consider that I have two columns of data with say five rows each. Column A contains company names (say Company A,B or C). Column B contains revenue that I'd like to average. However, I want to exclude revenue from one of the companies (say Company C). Keep in mind that my actual number of rows is in the thousands, so manually picking the rows to average is not a viable solution.
View 9 RepliesHere is the first required formula, which will go in cell P7:
If N7>=75 a value of "Y" should be returned. If not, a value of "N" should be returned. BUT if N7 is blank, a blank should be returned.
Here is the second required formula, which is more complicated, and will go in cell Q7:
(1) If Cell P7="Y", then a "Y" needs to be returned in the cell.
(2) If Cell O7>=2, then a "Y" needs to be returned in the cell. If not, then a "N" needs to be returned.
(3) If Cell P7 is blank, then the cell needs to remain blank.
Here is the final formula, which will go at the bottom of the page.
I need the Q column to return an average of the number of "Y" values, not counting the blanks as numbers. (For instance, if there were 18 "Y"s, 2 "N"s, and one blank, the value returned would be 0.90.).
The data:
There are a number of columns, but we'll use the first 2 first. Column A has the dates from 1/1/2009 to 12/31/2009. Column B will has numbers, mainly 0-100. One cell will have a 'report date' which is just a date.
The formula needed:
I have a few cells labeled wk1, wk2, wk3. Week 1 will start with the 'report' date. wk1 I would like the Average of Column B IF the dates in Column A are within the 'wk'. wk1 = report date TO report date + 6. wk2 = report date + 7 TO report date + 13 and so on.
My goal is to have the formulas all set so that when we move to another report date and the raw data is added, I can just change the 'report date' and everything (the wk numbers) will automatically update with the new raw data.
The furthest I got was this, but it didn't work.
=AVERAGE(IF('A3:A33>=VALUE(D3)
I have three IF statements as below. the problem is if the first statement is true I want it to skip the next two statements or the result will be changed again.
View 2 Replies View RelatedSheet one will contain the following:
DATE A B C D E
2/22/2008TRUEFALSEFALSEFALSERon
2/23/2008FALSETRUETRUETRUEPhill
2/24/2008FALSETRUEFALSEFALSETracy
2/25/2008FALSEFALSEFALSEFALSESharon
2/26/2008TRUETRUEFALSETRUEBill
On sheet two I need to list any date that has three or more true statements with the coresponding name.
EXAMPLE:
2/23/2008Phill
2/26/2008 Bill
How can I combine the two below statements like these to make one "Or Statement"? Sorry...I haven't done excel and/or's in forever?
=IF(('Proj Info'!L10="main")*AND('Proj Info'!L9="CT"),"BMSVC",'Proj Info'!L9)
OR
=IF(('Proj Info'!L10="serv")*AND('Proj Info'!L9="CT"),"BMSVC",'Proj Info'!L9)
E11 through E24 contains numbers and a few errors (#N/A) that need to persist (the errors need to show).
E10 needs to show the average of the numbers that are in E11 through E24, and just ignore the errors.
I have many columns like that - where the errors need to show and I need to show an average of the number/values that do appear, ignoring the errors.
i have two columns...a and b (a w/ names, and b w/grades). then i have the table lookup with names and grades all mixed up for many rows. i want to be able to average the grades with appropriate names.
=average(vlookup(name, table, column, false))?? i don't get it to work and how can i specify the grade to average?
TotHCInv.Value = WorksheetFunction. Sum(KRInv, PBLInv, CRInv, PVInv)
If i >= 34 Then CPSCtphRMA.Value = WorksheetFunction.Average("G" & (i - 30) & ":G" & i)
The first line runs properly, but the second line bugs out with the error message "Unable to get the Average property of the WorksheetFunction class". I can simply do the math, but I thought that using the worksheet function would be easier than summing and dividing. I'm curious, though, as to why I can't seem to use the Average function.
Can I get a minimum average and a maximum average, I have a worksheet with days of supply for 100 stores with about 100-200 products each, the dos resides in column D.
I was going to create a summary page and reference column d.
The following just gives me the min, I want the min average if possible:
I am attempting to calculate Grade point averages for my students for all classes. There are 5 columns of grades to be considered. I frist assign values of 0-5 to the grades then average the points. My problem is that I want the AVERAGE to ignore the zero but it calculates it as well. (I enter a 0 if I have no grade for that class.) I have tried the{ } to make it an array formula but this also did not work. Here is what I have, can anyone help?
