Breaks The Code And Did Not Continue The Search

Jul 17, 2009

when the information cannot be found, it breaks the code and did not continue the search.

View 6 Replies


ADVERTISEMENT

Can Code Continue The Summing

May 16, 2009

*

A

B

C

D

E

F

1

DATA1

DATA2

SUM A+B

DATA3

DATA4

SUM D+E

2

The code I have here which sums row A and B in column C as shown in the table above And finish.


Sub Sum_Rows_1()

Dim LastRow As Long
Dim iRow As Long
Dim iCol As Integer
LastRow = 0

Is it possible code continue the summing up of row D and E in column F?

View 9 Replies View Related

Code To Add Rows And Continue Formulas

Jan 25, 2014

I am looking to create a userform to add new rows to a sheet, and continue the formulas in certain columns.

The user starts by entering a number in the text box tbRowAdd. When the user clicks on the button called btAdd it first checks to make sure the number entered is equal to or between 1 and 1500. If this is not the case it should display a message box saying "You must enter a valid number from 1 to 1500 in the tex box."

If the number is valid it should then add that amount of rows below the current active cell in the worksheet ReturnData.

It should then continue the formulas in the A, B, C and F columns. The formulas are as follows:

A: =IFERROR(IF($D6="", "", ROW($A6)-ROWS($A$1:$K$5)),"")

B: =IFERROR(RANK($C6,$C$6:$C$99986, 1),"")

C: =IFERROR(IF(OR(AND(ReturnData!$D6>=Search!$E$1, ReturnData!$D6<=Search!$E$2),OR(Search!$E$1="", Search!$E$2="")), IFERROR(SEARCH(Search!$E$3,$E6,1),"")-(-IFERROR(SEARCH(Search!$E$4,$F6,1),""))-(-IFERROR(SEARCH(Search!$E$5,$G6,1),""))-(-IFERROR(SEARCH(Search!$E$6,$H6,1),""))-(-IFERROR(SEARCH(Search!$E$7,$I6,1),""))+ROW()/100000, ""), "")

F: =IFERROR(VLOOKUP($G6, EquipmentData!$B$3:$C$1048576, 2, FALSE),"")

Each number in bold should match the row number (I dont know if this happens automatically or requires coding).

View 5 Replies View Related

Code Breaks Sometimes/sometimes Not: Subroutine Executed When The User Presses A Command Button

Mar 10, 2007

I have inherited support for the an Excel 'program' that seems to be fairly unstable. I am currently having problems with the following code in a subroutine (executed when the user presses a command button):

With ActiveSheet.PageSetup
.PrintTitleRows = "$1:$7"
.PrintTitleColumns = ""
.PrintArea = ActiveSheet.UsedRange
End With

Sometimes it works and sometimes I get the following error: Run-time error '1004'
Unable to set the PrintArea property of the PageSetup class.

… on the .PrintArea = ActiveSheet.UsedRange

I am having a hard time figuring out what is causing its wishy-washiness. Running the following code (launched from worksheet named 'consumer' with a command button):


Sub subConsumerFacesheet()...................

View 3 Replies View Related

Advanced Filter Code - Criteria Range More Than 1 Row Breaks Filter

May 1, 2014

I found a great bit of Advanced Filter code that works great, and fixed a problem of clearing a cell breaking the filter.

But if I want to increase the criteria from 1 row to 2, so you can start to include And , Or operations, it breaks the filter. Even an attempt at a manual one fails, until you put the criteria range back down to one row, then it's fine again.

I've tried changing the Target Row to >2 but that didn't work. how to make the criteria range bigger, and no problems of breakage if you clear the cells? It makes for a very useful automated Advanced Filter.

Here's the code :

[Code] .....

Database = the named area of raw data.
DATA is the name of the raw data worksheet
The criteria range should be AZ1:BC3, but of course royally breaks it...

View 4 Replies View Related

Unzip Code - Works Without Variables, Breaks With Variables...

Feb 5, 2009

Unzip Code - Works without Variables, Breaks with Variables.... This has been driving me bananas...

I have the

View 2 Replies View Related

Macro: Clear Page Breaks & Add Page Breaks

Nov 28, 2006

I need to remove all existing page breaks in a document and add a page break every 72 rows. I've tried some similar codes from this forum with other functions that I don't need in it.

