Vlookup To Insert The Numeric Value Into The New Column
Feb 18, 2010
Sheet 1 has a column with verbiage in it. Sheet 2 has a column of possibel verbiage with a second column of numeric values for the verbiage On sheet 3, I want the numeric value for the verbiage in cell b19 on Sheet1
Long way, create a new column on sheet1, run a VLookup to insert the numeric value into the new column, then do an "equals" on sheet 3 that point to the Vlookup results. How can I get the value onto sheet3 without creating the extra column?
I have to create 1000 dynamic ranges and do not want to do this manually. See the list below for the syntax I am using, I am only showing the first 10.
Name Range KPI_01=OFFSET(Date,0,1) KPI_02=OFFSET(Date,0,2) KPI_03=OFFSET(Date,0,3) KPI_04=OFFSET(Date,0,4) KPI_05=OFFSET(Date,0,5) KPI_06=OFFSET(Date,0,6) KPI_07=OFFSET(Date,0,7) KPI_08=OFFSET(Date,0,8) KPI_09=OFFSET(Date,0,9) KPI_10=OFFSET(Date,0,10)
I have tried the following code which works to an extent...
Range("=OFFSET(Date,0,1)").Name = "KPI_01"
..but the final result of the named range is an actual range, i.e. "A1:A13".
How can I keep the named range as a dynamic range?
I have two sheets. One called "Roster" and one called "final". On the final sheet i have cols for each question on the final exam. I also have a total col which sums up the pts for each question.
On the "roster" sheet. This is kinda like a summary sheet. On this sheet i use a vlookup (shown below) in the cells which are supposed to reference the cells on the "final" sheet for the total pts.
I have two columns E, F in excel. Rows are dynamic. In the sense that sometimes only 2 rows appear or sometimes newer rows appear......
Now I want to lookup the last row and get the required numeric value. I have written the following formula to get the result. =VLOOKUP(CONCATENATE("E",SUM(COUNTA(E2:E16),1)),E2:F16,2). It returns value 60. But when I add 2 new rows.
7 F 70 8 J 90
It should return 90. But it is still showing up 60. when i checked CONCATENATE("E",SUM(COUNTA(E2:E16),1)). it is returning 'E8' correctly. But VLOOKUP unable to return correct value.
I have a master data sheet with four columns, A, B, C and D
Column A has the primary data and B,C,D has dependent data values;
So when I insert a new cell in Column A with cells Shift Down, I want mandatorily new cells to be inserted in the same row in col B, C and D as well so that data integrity is maintained;
how I can get the userform to close when another worksheet is selected. what I really need is for the userform to just show on one worksheet (not close) Is that possible? If not I want to be able to re-size the userform when another worksheet is selected (like getting it to minimise)
I am trying to do is extract the volume size of products in 'ml' from 10k plus products from a description field cell. this description field could also contain the weight of the product in grams so I cannot just do a search for a numeric string , it has to be associated with the milli-litres statement .
is is possible to do a sort of ' *ml ' search and then select and copy to another cell ???
I have the following issue. I have a file, which contains about 7 000 columns, each with 8000 rows, mostly filled with numbers (with decimals). But sometimes, numbers will be replaced by "N/A" where a value was not available. What I want to do, is delete columns, where all the rows are just "N/A" to reduce the size my file.
I want to be able to sort the columns in a worksheet based on their cell values, eg. column of text sorts A to Z and column of numbers sorts largest to smallest. Cells are formatted as General, number or currency but the sort button only offers A to Z or Z to A.
I recorded a macro to perform a graphing operation which will be used in a For-Next Loop which will run eight times. I need to modify the “ range” portion of one of the recorded lines to allow the graphing data to be dependent on variables I have set up as integers. See the applicable part of the recorded code below.
Dim firstrowno As Integer Dim ltcol As Integer Dim lastrowno As Integer Dim rtcol As Integer
‘code which sets the values of the above variables Is Not shown
How do I select or highlight cells from row 1 through row x (a numeric variable) in column A? I'm eventually hoping to shift those cells in column A (from row 1 to x) to the right by one.
