I have a database in the form of a spreadsheet with the following column headings:
A=DATE (3 letter abbreviation for the month...jan, feb, mar, etc)
B=Client
C=City
D=State
E=Department
F=Contract number
Is there a formula that I can enter in another worksheet (which is being used as a report), that will "grab" the monthly data for all entries for a given month (i.e. "mar"), and auto-populate corresponding cells with each?
I have a workbook with three sheets:
'Activity' 'Expenses' and 'Income'
On the 'Activity' sheet I:
select the date,
select the description, and
select the category (dependent on the description using indirect)
and enter a value. ($ dollar amount)
How do I make the entered values appear automatically :
- on the correct Sheet for the Description - 'EXPENSES' or 'INCOME'
- in the correct columns (matching) the category
- and in the correct row (matching) the date,
- "add to" - if a value already exists in the cell (more than one transaction on a date)
after they have been hand entered on the 'Activity' sheet?
I am trying to add some code that will auto populate cells based on entries and list selections. In the attached spreadsheet, when information is added to cells in column 'A', the date should auto populate the cells in column 'C'. When a status of "Complete" is selected from the dropdown box in cell 'B', the date should auto populate in the cell in column "D".
The code partially works in that it will auto populate columns "C" and "D", but the code errors out every time and I have to cancel the error to continue to the next entry.
I have my projection formulas that use the date and age to estimate production on each farm. Basically the age is calculated first and then the production rate is estimated. I have been trying to figure out if, instead of having a formula in each cell, can I use VBA to populate the ages and then the production.
Here is an example:
8/22/2009
FarmAge8/22/09Age8/29/09Age9/5/09Age9/12/09Age9/19/09Age9/26/09Age10/3/09Farm 1
34181351813617937179381793917940177Farm 2
39223402204122042220432204422045218
All the functions I have created work, I just can't have the worksheet auto-calculate due to the total number of cells with functions. Calculating the worksheet takes approx 1 min...
I should be able to adjust any code to the ranges needed, but this example shows the basic layout.
How can I auto populate certain relevant cells that has been chosen by input in a different worksheet?
Example:
Input cells in Worksheet 1:A1= 100 (Data to Show in Periods chosen below)
A2= 3 (begin period)
A3= 5 (end period)
Result on worksheet 2: A1(PERIOD 1) = 0
A2(PERIOD 2) = 0
A3(PERIOD 3) = 100
A4(PERIOD 4) = 100
A5(PERIOD 5) = 100
A6(PERIOD 6) = 0
A7(PERIOD 7) = 0
The file is attached here. I would like to be able to autopopulate cells based on a dropdown. The first tab has the final report and the other 2 tabs are the raw files.
KMPH_Inventory.xlsx‎
I'm trying to figure out a way to populate multiple cells automatically with certain information after entering info into a single cell on a separate worksheet in a separate workbook.
Our "master" sheet has 22 total columns (A-V), and our weekly "status" sheet only has 7 total columns (A, E, P, L, M, N, R).
Column A on both sheets is labeled "Sample Number". On the "status" sheet I want to be able to type, for instance, "2012-228" into A2 and have the corresponding values from Columns E, P, L, M, N, R on the "master" sheet automatically populate into B2-G2 on the status sheet if this is at all possible.
I need to auto populate an excel spreadsheet however it has 3 criteria to match. Pressure, size and name. I need to somehow lookup the name and if it matches the pressure rating and size then return the quantity in that cell. There is 2000 cells and I am sure there is a logic function or someway to complete this task faster then manual entry.
View 4 Replies View RelatedI am looking to auto generate a roster/schedule. I have a spreadsheet with shifts for each weekday that I need to populate every week with names to pick from a drop down list. the drop down list is made using data validation and looks at a dynamic named range to allow me to select only the people who are available to work a certain shift.
Is there a way to do this using vba?
My sheet goes from monday to friday on the coulombs. On the rows i have various data sections for each day. I would like the data on the last day (any day after monday) that there is data for a sheet to input that data into the monday slot when the "master date" is changed on the cheese sheet. The idea here being that the script will take the last entered data for a given sheet, and put it into the monday coulomb on the same sheet when the date is changed. This is kind of hard to explain so if you need clarification let me know. Attached is the sheet i'm working with.
View 14 Replies View RelatedI have a column of values (E4:E87). I'm adding 1 value to this column manually each day...so tomorrow (July 24th) I will have E4:E88...and so forth. Each day is a new row.
In column Z (i.e. cell Z87) I have the formula =(SUM(O53:O87))/(SUM(E53:E87)). Z88 will have
=(SUM(somevalue:O88))/(SUM(somevalue:E88)). This gives me a resulting percentage for a rolling period of time.
