I've managed to set up a gradebook.
However, is there a way that I can get Vlookup not to return N/A when I have a blank cell on the report (not in the data table). I want to be able to calculate the progressive grade average of a stduent as the year progrsses.
I wonder a simple Vlookup formula for setting up a teachers gradebook. I need to find the average letter grade for three tests using a table. I've attached the file so you can see what I mean. I've tried, but just can't seem to get it to work.
View 3 Replies View Related=IF(LEN(G6),VLOOKUP(IF(ISNUMBER(G6+0),G6+0,G6),HistoryTable,4,0),"")
I would like this/a formula to return nothing when the cell in "HistoryTable" is blank. Right now it is returning a zero.
I have a formula that references another worksheet. Using the VLOOKUP function, it works great, except if the data on the other worksheet has a blank cell, it then returns a 0 (zero). Within the formula below, cell E10 is my "unique key" and is the only raw data within this spreadsheet. All other cells are strictly formulas. This formula I am using below works perfectly if there is complete data, but that is not always the case. =IF($E10="","",IF($E10="~ None ~","",VLOOKUP($E10,Projects!$F$3:$T$226,5,FALSE)))
View 8 Replies View RelatedThe following formula: =IF(ISNA(VLOOKUP(C11,$D$139:$E$149,2,FALSE)),"",VLOOKUP(C11,$D$139:$E$149,2,FALSE)) (located in cell D11) looks in cell C11 Baseball Players Shirt Numbers then looks in the range $D$139:$E$149 to find the Players Name and place the Players Name in cell D11, but in this case cell D11 is blank. The table ($D$139:$E$149) is laid-out as follows; no headers, Players Names are in column 1 (Column D) and Baseball Players Shirt Numbers are in column 2 (Column E). The Baseball Players Shirt Numbers are formatted General in both the table and in cell C11. I can't figure out why cell D11 returns a blsnk answer?
View 9 Replies View RelatedI have a sheet that uses vlookup when the lookup returns #na error how can i conditional format these cells to so text is same as background
View 9 Replies View RelatedI have a normal VLOOKUP of this loookup range:
A 1
B 2
C 3
D 4
=VLOOKUP(T14,U6:V9,2,TRUE)
If the value in T14 is in the lookup range, I get the expected value returned. If the value exceeds the vlaues in the lookup range (e.g. I enter "E"), I get the last value in the range (4). How do I get it to return a blank cell if the entry in T14 is not found?
I am trying to do sumif on below
A B C Total that I need to achieve
-520 Check [blank] -520
-321 Check -321 0
Criteria
Sumif B2 have "Check" add A2 then -C2Problem is C2 although shows no value, there is formula that returns Blank Value. See attached file.
i have a list of 100 product codes in row b2:cw2, colum A contains dates in the month, yesterdays first and then each previous day before that going down, and the columns B:CW are the number of each particular product sold on that day.
I'd like to insert a formula in row 1 which will look down each column and count the number of blank cells from B3 to the first cell to contain a value, i.e. the number of days since this particular product was sold.
I have a formula counting non blank cells in another sheet 'Mem' I know there are 21 entries in Column M, which it used to show as the result. Today it shows 0. The 21 entries are still there.
Code:
=COUNTA(Mem!$M:M)
The cell containing the formula is B6. The bottom bar of Excel has: Ready Circular:B6
I'm having a real problem with the Vlookup formula in that I have used it in a spreadsheet to search, using approximate, rather than exact values, several tables where I have inserted raw data with no calculations and it works fine. But with one crucial series of cells where I am trying to return results from columns of fields that are the results of calculations, it sometimes returns the correct result and other times returns an empty field with seemingly no consistency at all.
I've been careful to make sure the data in the cells in the lookup column are in ascending order, as required. I've checked the formatting (all the lookup cells are numbers, no zeros with the thousands commas inserted, and all the return cells are currency with two zeros and the $sign) and the formatting is consistent.
Does anyone have a clue whether the calculations in the cells might be the problem or if it might be something else and, whatever the case, how I can workaround the problem?
I'm a relative novice with Excel. I'm using Version 2007 but I'm saving the file as an .xls.
I am having some trouble getting a formula to work. I am building a report that pulls figures from a pivot table in another workbook. I am using a vlookup with match function to get the column index to find the relevant data I want. Where I need to add two columns together I am using sum, with the vlookup & match formulas nested in them e.g.:
=SUM(VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("FAID",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("COMM",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("BPCM",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("COMD",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE))
Where:
F13 = Employee number
Column C on the pivot 156 workbook is where the employee number is based.
