have a large dataset where I want to move some data from rows into columns and other data from columns into rows. I have enclosed an example. It is indeed only an example as the original has many more rows and colunms. What I want to do is to move the the years (columns) into rows and move Product (row) into columns. The example shows how it currently looks and how I want it to look.
View 2 RepliesI have text strings in A1:A30 and I have text strings in B1:B30.
I am trying to find a macro (or any quick/easy method) of interleafing them into 1 long column (i.e. C1:C60) as follows:
A1
B1
A2
B2
A3
B3
etc...
I need two solutions, if possible. One macro and then a "poor man's way" in case the macro breaks down the road. something where I can do it with copy/paste, formulas etc.
I will just use letters and numbers to make it easer.........
Column A might have 10 rows, with 1,2,3,4,5,6,7,8,9, and 10 as the data.
Column B might have 7 rows with A,B,C,D,E,F and G as the data.
I need column C to have 70 rows, with 1A, 1B, 1C, etc. .......through 9E, 9F through 9G as the data.
I have a spreadsheet that calculates data in multiple columns (A:AN) and each column has 27 rows of data called "Sheet 1". As it stands, the spreadsheet goes out very far. On "Sheet 2" I would like for all of the data in "Sheet 1", columns A:AN to be "transposed" to "Sheet 2" in column A only. So, column A on "Sheet 2" would have the data from "Sheet 1" A1:A27, B1:B27, C1:C27, so on and so forth. I would like for the formatting to maintain the same order as well.
An example would be:
Sheet 1
Column A B
Row
1 Green Red
2 Blue Yellow
3 Black Cyan
4 Pink Magenta
[code]....
I have three rows of data (29-31) from columns D to Q.
I would like to take D29 and add each of the values in the adjacent columns exactly once and sum up the value D thru Q
For example I'd like to return not just Sum(D29:Q29) but also Sum(D29:R29)+Q30, Sum (D29:R29) +Q31.
Macro that would add these values?
That is D29 + E29 or E 30 or E31 + F 29 or F 30 or F 31 + G 29 or G 30 or G 31... and on?
Even though I wrote "or" above, i would need the other values to be added in a separate calculation, until all possible permutations of D and the following 8 columns and 3 rows of data are exhausted.
removing duplicate rows and move other data frm rows to columns.xlsx.
I am attaching a sample excel sheet showing what I need to do.In the first tab, I have a list that includes duplicate rows (first column only). I want to remove those duplicate rows but I don't want to lose the data in the following columns which can be unique or duplicates as well.
see the desired result tab in the sheet to get an idea of what I am looking for as the end result.
Keep in mind that the actual source file I am working with could have up to 50000 row, and the expected results could be around 2000 rows. So nothing can be done manually.
I have 2 columns of data E and F. Column E has 11 different words that randomly repeat, Column F has 10 years of dates, about 1,000 entries (10/11/12 format). Both columns values come from formulas.
I am trying to copy cells E & F to columns K & L starting in row 2 only if there is is data in column E (one of the 11 words) and skipping all others rows. Both the E & F values of tthe row must be copied together, i.e if text is in E45, then copy E45 and F45 into column K and L starting with K2 & L2. This is a task which will be repeated multiple times as data is replaced in columns A-D.
I have this in Column A, with about 120 entries:
Company 1
Contact 1
Address 1
City, ST, ZIP 1
Phone 1
Fax 1
Company 2
Contact 2
Address 2
City, ST, ZIP 2
Phone 2
Fax 2
Company 3
Contact 3
Address 3
City, ST, ZIP 3
Phone 3
Fax 3
I want this:
Company 1 Address 1 City, ST, ZIP 1 Phone 1 Fax 1
Company 2 Address 2 City, ST, ZIP 2 Phone 2 Fax 2
Company 3 Address 3 City, ST, ZIP 3 Phone 3 Fax 3
all the way down.
I can't figure out how to record the macro to tell it to then skip the blank line, collect the next set of data, and put it in the next row. I can do it for two, but then it just replaces the first two with the next two and I lose data.
