Populate Cells Based On Value Of Another Cell?
Apr 6, 2013
I have a table in excel with some data to create labels, but these labels must be repeated according to the number of volumes. Example: I have a delivery for X and such delivery has 5 volumes, need to create 5 labels just changing the volume number: 1/5, 2/5, 3/5, 4​​/5 5/5.
I would enter a value in "D1" after running the code, in column "A" shall be filled as follows.
D1 = 7
A2 = 1/7
A2 = 2/7
A2 = 3/7
A2 = 4/7
A2 = 5/7
A2 = 6/7
A2 = 7/7
If "D1" equals 3 then
A2 = 1/3
A2 = 2/3
A2 = 3/3
View 4 Replies
ADVERTISEMENT
May 12, 2014
I've attached an example workbook.
Trip Plan example.xlsx
I'm trying to work out how to have cells R11 - Rxx generate the correct date, based on the rest of the calculations.
Please note that the attached is a crude cut down version of the larger spreadsheet, for the purpose of highlighting my problem.
SO, if E7 is changed, subsequently the values in K11:Rxx will be respectively updated.
D12 and G12 are entered manually. (although I'll probably make these drop downs or date choosers at some point...)
Depending on the value in E7 and time in D12, the required break period is listed in K11: Kxx.
The time that these periods of rest are required to occur before is then calculated and listed in O11:Oxx.
I need R11:Rxx to calculated the appropriate date from these calculations, relative to the date in G12.
For example, the rest required in K11, is required on the same day, as such it need to populate with the value in G12.
However the rest required in K13:Kxx, is required by a time (O13:Oxx) on the following day - G12+1
In some case, this time variance could run over 2 or more days.
I figure it's got something to do with the value in D12 also including the date of 0/1/1900.
I'm happy to add hidden cells for formulas/results to work around it, as the end product will print as an A4 document, where many cells will be locked.
Would prefer not go with any VBA unless it's my only option as I haven't done any VBA stuff as yet.
NB (the value in P5 is static only in this example)
View 11 Replies
View Related
Oct 10, 2009
Is there a way to make a cell populate certain text based on conditions of other cells without putting the formula in the cell you want to populate. So that someone could type other text into the cell if the conditions were not met?
View 14 Replies
View Related
Nov 29, 2010
I'm creating a configuration tool for instrumentation that has several options. Many of these options are dependent on one another. To summarize, I need to:
*Conditionally lock cells (and populate with "N/A") OR allow selection from drop down list - the list exists, it's the locking and auto-population I'm struggling with
Example: If A1 = No, then B1 = "N/A" and is locked, else allow selection from drop down list in B1
View 3 Replies
View Related
Mar 31, 2014
I have a spreadsheet with data populated down column B. This size will vary from day to day so is there a macro I can run that will populate Column C with a formula based on their being data in the adjacent cell.
View 2 Replies
View Related
Sep 22, 2009
I need to populated a specific range of cells based on a value of any kind in a header cell. Attached is a sample of the end results. Please remember each header cells needs to determine what happens the range of cells below the header cells.
View 3 Replies
View Related
May 23, 2014
I am trying to build a staff roster. The staff rotate over a 4 week cycle. the name of the staff member, and their shift needs to be looked up from the key then matched with the particular week. the name and shift then need to populate specific cells.
I have attached the worksheet so you can see what i am trying to achieve.
View 2 Replies
View Related
May 27, 2014
The file is attached here. I would like to be able to autopopulate cells based on a dropdown. The first tab has the final report and the other 2 tabs are the raw files.
KMPH_Inventory.xlsx‎
View 1 Replies
View Related
Jul 6, 2014
I am looking for a VBA that could populate from column (A2:A5) to cells (B2:F5) as in the attached spreadsheet, based on the frequency, in a five year time-frame.
screen_print.JPG
[Code] .....
View 1 Replies
View Related
Feb 24, 2010
I run this macro that populates 7 cells based on data in another sheet. It seems that every sheet that have formulas that point to this sheet are being stuck in in the screen updating somehow?
Basically when I press F9 to calculate or change any cell that makes the sheet calculate it has like a screen burn in of all the sheets that are being calculated. I have been able to use this as a workaround:
Private Sub Workbook_SheetCalculate(ByVal Sh As Object)
Application.ScreenUpdating = True
End Sub
But I shouldn't have to do this and it slows it down as it runs through this specific code about 11 times for each sheet that is re-calculating. Something is getting stuck in memory or something that seems to be causing this issue. This is the code I am using and I am not selecting any cells or sheets, but it appears that when I walk through the code that an image of the sheet comes up on the screen? The code in red seems to be what is causing the issues, but I do not know why? I can pass the 2 workbooks along to someone so they can see the behavior if they would like? Just let me know.