The Match formula is then getting the column index from the column headings of the pivot table ie. "FAID"
This in itself works fine, as long as it finds a match in the column headings. This is where i get the error as in the above function "COMD" is not in the pivot table. However I need to keep it included as it may appear on a future pivot table. Is there a way of getting the sum function to complete even though later in the formula it can't complete the vlookup? So it will ignore it, or assume the value is zero if it can't find it? The formula probably needs to do this for all the vlookups as some headings may drop off in future pivot tables.
The formula below calculates appropriately, however, if any of the cells (E12,E14, E21, E22, E28, E29) are blank, it returns a #VALUE! error. I would like the cell to remain blank. How can I do this? The formula is listed below.
=(SUM(E34-E6)-(SUM((E12)+E14)-(SUM((E21)+E22)-(SUM(E28)+E29))))
I have a spreadsheet for which I have to set up a formula to get the minimum value from a range of cells, but that range can include blank cells, errors (#DIV/0) and zeros, all of which I want to be ignored. I can work out how to ignore EITHER the zeros
(=MIN(IF(C10:G100,C10:G10)),
or the error cells
(=MIN(IF(ISNUMBER(C9:G9),C9:G9)),
How to exclude both. If I try to combine both of these exclusion criteria it doesn't work and I end up with the answer #DIV/0, which is one of the values I want it to ignore.
spans over columns A:BM.
column headers are in Row 2, data starts in Row 3
the number of rows varies month-to-month
in column A, the values are either N or Y.
Column B contains xREF numbers, where if the value = N, the xREF is unique; for values = Y, the xREF = an N value xREF number (hope that makes sense!)
Where column A value = Y, some row cells are empty. All N record cells are populated.
starting in Column C, I want all empty cells (basically all rows where column A = Y) to be populated with a VLookup formula where:
Ø lookup_value = xREF in column B
Ø table_array = all N values records spanning B:BM
I can get it to work for column C by autofilling to the last row but if I autofill across columns, the col_index_num stays the same and I can’t figure out how to increase it by 1 as it autofills across.
Sub RangeLookUp()
Dim Rg As Range
For x = 3 To Range("A65536").End(xlUp).Row
If Range("A" & x).Value = "N" Then
Set Rg = Range(Range("B3"), Range("BM3").End(xlDown))
ActiveWorkbook.Names.Add Name:="TheRange", RefersToR1C1:=Rg
End If
Next x
' VLookup for blank cells........................
I have an Input sheet that I want to validate that the user has entered values in all of the fields before they move on. Data is in rows 5 to 25, but could be in any column starting from column d to the last column. My procedure is not producing the error message. My code is copied below
Code:
Sub InputError()
Dim j As Integer
Dim cell As Range
j = 4
Sheets("Input").Select
[Code] .......
I'm trying to to create a formula where if two different cells have no value (K10 & O10) a third cell will also be blank (N10)
I have the following formula which follows these steps when i evaluate it.
=VLOOKUP(K10&O10,$J$77:$K$98,2,0)
=VLOOKUP(" "&O10,$J$77:$K$98,2,0)
=VLOOKUP(" "&" ",$J$77:$K$98,2,0)
=VLOOKUP(" "$J$77:$K$98,2,0)
#N/A
How can i deliver a blank cell as the answer?
I have about 90+ lists of data which looks like this: (the dots are blank cells)
Set 1
D0 Jimmy
...
D1 Keith
D2 Dave
...
...
D3 Sandra
Set 2
...
D0 Andy
D1 Ryan
...
...
...
...
...
D2 Lee
Each list was originally a set of names and i have populated the "D1, D2" cells (where D1 = the first name, D2 = the second, etc).
Is there any way, on a seperate sheet i can get a list which shows the following (ie. no spaces between lines of data):
Set 1 Set 2
Jimmy Andy
Keith Ryan
Dave Lee
Sandra
Is this possible through a VLOOKUP?
I'm looking for a function that will display the average of a row of cells, while at the same time not displaying any error messages. It's easy to average cells without blank values, but to combine that with no errors is difficult for me. I saw many ways to do the average, one of which is:
= SUM(A1:E1)/COUNTIF(A1:E1,">0")
That function doesn't work for a row of blank cells (i.e., hidden rows), though. The result is an error message.
I also read about a way to ignore an error in a computation:
=IF(ISERROR(F1),"",F1)
The problem is when I combine those functions I get a blank cell no matter which function I put first, and without regards to cell values or not. The reason I want this to be error-free is that I have to average the "average column" at the bottom of the table, too (i.e., F100).