I have a table with 6 columns (A to F) and multiple rows each, with cells containing words. Taking the words in any one cell from each of the columns in order from A to F will form a complete sentence each time. I need a solution to display all unique possible combinations in column G.
The number of rows is different for each column. A successful result in column G has to include cells from all columns (A to F).
I searched this forum and found a few analogous questions/solutions, but nothing close enough for me to apply to my case. I tried using a concatenation formula, but I have to manually edit the formula in each cell to get all unique combinations (and that would mean thousands of times). If I just drag the formula down it will increment all cell rows instead of one cell's row at a time.
Here's an example : all possible unique combinations.jpg
I'm currently faced with a spreadsheet that has data formatted like this:
A
1 RandomRowofData1
2 RandomRowofData2
3 RandomRowofData3
4 RandomRowofData4
5 RandomRowofData5
6 RandomRowofData6
7 RandomRowofData7
8 RandomRowofData8
9 RandomRowofData9
Every 9 rows, a new "set" of data repeats itself (wow, this is so hard to put into words)....
I need to figure out a way to get the data in column "A", every 9 rows, to transpose itself into 9 separate columns.
I'm trying to create a macro that transposes data from columns to rows.
My source data is laid out so Column A and B contain item identifiers, and then the header for Column C to Column S contain dates (March, April, May, etc) and the row data below contains quantities for each month. This is on Sheet1.
I need my end data (on Sheet2) to have the item detail in Column A and B, the quantity in Column C and the Date in Column D. If there is a date that has no quantity then it should be skipped.
Sample Source Data (Pipes added for clarity, they aren't in the actual data)
Part |Description |June 4 |June 11 |June 18
A | PartA | 5 | | 12
(Please note June 11 has no quantity)
Sample Destination Data:
A | Part A | 5 | June 4
A | Part A | 12| June 18
Below is the start of the code, obviously I have a ways to go before it's fully functional but hopefully you get the idea how I'm trying to attempt this. Where I'm having issues right now is referencing columns by number. Is there a way to do this so I can do Column = Column + 1 to advance columns to the right? Or any better way to address this all together?
HTML Code:
Sub ConvertToRows()
Dim ReviewRow, ReviewRowEnd, PasteRow, ColumnNumber As Integer
ReviewRow = 2
[Code]....
I have 300 rows worth of data that looks similar to this, all organized in one column:
John Q. Smith
Programmer
2111 NW 13th St
Anywhereville, USA, 55555
(555) 555-5555
Joe P. Snider
Organizer
5645 NW 45th St
Anywhereville, USA, 55555
(555) 555-5555
Patty Williams
Accountant
6454 NW 34th St
Anywhereville, USA, 55555
(555) 555-5555
As you can see it is consistent with the name, position, address line 1, address line 2, Phone number, for every single entry. All my names are already alphabetized so I don't have to worry about it. What I want to do is have the information for each entry translated into 5 separate columns so it looks like this.
John Q. Smith Programmer 2111 NW 13th St Anywhereville, USA, 55555 (555) 555-5555
Joe P. Small Organizer 5645 NW 45th St Anywhereville, USA, 55555 (555) 555-5555
Patty Williams Accountant 6454 NW 34th St Anywhereville, USA, 55555 (555) 555-5555
Supposing I started the sheet in the top left corner at A1, I was just going to have cell B1=A1 then Cell B2=A6 then just autofill down column B but it doesn't work. I have seen some people do something similar to what I want with VBA but I am convinced there has to be something simple in with an excel formula seeing as my information is already so organized and consistent.
i need to mark some row (which has some content written in), mark other row(with data too) and switch/transpose them mutual. when i was trying transpose method, which is using for switching rowns and columns, it wrote me error, that data are overlapping. it means it cant work on same things (rows > rows, columns > columns).
View 14 Replies View RelatedI am trying to reformat the attached doc into one single column, It's a race listing of overseas marathons and I need it to look like this
Event Name
Event Date
City
Country
Entry fee
Website
in date order, one event after the other in a single column so I can flow it into a word doc ready to be designed. I need to apply in Excel (I am using 2007) to get this doc into the required format?!!
