I need this solution if possible:
On one part of sheet I have items set in rows : A1= apple,A2=banana, A3=orange etc.
Now I need to set in lets say A55=A1, B55=A2, C55=A3 etc. How to do this in fast way without writing a formula in each cell?
Example:
Tab where the information is captured:
___A____ B____ C____ D
1 _TP1__ TP2__CON___PT
2 __3____3_____2____4
3 __2____1_____6____5
The tab where I want the info to pulled to runs in a row, not in columns, and there are 6 different branches with 35 different categories that I need to add the formula to to pull the info I require.
So, when I type the formula (=TAB1!A2) in A1, I get the correct info I require, but then when I drag it to the right (A2), it changes the formula to (=TAB1!B2) as apposed to what I want which is (=TAB1!A3). So now I have to manually type the formulas which will take me forever!
I have searched for this on the site as I thought it would have already been asked but I couldn't find anything. I have a formula in cell C7 which I wish to copy both down to the last row (xlup from column A) and across to the last column (xltoleft on row 6) but I cant seem to work out how to do it. I have used the .autofill before but for dynamic rows only. Is it possible to do for columns too?
View 2 Replies View RelatedI have a workbook which has one sheet "Raw Data" where I will cut and past blocks of data of various numbers of rows. Another sheet "level one calcs" conducts various calculations on the raw data. I was wondering if there would be any way to create a macro which would copy down (autofill) the last row of my my calculation page for the exact number of rows I added into the raw data. The goal here would be so that I dont have to highlight and copy down the formulas on the calc sheet each time I add in new data.
View 3 Replies View RelatedProblem: The following code autofills columns O:P beyond the last row of data in column H.
Range("O3:P3").AutoFill Destination:=Range("O3:P3" & Range("H" & Rows.Count).End(xlUp).Row)
How exactly do I autofill by columns? In this example I recorded a macro and cleaned it up autofilling through E1 but it could be a number up to 50.
View 2 Replies View RelatedI need with the below statement. I need the statement to autofill columns b6:y6 down as long as there is data in column A6 down.
I am hitting a wall here
Sub Macro3()
'
' Macro3 Macro
' Macro recorded 10/14/2011 by Oasis Group
'
' Keyboard Shortcut: Ctrl+Shift+B
'
Range("B6:Y6").Select
Selection.Copy
Application.CutCopyMode = False
Selection.AutoFill Destination:=Range("B6:Y" & Lastrow)
Range("B6:Y" & Lastrow).Select
End Sub
I have got 5 columns. What i intend to do is to loop to the last data cell in column d,e and autofill it down from there till the last row in column a,b,c. What my code does now is to autofill the entire column c,d from the 1st cell and not from the last data entry cell.
Dim r As Range
Dim lRow As Long
lRow = WorksheetFunction.Max(Range("A65536").End(xlUp).Row, _
Range("B65536").End(xlUp).Row, Range("C65536").End(xlUp).Row)
Set r = Range("d1:e1")
r.AutoFill Range("D1:E" & lRow)
I had searched and tried dozens of variations but just can't get it right.
I'm trying to autofill "vertically" in a spreadsheet using a formula which loads value from a different sheet.
Lets say I have cell (A1 for example) ='2013'!A39
Now I want to fill A2-A30 in a way that the formula updates to ='2013'!B39, ='2013'!C39, ='2013'!D39...and so on
I've tried using ='2013'!A$39, but this only copies the formula as it is. When I try to autofill cell A2-A30, the formula still is ='2013!A$39
Is this possible to do?
I currently have an array that is 6 columns by 7 rows that is populated by referencing other workbooks and returning the sum of their values. For issue tracking revison etc... I would like to have the rows incrementally numbered (0,1,2... until it reaches number "X" which is a grand total in one of the fields.
This would happen for column 1 row 1 all the way through column 6 row 7 and fields with 0 as a total don't get a number or can have a 0 or blank.
Ex.
1 2 3 4 5 6 (rows)
1 3 x x x x x
2 x 7 x x x x
3 4
4
5
6
7
row numbering...
1
2
3 (skip col. 1 row 2)
1
2
3
4..... continues on till the end.
I would like this to be something somewhat automatic to eliminate the redundancy of having to manually perform this task.
I have wookbook with a lot of sheets on it
The first sheet to be filled is called "Local Info"
In this sheet in the Active Cell "G7" the user must register a number between 0-500
This number must affect my next sheet called Competence Map Autofilling rows 7+8 from Columns A to AM
So If for example I put 83 in "local INFO" G7.
I will get 172 rows with text (the first 6 Headers) the 7-8 original and from 9-172 filled with the information given.
My Table has a data validation list in one row of a table. And different formulas in different rows.
The Table is expanded only into columns. Which means, there will be no new rows...only columns will be added.