View 7 Replies View Related

How To Continue For Loop

Jan 29, 2013

In Visual Basic, the Continue For statement will complete the current iteration and start the next, if any.

Code:
For i = 1 to 10
...do some work
If [some condition] then Continue For
...do the rest of the work
End For

This statement gets flagged as invalid in VBA.

What's the proper way to end just the current iteration of a For loop in VBA without exiting the loop entirely (Exit Loop)?

View 3 Replies View Related

Continue Finding

Apr 6, 2007

I have this vba code and i want it to carry on finding the next cell with the same value, so every time i click the button it'll find the next cell with the same value. E.g. i type in mark it'll find the first Mark, then click again it'll find the second Mark and so on

Sub Find_cust()

If Range("N3").Value = "" Then
MsgBox "Please enter a customer name"
Exit Sub

End If

valueToLookFor = Range("N3").Value
Set found = Worksheets("CD").Range("b:b").Find(valueToLookFor, LookIn:=xlValues)
If Not found Is Nothing Then
iRow = found.Row
Cells(iRow, "A").Select

End If

End Sub

View 5 Replies View Related

Create Search Code In VBA?

Mar 6, 2014

Create a search engine in vba for a worksheet, a macro to be assigned to a button. The 'search engine' to that 'Find button' that I have in mind is on these parameters:

- search any result, complete or partial, non-case sensitive;
- the text to search is typed in B2;
- after the text to search is typed, it only works by pressing that 'Find button';
- it only searches column D in the current worksheet;
- tells the total number of matches found in C2;
- when that Find button is clicked, it goes automatically to the first result found and stops;
- if that Find button is clicked again then it goes to the next found match and stops, and so on;
- when it reaches the end of the document, it just restarts to search from the beginning;
- if there are no matches, it just makes a sound and does nothing; and types zero (0) in C2.

View 11 Replies View Related

Search And Replace Code

Jul 2, 2009

How can I reduce the code to perform this task ?

View 3 Replies View Related

Code To Search For A Macro

Apr 12, 2007

way to code in Excel 2000 a macro that would on "workbook open" search for a specific macro and if its there run it?

View 9 Replies View Related

Macro To Continue A Series..

Aug 13, 2009

Basically in B3 I have number 1. I want a macro to go to the next empty cell down and continue the series, i.e. 2. Then if it is ran again it will go to the next cell down and put in 3. This is what I want it to do only I don't want it to reference ranges. I added the offset line in but still need to know how to autofill to the nex line down..

View 2 Replies View Related

Can Data Continue From One Cell To Another?

Mar 13, 2007

If cells A1:A3 contain text that needs to be combined in B1 but amount of data sent to B1 is of greater size than B1 can display because of surrounding cells is there a way to allow data not viewable to overflow into another cell?

View 5 Replies View Related

Being Able To Type A Code And Search Stats

Mar 20, 2009

i made another thread about this but this one is more detailed.

all my questions are in the attachment excel thing, on the main page.

View 9 Replies View Related

Code To Search Date In Column?

Nov 19, 2013

code for a button that will search for a particular date that below 6 months from the current date today? Just like a notification that there is a date below 6 months from now. I will put this code where already have a code for my workbook.

View 1 Replies View Related

Include Search Button Code?

May 2, 2014

I have a spread sheet with 2 columns of data. On the top of the sheet, I want to include a Search Button that when it is clicked, a box pops up and asks to Enter Search Term, when they click ok it operates a the find function in excel.Macro I should create and apply to the button

View 3 Replies View Related

Code For Selecting Search Button

Jan 5, 2007

What code to use to tell VB to select the "search" button on webpage "http://66.179.23.21/DP1/Metroplex/FairfaxCounty/permit/WIZ_INSPECTION.asp"?

View 9 Replies View Related

Can You Modify This Code To Search Only One Colomn?

