information starts on row 14. That leaves 7 rows for information. I don't want to leave a large gap at the top of the page, so I'd like to be able to create cells if the list I'm trying to create has more information on it. Seems plausible in my mind, but I'm still new to excel.
Total Values In Cells To The Right Of Certain Information From A Range In 90 Sheets
I have a blank sheet and need to total values in cells to the right of certain information from a range in 90 sheets in other workbooks contained within the same folder.
for example the range is O13:AX500
the first text to search would be "P1", that could be found several times within the range in each workbook with the sheet named "plant"
The value to total would be found in the 2nd cell to its right, ie "P1" in cell O13 then value "£290" in Q13 ::: "P1" in cell X365 then value "£100" in Z365 and so on throughout all 90 workbooks.
The total of the referenced values would then be placed in say B1....
I have around 500 reference codes to total throughout the 90 workbooks so maybe having a list of the text reference down column A may help the process.
Is it possible and can anyone please help with the code to look at a piece of text in new sheet with cell A1 to A500 containing "P1 to P500" and then total all values in the cell 2 to the right in every workbook and place the total in new sheet cell B1 to B500
Hiding Columns And Sheets Based On Combo-box Values
I have an activeX combo-box that selects from different pieces of equipment that we supply. Based on that selection, I require ranges from the same page that the combo-box is on to either hide or unhide. Also, I require different tabs to become visible or hidden based on that same selection. So far so good - I have code that does this, and it appears to work without glitch.
Where the problem arises, is in one of the ranges that is unhidden when a particular piece of equipment is selected there is another combo-box that I would like to use (the number of said pieces of equipment to supply) to further hide/unhide additional ranges on the same page, and also hide/unhide certain tabs as well.
When I make a selection from combo-box 1, all works as planned, but when I change the state of combo-box 2, even with no associated coding referring to it, I cannot change combo-box 1 again without getting Error 1004 "Unable to get the Hidden property of the range class".
None of the sheets in the workbook are protected.
I would sincerely appreciate any help/code that could circumvent this error.
Copy Rows To Other Sheets Depending On Values In Column
I’ve done a search of the forum for a macro and found some post that seems to be about what I want to do, but unfortunately my minimal vb experience prevents me from adapting them to my requirements.
I‘ve got a workbook with three sheets; say Sheet A, Sheet B and Sheet C. I want the info in Sheet C copied to either Sheet A or B depending on the info in cells in Column A of Sheet C.
Sheet C contains customer info, there are about 9 column headings and up to 30 000 rows (Individual customers).
The cells in Column A will contain a number between 0 - 23. What I want the macro to do is, if a cell in Column A contains any of these numbers, 0, 1, 2, 6,7,8,9,10,17,19,20,21,22,23, I want that whole row copied to Sheet A and if it contains 3,4,5,11,12,13,14,15,16,18, I want it copied to Sheet B. The cells will only contain one number, never a combination.
Copy Data By Number Values In Column To New Sheets
I've come across the post by Dangelor but can't reply to it directly so have started a new thread quoting the code. I'm trying to select entire rows of data based on specific values in a column and then paste those rows to a new worksheet.
This code loops 10 times and creates 10 new sheets. Any chance someone could explain some of the code to me and adapt it to suit my situation?: Data will be in sheet 1 ("Data List"). I want search down the rows and if the value in column 2 is "1" copy that row to the sheet named "Heat 1", if the value is "2" then copy that row intt the sheet "Heat 2", etc.
Dim Data As Variant
Dim DataFound() As Variant
Dim iValue As Integer
Dim j As Long
Dim i As Integer
Application. ScreenUpdating = False
For iValue = 1 To 10
With Worksheets("Main") 'change name as needed
Data = .UsedRange.Value
Redim DataFound(1 To UBound(Data))
For j = 1 To UBound(Data, 1)
On Error Resume Next......................
Match Values Between 2 Sheets, Copy All Corresponding Data & Sum Results
I want to locate the corresponding acct number between worksheets “primary_data” and “qty_movement” and once a match is found (from acct worksheet) then copy over the acct numbers and the share data to the results page. If there is no match I don’t want anything copied to the results page, just ignore that data on either worksheet “primary_data” or “qty_movement”.
•Both ranges on “primary_data” and “qty_movement” worksheet are variable, as accts are left off or kept on depending on the daily activity so the ranges are never set.