Sub populateEmployeeData()
Dim srcWorkbook As Workbook
Dim foundEmployee As Range
Dim srcWorkbookName As String
srcWorkbookName = "XIP_Employee_Data_" & Left(ActiveSheet.Range("B9").Value, 31) & "_" & Format(ActiveSheet.Range("B10").Value, "MMMDDYYYY") & ".xlsx"
If IsWorkBookOpen(srcWorkbookName) Then..........................
View 9 Replies
View Related
Oct 13, 2009
What formula do I use to populate certain cells (E5:E10 and J5:10) based on match with condition (E3) with cells from and in the ranges C2:C73 and D2:D73 without creating milelong IF formulas? I am almost at the goal... past 10pm here in Thailand and still at the office
View 2 Replies
View Related
Jun 26, 2013
I am having a hard time searching for this formula.
Sheet1 has the following data in A1:A5
value1
value2
value3
value4
value5
I then have 5 additional sheets.
I want to populate cell D2 on each additional sheet with the values from Sheet1
Sheet2 - Value1 in "D2"
Sheet3 - Value2 in "d2"
and so on...
View 4 Replies
View Related
Apr 25, 2008
I am attempting to populate a row of several cells on a worksheet using a drop-down list, using data from a seperate worksheet in the same workbook. The worksheet containing the data will be hidden (I do not think that matters in this case). Do I place a VLOOKUP function in the first worksheet cells? see attached sample
DropDownSample.xls
As a follow-up question, as time goes by, the data in the source worksheet will be appended with new items (additional rows of data). As each new item is added, will I need to edit the formulas, or is there a way for Excel to dynamically add the new data? This might be stretching my wish list a bit but I thought I'd ask.
View 3 Replies
View Related
Mar 10, 2014
Is it possible to be able to select a range of dates, and a time interval, and then to automatically fill in cells in a column? to be more specific, I want to be able to select, say 1 Jan 2013 to 31 dec 2013 in one box, then specify a time interval, for example "hourly" and then a column is populated with each interval, i.e. 1 jan 2013 00:00, and then the next one is 1 jan 2013 01:00 etc. I have tired the normal automatic fill tool but it never seems to get it right. It works for the first few days then it all goes funny.
View 3 Replies
View Related
Aug 5, 2009
wish to write an VB macro in Excel (2003) that populates a 6 row by 10 column matrix (for a 3 D graph) by inserting values from matrix row column headers in cells in another worksheet and using goal seek to derive a value which will be pasted in the respective cell in the 6X10 matrix
Specific example: Matrix (Row Headers A2 to A7, Column Headers B1 to K1, Cell values are in B2 to K7). Please note row and column headers are numerical values since this is for a 3D graph
Macro to be written
Pick a value (numerical) from row header A3 in Sheet A and paste it in cell B6 in another sheet (Sheet B). Pick anothet value (numerical) from column header D1 in Sheet A and paste it in cell B7 in Sheet B.
Run a goal seek scenario such that cell S10 in sheet B is equal to 50 by changing cell G8 in Sheet B
Copy the value chosen/optimised by Goal Seek from cell G8 in Sheet B and paste it in Cell D3 (which is the relevant cell for the values for intersection of headers A3 and D1) in Sheet A
Macro should populate all cells in the matrix in Sheet A (matrix cells to be populated are B2 to K7) in a similar fashion
The macro should be locked in to the cells which are either being copied from or pasted into so that it still references them even if new columns or rows are inserted.
View 10 Replies
View Related
Apr 9, 2014
I am trying to populate a field in a Sheet 1 that is dependent on two other drop down fields that are chosen. Some of my data has the same names but different equipment.
Name
Equipment
Serial
Model
Jim Jones
snips
123
1AB
[Code] ....
Basically, I want to choose a name from say a drop down, then an equipment pc from drop down, and have the other field populate for say the Serial Number.
View 4 Replies
View Related
Mar 18, 2009
I have a macro that copies data from 6 different worksheets into one summary worksheet - based on certain criteria - I need a way to note on each row of the summary sheet which worksheet it was copied from. Each worksheet is specific to a salesperson, so ideally I would like that salespersons last name to populate in column B on the summary page for each row of theirs that is copied over....here is my current macro I use to copy the data: (this code is repeated for each sales persons sheet - "Blankenship", "Dew", etc...) I have attached a scaled down version of my file.
View 2 Replies
View Related
Aug 2, 2013
I have a list of teams, and beside them I need a calculation to be filled.
The criteria is based on a cell reference (a month which can be changed from a drop-down in BM2) and also the name of the team.
dummy 16.xls
View 5 Replies
View Related
Jul 7, 2014
I am currently trying to create a spreadsheet whereby if I enter certain text in a cell in Column A on worksheet 1 that correlates with text in a cell in Column A on Worksheet 2, then the description in Column B in Worksheet 2 is entered into Column B on worksheet 1.