=SUM(AVERAGE(IF(AND(L2>89,L2<100),5,IF(AND(L2<90,L2>79),4,IF(AND(L2>69,L2<80),3,IF(AND(L2<70,L2>59), 2,IF(AND(L2>0,L2<60),1,0))))),IF(AND(T2>89,T2<100),5,IF(AND(T2<90,T2>79),4,IF(AND(T2>69,T2<80),3,IF( AND(T2<70,T2>59),2,IF(AND(T2>0,T2<60),1,0))))),IF(AND(AB2>89,AB2<100),5,IF(AND(AB2<90,AB2>79),4,IF(A ND(AB2>69,AB2<80),3,IF(AND(AB2<70,AB2>59),2,IF(AND(AB2>0,AB2<60),1,0))))),IF(AND(AJ2>89,AJ2<100),5,I F(AND(AJ2<90,AJ2>79),4,IF(AND(AJ2>69,AJ2<80),3,IF(AND(AJ2<70,AJ2>59),2,IF(AND(AJ2>0,AJ2<60),1,0))))) ,IF(AND(AR2>89,AR2<100),5,IF(AND(AR2<90,AR2>79),4,IF(AND(AR2>69,AR2<80),3,IF(AND(AR2<70,AR2>59),2,IF (AND(AR2>0,AR2<60),1,0)))))),-1)
I know it is huge. The syntax is correct. It calculates the average, but always for all 5 columns. It will not ignore a 0 in a column.
I'm using the formula =AVERAGE(B16:L16) to give me the average.
However I have a couple of problems with this. Firstly I would like to exclude the value zero from the average. Secondly to also ignore the lowest and highest values.
Example, if the values in the cells are 0,1,2,3,4,5,6,7,8,9,10 then the current result shows 5, by ignoring the 0 and lowest value 1 and highest value 10 the average should be 4.5.
Ok, I for some reason just cant wrap my head around this. I need to to get the average time per call of two rows, but they are based on how many calls taken.
so in one column i have 50168 calls taken at 4:21 seconds per call. and in the next row i have 597 calls taken at 5:20 per call. I need to see what the new average will be with them combined, and I need it to display in m:ss form.
My formula is not working correctly; not sure what to do. I use this same formula with numbers and it seem to work, but only have 8 IF statements as well. This example below doesn't even work with only 8 IF statements.
--------------------------------------------------
What I am saying below is = If E3 = a swat team (i.e. EO-Deal Processing-Prescreen) then please enter "Chumbley" and so on. For anything else put an na or n/a for blanks or swat teams that I haven't lised in the criteria.
---------------------------------------------------
=IF(E3="EO-Deal Processing-Prescreen",Chumbley,IF(E3="EO-Deal Processing-DocGen",Chumbley,IF(E3="EO-Deal Processing-Events",Chumbley,IF(E3="EO-Deal Processing-Triage",Junk,IF(E3="EO-Deal Processing-Processing",Queck,IF(E3="EO-Deal Processing-Calcs",Doyle,IF(E3="EO-Deal Processing-Closing",Terry,IF(E3="EO-Deal Processing-D11B",Blazier,IF(E3="EO-Deal Processing-Isolated UI",James,na)))))))))
a = Range("d1").CurrentRegion.Resize(,2).Value
and
Range("G1").Resize(n,2).Value = b
what do the above two lines of code do?
I have the following:
=IF(I8>=G8,IF(I8
if-and-else statement in vb.
I made a combo box where the user selects a part in a combo box and I want the part selected to be stored in a certain cell. The first selection would be stored in C15 and if thats not empty then in D15 and if thats not empty then in E15 and if thats not empty then in F15.
Dim m As Integer
m = cboPart.ListIndex
If m = 0 Then
If IsEmpty(ActiveCell.Range("C15")) = True Then
ActiveCell.Range("C15") = cboPart.Value & vbLf & "Name: " + txtName
Else
ActiveCell.Range("D15") = cboPart.Value & vbLf & "Name: " + txtName
End If
Else
If IsEmpty(ActiveCell.Range("D15")) = False Then
ActiveCell.Range("E15") = cboPart.Value & vbLf & "Name: " + txtName
Else
ActiveCell.Range("F15") = cboPart.Value & vbLf & "Name: " + txtName
End If
End If
When I run this if-and-else statement it stops storing the selected data after the following:
If IsEmpty(ActiveCell.Range("C15")) = True Then
ActiveCell.Range("C15") = cboPart.Value & vbLf & "Name: " + txtName
Else
ActiveCell.Range("D15") = cboPart.Value & vbLf & "Name: " + txtName
End If
I got a 2 columns (A:B) with values in workbook1 (survey2.xlsm)
I want to open a sheet named according to values from column A wb1 in workbook2 (du_database2)
And I want to fill in the offset values (column B) in the aproppriate sheet
I wrote this sub for it. I am having troubles with the for each statements (how do I set them up properly?). The script itself hasn't been checked might also been wrong there.
VB:
Sub copytest()
'by J
Dim ws As Worksheet
Workbooks.Open "survey2.xlsm"
Application.Workbooks("du_database2.xlsm").Activate
[Code] .....
I'm using vlookups within IF statements to look in a number of various speadsheets depending on what the lookup value is.
So for example,
Formula:
This works well enough however I need some look up values to look in multiple spreadsheets as the data is split out between several spreadsheets. So for example, if B1=Hello I want to vlookup to 2 different spreadsheets.
