I have a command button that I want to automatically copy and paste certain data to another worksheet when clicked. I keep getting a "runtime error 1004; application-defined or object-defined error". The code I have so far is:
View 5 Replies
I have a workbook with 2 - worksheets "DATA" and "LETTER".
The "DATA" sheet has columns "First Name" "Last Name" "Address"...etc.
The user can enter in either a "X" or a "x" in cells B6:B100 on the "DATA" worksheet.
After the user enters a X or x and hits the macro button I need it to copy certain cells from "DATA" worksheet to "LETTER" worksheet. I have listed a example below.
In this example if a "X" or "x" is entered into B6 on "DATA" worksheet and the macro button is hit, then: ....
Is it possible to automatically copy or load data from one excel spread sheet into another excel sheet? Could this be done with a macro?
View 14 Replies View RelatedI have been working on a macro that compares a existing list of data to an updated list of data and then either moves any data not on the new list over to a completed tab (followed by deleting the record on the existing sheet), and then adds any items not on the existing sheet, but which appear on the new list, to the existing list.
I have come across a stumbling block, i have managed to identify on the existing list the rows of data that have been removed from the new list and therefore need to be moved over to the completed tab, but when i select the data it selects the header row aswell (which will always remain the same row). Obviously this then pastes the header row aswell, and also i can't seem to get it to paste in the new sheet to the next available row (i.e this will be used daily and i don't won't to overwrite the infor already in the completed tab). the next issue i have is then when i go back to existing sheet to delete the data i just copied across, as the header was initially select this also gets deleted.
The code below, is the complete code, including filtering, copying some forumals etc. The area i am getting stuck on is highlighted in red:
Sub Update()
Dim bottomrow As Long
Dim My_Range As Range
bottomrow = Cells(Rows.Count, "C").End(xlUp).Row
Set My_Range = Range("A1:Y" & bottomrow)
[Code] .....
can excel do this (see the attachment pls). if possible can someone show me how to do that. i am new in excel vba.
View 9 Replies View RelatedI need to copy and paste data with imposing a condition from one worksheet to the other. I also need a code to update an existing condition.
Code:
Sub COPYPASTEDATA()
Dim rcnt As Variant, i As Long, j As Long
rcnt = Range("A" & Rows.Count).End(xlUp).Row
j = 4
For i = 2 To rcnt
[Code] ........
The procedure does not update the changed condition ( I have pass/fail as condition). Once you run this macro, the data will be pasted but when you change a condition from "fai" to "pass". The pasted data in sheet 3 is not updated. I either need worksheetchange procedure or maybe a code to delete (refresh) sheet 3 data before running the existing macro.
I have Name, location, status (pass/fail) and comment in columns A, B, C, D in sheet 1.
I have two worksheets 1) PL dbase and 2) Waiting list. Both setup as Lists. Where Excel automatically inserts a new row as you click in the current rows...
I want to autofilter Waiting list column I for the value of "Yes"
Copy all the data autofiltered in Waiting list to the next available row(s) on worksheet PL dbase.
I am looking to create a macro to be assigned to a button that copies the last row of data entered and then pastes it to the last empty row on a different worksheet. This is a dummy spreadsheet to work with (I have more data, but the concept is one in the same). Sheet1 ("Branch1"), Sheet2 ("Branch2"), and Sheet3 ("All"), the names in brackets are names of the sheets, but for ease I'll refer to them as Sheet1, Sheet2, and Sheet3. I have columns beginning in B as follows: Date, Branch, Currency, Coin, and Total (the branch and Total are tied to formulas, however I just need to the text values and formats to come over to the other worksheet). have the portion regarding the copy of the last row in Sheet1, however it won't PasteSpecial.Selection in Sheet3 as it says the cells are not sized or formatted correctly.
VB:
Sub CopyB2()
lr2 = Sheets("Branch2").Range("B" & Rows.Count).End(xlUp).Row
lr3 = Sheets("All").Range("B" & Rows.Count).End(xlUp).Row + 1
Sheets("Branch2").Range("B" & lr2).EntireRow.Copy Sheets("All").Range("B" & lr3)
End Sub
I am looking to see if is possible to copy and paste a worksheet and then remove data( only values not Text) and also not removing formatting and formulas
View 1 Replies View Relatedi need a macro which copy and paste from multiple worksheets (except for 3 worksheets which is named after Jan, Feb and Mar) into one worksheets (named as OVERALL). The data to copy will cover from cell A1:D1 and below where there is data available.
View 5 Replies View RelatedI have a copy and paste macro below, that copies the selected rows and pastes them into a different sheet called Blank BOM. Each time they are pasted, it just writes over the previous items at the top of the list. I would like it to paste in the next open row, so I can go back and forth between the sheets and add things. Here is the code:
VB:
Sub CopyRow()
Selection.Copy Sheets("Blank BOM").Cells(Rows.Count, 1).End(xlUp).Offset(1, 0)
End Sub
I have around 50,000 rows of data down each sheet.
These are made up of approx 4000 areas of data. (the areas of data are from columns A:N and between 2 and 30 rows deep)
Seperately I have a cells contain formula covering combinations of 2-30 cells deep.
I want to afix these formula to the 4000 areas.
Thus, if the first 10 rows of the sheet constituted Area 1 I would want to refer to the complimentary 10 row formula range and afix it in the adjoining column to the Area 1 (columnO). If the next range, Area 2, was 6 rows deep I would want to search for the 6 row formula range and afix that to Area 2 (columnO), and so on.
Manually, over 6 sheets, I would have to do around 24,000 copy/pastes and this isn't practical.
Does anyone know how it can be set up to run automatically?
I need code automatically copy and paste column A to column B every very three seconds
View 8 Replies View RelatedI need to automatically copy cell IR18 value to cell JT18. I've been searching the forum for some code and I came up with something that only partially works for me:
View 10 Replies View RelatedI get sent 5 seperate excel sheets from different teams on a monthly basis. I then normally copy and past them into one overall monthly sheet.
Is there a Macro that can automatically do that.
I've been tackling this data capture/paste issue for a week or so. I found the string below which does provide a good foundation for my challenge. But, my basic level of understanding macros limits my modifications to meet my needs.
[URL] ......
I have 20 worksheets in my master file corresponding to Excel files individual associates will update weekly. After the associates have updated their individual files for the week, I want to capture the data entered and paste values into a master file containing a worksheet for each associate (sharing the same name as the individual associate file). All of these files are housed on team SharePoint sites.
I need a macro to perform several steps after clicking a "Run Update" macro button in the master file:
Open individual associate fileIn master file, search for each Initiative listed in column B (starting cell B3) in the individual associate file (in column B starting at cell B11)If Initiative is found in individual associate file, copy adjacent data in columns D:J for the respective rowIn master file, paste values to the corresponding Initiative row for the corresponding week's worth of dataIf Initiative is not found in the individual associate file, move to the next Initiative listed in the master fileRepeat these steps for each individual associate file
Linking would be the easiest way to accomplish this if I wanted to have a multitude of weekly individual files for the associates. However, I'd rather each associate have one file for them to update (basically overwriting their previous week's entries).
I need to ensure the paste values corresponds to the appropriate day of the week. In simpler terms, if the date in the individual associate file in cell D9 reads Oct 1, 2012, the data captured from that row needs to be pasted to the corresponding row/column in the master file that reads the same date.
I am developing a charge rate calculator which allow me to select job, level and input the base pay rate, it will calculate the charge rate to client. What I need is once every thing is done, by clicking the Confirm button (form control) in Charge Rate calculator sheet, it will automatically copy and paste the job title, all charge rate into the Summary sheet as in the attached. And the user select another job title, and click confirm again, it will add to the next record in the summary sheet. It will keep adding until the "clear button" is click, which will clear all record in the summary sheet.
