I'm looking for a formula that will automatically copy an entire row of data and paste it on one of many other pre-created sheets dependent on the data in a given column of the row.
View 2 Replies
I'm a novice Excel 2007 user and appreciate all the help I can get. I have a workbook with monthly worksheets in it. When a certain data Type is selected from a drop down menu in that monthly worksheet than I would like to have it automatically enter specific data (Name, Date, Eval, Type) copied to another worksheet (CC) in the same workbook. I have been manually entering the data so far. Another thing, some of the data will be entered into the Monthly worksheets and some will only be manually entered into the CC worksheet so it would need to accomodate both methods of data entry. Please let me know if I need to clarify. I have attached the workbood, too.
View 11 Replies View RelatedI'm not sure that I'll be able to explain this clearly, so I've attached an example. There are 3 columns - Issue, Action Group and Status. Many Issues belong to the same Action Group and others do not belong to any Action Group. The is also a Status summary section that has the total Issues and Actions associated with each status. For example the Status called Resolved could have 10 issues and 5 Actions (including blanks). The problem is that I can't figure out a way to get the total for the Actions. As I said this explanantion isn't great, so the attached sheet
View 3 Replies View RelatedOk What I want to do is copy the info in Cells A1:N55 into cells A63 onwards, now this I have completed so far with the following code, but what I also want to do is copy any changes that are made in cells A1:N55 from when this copy function is run into cells A63:N118.
Does anyone know of any way I could go about doing this?
Sub CopyJob()
Dim wSheet As Worksheet, strWS As String
For Each wSheet In ActiveWorkbook.Sheets
strWS = Left(wSheet.Name, 2)
Select Case strWS
Case Is = "AJ", "CJ", "PJ" .......................
I have a workbook with 2 - worksheets "DATA" and "LETTER".
The "DATA" sheet has columns "First Name" "Last Name" "Address"...etc.
The user can enter in either a "X" or a "x" in cells B6:B100 on the "DATA" worksheet.
After the user enters a X or x and hits the macro button I need it to copy certain cells from "DATA" worksheet to "LETTER" worksheet. I have listed a example below.
In this example if a "X" or "x" is entered into B6 on "DATA" worksheet and the macro button is hit, then: ....
Is it possible to automatically copy or load data from one excel spread sheet into another excel sheet? Could this be done with a macro?
View 14 Replies View RelatedI have a command button that I want to automatically copy and paste certain data to another worksheet when clicked. I keep getting a "runtime error 1004; application-defined or object-defined error". The code I have so far is:
View 5 Replies View RelatedI have to create a macro that envolves a loop and not sure where i have to start. I have a sheet of data and my aim is to email sections of this data of to different email addresses in Lotus Notes. I have figured out how top do the latter just the former i am a little confused about. Basically on my sheet of data each row has a specific branch #, i want to be able to loop a formlua so that when ever it finds a number it creates a spreadsheet. The next aim which i can do is then in the macro email this sheet off to a specific address and then kill it.
The loop macro should then go down the spreadsheet again to find the next branch number and create another spreadsheet.. and the process repeats itself. I know it can be done, just not sure how..
I have problem to copy data from other worksheet. yes, i can do Vlookup or IF function, but it will copy only when key in the formula, and it is not practical to do that if the columns are more that 10.
Situation is like this:
Worksheet 1 - > A1 Customer Name, B1 Amount, C1 Details.
Worksheet 2 -> A1 Customer Name, B1 Completion, C1 Total Cost, D1 Amount, E1 Date, F1 Details
I want to create a formula which will copy automatically all the data 100% completed in Worksheet 2 into Worksheet 1. What i have in mind is using something like this for Worksheet 1:
=IFERROR(INDEX(Worksheet2!$A$2:$F$15,SMALL(IF(Worksheet2!Criteria=100%,ROW(Worksheet2!Criteria)-ROW(Worksheet2!$B$2)+1),ROWS(A$2:A2))),"")
Copy and paste each cell below when M is true or greater then 0 to a new worksheet called Price Summary. If cell is false or 0, do not copy. I would like the text in N to paste to the first available row in A and copy M as well to the corresponding B. I only need the values of these cells to copy and not the formulas. Been trying to get this to work for a while with no luck.