I need an automated way to populate "O53" and "E53" ("somevalue") in the formula so that the SUM of the current row's cell (i.e. E88) through [whatever] is 50 or greater. (The sum of the values should be as small as possible, but at least 50, and should not include any older values than absolutely necessary for it to equal at least 50.)
An image of my spreadsheet can be viewed here: [URL]
Is it possible for the tab name to auto populate from a specific cells contents?
View 9 Replies View RelatedI'm creating a configuration tool for instrumentation that has several options. Many of these options are dependent on one another. To summarize, I need to:
*Conditionally lock cells (and populate with "N/A") OR allow selection from drop down list - the list exists, it's the locking and auto-population I'm struggling with
Example: If A1 = No, then B1 = "N/A" and is locked, else allow selection from drop down list in B1
I have a button in a spreadsheet that auto populate's certain cells with this script very simple.
Sub Bundle_8230()
[C242] = "HP NC8230"
[C243] = "Deluxe Laptop Bag"
[C244] = "Travel Battery"
[C245] = "Mouse"
[C246] = "Keyboard"
[C247] = "Port Replicator"
[D242] = "1"
[D243] = "1"
[D244] = "1"
[D245] = "1"
[D246] = "1"
[D247] = "1"
End Sub
What i would need is a script so that it doesn't look at those specific cells
but a range of cells and every time the button is clicked it will fall into the first empty cells.
So example when button is clicked
Case 1 if cells C242 has something look at cell C243
If cell C243 has something look at cell C244
If cell C244 has nothing then enter data that goes with that button.
I have around 6 to 7 different buttons.
I need the tabs of a project action log to auto-populate and auto-delete in a master log. (So when something is added or deleted in a tab it is added or deleted on the master) I use excel a little bit for work and personal finance purposes but I have zero experience with macros or VBA.
View 1 Replies View RelatedI am trying to auto-populate text in cells in area A, based on data I enter into other cells in area B. I want the area A cells to be for display only, as all editing will be done in area B. The problem is: how do I do this such that the text I write does not get cut off if is longer than the column width? See the attached document for a clear example and description of what I am trying to do...
Excel Q.xlsx‎
I am trying to auto generate a calendar based on two drop down menus - Month and Year.
Once the month and year is selected I want to import all work orders onto the calendar based first on the "Labor Name" found in the list of work tab, then assign each work order for that labor name to the respective date on the calendar for the month.
August PM Schedule Demo.xlsx
Is it possible to create a macro which adds a new sheet and names the tab from a cell value somewhere?
View 5 Replies View RelatedI have 5 columns: A, B, C, D & E of which I have drop downs for: Yes, No, Maybe, Not Sure for A, B, C, & D. I need column E to offer a hyperlinked mailto:ask@bob.com when A, B, C have Yes, Maybe or Not Sure selected. If Yes, Maybe or Not Sure is selected for D, I need to have a hyperlink mailto:ask2@bob2.com. When no is selected for any of them, I need to have it say None.
View 9 Replies View RelatedThe first tab I have a summary sheet which I want to auto populate with a sumproduct function, the second tab is where the dates and values are I wish to sum the value if it’s returned in January. I had a go to try sum the entire range see below but it’s not working
=SUMPRODUCT(--('Alex Guest - Scotland'!$G$19:$G$1048576>=1/1/2009),--('Alex Guest - Scotland'!$G$19:$G$1048576<=3/1/2009),--('Alex Guest - Scotland'!$H$19:$H$1048576))
The ultimate goal I am trying to achieve is if there is a date in January in the date returned column and the php column does not contain a value I want it to sum in the summary sheet in January. Hopefully if anyone can advise that would be great then I can look at the formula and try workout to sum only if there is a value in the php column in January
on Sheet 2, I have a very long list of names and addresses. What I am trying to do, is to have the correct address auto populate in Cell B253, depending on which name I type into Cell B252.
The formula has to be able to determine which name is typed in cell B252, i.e., John A Doe, and then auto populate his address in cell B253.
My macro runs, and it inserts a cell, but in order to record data on a summary page, I need a formula to auto populate, and I've tried having the macro copy/paste and I've tried ActiveCell.Formula...and nothing seems to be working. The formula needs to go into Cell B3.
View 9 Replies View RelatedI would like to enter a name in E11, and then have G11 populate the name of the company that person belongs to, from a different sheet.
If the person is new, the company name entered into G11 should create a new column on the Companies sheet.
I've attached a dummy sheet which should make it more clear.
DummyCompanyPopulate.xlsx
i have been trying to write an Excel sheet in 2007
that can be given a random amount of (money) and show
me the best way to spend it.
Weapons:
Name - Power - Cost
1 - 10 - 20
2 - 20 - 40
3 - 40 - 80
4 - 80 - 160
5 - 160 - 320
6 - 320 - 640
So i have 40K to spend, i want to eneter 40000 into a box and it
will auto populate the number of units i can buy, always setting the weapon
#6 as the priority.