How to align two columns that sometimes have rows that are unequal in number. The data is sourced from a web page that has a table layout and the table lays out the one to many values this way in the table. My data looks like this:
Table ...Term
t1 ..... term1
t2 ......term2
..........term2.a
..........term2.b
..........term2.c
t3 ......term3
..........term3.b
The editor removes leading spaces. In the column Table there are only three rows but in column Term there are multiple rows per single row from column Table. So one row t2 for column Table has three rows in column Term. Are these cells merged and can I in a mcro detect if the cells are merged? How is the addressing of the merged cells in a VBA macro?
I am trying to create a straight column list that can take the rows and columns of a table, and list only the nonblank items. The formula I am using only seems to work with one column, not multiple.
Formula:
[Code] .....
I have a macro that converts all my PDF Purchase Orders to a text file and inserts the data/text horizontally into another document. However because the PDF's or the text within the PDF can be fomatted differently (that is on different lines etc) it therefore imports the information and it looks mis-aligned.I have attached a simple spreadsheet showing some sample text as it is imported and then below this how it should look like, all in line.
The range where the highlighted text in red is, is variable (but say nothing more than a variant of 10 columns). The text can also be Uppercase or Lowercase.So, I was wondering if there is macro code to find the "text" on various rows/columns and align it all in another column?
I have a worksheet which contains 2 columns which is needed to work my problem.
Unique Work ID and Description
The unique work ID are the same for each description, but there are up to 5 different description associated with each unique work id.
I'm looking for an automated process but where to start to convert the 5 rows in the unique row and 5 column for the descriptions
I am working in the attached spreadsheet. For anyone who does not wish to open the link, let's say these sheets are titled 'Sheet1' and 'Sheet2'.
Sheet2 looks like this:
Year Cat Name
2013 4 Sal
2013 4 Pat
2013 3 Pat
[Code]....
Now, how may I pull this data into a summary sheet (Sheet1) that skips over any instances where column A ("Year") is blank so it looks like this:
Year Cat Name
2013 4 Sal
2013 4 Pat
2013 3 Pat
2013 2 Pat
2013 5 Bob
[Code]...
Note: All columns are the EXACT same across each sheet(including Sheet1, Sheet2, Sheet3), if that extra piece of information works.
PS It is fine if, in order for a formula to work, I need to copy and paste the formula for the length of rows per each Sheet to consolidate.
EDIT:
So, in my industry, any summary-level data (shown on Sheet1) must have a linked reference to a particular sheet (Sheet2, Sheet3, etc.) so the user knows where the raw data came from. This is to ensure increased accuracy of data and minimize human error (like, if for example, I accidentally didn't copy and paste all the rows correctly).
I have uploaded the actual sheet to show what the data actually look like. I am trying to pull in 2013 data into my "Summary Page" and would like to have all the data linked to the '2013' sheet but skip any blank rows.
Here is my failed formula:
=INDEX('2013'!F$3:F$338,SMALL(IF('2013'!$E$3:$E$338<>"",ROW('2013'!$E$2:$E$338)-ROW('2013'!$E$2:$E$338)+1,ROWS(B$1:B1)),""))
I am working with an excel spreadsheet. There is a column for "name", and then the next column is for medical condition.
If the same patient has multiple (say, 4) conditions, the rows for "name" are combined into a single cell(let's say, a cell going from row 2 to row 5, witha a single name in the combined cell) , with the next column having four different cells adjacent to the single cell (cell 2 has "bleeding", cell 3 has "fever", cell 4 has "diarrhea", and cell 5 has "rash"). Some patients have only single conditions, single cells.
Will this mess up COUNTS and COUNTIF?
Is there a way to split the combined cell2-5 for ''name" into four cells all containing the same name?
I have created a spreadsheet to show some reports and I wanted to serch for some datas which overloops themeselves. If you can have a look at a test file I attached you will see the full picture. I have 2 tables, where the 2nd one is on the right side of the 1st one. 1st table:..............
