Automaticly Populate Dates In Sequence Based Off Of One Cell
Jul 3, 2009
How do i get cells to automaticly populate dates in sequence based off of one cell. I.E C1= 4/Jul/09 I want A2-A7 to populate the dates in sequence Jul 4 - Jul 11. Is it a formate issue?
View 4 Replies
ADVERTISEMENT
Mar 22, 2014
I presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
This all needs to be done in Arial, 10pt, white.
View 10 Replies
View Related
Sep 24, 2009
Basic run down of spreedsheet. 2 diffrent sheets formated like a calendar. sheet one is to track minutes tardy for employees at work. Work sheet 2 is to document any weather or other issue that might arive to cause and employee to be tardy.
I have condintional formating set up to change the cells a diffrent color (on sheet 1) if the same day is flagged on sheet 2 as a exceptionalable day. What i want -
When i flag a day as a weather issue or other exceptionalable issue on sheet 2 i place a inserted comment with an explantion. I want this comment to auto transfer to the corrisponding cell in sheet 1 when i place it on sheet 2. I'm not sure if this is possible with Excel 03 but thought i'd ask.
View 3 Replies
View Related
Jul 31, 2013
I am trying to auto generate a calendar based on two drop down menus - Month and Year.
Once the month and year is selected I want to import all work orders onto the calendar based first on the "Labor Name" found in the list of work tab, then assign each work order for that labor name to the respective date on the calendar for the month.
August PM Schedule Demo.xlsx
View 2 Replies
View Related
Dec 2, 2013
I have a list of dates in column A as shown below & I want to get a count formula in column B for the # of dates in sequence. When the date sequence breaks a new count should be done at the end of the next sequence. The formula should be 1 I can put in cell B1 and copy down so that there are blanks & a count is only done at the end of the date sequence like in cell B4 or B7 below.
Col A Col B
Date Count
1 12-Oct
2 13-Oct
3 14-Oct
4 15-Oct4
5 17-Oct
6 18-Oct
7 19-Oct3
[Code]....
View 4 Replies
View Related
Oct 8, 2006
I'm need to add a droplist with periods 1,2,3,4 etc... that references a cell then populates that same reference in a cell raange. Example: cell E1 contains the droplist with periods 1-4 as choices to select from, when you select period 1 it populates the dates jan 15 in cells E4:E7, if you select period 2 it populates dates jan 31, etc. how to add the droplist, how to expand the list, show the formula and how to expand it as I will have more data than this short example.
View 3 Replies
View Related
Mar 25, 2014
I am trying to print a daily form for work. I want to include the day and date on each page, with the date changing for each copy. I would like to be able to input the start date, and then have each copy follow with sequential dates.
View 3 Replies
View Related
Apr 9, 2014
I am trying to populate a field in a Sheet 1 that is dependent on two other drop down fields that are chosen. Some of my data has the same names but different equipment.
Name
Equipment
Serial
Model
Jim Jones
snips
123
1AB
[Code] ....
Basically, I want to choose a name from say a drop down, then an equipment pc from drop down, and have the other field populate for say the Serial Number.
View 4 Replies
View Related
Oct 10, 2009
Is there a way to make a cell populate certain text based on conditions of other cells without putting the formula in the cell you want to populate. So that someone could type other text into the cell if the conditions were not met?
View 14 Replies
View Related
Mar 18, 2009
I have a macro that copies data from 6 different worksheets into one summary worksheet - based on certain criteria - I need a way to note on each row of the summary sheet which worksheet it was copied from. Each worksheet is specific to a salesperson, so ideally I would like that salespersons last name to populate in column B on the summary page for each row of theirs that is copied over....here is my current macro I use to copy the data: (this code is repeated for each sales persons sheet - "Blankenship", "Dew", etc...) I have attached a scaled down version of my file.
View 2 Replies
View Related
Aug 2, 2013
I have a list of teams, and beside them I need a calculation to be filled.
The criteria is based on a cell reference (a month which can be changed from a drop-down in BM2) and also the name of the team.
dummy 16.xls
View 5 Replies
View Related
Apr 6, 2013
I have a table in excel with some data to create labels, but these labels must be repeated according to the number of volumes. Example: I have a delivery for X and such delivery has 5 volumes, need to create 5 labels just changing the volume number: 1/5, 2/5, 3/5, 4​​/5 5/5.