•I need to concatenate on “primary_data” worksheet cells A&B&C to get acct number
•concatenate on “qty_movment” worksheet cells B&C (need to keep zeros in front of actual numbers for acct number reasons)
•these accts need to be cross referenced as the accounts on the “acct” worksheet (pre-populated with corresponding acct numbers that never change and will always be on that worksheet)
•If a match is found on the “acct” sheet then I would like it to either replace the acct so they match on both worksheets or just to recognize those accounts correspond with each other and do the below.
•then take the 2 concatenated acct numbers off of “primary_data” and “qty_movement” in the I cells and copy them over to the “results” worksheet as well as the share data from “primary_data (column E)” and “qty_movement(Column D)” and then compare the 2 share amounts on “results(column E)”
i need to elaborate on anything, the attached sample sheet shows what i want to do, but without any formulas or code.
Find Current Date On Several Sheets & Convert Surrounding Cells To Values
I keep track of values in a workbook. I accumulate them on a daily basis (business days) and keep track of the older values.
On the first sheet I have all current values automatically displayed.
All subsequent sheets contain the values for the different locations (>60) by one location per one sheet with multiple entries per location.
Most of the values do not change daily. So I copy the values from the previous day and paste them to the current day’s fields (the row below yesterday's values).
Today’s date (and prior dates as well as subsequent dates) are in column A, the values to be copied are in column B through AZ. With over 60 sheets this job becomes very tedious very quickly...
What I would like to be able to do, with a click of a button, is to go into each sheet (except the first one), go to the current date (in column A), select the field to the right of that date (in column B), go up one field, select both fields (today and last business day) and go from B to AZ (or A to AY in relative terms) copy all those entries, go down one field (to the same row as today’s date) and paste the content. Then repeat that for every following sheet…
As the date field that I am looking for goes down one field with each day I cannot use fixed points to copy and paste from, but have to use the date field as an anchor from whence to find the proper cells.
I do have some values in the following day's fields, that is why I need to copy two rows and not just the values from the previous day...
Hide/Show Sheets Based On Cell Values & Validate Entry
excal VBA programming.I have attached the file name "help" for your easy explanation purpose.
1. Is it possible to hide sheet nos. 1,2,3,4 & unhide the sheet as wished by me by puting the value (1or 2 or 3 or 4) in B3 cell.
2.There are per day production rate in E18 to E22 cell. Now whenever I will give value in H18 or H19 or H20 or H21 or H22, it will check whether the value is same with the respective E 18 or E19 or E20 or E21 or E22 cell. If both the values are not equal then give a message box "WARNING!!! YOUR VALUE IS NOT SAME". Can it be possible by creating VBA programming.
Copy Sheets("data").range As Values Only
I just need to copy the values
Dim LastRow As Long
If WorksheetFunction. CountA( Cells) > 0 Then
'Search for any entry, by searching backwards by Rows.
LastRow = Cells.Find(What:="*", After:=[A1], _
' copies SUSD_DATA to SUSD Database
Range("SUSD_DATA").Copy Sheets("SUSD Database").Range("b" & LastRow + 1)
' copies SUSD_DATA to SUSD Database
Range("Defects").Copy Sheets("Defects Database").Range("b" & LastRow + 1)
Run-time Error '1004' Method 'Add' Of Object ' Sheets' Failed Adding Multiple Sheets
I have been running a simulation for about 18 hours now and just received:
Run-time error '1004':
Method 'Add' of object ' Sheets' failed
I have been creating new sheets, importing data, pulling some values from the data then deleting the respective sheet. I am using:
The sheet is actually being added to the workbook, seemingly before the error. I resume the code, and a new sheet is placed in the workbook and it errors again. The Debugger stops and highlights on the code above.The sheet count number was 10895 at the error, just as an indicator of how many times the simulation has performed successfully. I am hoping this is something I can fix without having to start over...
Hiding Sheets But Still Letting Macros Run When Printing Hidden Sheets
i have a workbook that has the following sheets
receipt of deposit letter
delivery note (2)
i want to hide every sheet except the working sheet.
I have tried this but the macros bring up an error when i run the macro
my macros involve printing certain pages dependng on what button is pressed
i get an error whatever
how do i stop this
Delete Chart Series Across Sheets But Skip Protected Sheets
I have received following macro from someone to delete series but the problem is that it gives error when some sheets are protected, and I want those sheets to protected. When run it will ignore/leave protected sheets but delete series only from unprotected sheets
Private Sub CommandButton1_Click()
Dim Rng As Range, i As Long, r As Range, lVal, uVal
Dim DeleteCount As Double
Dim lRow As Long
Dim dr As Long
Dim dc As Long
dc = Sheets("Deleted Numbers").UsedRange.Columns.Count - 1
dr = Cells(Rows.Count, Sheets("Deleted Numbers").UsedRange.Columns.Count - 1).End(xlUp).Row + 1
If dr = 60001 Then ................
Re-Naming Sheets Per Cell Data & Hiding Sheets
on sheet1 I have a button I need to do the following when clicked:
(1) name the next 30 sheets based on cell values in sheet1
(2) for those 30 sheets, hide some of them based on a y/n input in sheet 1
To clarify: the worksheets do not need to be created, they already exist. They just need to be renamed and hidden based on that y/n criteria. see attachment with just 1 worksheet for clarification. So - The next 30 sheets are to be named by the following ranges (B7:B16), (B21:B30) and (B35:B44). For every product with a "n" in column C of sheet1, the worksheet for that product needs to be hidden.
Copy 2 Linked Sheets Without Links To Original Sheets
I have copied and then pasted & linked numerous cells from one sheet to another within the same workbook. When I copy the 2 sheets (Edit>Move or Copy Sheet>Create Copy) the linked cells on the duplicates remain linked to the original sheet. How can I copy the 2 sheets and have the cells on the copied sheet be linked to the copied sheets and not the original?
Move Specific Data From Sheets To Other Sheets
Need to move data from 14 sheets (1 pay period=14 days)(2 showing on attachment for example purposes) to time cards for each person (number of employees will vary).
Key data to move to the time card is the date of the hours, #Reg Hours, #OT hours, the ticket# and job# for those hours.(ie Chris Adams Aug 15, need Chris's Reg and OT hours (8 Reg and 2 OT) on his time sheet, and the corresponding ticket number and job number (in this case from I1, I2).
Unknown number of ticket/job numbers, but the pattern of cell entries will remain the same along the top of the date sheets.(starting at I1, then L1, O1, the next would be R1)
Unknown number of employees but they will continue filling down where the names are on the date sheets (column A). Each employee would have a time card sheet as well.
Macro Loop To Extract Specific Values And Min/Max Values From Column/Rows Range
Hi, I'm very new to writing Excel Macro's and wanted to know if I could do the following. Conceptually, I understand what I need done and think it should be fairly straightforward.
There's 2 main events in this loop (I hope that's the correct terminology):
Input 1) User defines the beginning cell to start the loop. In this case, A2.
Input 2) User defines the range of columns/rows to display. The formula for rows that I've thought of is 4r. So if a user wants 20 rows below cells A2, they simply input 5 for r. The number of columns is a constant 5. So if r=5, then I'd want the range to be A2:E22......
Convert Absolute Values To Negative Values Based On Criteria
is it possible to write a macro that will convert absolute values into negative based on criteria? Data gets downloaded from in house system which comes out as all absolute values, now i need the macro to covert absolute values to negative if the amount is either "Our Reciepts" or "Our Delivery"
Below is a small sample of data, real data is around 100 rows
Col DCol EOur Receipts1231Our Delivery1231Delivery Settlement1323
Retrieving Values Based On Matching Values On Separate Worksheets
Is it possible to have a formula where it will retrieve a specific value on one sheet based on matching values? Unfortunately, hlookup wont work as there are several values in the table where the 'lookup_value' is the same.
On sheet 1 (titled BSRC), I have a table which has a list of values in column 1. On column two I have the 'lookup value' which needs to be matched and all values underneath it to be retrieved from sheet 2 (titled CSRD). The 'lookup_value' range is on row 9 of sheet 2.
I have attached a sample spreadsheet for clarification.
Find Same Values In Different And Unequal Cell Ranges And Refer To Values
I have data similar as shown in the following:
The idea is to add compare the cells of the first column with the third column. Where same letters/words exist, the corresponding value of the first column should be added to the second column (where no letter exists equally, the space remains empty), so it will look like this
the third column always will have at least the same letters as the first column, but new letters/entries can occur.