For example, if worksheet 2 has the following:
Column A Column B
XXXX PRODUCT 1
YYYY PRODUCT 2
and I enter XXXX in column A on worksheet 1, I want Column B on worksheet 1 to automatically enter PRODUCT 1.
View 5 Replies
View Related
Apr 8, 2014
When I enter a value for 'Number of Steps' from a drop down a table is generated with the x values changing accordingly.
For example:
Number of Steps 5
x x^2
------------
0 0
1 1
2 4
3 9
4 16
Number of Steps 9
x x^2
------------
0 0
0.5 0.25
1 1
1.5 2.25
2 4
2.5 6.25
3 9
3.5 12.25
4 16
You will notice that the number of steps is the number of x values that take us up to 4. The 4 is fixed. I would be able to work out the maths myself as I am a maths teacher but I was wondering how I could autopopulate the table based on a drop down box selection. If it involves going into VBA then don't worry my son needs to get to grips with what I have done.
Edit. The formatting does not seem to work above. On the left of each table is supposed to be the x value and on the right is x^2.
View 7 Replies
View Related
Mar 5, 2009
I need to modify the code below:
PHP
Sub Macro1()
Macro1 Macro
Dim strbody As String
For Each cell In Range("B2:B640")
Sheets("MASTER").Select
Cells.Select
Selection.Copy
Sheets("Final Merged").Select
Sheets.Add
ActiveSheet.Paste
Next
End Sub
The code above is creating a new sheet for each different value in column B. I would also like to take that value and place on the newly created sheet in cell A17.
Also, how would I get the sheet to be ranamed to match the value in cell A17 of the newly created sheet?
View 3 Replies
View Related
Mar 18, 2009
I have a macro that copies data from 6 different worksheets into one summary worksheet - based on certain criteria - I need a way to note on each row of the summary sheet which worksheet it was copied from. Each worksheet is specific to a salesperson, so ideally I would like that salespersons last name to populate in column on the summary page for each line of theirs that is copied over....here is my current macro I use to copy the data: (this scrpit is repeated for each sales persons sheet - "Blankenship", "Dew", etc...)
View 5 Replies
View Related
Dec 7, 2006
I think the best thing is to take a look at the attached, then read what I'm looking for, as it would make more sense...
That being said: what I am looking to do is change cell L3 based on new criteria in cell M3.
Right now if B3=Stationery World then L3=Stationery.
What I then want to happen is if E3=Toner then M3=67200 which then has L3=Equipment Consumables and NOT stationery.
View 9 Replies
View Related
Jan 25, 2008
I found many examples on this forum of how one can pull in data from closed workbooks, or copy it and have it stored in the active sheet. So far so good, but I need a solution which would do the opposite - I need the macro to take a range of data form the active sheet store it in a closed workbook and save any changes in the target workbook without opening it.
View 2 Replies
View Related
Mar 13, 2014
I have a column (A) with names, Column (B) with platoon numbers. On another sheet I have a table for each platoon and I want it to be populated with the names of each platoon indevidually. The names are alphabetically and the platoon numbers are mixed.
Column A Column B
Name Platoon
J Goodman 1
L Barns 7
H Law 1
B Aims 10
and so on....
I want all the names from platoon 1 to appear in the table for platoon 1. I have about 3000 members and 40 platoons.
View 3 Replies
View Related
Jan 19, 2009
Various Numbers Will Be in a drop-down List eg:
6718
0820
7141
0821
I need it to Be able to, When I Select '6718' from the drop down Menu
"375 CAN 2lB18 C/F D/COKE" will Appear in the Next Cell.
View 9 Replies
View Related
Mar 24, 2013
I have data in three columns
A B C
4.5 9.50 4.657
4.5 11.60 4.789
4.5 12.50 4.654
4.5 13.50 3.930
4.5 15.20 3.826
I need to be able to auto-populate the cell in column G based on values in columns A & B. If I type 4.5 in E2, and 13.50 in F2, G2 should auto-populate with the value from column C
E F G
4.5 13.50
View 2 Replies
View Related
Jul 3, 2009
How do i get cells to automaticly populate dates in sequence based off of one cell. I.E C1= 4/Jul/09 I want A2-A7 to populate the dates in sequence Jul 4 - Jul 11. Is it a formate issue?
View 4 Replies
View Related
May 14, 2008
I have three hidden columns (Text only) one column with Parts, then Description, then Cost. I have a pull down menu (i.e. Cell 3, A) listing all of the choices in the hidden Parts column. I want to automatically populate Cell 3, B with the corresponding Description when a Part is chosen from the pull down menu, and the same in another column for the Cost.
I am using Excel X for Mac, in OS 10.5.2
View 4 Replies
View Related
Jan 24, 2014
I need to be able to populate a cell with text from 3 possible cells, two will have the text "none" in them, the other text cell is the one i need to populate in another cell.
View 3 Replies
View Related
