I would like to do the following:
The current value in A1 is 10, now add 10 to that to get 20 but accomplish it all in cell A1.
Is this possible either as a function or code.
I have not found the answer anywhere else.
I have a report which has a list of customers, each customer has 24 columns which represent the payment history over 24 months. If a payment has been made for that month the date and time (formatted correctly) will be populated in this cell.
Each customer has a product name attached to it so a product can appear several times. I need is a formula that shows the total payments recieved for a particular month for a particular product. For example.
I have managed to create the following flag which works a treat, it picks up a date an account was set up but looks at 1 column.
This may not be the best way to do this, but I don't know Macros or Pivot Tables.
I am looking for a way with formulas to do the following:
Within a workbook the 1st sheet is the data entry.
In another sheet that will total data from the data sheet is where I want to be able to total columns of data, depending on what is entered in one specific column:
Example:
Data Sheet, E2:E2999 is a unit number selcted by pull down tab entry.
G2:G2999 in the same sheet is where the data is.
Q: What formula would allow to total the data on the Total Sheet depending on what unit number is selected in column E on the Data Sheet and the data amount in column D from Data Sheet?
I need to set up an easy to use spread sheet for my office. It needs to be able to calculate the running total spent of fuel, as well as include any discounts we get and then calculate our total savings.So basically, total spent and total saved.
View 3 Replies View RelatedI'm sure this can be done but I don't think I have the formula correct. What I am trying to do is add each day's total while displaying a positive number if the total exceeds 6000.
View 5 Replies View Relatednumber for item detail level from category standpoint. For example, in the category sheet has total number per category and per month and in the item detail sheet has a list of item number with category. I want a formula to recognize which item belongs to which category then use the total number of category by month to multiply with % of total in column D from Item Detail Spreadsheet.
View 2 Replies View RelatedI am trying to create a very basic workbook that has 2 worksheets. one is a daily input for tonnes, that then just gets cut and pasted to a different program, and the other worksheet is the running total. i.e., it adds up every time you update it.
been trying to figure out a macro so when you press the update button it then just updates the monthly total.
Colac Production.xls
I am creating a spreadsheet for inventory use. I want to have a running total in (1) cell based upon a new/different number being entered into a different cell.
Column B, Row 1 (This will be a new/different number entered every day - inventory in or out, so positive or negative number)
Column D, Row 1 (This will be a running total based on numbers inserted in previous 2 columns)
Basically what I have is a key inventory. So there is column A with key number, B should be keys IN, C should be keys OUT, or ideally B would be IN and OUT meaning, for inventory IN input a positive number and for inventory OUT input a negative number, and D Should be total.
Column E represents number of keys currently in the inventory. I was going to hide the current inventory column so all you see is IN/OUT and total.
So what I need is to be able to just come in and type in a number in the IN and/or OUT column, without having to add/subtract it with the number already in that column.
Bottom line, I'd like to be able to use IN and/or OUT columns to just type in numbers as they come and not have to worry about what's already in those columns and get correct total number.
Ok here it is. Attached worksheet shows
Column A - Key Numbers...No data value
Column B - Inventory IN
Column C - Inventory OUT
Column D - Total
Column E - Current Inventory(Starting point)
So the formula I used to get what i currently have is (=B2-C2+E2). This way whatever i input in columns C and C. totals out in D. But this way every time I want to add/subtract a number in B and C, i have to add to the number already in the column. I'd like to be able to type in a number in B and C as i go and still have a correct total. I wouldn't mind having just one column for in/out and use positive and negative numbers to differentiate inventory in or out.
Key Inventory - Test.xlsx
we have one excel sheet. I want to write or edited data in specific cell. For example anybody can write in coloum : C1, c2, c3, c4, k6 and m6 (highlighted in green colour) and remaining all cell range protcted no one can change data. Also they didn't know formula which i m writing in others cell for example fom l6 to l33 or n6 to n33. We are attach file for ur ready ref to know easily.
View 2 Replies View Relatedformula which uses 4 cells
the 4 cells are
Cell B2 - this is a set figure which is the initial base figure - currently set to 43
Cell C2 - This subtracts Cell B2 figure (which is 43) from Cell E34 [=SUM(B2-E34)]
Cell E34 - Is a cumulative total of 4 cells [=SUM(E4,E12,E19,E26)] and displays the total.
Cell D2 is a set figure of 49
The formula I am looking for is once C2 reaches zero, I need C2 to remain displaying zero and the remaining figure to be deducted from D2 and displayed in that cell so C2 figure would descend from 43 until it reaches zero. but would then start decreasing D2 whilst C2 would remain static at zero and carry that the remaining figure to D2 which would be deducted from the starting total of 49 and display the figure.
I am a excel novice and can't seem to find a solution to this problem, there's most likely a simple solution. I want to calculate the total of N - M in L only if N is > £0, If I have not got a selling price in N how can I make cell L show blank?
I have attached a sample of the sheet.
I am using the following but need to add an additional factor into it and not sure how.
The following works... but I also need to change/add... if F1:F100 is equal to 'Cash' or 'Finance'... and I am not sure how to do two values in one column.
=SUMPRODUCT(--('Deal Log'!F1:F100="New"),--('Deal Log'!H1:H100="Cash"),--('Deal Log'!J1:J100="Knight"))
would like a very small macro for the following:
Units units remain day 1 day 2 day 3 ... day 13
MACRO
The units are the total number of units that can be bought ( in a game) and these are purchased on a daily basis.
I would like a column " units remain" as units are purchased to just count down auotomatically as numbers are entered into the daily row.
Thus:
11 xx day 1 day 2
Where xx would chage as numbers are entered into day 1-13 ( these will be either 1 or 2).
Basically, I'm trying to have a cell (eg.A1) where i can input a dollar value and when enter is pressed, on another cell (eg.A2) the dollar value gets added, then the original cell (A1) is cleared for the next input.
Then when I put the next input (A1) I want it to add on to this running dollar total (A2) and yet again A1 is cleared for the next input.
In addition to this I require an additional cell (eg.A3) that when each time a value is added in A1 it counts the times this is done.
I am displaying a total from a formula (shown below) in cell B20. If the value of cell F26 equals 1 the calculation is shown in B20. I want to add the following to it - If F26 equals 2 then display a message "No Discount Applied" in cell B20.
=IF(F26=1,B18-(B18*0.2),B18)
Basically, all I need to do is have a cumulative total in one cell that adds the same figure each fortnight. ie, adding 100 each fortnight would give me 500 after five fortnights.
Im assuming it needs to run off the date on my pc, and I've managed to figure that out with =TODAY(). What I cant figure out is how I would set a start date and then set my fortnightly figure to be added. Presumably then the formula would state "if today is 14 days (or divisibly by 14 days) greater than start date, add an extra increment".
I want to do a basic formula for a poker account to work out my P/L.
I have two sheets. The first sheet will record my P/L and the second sheet records deposits and withdrawals.
When I input a figure into Sheet 1, Cell A1, I want it to then be able to add to this figure the total that is in Sheet 2, Cell A1. Is this possible? This way the figure that I input into Sheet1, Cell A1 will give me the profit/loss after taking into account any deposits/withdrawals.
ie If in Sheet2, Cell A1 I have a deposit of -500. When I type into Sheet1, Cell A1, a figure of 800, it will then change to 300. It will add 800 less 500 = 300.
I have a userform that lets the user input a quanity. The check box will allow the total in textbox5 to be placed in another cell once the Accept buton is clicked. My problem is when the checkbox is checked, I cant get the total in textbox5 to cell E27.
Im sure this is not hard, but giving me a fit. :x
Private Sub Accept_Click()
Call AllGood2
End Sub
End SubPrivate Sub cancel_Click()
Unload Me
End Sub
Private Sub CheckBox1_Change()
If CheckBox1 = True Then CheckBox1 = TextBox5.Text
End Sub
Private Sub TextBox1_Change()
Call totalTextBoxes
End Sub
Private Sub TextBox2_Change()
Call totalTextBoxes
End Sub
I have a total box which should add up to 720 when other cells have data entered.
Is there a way that I could put up an error message if the total is not 720 in that cell when someone tries to save the worksheet?
Or maybe for eg, cell A1 does not add up to 720, if they then try and move on to cell A50, the message would appear then?
I would like to sum the values entered into A1 each time i enter a new value into A1 and to place the grand total, of all values entered, into A3 ? This is as long as the sheet1 is activated ?
i tried with Event (Change/Selection change), but could not get a result......................
I'm trying to have a cell (eg.A1) where i can input a dollar value and when enter is pressed, on another cell (eg.A2) the dollar value gets added, then the original cell (A1) is cleared for the next input.
Then when I put the next input (A1) I want it to add on to this running dollar total (A2) and yet again A1 is cleared for the next input.
In addition to this I require an additional cell (eg.A3) that when each time a value is added in A1 it counts the times this is done.
I have a sheet composed of daily sales. Within this sheet I have averages and totals automatically calculated for each week. I would like to set up a cell that keeps a running total of sales for the entire year as they are entered. I can set up the formulas for each week grouping and they work fine, but I can't seem to get it right for the entire sheet. Here are the formulas:
=sum(b2:g27)
=sum(j2:o27)
These formulas work fine by themselves, but when trying to write one formula to calculate the total for both cell ranges I keep getting errors. I just want one formula to calculate the running annual sales as they are entered. I know I'm missing something simple here, but I don't know what it is.
how can i count the number of filled rows and columns (containing both characters and numbers) in a worksheet through a macro? do not tell the individual functions like count or CountA.
View 5 Replies View RelatedIn an excel work shift schedule, I am trying to total the total number of days someone is scheduled for different shifts. I can get a total for the current schedule but I want to be able to have a year to date total as each new schedule is added in. These totals are in the AF through BC columns in the xray shift totals in the attached worksheet.
I don't know if it is possible or not and am working on a pre-existing worksheet.
Sub sumbotton()
Dim ar As Range
Dim rng As Range
Set rng = Selection.CurrentRegion
Set rng = rng.Resize(rng.Rows.Count + 1)
rng.Rows(rng.Rows.Count).Select
For Each ar In rng.Areas
ar.Resize(1).Offset(ar.Rows.Count) = "=SUM(" & ar.Address & ")"
Next ar
End Sub
I am creating a spreadsheet for inventory use. I want to have a running total in (1) cell based upon a new/different number being entered into a different cell.
Column B, Row 1 (This will be a new/different number entered every day - inventory in or out, so positive or negative number) Column D, Row 1 (This will be a running total based on numbers inserted in previous 2 columns)
Basically what I have is a key inventory. So there is column A with key number, B should be keys IN, C should be keys OUT, or ideally B would be IN and OUT meaning, for inventory IN input a positive number and for inventory OUT input a negative number, and D Should be total.
Column E represents number of keys currently in the inventory. I was going to hide the current inventory column so all you see is IN/OUT and total. So what I need is to be able to just come in and type in a number in the IN and/or OUT column, without having to add/subtract it with the number already in that column.
Bottom line, I'd like to be able to use IN and/or OUT columns to just type in numbers as they come and not have to worry about what's already in those columns and get correct total number.
EX:
1200
1205
1210
1215
Cell with total should contain 15
These are mileage numbers. At the end I need to know the total miles driven as miles are added. I need to be able to see the total miles driven as mileage is added. At the end of the week, I need to see total miles driven.
I'd like excel to calculate 3 totals for me based on the colour and value on a worksheet.
Basically, I work for various people and they pay at different rates per hour.
I currently have a spreadsheet with their names, times, and rates (see attached for example), but I calculate the amounts paid and due manually.
If possible I would now like excel to do it.
To explain further, 'J' gives me $10 per hour, and 'V' gives me $5 per hour.
Cells shown in red show work done but not paid for.
Cells shown in green show work done and paid for.
I'd like excel to automatically create totals as shown on the spreadsheet, namely:
Total due: xxxx
Total paid: xxxx
Total outstanding: xxxx
At any time during the month I can be asked to take on more work - I would then enter the code into the spreadsheet for the hours requested...and I'd like the totals to be update automatically.
I have a pivot table which I am interested in filtering in several different ways. The table contains a category for AREA on the Y axis and BLOCKS on the X axis. When unfiltered the tables displays AREA 1,2, and 3 and has a full list of parts. I can then filter the table by AREA to look at one area specifically, and when I do the BLOCKS list shrinks to only those which correspond to that specific AREA.
My problem is that I want to be able to reference on another sheet the value that corresponds to AREA 1 Total regardless of whether the table is filtered to only AREA 1 or if it is unfiltered. I cannot just reference the cell because AREA 1 Total is in a different cell when unfiltered then when filtered. Is there any way to do this?
Is it possible to have numbers added to the same cell and have excel continue to calculate the addition for me in that same cell......ex: I have the number 8 in cell d2 and I want to add the number 8 to that cell and have excel add the 8 to the previous 8 for a total of 16 in the same cell.....the next time I would add 5, and the total would be 21? Can this be done in a single cell?
View 10 Replies View Related