I'm looking to easily drag the sum of certain cells in a different column BUT keeping a specific range, it's hard to explain so i'll show an example...
Is there any way I can do this by dragging down the cell formula from B1 and it remembering the range of 4, so I don't have to manually select each range...?
I'm trying to come up with a formula which will add the cells in a date range. This date range may be within the same month or span several months but will always be within the year.
On the results page, Cell A3 will be the Employee Number, Cell B3 will be the From Date, Cell C3 will be the To Date. I need to find a for cell D3, the sum. For example, if A3 had 123456, B3 had 1/2/09, C3 had 1/3/09, then D3 would need to have 17.48 (8.88+8.6)
The way I'm currently looking at is adding a row between C and D on the data table below which contains the row number, then doing a VLOOKUP and a few indexes to pull the data but I'm concerned that pulling data from 7 different tables (for different types of employee hours) for 250 employees would make this take forever to recalculate.
Note that the table below has 12 rows for the 12 months of the years and the columns go all the way to 31. It can be counted on that if a date doesn't exist (for example, 2/30/09, the value in the cell will be 0 which means we can use ranges through the end of the month if needed) ......
I'm trying to create a sum that gives the output with the currency format but also change column D from from D2 to the Total the currency format. (it changes based on how many customers). Here is the code
Code:
Windows("Test1.xls").Activate Dim rng As Range Set rng = Sheets("Sheet1").Range("D65536").End(xlUp).Offset(1, 0) Range("D" & lastrow + 4).Select lastrow = Cells(Rows.Count, 1).End(xlUp).Row Cells(lastrow + 1, 4).Formula = "=sum(D2:D" & lastrow & ")" rng.Select ("D" & lastrow) Selection.NumberFormat = "$#,##0.00"
I know it has to do with the rng.select statement but I'm just not sure how to make it work for all of Column D from D2 to the Total/Sum.
I'm trying to create a shortcut that will allow me to add quotation marks to the begining and end of text in cells. I've tried the following, which works fine when only one cell is highlighted:
VB: Dim rng As Range Dim txt As String Set rng = Selection txt = """" rng = txt & rng.Value & txt
However as soon as I highlight more than one cell, it errors. How to make it work for a range of cells?
I am trying to add numbers from cells if it IsNumeric and for some reason in column K the macro doesnt recognize numbers after row 14?
The range column is "E4:E" Search criteria is the letter "R" in column "E" Then using OffSet, I go thru other columns and process data. Most of the macro works except for column K after row 14?
I want to add across columns, which is not so difficult but I have to "ignore" the blank cells because of the way my formula works.
I'm not sure of the correct mathematical term for the addition I have to do but here is my example:
in this row are the values
1 2 3 4 5
In the row below I want to add the numbers so the result is
1 3 6 10 15
basically, a cell is always adding itself to the result of the sum from the previous cells. This formula I can handle, (=A2+B1 then autofill the results by dragging the formula across the empty cells) but when there are blank cells between values I get the error message! value. How can I write a formula which will ignore the empty cells?
i have a problem adding cells every 5th cell for example i have
=SUMPRODUCT((C10:C67)*(MOD(ROW(C10:C67),5)=0))
this adds every 5th row in this range and it does it right as long as there is no text in the cells in between
it works fine when it looks like this
1 1 1 1 1 1 1
but it does not work when it looks like this
1 1 text 1 1 1
when this happens it appears as #VALUE, meaning an error but i don't understand why if i'm just telling it to look at every 5th row and those specific rows have no text in them
i have a spreadsheet with text in between the cells that need to be added so i need a formula that only adds up the cells with numbers on it, to be specific the numbers are either ones or zeroes.....
I need to add times of employess over a 2 week schedule.I have used a string variable to select the rows and columns as employees change.How do i add the times in this case.Sample code is below:
I need to identify any cells in a range that do not contain text then colour and comment them. I intended to use the following code, however it doesn't work as I expected it to.
With rRange.SpecialCells(xlCellTypeBlanks) If .Count > 0 Then .Interior.ColorIndex = zErrorColour .AddComment "This cell must contain a value" End If End With
The blanks cells are coloured OK but only the first blank cell gets a comment. Is there a reason why I can't add comments to all the cells in the range? And if there is a good reason, then I guess I'm going to have to write a loop to add the comments.
I'm trying to add a range to this email code that will then paste the information into the body of this email however instead of getting the data I need i'm getting "-1" in the body instead.
I've tried defining the range below and adding that line to the main code but it doesn't work, the code will run but i get "-1" in the body.
