Excel 2010 :: Data Gets Divided By 10 When Put In A Graph
Dec 12, 2012
I have a set of data (numbers) I want to include in a bar chart. The numbers appear fine in the table. When I create the chart and sets the data (the cells excel goes looking in to create the chart), the values in the cells are divided by 10 for some reason I can't understand.
I tried to create a new file and a new chart, and the issue does not repeat.
I do not know where to look in that specific file to prevent Excel from dividing every number by 10 when I create a chart.
View 2 Replies
ADVERTISEMENT
Feb 23, 2012
I have been trying to chart temperature differences over 10 day's time for six cities using a line graph. For some reason, the lines are all clustered at the bottom of my graph, with values of 0. My spreadsheet is accurate, without any blank cells. I'm using Excel 2010.
View 1 Replies
View Related
Jun 26, 2014
I have been given a task to create a line graph who has 10 categories and each category has 5 different values. I need to plot a line graph, so that those 10 categories should appear on the Y-axis instead of X-axis.
I am using Excel 2010.
View 8 Replies
View Related
Mar 2, 2014
I'd like to create a simple graph exactly like the one on the picture, but for the life of mehow to do this on Excel 2010.This is the data I have:
Seperation First target Second target
0 59.00% 0.00%
2 64.28% 40.62%
4 62.68% 48.99%
6 60.81% 65.83%
8 61.82% 70.21%
View 6 Replies
View Related
Jan 7, 2014
I am in the process of setting up some graphs. The graphs will show the last 6 months of data so they move as each month is goes. I saw a slick way of doing this using the count function but this did not quite fulfill my needs. What I was looking for is to be able to input the start month in a cell. The cell would be part of the function within the formula. I created a simplified version of the spreadsheet below.
Spreadsheet.jpg
Then I created my names using the ctrl-F3
Names.jpg
I then created the graph I wanted and wanted to use the formula =SERIES(Sheet1!$B$3,!chtCat,!chtIssuesReported,1). This kept getting an error indicated nothing really. It basically says there is something wrong with my Series function. I have a working version of a similiar worksheet I have been basing my entries on. They look almost identical but mine is failing. I also created a new file and tried this and it still fails. I can run the formula evaluator within Excel 2010 against the !chtCat and !chtIssuesReported names and they both return the correct value (which equals areas on the spreadsheet). I have also tried to enter the spreadsheet name and a tab in front of the names to get them to work and still get an error. Basicall I am trying to create the graph below (this grpah is using the hard coded locations)
Graph.jpg
View 2 Replies
View Related
Dec 8, 2011
did in [URL] but my issue is complicated by not knowing what cell I need to move the graph to.
I am using Excel 2010 and I am a realitive novice at writing VBA code.
In My spreadsheet, I have a list of properties and some related cost info. From week to week, the number of properties varies. Some days I will have 6 properties and others I could have 100. Because of this, I need to make all of my references relative to other cells. I am having trouble repositioning the graphs that I have created from the data to be 2 cells below the label I have created for the graph (which is a merged cell covering Columns B:I on a row 3 rows below the last property in the report.
So far, I have:
Dim r1 As Range, r2 As Range, GraphRange As Range
Cells(2, 1).Select
Selection.End(xlDown).Select
[Code]....
View 1 Replies
View Related
May 21, 2014
Excel 2010 and the camera function.
I have been using it to take a picture of a graph, pasting to an alternative sheet within the same workbook, and renaming the picture by a defined name. S by selecting the names from a drop down list the picture will select various different sized graphs defined within my drop down.
What I am experiencing is when I initially do this the pic works great and resizes automatically with each selection, however the next day some of the pictures resize and some do not.
Is this a glitch within excel or am I missing a setting which will resolve this?
View 1 Replies
View Related
Mar 20, 2014
Excel 2010 - I need to create a graph that shows a week's use of a sportsground showing what sports were played, on which days and between which times. I thought I could show the times on the vertical axis, days on the horizontal axis and then the sports played in those times, however I'm unsure as to how to get the graph to recognise the times.
I've attached an example of some data and how I'd like to see it, I'm just not sure how I can do this using the chart set up!
Attached File : Graphs.xlsx
View 10 Replies
View Related
Aug 28, 2012
I work with a team of users that are continually publishing reports in Word that contain charts and graphs copy and pasted from Excel into Word 2010.
We have a custom script that leverages a PDF engine to automatically convert .doc files to .PDF files that we distribute electronically to our clients. This all works great, but only if all my users select 'paste special' and Enhanced Metafile Format when adding their excel charts into our reports. Most of these people aren't tech savvy, and I'm havin ga hell of a time getting them to follow this workflow and am hoping there's a way in Office 2010 to select the default paste from excel into word when the content is a chart.
