How To Display Warning Pop Up Message When Cells Is Greater And Equal To 3
Dec 15, 2011I want to display a warning pop up message when the following cells (Cell A1:A10) is greater and equal to 3.
I would like some code in VBA
I want to display a warning pop up message when the following cells (Cell A1:A10) is greater and equal to 3.
I would like some code in VBA
I am looking for a macro that will find identical adjacent cells and merge them automatically without the standard warning prompt (of only retaining the data in the upper left cell). In the following attached example, on the worksheet 'Control', the button 'Automerge' should find all the identical cell groupings in the entire table and merge them immediately without a warning.
View 3 Replies View RelatedNeed a formula for counting how many consecutive cells where the value is gretaer than or equal to +1
For example 1,
J18 = 7
K18 = 9
L18 = 3
M18 = 2
N18 = 8
O18 = 1
P18 = 8
Q18 = -17
In the above example the result would be 7
Example 2:
J12 = -22
K12 = 9
L12 = 4
In the above example the result would be 0 since the 1st value was -22
I am using cell V7 to input the formula but I want cell V7 to tell me if the number in U7 is greater than or equal to the individual #'s in cells U7-U40 and I would like it to put a 1,2,3 in the cells of V7-V40 for the three highest numbers in order of largest to smallest if is this possible?
View 3 Replies View RelatedI'd like all Cells in column AC (e.g. AC$3$:AC$517$) to be filled with yellow fill if the cell value is any date greater than or equal to today. Any past dates can be left blank (for now)
=$AC3>=TODAY()
I have a lot of links on my excel page, links going to videos. Everytime I click the link, I have this message :
"there might be viruses... are you sure you want to open this file?"
I know there must be a way to take this message off : I worked with it for months, and then it suddenly disappeared. But now that I formatted, it's back again
I have an excel sheet there i am maintaining the details of our sales invoices. Invoice no is in the column D . My concern is while entering a new number in the column D, excel should look at the entire column and give an error message if the no is already exixting in the column.
View 9 Replies View RelatedI have a range of cells and I would like a warning message to pop up if a value over 0.1 is entered. I'm sure it is pretty easy to do, just can't find any info on here and I'm not great with Excel.
View 2 Replies View RelatedI have this problem: I have a workbook with a formula liniking to another workbook. When I open the workbook, I click on "update links" and then I get this warning message:
"The workbook contains one or more (than one) links that cannot be updated.
* To modify the origin of links, or to look up to update the values again, choose Modify links
* To open the workbook as it is currently , choose To Continue"
I cannot understand where is the problem, the link is updated, state of link is "ok", I even can open the origin from Modifiy menu --> link --> open origin
Everytime I open the excel file I am working on I get a message saying that the file contains macros.
I have deleted all the macros I could find under "Tools" and "Macros" but I still get Module1.sortie, sortie and sortie listed. I can delete Module1.sortie but for the other two, sortie and sortie, I only have the "cancel" and "create" options.
We are using Excel 2007. The person I'm trying to help has a column with dollar figures format as Number with the obvious two decimal places. If we go to Home>Find&Select>Find and type in the value EXACTLY as it appears with Look in: changed to Values, it finds all instances of the value just fine.
Now, if I flip over to the Replace tab because she wants this specific dollar figure replaced with another specific dollar figure, my only option under Look in: is Formulas, so trying to perform the replace gets me a warning message that "Microsoft Office Excel cannot find a match".
I am writing a roster spreadsheet and it has cells with drop down lists using validation lists to fill in the start and finish times, as we run a nearly 24 hour business it is possible to accidently start someone at 2.00am and finish them at 10.00pm. In the cell which calculates the time rostered I want it to display a messagebox if the hours exceed 10 hours or go into negative.
I need to "wife proof" this sheet as this stuffs up the total calculated hours and total costs.
Would I do this through validation on the cell with the formula calculating the times orr though a macro on the sheet module?
I have a macro here that turns exported text into delimited text, but it keeps prompting the user "Do you want to replace the cells"...can I somehow automatically bypass this prompt and always say yes?