We have a client that has to total the number of days that people received medical care (for insurance purposes). BUT...they can't count duplicate days. Some of the dates show a range of days, others only one day. They've asked for my help. (We're actually a computer services firm, but I'm pretty good with Excel...until now!)
In column C I have placed the correct totals for the date ranges, according to the payment policies. But I can't figure out how to write the formula that accommodates all the variables (mostly since all the unique dates aren't entered--only ranges).
Each line is a different medical charge, so line 1 might be 22 days of hospital stay. Line 2 is for a different charge, but covers the same dates, so it can't count. Lines 3, 4, and 5 all occur within the previously calculated range, so they don't count. The date range in line 6 is six days but 4 of them have been counted already, only 2 days fall outside an already calculated range.
It would be easy enough to do this manually for a small list, but this patient has 1367 entries in 4 months of care! And there are others that are much larger.
Fortunately, all the dates are in calendar order. Also, fortunately, they don't need line-by-line totals, just the grand total at the end of all the unique days in the range. So if I can figure out how many unique days are in the columns ....
I have a spread sheet I use to track tools. One tool may be checked out / returned several times a week. When I do custom sorting I end up with the Tools listed neatly by date and number. EX: ...
My macro adds a sheet to an existing Excel workbook. However, this only works the first time. If I delete the added sheet and run the macro again I get the above error. The macro below call a second macro (see later )
I have a named range on a hidden sheet which populates data validation lists on 'sheet 1, cells b5-b55. My question is this...Is it possible to, upon entering a new item in b5 (for example), to have that item automatically added to the named range? (preferably through a button on a pop up form that opens w/ the question 'would you like to add to the list?, similar to an access form)...I've seen one example in the past which I found with a link from this site, but couldn't make it work. If the answer to my question is yes, could you also suggest a location of an example if you know of one?
I am trying to allow a user to select a file and have the only sheet from that file added to the workbook they are working in. When I run this code I get a "Subscript Out of Range" error
Code: Sub importRawData() Dim rawDataSheet As String MsgBox "Please select the unmodified AR Aging Report exported from PFW", vbOKOnly rawDataSheet = Application.GetOpenFilename(FileFilter:= _ "Microsoft Excel Workbooks, *.xls; *.xlsx", Title:="Select File") Sheets.Add(Sheets("PWF AR Data"), , , rawDataSheet).Name = "PWF Raw Data" End Sub
I m adding cell with alphabets. I attach a pic of what i want it to look like. Is there a command to do it for you instead of me outting one by one myself? Ex. 'A' must first followed by 'B' and so on, futhermore, if there a CApital 'A' and a lower case 'a' the capital 'A' goes first.
I have a row data corresponding to the measuring of load cell per min and I need to average the values per hour. So I have a column B for the date (from 1-01-2013 to 31-01-2013, column C for the time (0:00:00 to 23:59:00), and D de values per min I want to average. I have to do the same for the rest of the month of 2013 (February, ...., December).
I would like to know if there is a way to create a formula to calculate the average of the first 60 values (to get the average of the first hour of 1-01-2013), and then copy it to get the average of the following 60 (average of the second hour in 1-01-2013) and so on.
If there is no way to do it, I would like to know if I can do it using functions like average, match, index, offset, what would be the best match of those functions.
I also tried it by doing the analysis in another tab and using the function "averageifs" with two criterias: one for the date (example 01-01-2013) and another one for the hour (example 0:00:00), but it didnt work, it show error: #value. I inserted an extra column in the data tab with just the hour (example 0:00:00) in front of the corresponding column with (example 0:01:00, 00:02:00, etc) Equation I used for this:
=AVERAGEIFS('Data (min)'!D$6:D$43206,'Data (min)'!$A$6:$A$44646,A6,'Data (min)'!$B$6:$B$44646,B6) =AVERAGEIFS(TAB AND COLUMN WHERE THE RAW DATA IS,RANGE OF CRITERIA 1,CRITERIA 1,RANGE CRITERIA 2,CRITERIA 2)
I have a list on names that is in the range on Sheet5!A1:A149 I'm using the function to randomly select one of those names.
What I want to do: I want to add the randomly generated name to a range that I can then refer to later to see if that name has already come up. So I know if that name has already been used.
Here is what I have In cell H4 I put the following code =B5:G5
But when I add number in thous cells nothing happens. I want cell H4 to keep a running total of cells B5 through G5 so as I add numbers to the cells I would like the total in H4 to change.