Jul 3, 2006

Private Sub CommandButton1_Click()
Dim strFirstAddress As String
With Sheet1.UsedRange
Set rngFind = . Find(ComboBox1.Text, LookIn:=xlValues)
If Not rngFind Is Nothing Then
strFirstAddress = rngFind.Address
Do
rngFind.EntireRow.Copy sheet3. Range("a" & sheet3.Rows.Count).End(xlUp).Offset(1, 0)
Set rngFind = .FindNext(rngFind)
Loop While Not rngFind Is Nothing And rngFind.Address <> strFirstAddress
End If
End With
Unload UserForm2
UserForm4.Show
End Sub

The problem is it searches the whole sheet, what I want it to do is only search one colomn (colomn A). I know its prob an esay thing to change but I can't for the life of me do it!

View 3 Replies View Related

Search Code To Find The Last Formula Used

Jan 25, 2007

Code such as the one below carries formulas in columns 3 and 10 down to new rows when inserted. However, I need to allow a user to overwrite the formula in col 3 with any text value. But if the user overwrites the formula on the last row, and then manually enters a new record below, then the code in the last row of col 3 does not get copied down. Is there a way to search upward in columns 3 and 10 until reaching the last cells with formulas, and apply the formulas to the new cells in cols 3 and 10 on the new row? Or, is there a way to store the formulas:

=IF(A21<>"",B21,"") in column 3
=IF(B21<>0,IF(C21<>B21,A21&", "&LEFT(C21,2),A21&", "&LEFT(B21,1)),"") in column 10

Storing these somehow would be good if the user overwrites the formulas in the very top row of data (row 2).

If Intersect(Target, Me.Range("A:A")) Is Nothing Then Exit Sub
On Error Goto CleanUp:
With Target
If .Value <> "" Then
Application.EnableEvents = False
.Offset(0, 3).FormulaR1C1 = "=RC[-1]=R2C3"
.Offset(0, 10).FormulaR1C1 = "=RC[-1]=R2C10"
End If
End With
CleanUp:
Application.EnableEvents = True

View 3 Replies View Related

Comments Section - Continue To Next Cell Down

Sep 12, 2012

I am creating an excel sheet where there is a comments section where the column width is 58 characters. Is it possible for someone putting in comments to have it automatically go to the next row once they enter 55 characters in the row above? I don't want to use wrap text and need to maintain the rows in this section.

View 8 Replies View Related

Formula Copying- Continue All The Way Down A Column

Feb 13, 2009

How do you make a formula continue all the way down a column, so i haven't got to drag or copy it down all the time?

Lets say I have a formula in row Z, which is =SUM(A1:T1) If I want that formual to be in every cell of row Z, I would have to copy it down. However, if I do that, the spreadsheet becomes huge. I just want that formula (in fact my formula is much more complicated) to always be in row Z, for evermore, as the spreadsheet in time will have more and more rows in it.

View 9 Replies View Related

Range Continue Until It Recognizes The Last Cell

Jun 19, 2009

I have this macro that does an autofill in Column A depending on what is in Column B, however the rows are going to increment frequently. Column B has repeating numbers but they are not all even amounts. So column B can 1,1,1,1,2,2,2,2,2,3,3,4,4,4,4,4,4,4,4,5,5, and so on all the way down. The code will identify when the value changes to something new and in Column A will start numbering from 1 to whatever until it recognizes that a value changes in Column B.

Columns("A:A").Select
Selection.Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove
Columns("C:C").Select
Selection.Cut
Columns("A:A").Select
ActiveSheet.Paste
Columns("C:C").Select
Selection.Delete Shift:=xlToLeft
Columns("A:A").Select
Selection.Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove
Range("A1").Select..............................

The problem that I have is in bold with the range. I need it to continue until it recognizes the last cell in the column that has a value and stop.

Right now it will work but only until row A6391 for my first sheet however these rows will increase over time. I'm using Office 2007.

View 9 Replies View Related

Find/Search Code Tweak In Cells

Jun 12, 2009

The code below will locate and select cells containing Kenny. What I want to do is create a little search cells(C5) on my spreadsheet and have the code reference whatever is typed into the search cell. I'm sure it's a simple adjustment. I've tried changing the What:="Kenny" to What:="=C5" & What:=C5 all without success.

Sub find()
Cells.find(What:="Kenny", After:=ActiveCell, LookIn:=xlValues, LookAt _
:=xlWhole, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
True).Activate
End Sub

View 2 Replies View Related

Code Doesn't Search All And Delete In One Shot?