In cell A1 I have a countdown timer from an external source that counts down to 00:00:00 approximately every 10 minutes and then resets.
I need a macro to be triggered whenever 00:00:00 is reached.
The macro will select column AL and copy a range of cells (within AL) that contain numeric values only and paste these numeric values in the adjacent cells in column AM. It is important that the paste is values only and not formatting or formulas.
Column is being fed dynamic data from an external source and displays either #N/A or numeric values.
I am using the following vba code to find numeric codes in a column and replace them with the same code along with descriptive text:
Range("Q:Q").Select Selection.Replace What:="11", Replacement:="11 - GSA" Selection.Replace What:="10", Replacement:="10 - NYS OGS" Selection.Replace What:="1", Replacement:=" 1 - Dist Sale" Selection.Replace What:="2", Replacement:=" 2 - Direct Sale" Selection.Replace What:="3", Replacement:=" 3 - No Sale: Warranty Exchange" The problem as you might already see is that when the replacement of "1" happens, Excel will replace the 1 in the 10 and 11. Of course I want to only replace the number 1. Is there a better way to code this operation?
I have a column of about 13,000 10 digit numbers. I need to add four zero to the beginning of each row of numbers so I can make it 14 digit numbers. Is there a way to do this without cutting and pasting four zero's for each row of numbers.
Call LastCell_Example(LastCell) lastrow = Cells(Rows.Count, "B").End(xlUp).row Set Datarange = ActiveSheet.Range("B1:" & LastCell) ' Set to 0 all cells that contain constants, but ONLY those that are numeric Datarange.SpecialCells(xlCellTypeConstants, xlNumbers) = 0
lastcell_example contains
Dim rng As Range
' Use all cells on the sheet Set rng = Sheets("Courtage").Cells
' Find the last cell LastCell = Last(3, rng)
' Select from A1 till the last cell in Rng With rng.Parent .Select .Range("A1", LastCell).Select End With
When I run the code above, I don't understand the fact that the first rows in the sheet AFTER "Courtage" are also being changed to zero.
Obviously, I'm not limiting my datarange correctly, but could someone explain what I need to do to limit the changed data to ONLY the current sheet.
The attached picture shows part of an excel file. It contains about 50.000 rows which I want to run a pivot on. The problem is though that the file contains some rows which stop my pivot from running correctly. These data which I mention are in rows 4, 7, 22-25. Seeing as deleting them manually would take me hours and hours I was wondering if there would be a macro which I can run which delete rows automatically. I think it should filter on the following: whenever there is not a numeric value in column A, the entire row should be deleted.
I am trying to retrieve data from another file using the VLOOKUP function however this is only to happen depending on if any of the 3 items of data appear in column 8(H)
OLY OLY - QUO OLY - PRO
I have the following and know this is not correct
Sub BlockAllocationsVlookupAll() Dim x As Long For x = 1 To 65536 If InStr(1, Sheet1.Range("$H$" & x), "OLY") > 0 Then Sheet1.Range("$I$" & x) = Sheet1.Range("$I$" & x) & "sometext" End If Next End Sub
I know the above doesn't do exactly what needs to be edited to include the Vlookup below
I would like a flexible Formula to Return the Column Number of individual Numeric Labels and their Numeric Value. I have a 2-Row by many Columns chart/ grid layout. My 1st Column, Column Number "1" is Excel Column Letter "F".
Numeric Label 17 is housed in Column Number "12" per my chart , its Numeric Value 5 is housed on the next Row - directly below the Numeric Label.
Sample Data: ...
Scenario:
To Return the correct Column Number: locate the Numeric Label 17 and its Numeric Value on the Row below, Numeric Value is 5. The Numeric Value is to be increased by a Value of 1 (one) - NEW Numeric Value = 6. The Column Number Returned should reflect Numeric Label of 17 remains the same but the Numeric Value is increased by one.
