Warning Message Needed For User Who (X) Out Of Certain Form
Oct 31, 2012
I am attempting to have a pop message display when users of a certain form "X" out of the form. Below is what I came up with but it does not seem to be working:
Code:
Private Sub IntroUpdate_BeforeClose(Cancel As Boolean)
Call MsgBox("User closed the program before any formulas were updated.", vbExclamation, ".: ALERT: FM Program Tabs :.")
End Sub
Currently the above is in the code section of the form (titled: IntroUpdate).
Also if the form unloads I do not want the message displayed - only in the event that a user "X" out of the specific form titled: IntroUpdate).
View 2 Replies
ADVERTISEMENT
Jun 24, 2009
If cell K6= "ERROR" I need a message to pop up on screen with the message "Wrong Entry click OKAY to find, Click CANCEL to ignore". Clicking OKAY would simply go to worksheet named "MONITOR". Clicking Cancel would just clear the pop up from on screen.
View 5 Replies
View Related
May 28, 2007
I have a lot of links on my excel page, links going to videos. Everytime I click the link, I have this message :
"there might be viruses... are you sure you want to open this file?"
I know there must be a way to take this message off : I worked with it for months, and then it suddenly disappeared. But now that I formatted, it's back again
View 9 Replies
View Related
Mar 3, 2009
I have an excel sheet there i am maintaining the details of our sales invoices. Invoice no is in the column D . My concern is while entering a new number in the column D, excel should look at the entire column and give an error message if the no is already exixting in the column.
View 9 Replies
View Related
Apr 2, 2009
I have a range of cells and I would like a warning message to pop up if a value over 0.1 is entered. I'm sure it is pretty easy to do, just can't find any info on here and I'm not great with Excel.
View 2 Replies
View Related
Oct 15, 2009
I have this problem: I have a workbook with a formula liniking to another workbook. When I open the workbook, I click on "update links" and then I get this warning message:
"The workbook contains one or more (than one) links that cannot be updated.
* To modify the origin of links, or to look up to update the values again, choose Modify links
* To open the workbook as it is currently , choose To Continue"
I cannot understand where is the problem, the link is updated, state of link is "ok", I even can open the origin from Modifiy menu --> link --> open origin
View 2 Replies
View Related
Apr 3, 2009
Everytime I open the excel file I am working on I get a message saying that the file contains macros.
I have deleted all the macros I could find under "Tools" and "Macros" but I still get Module1.sortie, sortie and sortie listed. I can delete Module1.sortie but for the other two, sortie and sortie, I only have the "cancel" and "create" options.
View 14 Replies
View Related
Sep 21, 2009
We are using Excel 2007. The person I'm trying to help has a column with dollar figures format as Number with the obvious two decimal places. If we go to Home>Find&Select>Find and type in the value EXACTLY as it appears with Look in: changed to Values, it finds all instances of the value just fine.
Now, if I flip over to the Replace tab because she wants this specific dollar figure replaced with another specific dollar figure, my only option under Look in: is Formulas, so trying to perform the replace gets me a warning message that "Microsoft Office Excel cannot find a match".
View 9 Replies
View Related
Aug 15, 2006
I am writing a roster spreadsheet and it has cells with drop down lists using validation lists to fill in the start and finish times, as we run a nearly 24 hour business it is possible to accidently start someone at 2.00am and finish them at 10.00pm. In the cell which calculates the time rostered I want it to display a messagebox if the hours exceed 10 hours or go into negative.
I need to "wife proof" this sheet as this stuffs up the total calculated hours and total costs.
Would I do this through validation on the cell with the formula calculating the times orr though a macro on the sheet module?
View 3 Replies
View Related
Aug 15, 2006
I have a macro here that turns exported text into delimited text, but it keeps prompting the user "Do you want to replace the cells"...can I somehow automatically bypass this prompt and always say yes?
View 2 Replies
View Related
Apr 17, 2007
When I use list validation with name (Data validation List. Inseret name difine) and then trying to write manualy a differnt value (not from the relevant list) I am not being warned like I get when I choose a list . And then even when I have a list or a Name If I copy a diffrent value I am not being warned.
View 9 Replies
View Related
Oct 3, 2013
I have several workbooks that use macros from my personal macro library (MyExcelAddIns.xlam).
Some of these, especially new ones, get an error message every time I save them: "Privacy warning: This document contains macros, ActiveX controls, ... These may contain information that cannot be removed by the Document Inspector."
Then after I save it once or twice, the message goes away. Why am I getting this message? Why only sometimes? What can I do to get rid of it entirely?
View 3 Replies
View Related
Jun 24, 2014
I want when Mold Capacity is more than available. i.e only Show warning Message to user
View 3 Replies
View Related
Jul 8, 2014
I want open particular sheet in a workbook after showing warning Message .
View 5 Replies
View Related
Sep 5, 2007
I am looking for a macro that will find identical adjacent cells and merge them automatically without the standard warning prompt (of only retaining the data in the upper left cell). In the following attached example, on the worksheet 'Control', the button 'Automerge' should find all the identical cell groupings in the entire table and merge them immediately without a warning.
View 3 Replies
View Related
Dec 15, 2011
I want to display a warning pop up message when the following cells (Cell A1:A10) is greater and equal to 3.
I would like some code in VBA
View 6 Replies
View Related
Feb 23, 2013
I want to change the format, design & background color of the POPUP Message.
How to Change format of warning / message / popup window which appear after giving the data validation or Macro criteria.
View 1 Replies
View Related
May 27, 2014
I am using Windows 7 and have a piece of code that brings up a warning message after 20 minutes to warn the user they have been in a workbook for too long.
If they have the Excel application window minimized, is there a way to get Excel to take the application out of minimized mode into max screen, before revealing the message.