View 3 Replies View RelatedI have a table of data (say Column1 to Column 5) with multiple rows.
Column 1 to 4 will have the lookup values in multiple rows and Column 5 data should be picked up using vlookup or other lookup function.
I managed to somehow bring all these lookup values in (Column 1 to 4) in a single column in another sheet. I am now trying to use some lookup or other functions to match this single column and pick column 5 data in original sheet. Result i am expecting is lookup value in first column and next to it column 5 value.
It is basically a lookup wherein lookup value is spread over multiple rows and columns and result column is fixed. I tried using vlookup, but lookup value column and column number had to change every time when i moved from column1 to 4.
The number of rows you are pasting and then you can select that same number of existing rows and use "insert". This is what I'm trying to achieve:
(before paste)
A
B
C
(after pasting unknown number of rows)
1
2
...
n
A
B
C
Is there really no built-in way to do this?
Let's say I have one column of;
1
2
3
4
5
6
7
8
9
What is the most efficient way to change this into '3-columns & multi-rows' like this?:
1 2 3
4 5 6
7 8 9
The actual list is a lot longer and numbers are not in order.
Count all the true statements in column A (Work) of sheet1 (Checklist), once counted insert that many rows on sheet2 in a specific location, I found a count formula just don't know how to do the insert rows part
Code:
Sub CountRows()
Dim Rng As Range, CountTrue As Long
Set Rng = Sheets("Checklist").Range("Work")
CountTrue = Application.WorksheetFunction.CountIf(Rng, "True")
End Sub
Column A is numbered 1 -100 successively Column B thru D contains data that goes with the assigned number in column A. I need to be able to move rows of data in column B through D to a different set of rows all at the same time (not one cell at a time) without disturbing the set numbers in column A. And with that, have all the other rows of data automatically adjust accordingly(not to be deleted or replaced).
View 1 Replies View RelatedI have individual data files (one for each participant). Each file has 64 rows (one for each trial in an experiment) and 18 columns (one for each variable). I would like to create a master data file in which each participant is represented in a single row. I will then have 1152 columns (18 columns for the variables, repeating 64 times so that each trial is represented).
In other words, my individual data files look something like this:
Participant 1 (title of data file)
Trial/var1/var2/var3
1 55 43 65
2 54 43 56
3 33 23 56
and I want to compile all the data into a single file that looks like this:
Participant/Trial1_var1/Trial1_var2/Trial1_var3/Trial2_var1/Trial2_var2/ ...
1 55 43 65 54 43
2 . . .
I know how to record macros and use IF, THEN, AND, & SUMIF statements creatively, but that's about it. I was hoping to record a macro that I could use on each individual data file to turn it into a single row, and then paste each row into the master file.
I have 20,000 columns of data that I need turned into 4 rows.
I know about copying and paste special (transpose), however, the data is in groups of 4 columns
Example:
1. Name
2. Street
3. City, State
4. Number
5. Name
6. Street
7. City, State
8. Number
and I need it to look like
Name Street City, State Number
So is there anyway that I can make it turn columns into rows by groups of 4?
I have huge data like below.
Parent Site:A
Child Site:A
Child Site:B
Child Site:C
Parent Site:B
Child Site:A
Child Site:B
Child Site:C
Child Site:D
Parent Site:z1
Parent Site:1
I am looking for a macro which can convert above data to columns as per below.
******** ******************** ************************************************************************>Microsoft Excel - r2c.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1=ABCDEF1Parent SiteChild SiteChild SiteChild SiteChild SiteChild Site2AABC 3BABCD 4Z1 5112510156XA1Z33 720A Sheet2 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I want to compare two columns. I would like to see if the contents of column B appear anywhere in column A, for any amount of rows, and if it does, to place the match in col C.
So in the example below, red in B1 would be checked in A1 through A1000 or however long A is. When any row has red, place that match in that row for C.
This would be repeated until all rows in B are complete.
Example
Col A: red
Col B: red
Col C: red
Col A: red
Col B: blue
Col C: not found