Apr 14, 2014

I have worksheet that contains the wording "Total For Page" in columns A:N. I would like to find that wording delete that row and 3 rows below it. found the code below that works, but I have to continually run it to find the wording and delete the rows. The code doesn't search all and delete in one shot.

[Code]....

View 3 Replies View Related

Code To Filter And Search For Criteria And Cut And Paste To Another Tab

Feb 19, 2014

What I have is a workbook where I have to filter on a column called "Code" in a worksheet called "Current" and search for varies criteria and then copy these filerted rows and paste into a worksheet called "Past" and then delete the orginal rows form the "Current" tab.

e.g. filter on a column called "Code" and filter on the criteria that match "Monday", "123" and "Customer Accepted" and paste at the bottom of the "Past" tab and then delete from the "Current" tab. A message should then be displayed saying "Data Transferred OK" with the curser then highlighting "A1" on the "Current" tab.

The only cavat is that the code may find none, some or all of the required criteria, however, in the event of finding no matching data then a message should then be displayed saying "No Data Found" with the cursor then highlighting "A1" on the "Current" tab

As I have to repeat this to filter on various columns for various criteria I intend to modify the code accordingly, however, in once instance I will have to filter on a column called "Code" and filter on the criteria 1,2 and 3 etc but then I have to do second filter on column called "Code Extra" and then do a filter on the criteria 4, 5 and 6 so the additional code would also be good.

View 2 Replies View Related

Generalizing Search Criteria In Macro Code

Mar 24, 2014

HTML Code: 

Sub CopyTimeColumn()
Dim tFIND As Range

On Error Resume Next
With ActiveSheet
Set tFIND = .Range("1:10").Find("Time", LookIn:=xlValues, LookAt:=xlWhole)
If tFIND Is Nothing Then

[Code] ............

This code searches the "Time" Column in first ten rows and copies it to another sheet...

If I have encountered with such a column whose title is "Time in seconds" then it will not search this column...What i want is the modification of this code such that it can detect column which contains any part of "Time" word in it ...

View 3 Replies View Related

Search HTML Source Code For Text

Oct 21, 2009

I need to check a website daily to see if a link has been updated. If it has been updated, the beginning of the link changes to a different date. Example: today link is www.10212009dave.com and tomorrow link may be www.10222009dave.com. Lets say the link is on www.gugg.com. The link does not change everyday, but I think a good way to see if it has been updated is to search through the source code in the html for that link.

Thus I would put www.10212009dave.com into cell A1 and tell excel to search the source code on www.gugg.com, and if the contents of cell A1 is NOT found, I'd display a message box stating the link has been updated.

View 9 Replies View Related

Can Wildcard Search Asterisk Be Tuned Off When Using VBA Code?

Dec 26, 2012

I am trying to run a routine in VBA that will Search for a Part-No. that normally contains asterisks. It is giving me bad positive Search results due to the coding looking at the (*) asterisk's as a wildcard character.

The following Part-No.'s are located in cells (C11:C16):
9L3Z*17757*BCP
6C3Z*16138*AACP
AE5Z*16138*B
AE5Z*17E811*CF
AE5Z*17E811*F
AE5Z*17E810*F

Part-No. to be Searched for:
AE5Z*17E811*F

When the below code is run, the incorrect Part-No. 'AE5Z*17E811*CF' is found in cell (C14) rather than the correct Part-No. found in Cell (C15).

Code:
'The following 2 lines are defaulted for ease of coding
pNumb = "AE5Z*17E811*F"
Range("C11", "C16").Select

[Code] ......

View 5 Replies View Related

VBA Code To Search Column For String Of 50 Different Cities?

Mar 22, 2013

I need a VBA code that will insert a column next to A, search column A for a string of say 50 cities, and then enter the classification of that city into column B. example below.

Before
A B
1 Boston Good
2 Atlanta Good
3 Georgia Bad
4 NewYork Bad

After
A B C
1 Boston MA Good
2 Atlanta GA Good
3 Cleveland OH Bad
4 NewYork NY Bad

I'm not actually using cities and states.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved