Sub sumbotton()
Dim ar As Range
Dim rng As Range
Set rng = Selection.CurrentRegion
Set rng = rng.Resize(rng.Rows.Count + 1)
rng.Rows(rng.Rows.Count).Select
For Each ar In rng.Areas
ar.Resize(1).Offset(ar.Rows.Count) = "=SUM(" & ar.Address & ")"
Next ar
End Sub
I need to be able to count all the blanks in columns other than A but only until the last used cell in column A. I am using a formula right now that counts the blanks in column A until the last used cell but I don't know how to apply the range of column A to other columns like B and C. Here is an example of what I hope to accomplish:
Formula used in A1 that I need applied to other columns but with the range of column A
="Total Blanks: "&COUNTIF(INDEX(A2:A8,MATCH(TRUE,A2:A8<>"",0)):INDEX(A2:A8,MATCH(2,1/(A2:A8<>""))),"")
Here is an example of what B1 and C1, with the formula, would look like if it counted blanks but with the range of column A
Total Blanks: 3
Total Blanks: 6
Total Blanks: 2
[Code].....
I have a report which has a list of customers, each customer has 24 columns which represent the payment history over 24 months. If a payment has been made for that month the date and time (formatted correctly) will be populated in this cell.
Each customer has a product name attached to it so a product can appear several times. I need is a formula that shows the total payments recieved for a particular month for a particular product. For example.
I have managed to create the following flag which works a treat, it picks up a date an account was set up but looks at 1 column.
This may not be the best way to do this, but I don't know Macros or Pivot Tables.
I am looking for a way with formulas to do the following:
Within a workbook the 1st sheet is the data entry.
In another sheet that will total data from the data sheet is where I want to be able to total columns of data, depending on what is entered in one specific column:
Example:
Data Sheet, E2:E2999 is a unit number selcted by pull down tab entry.
G2:G2999 in the same sheet is where the data is.
Q: What formula would allow to total the data on the Total Sheet depending on what unit number is selected in column E on the Data Sheet and the data amount in column D from Data Sheet?
I need to set up an easy to use spread sheet for my office. It needs to be able to calculate the running total spent of fuel, as well as include any discounts we get and then calculate our total savings.So basically, total spent and total saved.
View 3 Replies View RelatedI'm sure this can be done but I don't think I have the formula correct. What I am trying to do is add each day's total while displaying a positive number if the total exceeds 6000.
View 5 Replies View Relatednumber for item detail level from category standpoint. For example, in the category sheet has total number per category and per month and in the item detail sheet has a list of item number with category. I want a formula to recognize which item belongs to which category then use the total number of category by month to multiply with % of total in column D from Item Detail Spreadsheet.
View 2 Replies View RelatedI am trying to create a very basic workbook that has 2 worksheets. one is a daily input for tonnes, that then just gets cut and pasted to a different program, and the other worksheet is the running total. i.e., it adds up every time you update it.
been trying to figure out a macro so when you press the update button it then just updates the monthly total.
Colac Production.xls
In an excel work shift schedule, I am trying to total the total number of days someone is scheduled for different shifts. I can get a total for the current schedule but I want to be able to have a year to date total as each new schedule is added in. These totals are in the AF through BC columns in the xray shift totals in the attached worksheet.
I don't know if it is possible or not and am working on a pre-existing worksheet.
I have a sheet in my workbook with at least 180 small tables, there may be more.
I woulds like to be able to change total formulas for all tables at once to show either year-to- date or total year.
For example:
If we have only progressed through the second period of the year, I would like to choose something to indicate period 2. At other time I may want to know the total year whether the periods are completed or not.
I have a column with Cells that will sat True or False, the amount of rows will be different every time, I need to work out what the total percentage of True cells compared to the total number of cells. How would this be achieved.
View 9 Replies View RelatedI HAVE AN IF FORMULA IN 7 CELLS BUT I CANT SEEM TO BE ABLE TO GET THE RESAULTS IN THESE CELLS TO SUM IN TO A DIFERENT CELL ITS BEEN A WHILE SINCE I USED FORMULAS AND HAVE FORGOTEN THEM
View 2 Replies View RelatedI was wondering if I could get the data from Sheet1 into Sheet2 in weekly segments. So For example: in the week (5 working days) between 17/12/07 and 24/12/07 how many entries were in each Category? And then a running total disregarding the date range. Sheet1 will be constantly updated. I've tried to set up Sheet 2 as an example of what I need, but this can easily be changed.
View 5 Replies View RelatedPlease see the attached sheet. I have columns B through a lot (B through O in my oversimplified example). In every 7th row in each of these columns there is either a 1 or a blank/zero. I need to multiply that 7th number by the Quantity in column A, to achieve a total (ie the sum of each result of 7th cell*quantity) for each column in the bottom row, labeled "Totals".
In the actual version of my sheet, there are far too many rows to select everything manually. I've been fiddling with combinations of COUNTIF/COUNTA and OFFSET, but I haven't come up with a way to check for the 1 in every 7th row, THEN multiply that 1 by the quantity in column A, THEN add up the results for each column. As you can see, there are 1's elsewhere in the columns that are irrelevant to this particular calculation, so something like LOOKUP would also have to look in every 7th cell and couldn't just look at the column as a whole.
If you can't provide an immediate solution, but can at least point me to a resource that would allow me to devise a way to isolate every 7th row (THAT part is the sticking point), I'll surely post the solution to my own thread with updated keywords if I need it.
Formula(s) to do as explained in the attached example.
Example_formula.xlsx
[URL]
Now what I need is a formula similar to the one provided in the above referenced thread; however, I need it to sum the totals of all Children (C) from column BW in the attached excel file, and return the sum values found in BW to the corresponding employee (E), before the next E occurrence, or blank, if the row below the last row containing a C value in row M in blank.
refer to the excel file, specifically the row highlighted in RED, and the explanation to the right of it, for further clarification on what I'm needing the formula to do.
Ultimately, I have a census of employees with rates, and some employees cover their children, and I'm needing a formula that will be able to total up the monthly premium for each employee's covered children, and bring that total up to the same row that the employee's data is located.
I have a formula in sheet code to get a total of the following columns. The formula in these columns is not working. I'm not getting any error. The code is working fine without a require output.
Attached File : Total.xlsm
I am trying to create a worksheet with a total to date column in it. I have done a similar thing before using Nested IF's but obviously there is too many IF arguments for that in this circumstance.
Please take a look at the .xls page I have uploaded. The period displayed in cell AP5 is linked from another sheet where the user selects the period from a Data Validation DropDown box. The periods are as follows: January - March2008, April - July2008 etc etc.
You can see how the periods are formatted across the top of my main worksheet I wish to be able to take the period provided and then get a figure of the total to date for each row within the "Total to Date" column based on the figures upto that period. If you get what I mean?
i am setting up a material iventory using excel 2007 i require a worksheet to contain a column for stock in (+) and stock out (-) and a running total column, but i am struggling to create a formula for this. my column's would be (J) for stock In (k) for stock out and (L) as Running total
View 9 Replies View RelatedI've got an excel spreadsheet that is using imported figures from another source. I'm just trying to create a macro that will locate the last cell in Column N, Then will total all the cells above it. I've got the below code to select the last cell in Column N.
myrow = Range("N1:N" & Range("N65536").End(xlUp).Row).Count
For i = 2 To myrow
Range("N" & i).Select
But I can't figure out how to do the sum part. I've tried to record a macro but to no avail. Since the number of rows will change each day, I need to somehow catch the range. This is part of a bigger project, but if I can get this part working, I think I'll be home free. Attached is a small example.
I have 2 columns that are created as part of VBA code, A is a list of names, B has a corresponding set of numbers. I need to add some code that will remove the duplicates in column A and sum the values in Column B.
for example
A....................B
Dog................ 1
cat ................ 2
bird ................ 1
dog ................ 3
Would return
A .................... B
Dog ................ 4
cat ................ 2
bird ................ 1
I am working on an excelsheet containing a data dump from a manufacturing database. Inside this sheet i want to make subtotals of different production runs. The data that needs to be added up is in one big list between every production run there is an empty cel. So I want to make a formula that does: =SUM(one-cel-above-current:next-empty-cell-above)
View 6 Replies View RelatedI have this formula below which works for finding the Volume Total in range C7:E7...it displays the volume for that date in G7
Code:
=SUMIF(INDIRECT("'"&E$6&"'!B7:B10000"),$G$7,OFFSET(INDIRECT("'"&E$6&"'!B7:B10000")
,,MATCH($E10,INDIRECT("'"&E$6&"'!$C$7:$E$7"),0),,))
but when I use the formula for finding the PLanned Stops - Time in the range G7:H7 it gives the Volume Total from Column D...I want the Planned Stops -Time from H7.....
Code:
=SUMIF(INDIRECT("'"&E6&"'!B7:B10000"),G7,OFFSET(INDIRECT("'"&E6&"'!B7:B10000")
,,MATCH(E13,INDIRECT("'"&E6&"'!G7:H7"),0),,))
I need a code that will sum the total of a range of cells which meets the following conditions.
If B2 is not empty then sum ("E2:R2") into cell T2.
if B3 " "" "" "" "" (""E3:R3") into cell T3
ETC, ETC, ETC
Do until "B" is empty
i am looking for formula in my macbook pro excel where i have purchase apple 50kg for $50 and grapes 20 kg for $30 and orange 10kg for $15 and am doing this daily and in end of month i want to see separate kg's and amount for whole month and later year of apple, grapes and orange without sorting it
View 1 Replies View RelatedA$ SING $ Euro NOK UK US$
1.07001.25000.74186.10000.62081.0000
A 934.58
B 800.00
C 1,348.07
D 163.93
E 1,610.82
F 1,000.00
G 1,869.16
H 1,600.00
I 2,696.14
J 327.87
K 3,221.65
L 2,000.00
TOTAL 17,572.23
Values in column "H" (US$) have been divided by currency rates in Raw C2~G2 as we need the total in US $
But we also want to know the total amount of each currency used in column "H".
How to put a formula to find the total value of each currency used.
i'm tracking hospital census with days of month in columns and patients 1 - XX in rows. this is basically what i'm working with.
A...........B........C...D...E...F...G...H...I...J...AG...AH
Patient...Payor...1...2...3...4...5...6...7...8...31...Total
1...........MCR.....x...x...x...x...x...x...d...............6
2...........COM.........x...d..................................1
3...........SP............s...s...s....s...d....................4
4...........MCR.............................x...d..............1
5...........MCR.............................x...x..d...........2
Total.................1...3...2..2...2...3....1..0.........14
The "total" cell formula is =COUNTIF(G7:AK7,"X")+COUNTIF(G7:AK7,"s")
S and X just identify where that patient is med/surg vs. skilled.
I'm looking for a solution that will reference column cells B2-BX and add the total from that row (AH) if the payor of that row is MCR, then another cell that would do the same for SP, COM and so on. so in this scenario it would be something like
COM...7.1% (SUM col AH where col B = "COM" ie. 1/14)
SP......28.6% (SUM col AH where col B = "SP" ie.4/14)
MCR...64.3% (SUM col AH where col B = "MCR" ie.1/14)
I've got a list of 20 percentages which can range from 100% to -100%, the total of the 20 percentages should always equals zero but I need excel to give me a total so I can find any calculation errors.
How can I get a total at the bottom of the column?
I've tried SUMIF/SUMIFS, the only way I can get that to work is if I have one cell for >0 and another for
Sometime the ansewer in so simple I look past it. But how do you show the automated grand total in a line chart.
View 9 Replies View RelatedI have certain cells in column A2:A22 that have names of people. I want a formula in Cell A23 that gives me a total of how many names are in that range. I know this is simple, but how do I put my criteria that if a cell is not blank to count it?
View 4 Replies View Related