Populate Cell Based On Worksheet Name
Mar 18, 2009
I have a macro that copies data from 6 different worksheets into one summary worksheet - based on certain criteria - I need a way to note on each row of the summary sheet which worksheet it was copied from. Each worksheet is specific to a salesperson, so ideally I would like that salespersons last name to populate in column B on the summary page for each row of theirs that is copied over....here is my current macro I use to copy the data: (this code is repeated for each sales persons sheet - "Blankenship", "Dew", etc...) I have attached a scaled down version of my file.
View 2 Replies
ADVERTISEMENT
Mar 18, 2009
I have a macro that copies data from 6 different worksheets into one summary worksheet - based on certain criteria - I need a way to note on each row of the summary sheet which worksheet it was copied from. Each worksheet is specific to a salesperson, so ideally I would like that salespersons last name to populate in column on the summary page for each line of theirs that is copied over....here is my current macro I use to copy the data: (this scrpit is repeated for each sales persons sheet - "Blankenship", "Dew", etc...)
View 5 Replies
View Related
Dec 18, 2006
I have a master list of people. (call it master) I have 1 other worksheet that should contain everyone aged 15 and up (call it must progress). One of the columns on the master show's their ages. I was hoping excel would automatically populate the sheet based on the age from the master list. So, for example. On the Master list, Joe Smith is 17. I would like Each cell in the Joe Smith Row to automatically copy itself to the must progress worksheet because his age is over 15. The formula would be based off the age on the master.
View 2 Replies
View Related
Mar 24, 2014
I am working with a worksheet that has some cells merged e.g. A1 and A2 are merged together as 1 cell. I am using cell offset to reference values from the worksheet assign them to variables then populate another worksheet with their respective values. I noticed that cell.offset(row,column).value is not retrieving a value when merged cells are mixed with non-merged cells within a given row. Is there another method/function I can take advantage of here?
View 1 Replies
View Related
Apr 9, 2014
I am trying to populate a field in a Sheet 1 that is dependent on two other drop down fields that are chosen. Some of my data has the same names but different equipment.
Name
Equipment
Serial
Model
Jim Jones
snips
123
1AB
[Code] ....
Basically, I want to choose a name from say a drop down, then an equipment pc from drop down, and have the other field populate for say the Serial Number.
View 4 Replies
View Related
Oct 10, 2009
Is there a way to make a cell populate certain text based on conditions of other cells without putting the formula in the cell you want to populate. So that someone could type other text into the cell if the conditions were not met?
View 14 Replies
View Related
Aug 2, 2013
I have a list of teams, and beside them I need a calculation to be filled.
The criteria is based on a cell reference (a month which can be changed from a drop-down in BM2) and also the name of the team.
dummy 16.xls
View 5 Replies
View Related
Apr 6, 2013
I have a table in excel with some data to create labels, but these labels must be repeated according to the number of volumes. Example: I have a delivery for X and such delivery has 5 volumes, need to create 5 labels just changing the volume number: 1/5, 2/5, 3/5, 4​​/5 5/5.
I would enter a value in "D1" after running the code, in column "A" shall be filled as follows.
D1 = 7
A2 = 1/7
A2 = 2/7
A2 = 3/7
A2 = 4/7
A2 = 5/7
A2 = 6/7
A2 = 7/7
If "D1" equals 3 then
A2 = 1/3
A2 = 2/3
A2 = 3/3
View 4 Replies
View Related
Jul 7, 2014
I am currently trying to create a spreadsheet whereby if I enter certain text in a cell in Column A on worksheet 1 that correlates with text in a cell in Column A on Worksheet 2, then the description in Column B in Worksheet 2 is entered into Column B on worksheet 1.
For example, if worksheet 2 has the following:
Column A Column B
XXXX PRODUCT 1
YYYY PRODUCT 2
and I enter XXXX in column A on worksheet 1, I want Column B on worksheet 1 to automatically enter PRODUCT 1.
View 5 Replies
View Related
Apr 8, 2014
When I enter a value for 'Number of Steps' from a drop down a table is generated with the x values changing accordingly.
For example:
Number of Steps 5
x x^2
------------
0 0
1 1
2 4
3 9
4 16
Number of Steps 9
x x^2
------------
0 0
0.5 0.25
1 1
1.5 2.25
2 4
2.5 6.25
3 9
3.5 12.25
4 16
You will notice that the number of steps is the number of x values that take us up to 4. The 4 is fixed. I would be able to work out the maths myself as I am a maths teacher but I was wondering how I could autopopulate the table based on a drop down box selection. If it involves going into VBA then don't worry my son needs to get to grips with what I have done.