Excel 2007MN17$018$01920$021$022$023$024$025$026$027$028$029$030$031$032$033$034$0250# Vessel Pricing TESTWorksheet FormulasCellFormulaM17=IF(L17=TRUE,INDEX(_250lb12inlegs,B2),"$0")N17=IF(L17,"12 in.
[Code].....
Data exists in a workbook's sheet name "0293" in columns A, B, C, & D. If a row's value in column B exceeds zero, the entire row & formatting needs to be added to the bottom of data in a sheet called "Comprehensive" of the same workbook and put 0293 in column E of the same row. What would be the simplest VBA code to copy sheet 0293's data & add it to the "Comprehensive" sheet with the sheet name in column E of the same row?
View 2 Replies View RelatedI have eight locations that appear on a single spreadsheet/Text file. I need to separate based on the Property ID for each location and then paste the result into a separate sheet for each one. I have arrange the code to look for each property ID and then copy the found data, but I am having a problem. The first find and Copy drops the first row but adds two to the end, so I am getting data for the next company. The second problem is that the second set of found data is appended to the size of the first found set. ( The first set is 3,570 rows, the second set is 2,646 rows. When Resized 6,216 rows are copied ) I can't seem to figure out how to reset the found range.
Sub Test()
Dim RngSize As Long
Dim srtHere As Long
Dim endHere As Long
'Find The First company
RngSize = Cells.Find("337x2", [B1], , , xlByRows, xlPrevious).Row
'Select columns to copy by resizing the found area to include additional Columns
Set b = Range("Test").Find(what:="337X2").Resize(RngSize, 9)
'Copy Found area to the destination........................
I need a macro that will search data from a range of cells in one column for multiple criterias and them copy the entire rows to a new worksheet.
Example I have a list of group names
Network
Telcom
Help Desk
BA
Network
I only want to choose all Network and Telcom rows copy to another worksheet.
I have seen all kinds of copying routines, but haven't been able to get what I want.
1. Copy Row contents from activeworksheet
2. The activeworksheet will have various row counts
3. The activeworksheet has row 1 as header.
4. The criteria to use is in the current worksheet columns P through Z
5. The criteria to look for is the word inspect. only the word inspect, not words that contain inspect (i.e. "inspection") should not be found.
6. The word could be in column P and in S, but needs to be only copied once, becuase it has meet the criteria, but it also could only be in c
7. Copying the row into a Sheet named "Inspection"
As a bonus would be cool to be able to copy certain cells or the entire row.
Rep Name is Column J Row 5. I need to find multiple columns based by the header which is row 5, if column range (j5:az5) is "Video - Actual" then copy column to sheet "Data", this needs to be repeated for about 8 more times for different criteria
Rep NameBundle - TargetBundle - ActualVideo - TargetVideo - ActualJoe, Jane
2.06.06.04.0Smith, John
7.010.02.06.0Tucker, Chris
19.039.05.017.0Sandler, Adam
15.011.06.010.0Iglesias, Gabriel
8.03.06.010.5Smith, Will
8.03.06.06.5Powers, Austin
10.025.07.09.0
I have requirement to extact data into a spreadsheet. This data is extracted from CSV file which is huge normally over 7MB. I have found a macro on the internet which I have included with this post.
Sub split()
Dim ResultStr As String
Dim FileName As String
Dim FileNum As Integer
Dim Counter As Double
'Ask User for File's Name
FileName = InputBox("Please enter the Text File's name, e.g. test.txt")
'Check for no entry
If FileName = "" Then End
'Get Next Available File Handle Number
FileNum = FreeFile()
'Open Text File For Input
Open FileName For Input As #FileNum .................