I would enter a value in "D1" after running the code, in column "A" shall be filled as follows.
D1 = 7
A2 = 1/7
A2 = 2/7
A2 = 3/7
A2 = 4/7
A2 = 5/7
A2 = 6/7
A2 = 7/7
If "D1" equals 3 then
A2 = 1/3
A2 = 2/3
A2 = 3/3
View 4 Replies
View Related
Jul 7, 2014
I am currently trying to create a spreadsheet whereby if I enter certain text in a cell in Column A on worksheet 1 that correlates with text in a cell in Column A on Worksheet 2, then the description in Column B in Worksheet 2 is entered into Column B on worksheet 1.
For example, if worksheet 2 has the following:
Column A Column B
XXXX PRODUCT 1
YYYY PRODUCT 2
and I enter XXXX in column A on worksheet 1, I want Column B on worksheet 1 to automatically enter PRODUCT 1.
View 5 Replies
View Related
Apr 8, 2014
When I enter a value for 'Number of Steps' from a drop down a table is generated with the x values changing accordingly.
For example:
Number of Steps 5
x x^2
------------
0 0
1 1
2 4
3 9
4 16
Number of Steps 9
x x^2
------------
0 0
0.5 0.25
1 1
1.5 2.25
2 4
2.5 6.25
3 9
3.5 12.25
4 16
You will notice that the number of steps is the number of x values that take us up to 4. The 4 is fixed. I would be able to work out the maths myself as I am a maths teacher but I was wondering how I could autopopulate the table based on a drop down box selection. If it involves going into VBA then don't worry my son needs to get to grips with what I have done.
Edit. The formatting does not seem to work above. On the left of each table is supposed to be the x value and on the right is x^2.
View 7 Replies
View Related
Mar 5, 2009
I need to modify the code below:
PHP
Sub Macro1()
Macro1 Macro
Dim strbody As String
For Each cell In Range("B2:B640")
Sheets("MASTER").Select
Cells.Select
Selection.Copy
Sheets("Final Merged").Select
Sheets.Add
ActiveSheet.Paste
Next
End Sub
The code above is creating a new sheet for each different value in column B. I would also like to take that value and place on the newly created sheet in cell A17.
Also, how would I get the sheet to be ranamed to match the value in cell A17 of the newly created sheet?
View 3 Replies
View Related
Mar 18, 2009
I have a macro that copies data from 6 different worksheets into one summary worksheet - based on certain criteria - I need a way to note on each row of the summary sheet which worksheet it was copied from. Each worksheet is specific to a salesperson, so ideally I would like that salespersons last name to populate in column on the summary page for each line of theirs that is copied over....here is my current macro I use to copy the data: (this scrpit is repeated for each sales persons sheet - "Blankenship", "Dew", etc...)
View 5 Replies
View Related
Dec 7, 2006
I think the best thing is to take a look at the attached, then read what I'm looking for, as it would make more sense...
That being said: what I am looking to do is change cell L3 based on new criteria in cell M3.
Right now if B3=Stationery World then L3=Stationery.
What I then want to happen is if E3=Toner then M3=67200 which then has L3=Equipment Consumables and NOT stationery.
View 9 Replies
View Related
Jan 25, 2008
I found many examples on this forum of how one can pull in data from closed workbooks, or copy it and have it stored in the active sheet. So far so good, but I need a solution which would do the opposite - I need the macro to take a range of data form the active sheet store it in a closed workbook and save any changes in the target workbook without opening it.
View 2 Replies
View Related
Mar 17, 2009
Is there a way to run a macro automaticly on a closed work book every Friday ? I've found ways of doing this using on-open event but It made me wonder if this was possible.
View 9 Replies
View Related
May 12, 2014
I've attached an example workbook.
Trip Plan example.xlsx
I'm trying to work out how to have cells R11 - Rxx generate the correct date, based on the rest of the calculations.
Please note that the attached is a crude cut down version of the larger spreadsheet, for the purpose of highlighting my problem.
SO, if E7 is changed, subsequently the values in K11:Rxx will be respectively updated.
D12 and G12 are entered manually. (although I'll probably make these drop downs or date choosers at some point...)
Depending on the value in E7 and time in D12, the required break period is listed in K11: Kxx.