It seems like the default paste from excel is an embedded chart/graph that you can then further manipulate each component of the chart in Word; the default doesnt' paste an actual image. I am assuming the pdf renderer is using a lower resolution .PNG version of the image and when these are scaled for print and or pdf, they look like crap.
Is htere anyway I can automatically change the default paste format for the chart from excel into word to be an EMF/EMV (enhanced metafile?) Either thorugh the registry or some other saveable setting?
View 1 Replies
View Related
Apr 2, 2014
I have a lot of rows of data all divided with an empty row and if they are 6 or less all rows need to be entirely deleted any 7 or above need to be kept.
View 2 Replies
View Related
Aug 5, 2014
I was wondering, if I can extract data out of a excel graph what is been paste into word document and send to me, without the excel data sheet.
So I want to get data out of more then one graphs that are paste into word. and i want to do this in a fast way. In order to create a datasheets.
View 2 Replies
View Related
Feb 9, 2014
I am trying to graph the amount of calls that come in on each day and at what hour. I am trying to put the days of the month along the x axis and hours along the y axis. I then want the number of calls to show as a scatter at certain times on each day. Is this possible? I have attached a sample of a table I will be working with that has made up data on it. I have tried using the select data function to try and change the axis, but I do not think I am writing the correct things in.
View 4 Replies
View Related
Apr 8, 2012
I am having a graph in ppt which should be updated with a data i have.. i started lyk
Code:
Set xlsApp = CreateObject("Excel.Application")
xlsApp.Visible = True
Dim path As String
path = "C:MydocumentsBook1.xls"
Set newxls = xlsApp.Workbooks.Open(path)
Worksheets(sheet3).Activate
I donno how to update it using vba code in ppt .
View 1 Replies
View Related
Oct 19, 2012
I created a slick little excel sheet with the data coming in automatically via Access query. It has been working fine for months. Now all of the sudden there are a bunch of cells with missing data. The weird part is it's not as if whole columns are missing data, more like 90% missing. When I go to Access and run the query all cells are populated as the should be. There have been no changes to the query at all during this time.
btw...I am running Office 2010
View 2 Replies
View Related
Apr 22, 2014
Pivot Chart. I would like to set up something to where a user can click on an individual value on a pivot chart (currently a line chart set up with 4 data series) and somehow display some underlying data. I have a lot of information stored in a data worksheet that I can't display all at once, but if a user sees a questionable data point, he/she can click and learn more about it from source data, or even a new query of the data worksheet.
I am using Excel 2010
View 2 Replies
View Related
Jan 8, 2014
I have a question about using conditional formatting in excel (2010); I made a table with the following columns:
"Supplier Name" "Supplier Lead Time" "Internal Lead Time" "Total Lead Time". I made two different scenarios to show different supplier lead times and different internal lead times, and used the minimum function in the "Total Lead Time" column to find the smallest total lead time to select the best supplier.
The last thing I would want to do with this set of data, is plug in a formula that would somehow indicate which supplier corresponds to the shortest total lead time (which supplier has the smallest supplier lead time). I'd like to be able to use a formula that enters the name of the supplier in a designated cell, which I could indicate as the "Preferred Supplier" cell. If this is not possible perhaps there is a way to highlight the supplier's name with conditional formatting?
View 2 Replies
View Related
Nov 3, 2013
I am working on Excel 2010. I want to find a way to link data from one spreadsheet to another one and whenever I update the first spreadsheet, the second one will be automatically updated?
View 2 Replies
View Related
Oct 2, 2013
I have one excel 2010 workbook with 5 work sheets, each work sheet contains a list with first/last name(one column) and the company name, some have a 3rd column with their email address in each sheet represents each year starting at 2008 thru to 2013 i have to find out if the people that attended an event in 2008 also attended it in 2009/10/11/12/13 and if they didnt, put their name and company name onto a blank worksheet within the same workbook without using a macro, how can i do this?
View 2 Replies
View Related
May 17, 2014
I have a parent spreadsheet with raw data(with errors) and a child spreadsheet without errors. I want to merge the child into parent. (:{). I am thinking of comparing multiple columns from each sheet to ensure maximum accuracy. And when those columns match up we paste the corrected column data from child sheet to parent one. I am using windows 7 and Excel 2010.
View 1 Replies
View Related
Dec 20, 2012
I'm using Excel 2010 and I applied a Data Filter to a simple table. I then messed around with the drop downs in each column, sorting the data by different criteria. After doing this, is there a simple way to get the table to revert back to its original order/form?
View 3 Replies
View Related
Apr 16, 2013
I am using Excel 2010. I am a novice user.