I am populating column D with
=IF($C2="","",VLOOKUP($C2,Name_ID,2,FALSE))
Based on selection in column C populated using a drop down list from a range titled PracticeID. Other named ranges, all on sheet titled Validation, are PracticeName and Name_ID (a 2 column range made up of PracticeName and PracticeID). This works great the first time a selection is made in column C. But, of course, if the user needs to change the selection in column C, the value in column D does not change. Would the cell change event be the appropriate place to place this action?
I use the code below to autocreate a folder and hyperlink to it. It creates a folder when I enter a drivers name in column D it then turns the name into a hyper link to that folder - my problem is I have 2 files in the drivers folder on the C drive - one called wkd.xlsm (a small spread sheet) and one called notes.txt (a notepad document) I would like these files to be automatically added to the folder that is created when I add a drivers name to the D column - I would also like a hyperlink to be created to the wkd file in column H and a hyperlink to the notes file in column X.
Private Sub Worksheet_Change(ByVal Target As Range)
folderpath = "c:drivers"
If Not Intersect(Range("D3:D1000"), Target) Is Nothing Then
If Target.Value "" Then
If Dir(folderpath & Cells(Target.Row, "D") & " " & Cells(Target.Row, "C"), vbDirectory) = vbNullString Then
[Code] .........
here is a formula i would like in cell D20 (might not be a formula out there,maybe more code)
if cell C20= "S" then text in Cell D20= "SHOP" (then will be able to type after "SHOP")
if cell C20="F" then text in Cell D20="Field" (then will be able to type after "Field")
I have many facters (15 to be exact) that I would like to do this in the range of D20:D38
Some Background info:
This is my first post! I am a total novice when it comes to VBA in Excel (but I'm a fast learner!), so please bear with me if my question is either obvious or easy (or if this is a question that's been asked 14980213 times already). I have some programming experience, but all in C or C++, not in VBA--this makes the project challenging. I also have to hand this off in a few months and trust that it'll never break, ever--more challenging.
I'm trying to make a Participant Tracking System for some workshops we offer. The intent is to make a userform so that an administrator can input all the information for the participant in question. One important question on the form is which course the participant intends to take; the snag is that the current list may change over time.
The Spreadsheet is set up with Course headings starting at R8C8, and continuing across for all 16 courses we currently offer. The data for the participant is entered into Rows 1-7, and the date they completed the course in the appropriate column for that course. There are some formulas in Rows 1-7, the important one here counts up the number of classes currently offered.
So, below is the code i'm trying to use, at least to start. I am making a combobox that has all of the available classes.
Private Sub UserForm_Initialize()
Dim ClassList() As String
'R5C6 contains a formula that calculates the number of classes offered. The value is currently 16
Redim ClassList(R5C6)
iCount = 0
y = 8
Do While iCount > R5C6
'R8C8 is where the class list begins.
'It continues horizontally along the rows for the 16 titles offered.
Range(R8Cy).Select
ClassList(iCount) = ActiveCell
y = y + 1
iCount = iCount + 1
Loop
With ClassListBox
.Clear
.List = ClassList
.ListIndex = -1
End With
End Sub
I used to have a line that replaced the following chunk.
Range(R8Cy).Select
ClassList(iCount) = ActiveCell
It read
ClassList(iCount) = R8Cy
and did nothing for me at all.
When I initialize the userform, I get a blank combobox. It doesn't do what I want it to do, but that's probably because I'm telling it to do something weird.
Need formula for populate a cell with a date. I have a workbook with 5 sheets (mon, tues, wed, thur, fri) and I'd like to type a date on mondays sheet so all the other sheets follow on the date ie:
Noverber 1st 2008 is typed into sheet 1: A1, sheet 2 automatically displays November 2nd 2008, sheet 3 displays November 3rd, etc..
I know it's basic progression, but I'm not sure how to do it with date/text...
I am trying to auto populate into a column that starts in cell E5 and references cell C5 (along with a dataset in N and O). In cell E6, I copied and pasted this formula and changed all of the C5 values to C6. When trying to use the auto populate cross hair tool, excel changes all N and O cells, from O165 to O166, O167 when they should have remained O165 and N165 for every cell.
=IF(OR(C5<MIN(N9:N165),C5>MAX(N9:N165)),"",IF(C5=MAX(N9:N165),INDEX(O9:O165,
MATCH(C5,N9:N165,1),1),(((INDEX(O9:O165,MATCH(C5,N9:N165,1)+1,1)-INDEX(O9:O165,
MATCH(C5,N9:N165,1),1))/(INDEX(N9:N165,MATCH(C5,N9:N165,1)+1,1)
[Code].....