Loop Formula To Search Through Range To Get Expected Output?
Feb 14, 2014
Trying to look for formula for searching through Range and search through Data to achieve expected res
Data Output ExpectedRange
Pune 123 is city Pune 123 Mumbai 999
Maharashtra 345 is state Maharashtra 345Pune 123
India 678 is Country India 678 Nagpur 666
Maharashtra 666 is state OthersPune 555
Below is the query i used for manual search however need formula to see through Range and achieve output expected
I have a system that generates 4 databases with different types of statistical data. Observed defects, Calculated Defect, Capability and Number of points. I have set up a system for telling me what ranges each section is and I am manually changing the ranges to get my expected results.
Is there a formula that I can use that could adjust my ranges, within my formulas?
I need to replace "G542" in the formula above. For example, in cell J541 shown above, I need it to output "1996-1999|2000-2001" instead of "1996-2001" I need the output to include LEFT(G541,4)&"*"&RIGHT(G541,4)
using Excel 2007. I need a code to identify a worksheet within a workbook by cell/range value. The book is used by various users. They have the rights to add new sheets and all but delete columns in the 'master worksheet'. The sheet names can be changed by the user but I need to rename the master sheet on opening the file. To do this I have put a specific value in a cell within the master worksheet which then should allow me to find the sheet and rename it. (let say Range A1 has a value of "this sheet") I have a mental block on how i can run a loop to search each sheet for the identifying value until the range and value is found and the sheet identified
Here's what I'm trying to do hopefully you can help me.
1) Given value in Sheet 1: Column A, search for that value in Sheet 2: Columns A:C. Then output the value in Sheet 2: Column D of the same row, to Sheet 1: Column B
2) Same setup as above, but the same given value is found multiple times, then have say 1st value output to column B, second to C, third to D, and so on.
I have a spreadsheet (called “output”) with a single list of unique account numbers in column A. In columns B, C, D (column B = Invoice, column C = Sales, column D = class), I need to add information from a data file based upon certain search criteria which is as follows:
For each account number I need to list an invoice number and the corresponding sales amount and class. I need to list the invoice with the “highest” sales amount. There is only one catch to the issue I am encountering and this is I need to first look for the highest amount in Class A sales, if no Class A sales, then look for the highest in Class B sales….and then Class C….and then Class D. If there are no sales in Class A, B, C, or D, then return a value of “no match found”.
My sheet called 'Report' finds a type using a vlookup. I then have a sheet called labor, where I want to find put the total amount for labor using this formula: '=SUMIF(Report!$K$2:$K$65000;LABOUR;Report!$G$2:$G$65000)', but it only returns a '-'. I want the formula to return total amount from column G, if column K is type 'LABOUR'. Is my formula incorrect?
I have developed a user form in VBA which is used for entry into an excel worksheet. From this data, I need to do the following:
1) Create 2 output files for Job data entitled "J" and another file entitled "S". The "J" and "S" is captured in a field in the data. I need to hit a button that allows these 2 output files to be produced, so I need to 'loop' through rows of the data to do this/
2) In addition to 1), the user needs to be able to 'select' the date range they would like to see 'J' and 'S' data over. This will be based on a field called "Startdate'. How could I do this with the button above-can I parse an input value to a form and select the 'J' and 'S' files on this.
Image column A, starting at A2 to LASTROW of say 10, I have the LASTROW value stored in a variable.
Each cell in the range contains a file location/document name, example:
C:Documents and Settingsuser-idDesktopDOCSDoc01.xls < cell A2
this repeats for A3, A4, to A10, for each different document.
So starting at LASTROW + 3, I've created a new Header for Hyperlinks: and below that I want to create the 10 hyperlinks for each of the 10 documents above.
formula is =hyperlink(a2,a2) and then (a3,a3) and so on...
I have data from (row 1, column 1) to (row 53, column 5) on 283 consecutive worksheets in a singular excel file that I would like to be presented on a singular worksheet starting from the data on worksheet 1 and descending to the data on worksheet 283.
I am looking for a copy and paste loop solution that will copy the data from each page and sequentially paste the results on a singular output page in descending order (worksheet 1 data, worksheet 2 data... etc) so that I can sort the data.
I'm trying to create a formula that will search for a specific text in "sheet1" within a date range and then SUM the total on "sheet2". I've manage to use the SUMPRODUCT (below) formula but want to expand on this so the SUM can be shown on another sheet(summary page). =SUMPRODUCT((ISNUMBER(FIND({"nmlclex06"},A1:A10)))*(B1:B10)) In this example I search for the text "nmlclex06" and SUM the size, but don't have a date range and don't know how to SUM the data on another sheet.
I need a macro, or a formula that can identify if the words in the Words Column (Column A) is contained in Title Column (Column B). If it is, It displays as "Yes". If not, display as "No".
I've got a code that stores a variable and then searches for that variable in a different file. When it finds the answer it it jumps over and up and highlights a different cell. The problem now is that I want it to keep searching past where the first result was and repeat this process down the entire column. Here's what I have so far:
Code: Sub Find() ' ' Find Macro ' Finds a specific key word or phrase from the search box and codes the matches green. MsgBox "This may take a moment, please be patient." ' This next line establishes the fact that the function will use a variable. Dim FindClass As String On Error GoTo ErrorCatch
I'm trying to output a couple columns (and 300 rows) to a csv file. This code works wonderfully, save for the fact that it doesn't igore any cells in the range that are empty.
I am trying to use a code to run a loop and search in column B for a certain name and if it finds it I want it to then look at column P and if it finds that the result in column B is less than $1000 then I want it to cut the entire row and paste the row in another sheet. Here is the code.
I'm trying to create a function that will search for a certain value and if that true, delete certain cells in the same row. So far, I've come with the following and not sure how to write particular line.
So this function will go through column G and count the rows since it could have 1 or 50,000. So for example if column G2 has a value anything other then "Pending" then I need cell T2:Z2 to be deleted.
I know this line is the source of error Rng("T & Rows.Count:Z & Rows.Count").Select but I don't know how to express it.
Sub Check_Status() Dim iLastRow As Integer Dim Rng As Range iLastRow = Cells(Rows.Count, "G").End(xlUp).Row For Each Rng In Range("G1:G" & iLastRow) If Not Rng.Value = "Pending" Then Rng("T & Rows.Count:Z & Rows.Count").Select Selection.ClearContents End If Next
I would like to output the text I perpared in " sheet 1" into a text file, "output.txt"
The imformation I like to output start from coulmn C, and column D then column E..... The numbers of rows in each column could be different, and also there may be some single empty column in between. The totals numbers of coulmn is unknow.
the text in the output.txt should contant all the imformation in the sheet started from column C, coulmn D, column F.... (if coulmn E is empty). and the text in the output.txt file is continues with no gap in it.
To make it even more powerful for later use, The column that begin with NOT should not be output.
I have various spreadsheets that get into infinite loops sometimes when I search for things. Hitting break breaks it, and the search window (find all) shows the same exact entry hundreds of times.
I am trying to get a list of states, based on their expiration date.
I have all 51 states listed, some states have 2, 3 or more licenses, so I created a column that I hid of the state abbreviation, for the use of formulas.
If the license expires in 30 days or less I want to display the state abbreviation. I couldnt figure out how to do an array output, so this is what I am trying to come up with.
I am looking for a formula that will output the highest and lowest value in a range. Column A contains a range of numbers, some of which repeat and in column B i'd like to extract ONE instance of the highest and lowest value in Column A, preferable the last instance.
See example below and in column B the desired output.
I want to pass an array to a function, and am unclear how to do it. For example, the following declaration does not work:
Public Function xyz(a() as Variant) as Double
There is an additional requirement that I would like the output also to be a range of the same dimensions, typically one column and 100 rows. Is this possible?
A further twist is that the function I am writing calculates two values for every element in the input array and I need the output of them both.
An inelegant solution would be to write two separate functions, but I was wondering if it is possible to get two array outputs from a single function.
In column A i am using the following formula to output "Our Apple" when "Apple" is in column D and "Our Banana" when "Banana" is in column E:
[Code] .....
I would like the formula to also output "Big Apple" immediately underneath "Our Apple" when its present, and output "Big Banana" immediately below "Our Banana" when it is present.
The yellow column is how column A should look after the formula edit.
I have a fomula field in row 67 and 68 .Row 67 calculates the average and row 68 calculates the improvement i.e. average(row 68)- last row inserted(row 67). The values for improvements are not showing correct value. C68 seems to give correct value but B68 and D68 is giving wrong value.
B68=4.8-4.5 =0.3 but it shows 0.4 C68=14.9-15.1=-0.2 D68=11.3-10.2=1.1 but it shows 1.0
I'm using "Mangal" Hindi font for entering the data but I'm not getting Hindi numbers in the output by formula. The output is in English numbers which I want in Hindi numbers. The marks are in Hindi numbers but the output is in English numbers.
I have a column A with date formatted as dd/mm/yyyy. I then have a column B which is =A, and I reformat the date formats to a custom format DDDD which gives me the day of the week that the date relates to.
I then try and write an if statement
e.g. =If(b1="Friday",1,0)
B1 always references the date which is stored as 40118, when I need it to reference the actual formatted value that I see in the cell e.g. Friday?