I have also included reult data that I get after running the macro. I have cut down on data due to attachement restrictions. But usually there are multiple spreadsheets named "Sheet1, Sheet2, Sheet3 and so on". I have numerous requirements. First of all I want to be able to spreate data into columns. For now how I do that is by going to data -> text to columns and then selcting delmited and then selecting comma as my delimiter. Second thing I want to do is is only extract range of data from this output into a new worksheet. I am only interest in the name like for example ALBANY-Serial0/0/0 and data that is in the range of 8:00 AM to 6:00PM. So the new sheet should only have name and for that name data in the range of 8:00AM to 6:00PM for all the sheets "sheet1, sheet2 etc" until all data has been extracted.
Now what I am looking to do is search my spreadsheet for specific criteria and then copy and paste these rows of information to a new sheet.
In my first spreadsheet that I am using as a database, I want to be able to select any entry from the month and copy it to another spreadsheet named for that criteria.
In other words, I want to find every entry for January, copy just that data's rows and paste them to the January spreadsheet, February to February, etc. My date fields are in column A.
I also want to do the same with representatives names found in column B.
This will break down the data for each rep and each month. Using the filter, then copy and pasting would be cumbersome.
I have a workbook with many sheets of similar but not identical data. I need to extract columns from each sheet based on 5 header criteria and paste them to a single sheet. Each worksheet contains these 5 criteria.
I've been working with the VBA script I've pasted below. It's grabbing the 5 column criteria that I have in sheet 12, and comparing them to sheet 1 in the workbook, then copying them to sheet 12. This much is good, but I need the script to also return the data from the other worksheets as well. I've tried modifying the script based on other loop functions in other scripts I've found, but I'm not having any luck.
I have a workbook with 3 sheets
Sheet1 - TeamList - Column A is a list of all the team leaders which is used to create a new worksheet for every team. Col B is blank. Column C, D, E are the team lists where teams can consist of anywhere from 10-25 employees.
For example
Column A
Column B
Column C
Column D
Column E
Team Leaders
Team Leader
Employee
Pin
TL 1
TL 1
Emp 1
10001
[Code] ......
Sheet2 "RawHours" A raw data sheet that contains employee hours information
For Example
Employee #
PIN
NAME
Reg
OT
TRN
Stat
Sick
Vac
Berv
2000100
10001
Emp 1
24.00
0.00
[Code] .......
Sheet3 - Template
Basically what I want to be able to do is create a sheet for every team leader and copy and paste there team into the appropriate sheet.
I have the sheet create done by simply copying the template and renaming each sheet using the Team Leaders list from column A from the TeamList sheet. And then I copy the page setup information using the template as well but when it comes to pulling over the appropriate team members in to the appropriate sheet I can not seem to wrap my head around it.
Below is the current code I am using:
Code:
Option Explicit
Sub CreateSheet()
Dim LR, i As Long
Dim shCount As Integer
Dim Sh As Worksheet
Dim Cell As Range
Dim CpySht As PageSetup
[Code] ........
I am fairly new to macros and have trouble with VBA. I have a file with multiple worksheets. Each worksheet contains the name of a specific location in cell A8. I want this name in cell A8 to be the name on the worksheet tab for each worksheet in my file but do not know how to accomplish this. Is that even possible?
View 3 Replies View RelatedI am starting within a workbook with a standard invoice/form. During the course of a month this invoice will be copied 20 to 30 times within the workbook and the amounts changed each time. Is there a way that I can:
a) Have amounts from 2 of the cells (say E30 and E31) within each new invoice worksheet automatically included on a summary page? These cells are calculated by formula.
b) (This one would be nice but is not essential) Have each new invoice worksheet that is added (by copying) automatically numbered sequentially in a cell (say A2) and also re-named with this number. The first existing invoice would be manually numbered and each additional invoice would follow from there.
look for a certain value in worksheet A and copy that row of data to Worksheet B.
However, it seems to be only copying the row in worksheet A and pasting it. Is there something that a noob VBA scripter has missed out?