If we enter text into the header cell in a new column, the whole new column gets formatted, but the list and formulas do not auto fill into new columns.
Of course an easy way is to copy and paste a column...but is there a way to auto fill lists and formulas into columns of the table? Similar to how the rows get autofilled?
To be more specific, I work with highway signs, and they all have codes. the codes are priced according to their size, sheeting, and aluminum structure.
so codes can be something like : GS-4, IB-12, RB-21, and their sheeting could be: 231, 241, 245S, 420P, and their price is dependent with the size, materials, and quantity ordered. So a quantity of 3 or less of a flat sheet of aluminum, with HIP reflectivity sign would be a 231, where 4 or more of that same sign would be 241.
A workbook has the contracted price, the cells are in order. The order sheet I use is separate from this. But I have to look for each sign for all the info. How can I get the one cell to recognize the Code, along with the Quantity ordered?
I have over 9,000 rows of data. In column A, I have different values that I need to populate down to associate with values in other columns. I can't simply autofill all 9,000 cells in column A at once, because the values that need to be filled down change at irregular intervals.
My end goal is to be able to filter out values in column B to show their association with the value in column A, but I need column A fully populated.
So I need a way to fill A2:A7 with value from A1 (I don't care about B7 being empty, I can still have Martha in A7 with no adverse affects). But I need the fill to continue through 9,000+ rows where the number of rows to fill is inconsistent between value changes in column A (Martha-5, Sarah-3, Beth-4, Donna 3), and there are over 400 unique values in column A.
This is definitely more involved than I am familiar with, but any simple way for me to identify and list which of the 400 bakers made scones..
A
B
1
Martha
[Code]....
I am putting together a macro to import a CSV file onto excel. I will be manipulating columns of data (concatinating some, dividing by 100 etc.)
What I am having trouble with is that each file imported will have different number of rows.
I tried, in recording a macro, to use autofill (entered formula and double-click fill handle to drop the fourmula into each cell) hoping this would show me how to do it but alas, it just coded the range as the starting and stopping cells (didn't show a count formula or some such.
I am using Windows 7, with Excel 2010.
I have one Worksheet Short Course - PB's Which contains all swimmer information and searches through all previous swims and reports back the swimmers current Personal best times (PB)
I am creating a work sheet to calculate percentage increases over a set date period. I have managed the calculations but can not get the autofill to function as I was hoping.
In my short course sheet 1 Row = a Swimmer and there details
In my new sheet, I have 3 rows for the same swimmer
Row 1= Swimmer and PB's before a set date
Row 2 = Swimmer and PB's After set date and upto Todays date
Row 3 = Percentage calculation of difference between the two rows to enable track performance increase
I have all of this working and in place and want to copy the formula's down now to cover all swimmers in the club.
When I copy the 3 lines down, Autofill adds 3 to the row reference for the first line and I just want it to add 1.
ROW3) =IF('Short Course - PB''S'!A3="","",'Short Course - PB''S'!A3)
ROW4) =A3
ROW5) = A3
[Code].....
i need to mark some row (which has some content written in), mark other row(with data too) and switch/transpose them mutual. when i was trying transpose method, which is using for switching rowns and columns, it wrote me error, that data are overlapping. it means it cant work on same things (rows > rows, columns > columns).
View 14 Replies View Relatedremoving duplicate rows and move other data frm rows to columns.xlsx.
I am attaching a sample excel sheet showing what I need to do.In the first tab, I have a list that includes duplicate rows (first column only). I want to remove those duplicate rows but I don't want to lose the data in the following columns which can be unique or duplicates as well.
see the desired result tab in the sheet to get an idea of what I am looking for as the end result.
Keep in mind that the actual source file I am working with could have up to 50000 row, and the expected results could be around 2000 rows. So nothing can be done manually.
I have this in Column A, with about 120 entries:
Company 1
Contact 1
Address 1
City, ST, ZIP 1
Phone 1
Fax 1
Company 2
Contact 2
Address 2
City, ST, ZIP 2
Phone 2
Fax 2
Company 3
Contact 3
Address 3
City, ST, ZIP 3
Phone 3
Fax 3
I want this:
Company 1 Address 1 City, ST, ZIP 1 Phone 1 Fax 1
Company 2 Address 2 City, ST, ZIP 2 Phone 2 Fax 2
Company 3 Address 3 City, ST, ZIP 3 Phone 3 Fax 3
all the way down.
I can't figure out how to record the macro to tell it to then skip the blank line, collect the next set of data, and put it in the next row. I can do it for two, but then it just replaces the first two with the next two and I lose data.
Column A is numbered 1 -100 successively Column B thru D contains data that goes with the assigned number in column A. I need to be able to move rows of data in column B through D to a different set of rows all at the same time (not one cell at a time) without disturbing the set numbers in column A. And with that, have all the other rows of data automatically adjust accordingly(not to be deleted or replaced).