To Return a Column Number representing the Numeric Label 17 and its original Numeric Value +1 (plus one): the Numeric Label is still 17 but the Numeric Value is NOW 6. From the oringal Column Number that housed Numeric Label 17, that is Column Number "12", SEARCH in Ascending order: moving LEFT from Column Number "12" and using the Numeric Value as the 1st (first) search order and the Numeric Label as the 2nd (second) Ascending search order. SEARCH the Numeric Value Row until the first Numeric Value either equal to 6 or more than 6 is found. Then Return the Column Number of the Column to the Right of that Numeric Value.
Required Result:
Return the Column Number based on the Numeric Label 17 and the NEW Numeric Value of 6, search in Ascending order - First search order based on Numeric Value 6 - Second search order based on Numeric Label 17.
Using a Dynamic Named Range "Data", I would like a Formula to return the Row Number of the "LAST" instance of a duplicate numeric value - repeating twice consecutively in the same column.
I would like the word 'Results' to display in BLACK text because the mean score is in the range 3.0-3.9 (same goes for the word 'Morale'). I would like the word 'Buy-In' to disply in GREEN text because the mean score is in the range 4.0-5.0. Basically, the mean scores are calculated using formulas and I would like the color of the category to change based on the mean score number. Is there a way to use conditional formatting to do this? Or another way to automatically make this work? File is attached.
In my spreadsheet, each row of data in Column B starts with 3 numerics (e.g. 001) followed by some text. For example:
Cell B2 contains '001 - Text for this cell'
Cell B3 contains '002 - Different Text for this cell',
Cell B4 contains '003 - Different Text for this cell', etc.
I have hundreds of rows which follow this format.
I have had to insert several rows in my spreadsheet in between existing rows which has thrown off the numbering in the first three positions of my Column B cells.
Is there any way to update the data in Column B so the text data in each cell is retained but the first 3 numeric values are updated and again sequential?
I would like to total numeric amounts based text in another column.
For example, I have a bunch of rows in "column F" with the same text (company name) and in "column I" i have numerics. Is there a way to total "column I" based on the same text of "column F"?
In the sample i have list of codes,also i have picture according this codes: Can i somehow conected pictures and codes? My pictures are in jpg form,can i insert them into cell,where picture should has form as cell has.
When the code from the Data sheet in cell A2 sheet 1,than show the picture conected with this code in Data sheet.
On sheet1, I want to insert a Vlookup formula that will look in the other two sheets and will return a value (say the variable Y) if two lookup values are met and return a blank if they are not met.
Example. Sheet1. CellA1 = apple CellB1 = 2. I want to search Sheet2 and Sheet3 row by row and if Sheet2 has A and B cells which correspond(a row with "apple" in column A and "2" in column B, return the value Y. If not, return blank. Sheet2 and Sheet3 will never have duplicate values (and if they did, returning a Y would be fine).
I have a column of several thousand entries listed as numeric with a scientific symbol eg.
1.4mSv 19.53mSv/1mSv (some have a mix and or alpha/numeric range)
I want to convert them to the numeric value only. I'm extracting to a chart which is not recognising the alpha and throwing the data out. I tried find and replace, trying various options within the 'replace format' tab with no joy.
I have a few thousand products codes (i.e ABCD123BLA08 or SHU267BLA) They are non standardised in length or structure. I wish to pull out everything upto the end of the third numeric digit.( ie ABCD123 and SHU267) I cannot use left as they are all different lengths. Ideally i would serach for a non numeric char after the number then use left up to that point. Search can't do this, FIND can't do this.
Summary ABCD123BLA08 would be ABCD123 SHU246BLU would be SHU246 I147ORT08-12 would be I147
I have sent a data sheet template to my client in which they paste their data, based on this data sheet analysis will be done automatically in next sheet "Summary".
Whenever they paste product code, vlookup is not working since the product code contains few are numeric (shows: "Number Stored as Text"). I advised my client to go with "Text to Column" and "Delimited" to change it as numeric. But my client feels this method is tedious one. Is there any alternate way to make that column as numeric permanently?