I have a lot of data to filter / sort. I want to initially to create a filter for a column of data - which has the format similar to hierarchical paths to files. The data is a mix of text/numbers. e.g.
pathA/path_X/path_Y/path_Z/lso0_rxs_reg_254__5_0/d
pathA/path_X/path_Y/path_Z/lso0_rxs_reg_253__5_0/d
pathA/path_123/path_456/data_out_reg_17_0/d
pathA/path_123/path_456/data_out_reg_0_0/d
pathA/path_X/path_Y/path_Z/lso0_rxs_reg_255__5_0/d
[Code] .........
Doing an alphabetical sort of this date would return the following order. As you can see while each strings in unique - there are many instances where they are simialr - if you ignore the unique numeric values at the end of the string.
pathA/path_123/path_456/data_out_reg_0_0/d
pathA/path_123/path_456/data_out_reg_17_0/d
pathA/path_123/path_456/data_out_reg_4_0/d
pathA/path_X/path_Y/path_Z/lso0_rxs_reg_230__6_0/d
[Code] ......
So what I want to do is to create a filter for the strings - but ignoring the numeric bits at the end i.e.
reg_[0-9]+_+[0-9]+/d
The strings are obviiously of varying length and the number of hierarchical paths is different, so I can't split string on "/".
Similarly folder paths names can contain "_" so can't split string on this either.
As I don't know how many "/" or "-" instances there will be in the string I don't believe I can use the find function. Also as the amount of number will be different i don't think I can use =right(a1,X) either.
I may be able to search for the pattern above - as this is probabay unique - so maybe it's something like the following pseudo code:
Function GetString(txt As String) As String
With CreateObject("VBScript.RegExp")
.Pattern = "reg_d+(_)+d+//d"
GetString = .execute(txt)(0)
End With
End Function
If I do require VBA code - how do I then use this for creating a column filter? Or will I have to extract the filtered data first from the column (and its associated row data) into another worksheet to use?
Once I have the filter in place I want to create tables using the filtered data - so for example each column value above has a lot of associated data values in each row e.g
26 pathA/path_123/path_456/data_out_reg_0_0/d
32 pathA/path_123/path_456/data_out_reg_17_0/d
8 pathA/path_123/path_456/data_out_reg_4_0/d
So my table would show the name "data_out_reg" and the range of values 8-32
View 1 Replies
View Related
Dec 7, 2012
I have a workbook with data on sheet1 and a summary on sheet 2. I want to use two drop down boxes on sheet 2 (B3 and B6) to look up matching data from sheet 2. What formula is best to enable these two look_up values to be used? I saw an example where the two values were separated by a comma within {} i.e. {B2,B6}, but only got an error when I entered the formula into my Excel 2010 sheet.
I have previously used VLOOKUP, but this comes back saying I have to many arguments. I can attach the workbook if that makes it easier to explain.
View 1 Replies
View Related
May 8, 2014
I have a problem converting hourly data into daily data for electricity import capacity. My file has the following form:
| Connection | Date | Period | Available (capacity) | Where 'Connection' identifies the physical location of the capacity (4 possibilities, Germany -> Netherlands; Norway -> Nehterlands; Belgium -> NL; UK -> NL), 'Date' refers to the date, Period refers to hour of the day (e.g. 18:00-19:00) and 'Available' refers to the import capacity of electricity on that conncetion during that hour. I need daily aggregates and tried several things such as DSUM but I cannot manage I've shortened the attached file quite a bit because of the upload size restriction. I am using Excel 2010. I've tried some suggestions in similar topics but none worked for me.
View 3 Replies
View Related
Dec 29, 2011
I have a spreadsheet created in Excel 2003 (which is what we use at work, unfortunately).
My employees periodically take a test to ensure they have certain items memorized (or are making progress to that end). The spreadsheet rows show all 46 of my employees, and their test scores. The columns are the dates that the tests are administered. I can create a line graph based on the chart data, and interpolate these data with no problems.
The problem is that there are 46 employees! 46 lines on the same graph make for a very cluttered, hard to understand visual. I want to simplify the view by "filtering out" some of the data.
I have an additional column in my spreadsheet for each employee's work area (Area 1, Area 2, etc), and another column with data based on first letter of last name (the values here could be "A-G", "H-M", "N-S" and "T-Z", for example). I figure i could filter my line graph based on these two columns. For example, somehow select just Area 1, and reduce the number of lines on the graph to 16. Or better yet, Choose "Area 2" AND "A-M" and end up with 7 employees (and therefore 7 lines on the graph).
Here's what i have tried:
1) Select the work area column, and use the Filter, which created a drop-down list at the column heading. When i use this drop-down list, i can easily filter the data in the worksheet by Work Area, but this is not reflected in the line graph, which still shows all 46 lines. The problem was that i forgot that i had set the Calculation Options to "Manual". Setting this to "Automatic" (or leaving it on Manual and pressing F9) solved the problem, as the chart now updates when i use the filters. Calculation options are under the "Formula" tab in 2007, or in Tools -> Options -> [either calculation or formula, i forget what it's called] in 2003.