The time that these periods of rest are required to occur before is then calculated and listed in O11:Oxx.
I need R11:Rxx to calculated the appropriate date from these calculations, relative to the date in G12.
For example, the rest required in K11, is required on the same day, as such it need to populate with the value in G12.
However the rest required in K13:Kxx, is required by a time (O13:Oxx) on the following day - G12+1
In some case, this time variance could run over 2 or more days.
I figure it's got something to do with the value in D12 also including the date of 0/1/1900.
I'm happy to add hidden cells for formulas/results to work around it, as the end product will print as an A4 document, where many cells will be locked.
Would prefer not go with any VBA unless it's my only option as I haven't done any VBA stuff as yet.
NB (the value in P5 is static only in this example)
View 11 Replies
View Related
Mar 13, 2014
I have a column (A) with names, Column (B) with platoon numbers. On another sheet I have a table for each platoon and I want it to be populated with the names of each platoon indevidually. The names are alphabetically and the platoon numbers are mixed.
Column A Column B
Name Platoon
J Goodman 1
L Barns 7
H Law 1
B Aims 10
and so on....
I want all the names from platoon 1 to appear in the table for platoon 1. I have about 3000 members and 40 platoons.
View 3 Replies
View Related
Jan 19, 2009
Various Numbers Will Be in a drop-down List eg:
6718
0820
7141
0821
I need it to Be able to, When I Select '6718' from the drop down Menu
"375 CAN 2lB18 C/F D/COKE" will Appear in the Next Cell.
View 9 Replies
View Related
Mar 24, 2013
I have data in three columns
A B C
4.5 9.50 4.657
4.5 11.60 4.789
4.5 12.50 4.654
4.5 13.50 3.930
4.5 15.20 3.826
I need to be able to auto-populate the cell in column G based on values in columns A & B. If I type 4.5 in E2, and 13.50 in F2, G2 should auto-populate with the value from column C
E F G
4.5 13.50
View 2 Replies
View Related
May 14, 2008
I have three hidden columns (Text only) one column with Parts, then Description, then Cost. I have a pull down menu (i.e. Cell 3, A) listing all of the choices in the hidden Parts column. I want to automatically populate Cell 3, B with the corresponding Description when a Part is chosen from the pull down menu, and the same in another column for the Cost.
I am using Excel X for Mac, in OS 10.5.2
View 4 Replies
View Related
Jul 1, 2014
I want the numbers to increase based on the labels from a list, such as the first john chosen will get a 1 on the first cell on sheet 2, if john is chosen again the 2nd john will get a 2 on the next cell on sheet 2 and so on for the other names.
I tried to use IF(COUNTIF(D:D,D2)=1,LARGE(IF(D:D=D2,E:E)+1),1) but it didn't work out.
View 3 Replies
View Related
Feb 15, 2014
I want to populate the value of a specific cell based on the choices made from two other dependent validation lists.
I am attaching a workbook that explains what I need to do.
View 9 Replies
View Related
Nov 29, 2010
I'm creating a configuration tool for instrumentation that has several options. Many of these options are dependent on one another. To summarize, I need to:
*Conditionally lock cells (and populate with "N/A") OR allow selection from drop down list - the list exists, it's the locking and auto-population I'm struggling with
Example: If A1 = No, then B1 = "N/A" and is locked, else allow selection from drop down list in B1
View 3 Replies
View Related
Mar 31, 2014
I have a spreadsheet with data populated down column B. This size will vary from day to day so is there a macro I can run that will populate Column C with a formula based on their being data in the adjacent cell.
View 2 Replies
View Related
Jul 25, 2006
I'm trying to set up an auto sequence number(col A) based on a date entry (col B) as in the example below. The sequence number should reset to 0001 each time the date in Col B changes.
Col A Col B
072306-0001 07/23/06
072306-0002 07/23/06
072306-0003 07/23/06
072406-0001 07/24/06
View 5 Replies
View Related
Sep 18, 2006
I am stuck on what should be a simple formula. I have a spreadsheet that is sorted by "target" number in column A, basically 1,2,3,4. I am trying to create a formula that will increase the number in column B by one based on column A. So when the value in column A changes column B will reset to 1. Also I need this sequence number to be preceded by zeros up to 0999. So 1 would be 0001 and 895 would be 0895.
View 2 Replies
View Related