View 2 Replies View RelatedWhen I use list validation with name (Data validation List. Inseret name difine) and then trying to write manualy a differnt value (not from the relevant list) I am not being warned like I get when I choose a list . And then even when I have a list or a Name If I copy a diffrent value I am not being warned.
I am using the following code to display a range of cells from a single column (A1:A10) in a message box, with each cell value on a seperate line.
View 7 Replies View RelatedCan I display the contents of a range of cells in a message box?
View 4 Replies View RelatedI am attempting to have a pop message display when users of a certain form "X" out of the form. Below is what I came up with but it does not seem to be working:
Code:
Private Sub IntroUpdate_BeforeClose(Cancel As Boolean)
Call MsgBox("User closed the program before any formulas were updated.", vbExclamation, ".: ALERT: FM Program Tabs :.")
End Sub
Currently the above is in the code section of the form (titled: IntroUpdate).
Also if the form unloads I do not want the message displayed - only in the event that a user "X" out of the specific form titled: IntroUpdate).
I have several workbooks that use macros from my personal macro library (MyExcelAddIns.xlam).
Some of these, especially new ones, get an error message every time I save them: "Privacy warning: This document contains macros, ActiveX controls, ... These may contain information that cannot be removed by the Document Inspector."
Then after I save it once or twice, the message goes away. Why am I getting this message? Why only sometimes? What can I do to get rid of it entirely?
I want when Mold Capacity is more than available. i.e only Show warning Message to user
View 3 Replies View RelatedI want open particular sheet in a workbook after showing warning Message .
View 5 Replies View RelatedI want to change the format, design & background color of the POPUP Message.
How to Change format of warning / message / popup window which appear after giving the data validation or Macro criteria.
I am using Windows 7 and have a piece of code that brings up a warning message after 20 minutes to warn the user they have been in a workbook for too long.
If they have the Excel application window minimized, is there a way to get Excel to take the application out of minimized mode into max screen, before revealing the message.
Currently when the warning message activates, the excel icon just flashes in the start bar. Some users may not see this.
Here is the code I have so far:
[Code] ....
I have already tried simply adding a piece of code with maximize screen, however this doesn't seem to work.
I want to have a warning message appear when a particular cell function result is a specific number, probably very simple to achieve.
View 9 Replies View RelatedI have a work book with several (couple of hundred) buttons, which when clicked display the contents of a range of cells in a message box as shown below;
View 4 Replies View RelatedI have a cell, M87. The score in M87 can be less than 13 or greater than 25. I need a formula within M94 which refers to M87, and outputs depending on the the following criteria. If M87 is less than 13 then output as D. If M87 is 14, 15, 16, or 17 then output as C. If M87 is 18, 19, 20, 21, 22, 23 or 24 then output as B. If M87 is greater than 24 then output as A.
View 3 Replies View RelatedIf A7 is equal to and greater than 95% than B7 is equal to "A". If A7 is equal to 91% but less than 94.99% than B7 is equal to "B"...
View 4 Replies View RelatedI'm trying to sum all values greater than 5,000,00 and less than or equal to 10,000,000. I have this formula:
Code:
=SUMIFS(B6:B1359,B6:B1359,">"&L2,B6:B1359,"=
I am looking for a function like MATCH if the match type were set to -1. However my data is sorted in ascending order. I am mining data from a Pivot Table, and it has dates across the top. Of course the pivot table will have the data sorted in ascending order from left to right. I want to find the first date that is greater than today. With weekends and holidays I can't just use TODAY()+1. Is there a function that can do what I am asking? Also I do not want to change the pivot table itself.
View 9 Replies View RelatedI need a formula that looks at the total in H40 and if the number is between 32 and 40 I need it to return the number then if the number exceds forty I need to multiply the overage by 1.5 and add it to the 8 for a total of 11.
I think it would be something like:
SUMIf(H40>"32",
I am creating my first Userform and having some problems. I take the data supplied by the userform and try to match it as closely as possible to a row of information. Currently I am using four cells to autofilter my spreadsheet data. Two of the cells I am looking for a exact match. The other two cells I am looking for the number that has been input or anything greater than it. Here is the code I have come up with...
View 9 Replies View Related