Edit. The formatting does not seem to work above. On the left of each table is supposed to be the x value and on the right is x^2.
View 7 Replies
View Related
Mar 5, 2009
I need to modify the code below:
PHP
Sub Macro1()
Macro1 Macro
Dim strbody As String
For Each cell In Range("B2:B640")
Sheets("MASTER").Select
Cells.Select
Selection.Copy
Sheets("Final Merged").Select
Sheets.Add
ActiveSheet.Paste
Next
End Sub
The code above is creating a new sheet for each different value in column B. I would also like to take that value and place on the newly created sheet in cell A17.
Also, how would I get the sheet to be ranamed to match the value in cell A17 of the newly created sheet?
View 3 Replies
View Related
Dec 7, 2006
I think the best thing is to take a look at the attached, then read what I'm looking for, as it would make more sense...
That being said: what I am looking to do is change cell L3 based on new criteria in cell M3.
Right now if B3=Stationery World then L3=Stationery.
What I then want to happen is if E3=Toner then M3=67200 which then has L3=Equipment Consumables and NOT stationery.
View 9 Replies
View Related
Jan 25, 2008
I found many examples on this forum of how one can pull in data from closed workbooks, or copy it and have it stored in the active sheet. So far so good, but I need a solution which would do the opposite - I need the macro to take a range of data form the active sheet store it in a closed workbook and save any changes in the target workbook without opening it.
View 2 Replies
View Related
May 12, 2014
I've attached an example workbook.
Trip Plan example.xlsx
I'm trying to work out how to have cells R11 - Rxx generate the correct date, based on the rest of the calculations.
Please note that the attached is a crude cut down version of the larger spreadsheet, for the purpose of highlighting my problem.
SO, if E7 is changed, subsequently the values in K11:Rxx will be respectively updated.
D12 and G12 are entered manually. (although I'll probably make these drop downs or date choosers at some point...)
Depending on the value in E7 and time in D12, the required break period is listed in K11: Kxx.
The time that these periods of rest are required to occur before is then calculated and listed in O11:Oxx.
I need R11:Rxx to calculated the appropriate date from these calculations, relative to the date in G12.
For example, the rest required in K11, is required on the same day, as such it need to populate with the value in G12.
However the rest required in K13:Kxx, is required by a time (O13:Oxx) on the following day - G12+1
In some case, this time variance could run over 2 or more days.
I figure it's got something to do with the value in D12 also including the date of 0/1/1900.
I'm happy to add hidden cells for formulas/results to work around it, as the end product will print as an A4 document, where many cells will be locked.
Would prefer not go with any VBA unless it's my only option as I haven't done any VBA stuff as yet.
NB (the value in P5 is static only in this example)
View 11 Replies
View Related
Mar 13, 2014
I have a column (A) with names, Column (B) with platoon numbers. On another sheet I have a table for each platoon and I want it to be populated with the names of each platoon indevidually. The names are alphabetically and the platoon numbers are mixed.
Column A Column B
Name Platoon
J Goodman 1
L Barns 7
H Law 1
B Aims 10
and so on....
I want all the names from platoon 1 to appear in the table for platoon 1. I have about 3000 members and 40 platoons.
View 3 Replies
View Related
Jan 19, 2009
Various Numbers Will Be in a drop-down List eg:
6718
0820
7141
0821
I need it to Be able to, When I Select '6718' from the drop down Menu
"375 CAN 2lB18 C/F D/COKE" will Appear in the Next Cell.
View 9 Replies
View Related
Mar 24, 2013
I have data in three columns
A B C
4.5 9.50 4.657
4.5 11.60 4.789
4.5 12.50 4.654
4.5 13.50 3.930
4.5 15.20 3.826
I need to be able to auto-populate the cell in column G based on values in columns A & B. If I type 4.5 in E2, and 13.50 in F2, G2 should auto-populate with the value from column C
E F G
4.5 13.50
View 2 Replies
View Related
Jul 3, 2009
How do i get cells to automaticly populate dates in sequence based off of one cell. I.E C1= 4/Jul/09 I want A2-A7 to populate the dates in sequence Jul 4 - Jul 11. Is it a formate issue?