View 1 Replies View RelatedI have individual data files (one for each participant). Each file has 64 rows (one for each trial in an experiment) and 18 columns (one for each variable). I would like to create a master data file in which each participant is represented in a single row. I will then have 1152 columns (18 columns for the variables, repeating 64 times so that each trial is represented).
In other words, my individual data files look something like this:
Participant 1 (title of data file)
Trial/var1/var2/var3
1 55 43 65
2 54 43 56
3 33 23 56
and I want to compile all the data into a single file that looks like this:
Participant/Trial1_var1/Trial1_var2/Trial1_var3/Trial2_var1/Trial2_var2/ ...
1 55 43 65 54 43
2 . . .
I know how to record macros and use IF, THEN, AND, & SUMIF statements creatively, but that's about it. I was hoping to record a macro that I could use on each individual data file to turn it into a single row, and then paste each row into the master file.
How to align two columns that sometimes have rows that are unequal in number. The data is sourced from a web page that has a table layout and the table lays out the one to many values this way in the table. My data looks like this:
Table ...Term
t1 ..... term1
t2 ......term2
..........term2.a
..........term2.b
..........term2.c
t3 ......term3
..........term3.b
The editor removes leading spaces. In the column Table there are only three rows but in column Term there are multiple rows per single row from column Table. So one row t2 for column Table has three rows in column Term. Are these cells merged and can I in a mcro detect if the cells are merged? How is the addressing of the merged cells in a VBA macro?
Using the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.
VB:
Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range
[Code].....
have a large dataset where I want to move some data from rows into columns and other data from columns into rows. I have enclosed an example. It is indeed only an example as the original has many more rows and colunms. What I want to do is to move the the years (columns) into rows and move Product (row) into columns. The example shows how it currently looks and how I want it to look.
View 2 Replies View RelatedI have created a spreadsheet to show some reports and I wanted to serch for some datas which overloops themeselves. If you can have a look at a test file I attached you will see the full picture. I have 2 tables, where the 2nd one is on the right side of the 1st one. 1st table:..............
View 3 Replies View RelatedI wrote a short VBA to change known data from rows to column and columns to row.
Data is like this:
Hello Hello Hello
Hello Hello Hello
I can chang it to Hello .... Hello
or
Hello..
.
.
.Hello
I need to figure out a way to do this when data is not fixed - ie:
Hello Hello Hello Hello Hello
Hello Hello Hello
Hello Hello Hello
Hello
or
Hello Hello Hello Hello Hello Hello
Hello Hello Hello
Hello Hello Hello
Can you offer suggestions on what commands I can use to find the begining and ending of data, so that no matter what format it is in I can change it to one row or one column?
I have 20,000 columns of data that I need turned into 4 rows.
I know about copying and paste special (transpose), however, the data is in groups of 4 columns
Example:
1. Name
2. Street
3. City, State
4. Number
5. Name
6. Street
7. City, State
8. Number
and I need it to look like
Name Street City, State Number
So is there anyway that I can make it turn columns into rows by groups of 4?
I have huge data like below.
Parent Site:A
Child Site:A
Child Site:B
Child Site:C
Parent Site:B
Child Site:A
Child Site:B
Child Site:C
Child Site:D
Parent Site:z1
Parent Site:1
I am looking for a macro which can convert above data to columns as per below.
******** ******************** ************************************************************************>Microsoft Excel - r2c.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1=ABCDEF1Parent SiteChild SiteChild SiteChild SiteChild SiteChild Site2AABC 3BABCD 4Z1 5112510156XA1Z33 720A Sheet2 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
In Column 'A' I have part numbers. In Column B I have suppliers that supply that part number. My report drops into excel as per the below table. My issue is if a part number can be supplied by more than one supplier it duplicates the part number in Column 'A' based on how many suppliers can supply that part number In Column 'B' it will list each supplier for that part number In the table below you can see that part number 1122 can be supplied by supplier 'ABC' and also 'DEF' - Part number 9966 can be supplied by 3 different suppliers so lists the part number 3 times in Column 'A' and in column 'B' it lists each supplier i.e. 'TUV', 'WX' and 'YZ'
What I want to be able to do is the suppliers in Column 'B' be listed in the cells to the right of the part number and dupliactions in Column 'A' be removed
'A' 'B'1122
ABC
1122
DEF
9966
TUV
9966
WX
9966
YZ
I have a list of election results for the British election in 2010 which I'm trying to compile into a format like this: [URL] ...
The list of base data I have however has each constituency in columns rather than in rows: [URL] ....
I know there's the copy and paste using the Transpose tool, but I don't really want to have to do this 650 times for each individual constituency: is there any way I can select all of it and do some kind of trick so that it knows when to go to a new row based on when the name of the constituency changes?