2) Create several separate line graphs in several separate sheets. I wouldn't want to assign someone else the task of maintaining a spreadsheet of such inefficient design.
View 1 Replies
View Related
Aug 28, 2013
I'm using Excel 2010 to link a table to a XML file on my server. I'd like to distribute the Excel file to a group of people and have it updated every time the XML file is updated on the server.
In Excel, I'm pulling the data using "Data", "From Web" and then I type in the path of the XML file.
Excel then builds a table with all the data but if the XML file is updated on the server, the data remains static, even if I click "Refresh" or "Refresh XML data" on the table.
It should be able to download new data including new columns to the table, if any.
View 2 Replies
View Related
May 23, 2014
I have an input spreadsheet to capture site addess details using Excel 2010
The Site Name is in Column A starting at row 8, each row is formatted with validation rules etc. but want only expose rows with data and one blank row to add next site.
So I needed code to unhide the next row without data - found what I needed in this thread
Have adjusted to my needs
[Code].....
It works by adding the next row but if I then delete the last rows Site Name I get a run time error with "Unable to set the Hidden property of the Range class" at follow code line.
[Code] .....
View 2 Replies
View Related
Jun 16, 2014
I have an annoying task which seems like could be performed via a macro, here is a brief explanation:
I have a table in this format:
Name
Colour 1
Colour 2
Colour 3
Colour 4
Colour 5
[Code]...
However, I need the data in the following format:
Name
Colour
Annie
Red
[Code]....
Would there be an easy way of doing this through a macro?
View 3 Replies
View Related
Aug 27, 2012
I have problems copying data (from notepad, values are in scientific notation) into Excel 2010 worksheet. This problem only occurs with one of my laptops. I also tried this on my partner's laptop and no problem at all.
My new laptop (which I would like to use in the lab) has Windows 7 professional installed on it. I bought my laptop in Austria/Germany, so I changed the language from German to English. I then installed Microsoft Office 2010 on my laptop (which I am also using on my main laptop- without any issues). I have changed my default language to English UK.
The issue is as follows: Here is a small sample of the data from notepad
3.33343e-03 1.51357e-03 0.00000e+00 0.00000e+00 4.96507e-01 3.84643e-03 6.24332e+00 1.81305e+03
I select & copy the data from the notepad (also tried notepad++) and paste it into the Excel 2010 worksheet. This is what I get in Excel:
3.33E+02 1.51E+02 0.00E+00 0.00E+00 4.97E+04 3.85E+02 6.24E+05 1.81E+08
When I use another spreadsheet package (MagicPlot Student version), there are no problems. I have also installed Notepad++ and experience the same issue. So somehow Excel is increasing the value by 5 orders of magnitude. When I copy the values from another Excel sheet into a new Excel sheet, there are no problems. I have re-installed the Microsoft Office suite several times and the problem is still there. I can't re-install Windows 7 as I don't have the installation discs.
View 1 Replies
View Related
Mar 31, 2014
When I had Excel 2010 and now with Excel 2013, whenever I open a workbook, it opens and displays to the row AFTER the last row of data. (So, if my last row of data is 38205, it will open starting at row 38206...hence I see no data until I hit Ctrl+Home). I have not found anything about this on the internet and I cannot find a setting. I need Excel to open to A1 so I don't freak out every time I open a workbook and see no data.
View 2 Replies
View Related
Mar 7, 2013
My business I work for is a collection agency and from time to time our clients send us files that are beyond recognizable for our collection software to understand nonetheless import into our database.
The file was a PDF at first but I have since been able to convert to excel format.
The data isn't too scrambled just scattered throughout rows. I would like to have rows of patient data into one row.
The file after being converted was all in row A but I have since used text to columns to divide into separate rows. However now one patient information is on multiple rows and I need each patient info on one row.
The file looks like:
|A---------|B-------|C----------|
1.John-----|Doe-----|123 Main St|
2.New York-|NY------|
3.11100----|SSN----|Balance Owed|
I would like the data from multiple rows to continue on row 1 like this:
|A--------|B-----|C------------|D----------|E--|F-----|G----|H-------------|
1.John----|Doe---|123 Main St.-|New York---|NY-|11100|SSN-|Balance Owed--|
I am no programmer in the least and have very little to no experience in pivot tables.
This file has about 7000 accounts with patient info spread through 3-4 rows for each set of data.
How I could go about doing this without manually copying and pasting into additional columns on the same row. That will take hours if not days.
View 2 Replies
View Related