I know I could do two instances of a vlookup within the formula, both for "hello" but looking to different spreadsheets. But doesn't this mean that if the first vlookup finds the value, the second one will overright it with an "#N/A" if it doesn't find it?
I have 2 conditions that I need to apply.
View 3 Replies View RelatedI need to write IF statement with 4 criteria, or at least I think IF will do the trick. It would be difficult and not very visual to describe my question here, therefore I have attached a dummy workbook with the comments. Basically I have got 2 values in 2 columns. Next 2 columns will hold letter "x". There are 4 possible variations how "x" will appear in those two columns: first, second, both or none. So depending where the "x" is, I need to return one of the 2 values.
View 6 Replies View RelatedI have various 6 x 6 blocks which contain just numbers, in another part of the spread sheet I have a 1 x 6 block of numbers. What I need to do is to check whether any of the numbers in the 1 x 6 block appear in any of the 6 x 6 blocks.If that does occur then I want to make a specific cell increase by the times that the match happens.using HLookup but just got errors and the If Statement, although did work, went on and on and on.
View 6 Replies View RelatedI have a list of dates and I need to calculate how many of the dates are before or between certain dates. I can't quite get my parameters correct.
I'm having trouble joining the followinf IF Statements. They work independently, however, I cannot get them to work in the same Cell.
Any help would be greatly appreciated.
=IF(A9="YES", SUM(A15+A21),"0")
=IF(B9="YES", SUM(B15+B21), "0")
I am new to this thread and hope you can find the time to help me. I am using excel to look up data manually entered in Widgets, Gidgets, Lidgets fields to find an exact match in an array and return the value in "field 1" with no luck. My lookup formula should return "9" from the Field 1 column.
Data Entry:
Widgets3
Gidgets6
lidgets5 ........
I need to write an IF statement that exceeds the 8 statement maximum. Basically, what I want to say is: IF(U2>K2,1,IF(U2+V2>K2,2.........all the way up to U2...AM2>K2,19)
View 13 Replies View RelatedI've attached the workbook to make this easier. If you look at the file master.xls you will see 2 tabs. On the Tool tab I've highlighted some blue cells and some rose cells. If you look at the blue cell G68 there is a long formula that reads up to 3 cells from the Specs tab and then plugs in the correct data from the blue cells on the right side of the Tools tab page. I need the rose cell F69 to do the same thing only with the data from the rose cells to the right. When I try and duplicate the fromula from G68 into F69 I get errors. I hope I made this clear enough. The formula in G68 is long, is there a way to shorten it? Also sometimes in this workbook when I try to type a formula in a cell I get the text I typed instead of the formula. For example I might enter in A1, =B2. Instead of getting the data from B2, it reads =B2. I've looked at how the cell is formatted but can't get it to work.
View 3 Replies View RelatedTrying the following multiple if formula, however it only works for my first if statement and not the rest.
=(IF(G21="onl",WORKDAY(E21,L27,K26:K43),(IF(G21="telb",WORKDAY(G21,L27,K26:K43),(IF(G21="mrt",WORKDA Y(G21,L27,K26:K43),(IF(G21="tlr",WORKDAY(G21,L26,K26:K43),(IF(G21="atm",WORKDAY(G21,L26,K26:K43),(IF (G21="chq",WORKDAY(G21,L26,K26:K43),(IF(G21="crcdwu",WORKDAY(G21,L28,K26:K43)))))))))))))))
I'm hoping someone can help me sort this out. I have a formula I need te determine if a TAT was 'met' or 'missed' and it has multiple criteria. Here is the formula I am trying to get to work:
=IF(AND(I2="Amendments",F2<=3,IF(AND(I2="Renewals",F2<=1,OR(D2<=G2)))),"Met",IF(F2="n/a","n/a","Missed"))
I've been able to get separate pieces of the formula to work correctly, example:
=IF(AND(F2<>"n/a",I2="Amendments",F2<=3,OR(D2<=G2)),"Met",IF(F2="n/a","n/a","Missed"))
but when I try to combine everything into one string I can not get it to work.
I know the concept of Case statements sounds simple, but trying to write it in my scenario seems a lot more difficult than I thought it would be. I have three columns with an unspecified number of rows (which are generated from another macro). Lets say those colums are C, D, E, and they should be strings because my criteria are based on the number of digits contained in each cell. I want to add a certain number of periods to a given cell, then add that string onto two other cell strings, and form one combined string in a separate cell.
Basically I want to sort of Concatenate the cells into a given cell in column F for each row, but there are many conditions. If the cells in column C contain 3 digits, I want to add one period "." onto the original string. If it has 4 digits, then I add nothing, and then, add that cell to the string in cell D, and then Cell E. [It is like the function Concatenate(C1&".",D1&"..",E1)]. Cells in Column D have 6 criteria, and cells in Column E have zero criteria.
And I need this to loop down until it reaches an empty row or cells.