View 4 Replies
View Related
May 14, 2008
I have three hidden columns (Text only) one column with Parts, then Description, then Cost. I have a pull down menu (i.e. Cell 3, A) listing all of the choices in the hidden Parts column. I want to automatically populate Cell 3, B with the corresponding Description when a Part is chosen from the pull down menu, and the same in another column for the Cost.
I am using Excel X for Mac, in OS 10.5.2
View 4 Replies
View Related
Feb 15, 2014
I want to populate the value of a specific cell based on the choices made from two other dependent validation lists.
I am attaching a workbook that explains what I need to do.
View 9 Replies
View Related
Nov 29, 2010
I'm creating a configuration tool for instrumentation that has several options. Many of these options are dependent on one another. To summarize, I need to:
*Conditionally lock cells (and populate with "N/A") OR allow selection from drop down list - the list exists, it's the locking and auto-population I'm struggling with
Example: If A1 = No, then B1 = "N/A" and is locked, else allow selection from drop down list in B1
View 3 Replies
View Related
Mar 31, 2014
I have a spreadsheet with data populated down column B. This size will vary from day to day so is there a macro I can run that will populate Column C with a formula based on their being data in the adjacent cell.
View 2 Replies
View Related
Mar 7, 2013
[URL]....When I select a name in column B, it populates column C's dropdown with that name's list of units. When I select a unity type in column C, I'd like it to automatically populate column E in the same row with the value associated with that unit. The values associated with a particular unit can be found to the right of the sheet. So if in row 2 I select Blake in column B, then Unit 5 in column C, I'd like column E to be populated with 14.
Edit: using Excel 2007.
I attached stripped down version of the sheet which is small enough to post. None of the things I removed should affect the topic at hand. The full sheet is available at rapidshare.
View 6 Replies
View Related
Aug 3, 2009
the post 5 for the actual issue. This being my first post could not update it correctly. I have put my views int he 5th post which will be more clear.
View 9 Replies
View Related
Sep 22, 2009
I need to populated a specific range of cells based on a value of any kind in a header cell. Attached is a sample of the end results. Please remember each header cells needs to determine what happens the range of cells below the header cells.
View 3 Replies
View Related
Dec 26, 2008
I am trying to populate a cell based on which number meets the criteria I define. This is based on sales revenue, so if the revenue is less than $6.5M, I want to use a certain value. If the value is equal to $6.5M but less than $8M I want to use another value and finally if the revenue is greater than $8M i want to use another value. Here's my formula, but it returns $0.
=IF(B2<6500000,Bonuses!J45)*OR((B2>6500000)*AND(B2<8000000),Bonuses!F45)*OR(B2>=8000000,Bonuses!B45)
View 5 Replies
View Related
Jul 11, 2012
I have to complete information providing dates and names for a long number of individuals. Is it possible to set up the spreadsheet so that if you enter a date next a persons details in on worksheet their information is automatically updated in the relevant ones?
View 2 Replies
View Related
Nov 26, 2012
How do I populate a second worksheet with only the preselected highlighted rows of cells from another worksheet.
This way I will end up with only the selected data from the first worksheet in the second worksheet.
View 9 Replies
View Related
Aug 13, 2014
I have a 'Summary' worksheet which is shown as:
August
September
October
Example 1
1
4
5
The table, which works correctly, looks in another worksheet 'Report' for 'Example 1' within the date range of August. This uses COUNTIFS.
Ideally, what I'm wanting to do is have an auto-filter on each of the cells - 'Example 1', 'Example 2', so if a user wants to see what rows on the 'Report' sheet, falls into this criteria, it auto filters the other worksheet, and takes them too it.
The action would be - Click on the cell of 'Example 1', the macro auto-filters based on the cells value in column F of the 'Report' sheet, and takes the user there. The macro would have to take into account the date filter as well, which uses cells A1,B1 for August, and C1,D1, for September.
View 1 Replies
View Related
Feb 14, 2014
I have my training file that is currently set up and working how I want it to, however I would like to go one step further if it's possible.
on the FIRE EXTINGUISHER TRAINING column there is one person out of date and 14 people that need the training, how can I populate all the name that need this training onto sheet 1 into the box that I have created. I'm wanting this to happen automatically so I don't have to retype the name onto this sheet.
View 14 Replies
View Related