View 7 Replies View RelatedI am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
View 2 Replies View RelatedI have the following code in another workbook that is used to populate a cell on the same sheet based on input to cells in column 'A'.
Is it possible to modify this for the attached workbook to select a cell with data (numbers) on the Input Data sheet in column 'E', add text to the beginning, ('CG' in this case), and paste the result to the Import Template in the corresponding cell of column 'A'? I currently have a formula copied to dozens of cells in 'A' but since the number of rows for the Input Template is variable, there are usually cells in 'A' that contain CG but no corresponding data in the rest of the row.
I have data in some of the cells within range A26:A39
These cells are populated via an IF function on another worksheet. Even though the cells appear blank (as in the value returned is ""), there is a formula in these cells. I think it's called formula blank?
I am looking for a way to copy the data from the cells within the range which are not blank (ie: not = "") and paste this data elsewhere on the sheet in a list with no blank spaces in between.
I anticipate that there will be 4 non blank cells within this range.
Ideally I would have data from the nonblank cells copied and pasted to cells
A40
A41
A42
A43
can someone make a code for a range.Name = "match" as soon as active then that active cell is to be copied to cell C2.
View 9 Replies View RelatedI would like to copy and paste two columns from a worksheet to another worksheet simultaneously. I would like to have a macro to do this function.
View 5 Replies View RelatedI want to automate the following steps when cell A8:A11 changes in sheet "InfoAA":
(1) clear contents and formats of cells A1:A4 in sheet "InfoBB"
(2) copy cells A8:A11 of sheet "InfoAA" (which are formulas) and past it as text in cells A1:A4 of sheet "InfoBB".
(3) then automatically run a recorded macro named "BoldFirstName"
See attachment.
I need to loop through worksheets in a workbook and copy every first cell value(A1) and then paste into a new worksheet.
I have tried various loops. some have copied first value for the first sheet and then pasted in the new sheet. while others have been not so good.
This is the code I have so far and this does not work at all.
Code:
Sub Check()
Dim ws As Worksheet
Dim lr As Long
Dim treg As Worksheet
[Code]......
Ok What I want to do is copy the info in Cells A1:N55 into cells A63 onwards, now this I have completed so far with the following code, but what I also want to do is copy any changes that are made in cells A1:N55 from when this copy function is run into cells A63:N118.
Does anyone know of any way I could go about doing this?
Sub CopyJob()
Dim wSheet As Worksheet, strWS As String
For Each wSheet In ActiveWorkbook.Sheets
strWS = Left(wSheet.Name, 2)
Select Case strWS
Case Is = "AJ", "CJ", "PJ" .......................
I'm looking for a formula that will automatically copy an entire row of data and paste it on one of many other pre-created sheets dependent on the data in a given column of the row.
View 2 Replies View RelatedI would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
HTML Code:
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
Range Pear
A B C D E
4 1 3 5
5 1 1 1
6 2
7 2 2
8 5 7
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
1) I cannot figure out how to write VBA so the "Show Results" button will open the hidden worksheet when clicked.
2) When I use the userform to add new info, it does save to the worksheet, but when I cose the userform and try to open the spreadsheet, I get the following message, "Userform is already opened. Reopening will cause any changes to be disguarded". If I answer yes, I lose my changes, if I answer no, the changes are saved. I want this message to go away and data from the userform to automatically be added to the spreadsheet.
3) I want to make sure the "Account Number" field has a 9 digit number in it before it can be saved. If there is not a 9 digit number I would like an error message saying "Please enter a 9 digit account number" as a pop up.
4) I want to make sure both the "Account Number" and the "Assignment" fields have been populated before the data can be saved.
I currently have created a database (sheet two) with information including ID # (VH-XXXXX) in Column A and all the necessary information related to that unique Item. What I would like to do is search based on the ID number, have it filter, then copy and paste the row into another worksheet. Is this possible? I am relatively new to VBA and have written codes for copy and pasting rows, but never with an autofulter.
View 3 Replies View Related