I am using a Uderform in order to check if some cells in several columns are higher or lower than values I set in my textboxes.
However, I think I am having a mistake in my code (it runs but doesnt return the correct informations) as I have blank cells in certain columns.
Concretely I am giving 1 point if the criteria is valid (if for example the value in the cell is <= 1) but some of these criteria are 1 when they should be 0.
As I said it runs but I need to add a fix for empty cells / blank cells and if possible N/A error cells in this so that the code gives 0 to the criteria and moves to the next column (next select case)..
I got a macro connected to a button that select empty cells within a range and fill them with the value above. The code looks like this:
Code:
Range("A1:A10").SpecialCells(xlCellTypeConstants, 23).Select
Selection.Resize(, 4).Select
Selection.SpecialCells(xlCellTypeBlanks).Select
Selection.FormulaR1C1 = "=R[-1]C"
[Code] .......
If you press the button twice you will get run-time error 1004 becuase Excel can't find any empty cells.
I want a function that counts blank cells before running the macro. If there are no blanks I don't want to execute the macro. That is to avoid run-time error 1004.
Read about the Dfunctions and SUMIFS/COUNTIFS not working between linked objects and think my error is the same.
SYMPTOMS: Formulas wont work unless linked workbooks are open. Once open they work and as soon as the sheet is altered after they are closed, they links break.
My formula =OFFSET(('Linked Workbook'!$A$1),0,VLOOKUP(Range,RangeData,2,0)-1) or go to workbook and bring back a certain amount of cells to the right of A$1$ based on a lookup formula in the Main open workbook.
I have the following grade scale
F = 0%, D = 60%, D+ = 65%, C = 70%, C+ = 75%, B = 80%, B+ = 85%, A = 90%, A+ = 95%
and I have these students total marks
84%
70%
72%
78%
81%
71%
76%
72%
74%
77%
72%
I want the student who took 84% which is the best to take A+
On other way, I want these marks to be on average instead of the standard scale
I know different variations of this question get asked all the time... but I can't find an answer that I'm sure will *always* do what I want.
I have a range of cells (A1:A10), and I want to count all the text entries of positive length. That is to say, I don't want to count:
blanks
numbers
zeros
spaces
errors
I'm sure I need to use the LEN function, but I can't quite figure out how.
this counting expression will be inserted in a SUMPRODUCT formula
I'm using SQL to retrieve a bunch of data from another Excel file. However, SQL only returns numbers, leaving text records with blanks (""). This only occurs in one column, which has numbers and alphanumeric values.
View 5 Replies View RelatedI am using the formula =VLOOKUP(F4,Scoring!$B$3:$C$66,2,FALSE) in column 'G' to return values from another sheet, 'Scoring', if column 'F' has a name in it the value is returned. The problem is if column 'F' is blank the formula returns ### and I cannot SUM column 'G'.
View 6 Replies View RelatedI have a vlookup formula for a table (attached), where for some reason, I cannot get rid of the #N/A value that is returned. I am referencing on the first sheet the 'No." column, and in checking for that number in the second column, am wanting to put the value in the 'moldules' column. I have tried converting the reference cells to text, numbers, have done =LEN to look at character counts, etc etc. I have also tried to build a simple dummy vlookup on a different set of data. The file is in Excel 07.
View 4 Replies View RelatedI want the A column to find it's match in the G column and place the corresponding number from the H column in the the B column. See attachment. formula is so basic: =VLOOKUP($A2,G1:H8806,2)
View 2 Replies View RelatedI have a problem with a spreadsheet that has three tabs. In Sheet1 is the first set of values and in Sheet2 is the second set of values. My boss wants me to make a third tab which pulls items from both sheets. He wants is so that any items from Sheet2 that AREN'T on Sheet1 are listed in the 3rd sheet. If they ARE listed on Sheet1, it returns a blank space. I can get it to return a blank space but every other value it pulls (In other words, values that are not on both sheets) returns a N/A instead of the value itself. Attached is the spreadsheet with just the values. Here is the formula I use in the 3rd tab to pull the info:
=IF(VLOOKUP(Sheet2!$A3,Sheet1!$A$1:$A$1044,1,FALSE),"",Sheet2!$A3). Do I just use regular lookup or MATCH instead of VLOOKUP.
Using the following formula, =VLOOKUP(A232,'[HEALTHLINK SPIFF 4-27-06.xls]Rep Total'!$A$2:$D$279,4,FALSE). returns #N/A in some cases - I would like it to return the value of Zero since I need to total the results column
View 5 Replies View Related