Currently when the warning message activates, the excel icon just flashes in the start bar. Some users may not see this.
Here is the code I have so far:
[Code] ....
I have already tried simply adding a piece of code with maximize screen, however this doesn't seem to work.
View 2 Replies
View Related
Aug 23, 2007
I want to have a warning message appear when a particular cell function result is a specific number, probably very simple to achieve.
View 9 Replies
View Related
Sep 10, 2009
I have a couple spreadsheet Excel 2003 that I have to Email, I use a few macros with these spreadsheets. The Macros are kept in my personal workbook. When I Email these sheets does the end user see the warning enable macros or do they just see the sheet as is. I am mailing the whole workbook but macros are in my personal workbook. If they see the warning is it possible for me to Email so they will not have to contend with that?
View 3 Replies
View Related
Aug 13, 2007
When I delete a worksheet, via code, a warning pops up telling the user that a data is subject to deletion.
View 9 Replies
View Related
Jun 3, 2006
find the attached workbook
I have a Database and user form, in the user form i have a field named “Vehicle No” this is a combo box from which a user needs to select the Vehicle numbers, and all these are working fine now, I need your help in the following:
When user selects the second field named "Select Vendor name" i need a pop up window which shows all the Vehicles belongs to the vendor which they have selected, and with the popup window user selects the vehicle number then the Vehicle number combo box should be filled.
Currently users have to select by scrolling through Combo box which takes long time and difficult to find by scrolling.
View 7 Replies
View Related
Feb 9, 2010
I have a user form that has a combo box "City" two text boxes one called "Flight" and the other "Date". What I'm trying to do is to prevent the user from saving the data input from the user form if any of those three fields is left blank. The code that I have so far checks all of the required fields, if any are left blank a message notifys which field(s) is left blank and return the focus back to that field. But the rest of code also fires.
What I really need is either to stop the code if any fields are blank and return the focus back to the blank field, the user completes the field(s) and clicks the save again, or better yet, pause the code until all the required fields are completed and then complete the save. (There is actually another 200+ lines of code in this sub, but I deleted it to keep the post a little shorter.)
View 2 Replies
View Related
Jan 14, 2009
I have created a registration workbook for this year's youth sports league. All of the information is entered into a User Form and separated onto it's appropriate sheet designated by the child's age. Next year, I would like to use this year's workbook to look up returning players.
Will it be possible to add a "lookup" button into my form, or create a lookup program, that once the registrar clicks on the correct player, the information is plugged into the User Form, the registrar adjusts the age and any necessary info, presses enter, and the information is copied into the appropriate category in the new workbook? I haven't worked with User Forms long enough to know if they can be filled in that way, but if this can be done, you are the people who would know.
View 3 Replies
View Related
Dec 2, 2008
I'm using a series of user forms for data entry to a workbook, some of them open next stage user form on completion (OK cmd button).
All that is working fine, but I'd like the initial form to close on showing the next one. I've tried adding Unload and Hide commands following the frmInsertEntry.Show (Next stage form), to no avail, but I'd like this user form to close or hide at the end of the sub.
Private Sub cmdContinueType_Click()
ActiveWorkbook.Sheets("Records").Activate 'Select starting cell in record sheet
Range("N3").Select
Do
If IsEmpty(ActiveCell) = False Then ' Search for next empty cell
ActiveCell.Offset(1, 0).Select
End If
Loop Until IsEmpty(ActiveCell) = True
If optDrillType = True Then
frmDrillEntry.Show
Else
frmInsertEntry.Show
End If
End Sub
View 9 Replies
View Related
Jan 12, 2010
I have been using the GetOpenFileName method and a message box to return the filepath of a file and saving the filepath in a variable called Filepath. This worked just fine.
What I want to be able to do is display the the file path at any time in a message box, but not sure how to do this. I tried displaying the message box in a form and was going to look for some way to call the form, but the form does not return the message.
My code for this is as follows:
Module 1
Sub getfilepath()
Dim filepath As String
filepath = Application.GetOpenFilename(FileFilter:="All Files (*.*), *.*", Title:="Select a file")
UserForm1.Show
End Sub
Userform 1
Private Sub OkButton_Click()
Unload UserForm1
End Sub...........
View 9 Replies
View Related
Aug 21, 2008
Is it possible to have a message box show only for a specific user when a spreadsheet is opened? I have a spreadsheet that multiple people use, but only a few edit. I only want the message box to show for those that edit the form.
View 14 Replies
View Related
Jun 10, 2006
I've got the below code which I use to log users who opens my spreadsheet. It's a Event so runs when the spreadsheet is open with macro enabled. The spreadsheet is on a shared drive which has the prefix "K". Most users it works find but one user gets a error Message "Path or Drive" error. I got around it by adding "on error" but how do you overcome issues with drive prefixs and the drive address e.g "K" vs "\CRD2000"
Private Sub Workbook_Open()
Open ThisWorkbook.Path & "usage.log" For Append As #1
Print #1, Application.UserName, Now
Close #1
End Sub
View 4 Replies
View Related
Oct 25, 2007
I have a spreadsheet with the following headings:
A
Claims Number
B
Name
C
Scheme
D
Admin
E
Date
I need to create a user form that will "pop up" and ask the administrator to enter the above details.
A - should be created automatically (ie last claim number + 1)
B - user enters manually
C - data retrieved from a list
D - data retrieved from a list
E - date is the date the information is entered
View 9 Replies
View Related
Mar 21, 2008
I want to inform my users via a message box if they have not entered the previous month's information. The months are populated via a User form using a combo box selection. The months start from April through to March and are entered into the worksheet range ("aa3").
Data is entered monthly by the team. I don't know how to begin with this. I've managed to inform them when they've already entered that months information, but I don't know where to begin with this.
View 9 Replies
View Related