PHP Private Sub GetInfo_Click()
Dim r As Long, LastRow As Long, Status As Integer
Dim Message As String, Title As String, Default As String, MyValue As String
Application.ScreenUpdating = False
MyValue = Range("A4").Value
Workbooks("invoice.xls").Worksheets("A").Activate
LastRow = Range("C65536").End(xlUp).Row
For r = LastRow To 1 Step -1
If Cells(r, 1).Value = MyValue Then
Rows(r).EntireRow.Copy
Workbooks("invoice.xls").Worksheets("B").Activate
Rows("8").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Status = 1
Workbooks("invoice.xls").Worksheets("A").Activate
Rows(r).EntireRow.Delete
Exit For
End If
Next r
Application.ScreenUpdating = True
I have written code that allows a user to copy, via a button, a certain sheet any number of times. They can choose to copy that sheet 5 times and then 10 times, etc.
When the sheet tries to be copied for the 17th time, it fails with the following message: "Run-time error '1004':
Method 'Copy' of object '_Worksheet' failed"
Here is the code that I have. The second line is the line that is failing.
Worksheets("RoedForm").Select
Worksheets("RoedForm").Copy After:=Worksheets(iCount)
This always fails on the 17th copy regardless of how many different combinations of copy sheets the user tries. There are several sheets before the sheet that is to be copied and I have deleted several of those to see what happens and it still fails on the 17th copy. I also have 1GB of memory, so I don't believe that memory is an issue.
I have a workbook that contains 50 worksheets named 1-50. I need to add more worksheets. all the formulas in the worksheets always refers to the previous worksheet.
How can i make a copy of the worksheet named 50, name it 51 and have all the formulas in worksheet 51 refer back to worksheet 50?
OK, two files attached in the zipfile, pricelist-half.xls and pricelist-full.xls
The background is that i exported a file from our warehouse system so we could update prices and re-import it. That is the pricelist-half.xls
After our staff had spent a few days working on it, it came to light that (as the name suggests!) its only about half the products that should have been exported that are on the list.
Hence the second file, pricelist-full.xls which as its name suggests is the full
product list.
What I need to happen, to make this as painless as possible, is somehow for the items/rows that are on the full list, but not on the half list to be inserted to the half list but also have a yellow background for their rows so they stand out clearly.
I have two sheets in one workbook; one has a list of names in column A (136 of them) and another is a master list with all the names of people who work for the company (over 2000). Sheet 1 and Sheet 2 respectively. I need to populate columns B-E in Sheet 1 with the data in columns B-E in Sheet 2, but only for the names that match in column A. I've tried applying filters but can't get to the data I need for some reason. The names are formatted the same way in both sheets (Last, First). In Sheet 2 the names are links but in Sheet 1 they aren't; not sure if that's important.
View 7 Replies View RelatedI want to make a function that gets the range like. "A1:B9" And this function automatically gets the range when given criteria meet.
For example: I have a cell A1 with value 0 and next 0 value in cell A10. I want to put that function in C1. So this function returns me the range like " A1:B9"
I am having difficulty trying to consolidate a much larger version of the attached spreadsheet. I need to be able to have excel automatically add up the assets, based upon the firm ID. I have looked around and thought that SUMPRODUCT or SUMIF would work for what I need, but I've been unable to get either to work. I almost need to do a VLOOKUP and have it SUM at the same time.
View 3 Replies View RelatedI'm trying to make my spreadsheet to show next hidden row by entering a text or number on the cells in the range of my code. It works from rows 67 to 135 but I canot make it work with an additional ranges on it. if i insert the same instruction 'Private Sub Worksheet_SelectionChange(ByVal Target As Range)' it shows an error that said ambiguos name detected.?
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If RenglonAnt > 67 And RenglonAnt < 135 Then
If Range("C" & RenglonAnt).Value <> "" Then
Sheet1.Rows(RenglonAnt + 1).Hidden = False
End If
End If
If Target.Row > 67 And Target.Row < 135 Then
RenglonAnt = Target.Row
Else......................
I am trying to achieve the following and am not certain how to achieve this in Excel 2003.
1. make the Criteria Range Dynamic in Advance Excel, so that the Filter automatically updates on every Criteria change.
2. Raw Data range is kept in Closed workbook
3. Filtered Result displayed in another Workbook.
