*
A
B
C
D
E
F
1
DATA1
DATA2
SUM A+B
DATA3
DATA4
SUM D+E
2
The code I have here which sums row A and B in column C as shown in the table above And finish.
Sub Sum_Rows_1()
Dim LastRow As Long
Dim iRow As Long
Dim iCol As Integer
LastRow = 0
Is it possible code continue the summing up of row D and E in column F?
I am looking to create a userform to add new rows to a sheet, and continue the formulas in certain columns.
The user starts by entering a number in the text box tbRowAdd. When the user clicks on the button called btAdd it first checks to make sure the number entered is equal to or between 1 and 1500. If this is not the case it should display a message box saying "You must enter a valid number from 1 to 1500 in the tex box."
If the number is valid it should then add that amount of rows below the current active cell in the worksheet ReturnData.
It should then continue the formulas in the A, B, C and F columns. The formulas are as follows:
A: =IFERROR(IF($D6="", "", ROW($A6)-ROWS($A$1:$K$5)),"")
B: =IFERROR(RANK($C6,$C$6:$C$99986, 1),"")
C: =IFERROR(IF(OR(AND(ReturnData!$D6>=Search!$E$1, ReturnData!$D6<=Search!$E$2),OR(Search!$E$1="", Search!$E$2="")), IFERROR(SEARCH(Search!$E$3,$E6,1),"")-(-IFERROR(SEARCH(Search!$E$4,$F6,1),""))-(-IFERROR(SEARCH(Search!$E$5,$G6,1),""))-(-IFERROR(SEARCH(Search!$E$6,$H6,1),""))-(-IFERROR(SEARCH(Search!$E$7,$I6,1),""))+ROW()/100000, ""), "")
F: =IFERROR(VLOOKUP($G6, EquipmentData!$B$3:$C$1048576, 2, FALSE),"")
Each number in bold should match the row number (I dont know if this happens automatically or requires coding).
when the information cannot be found, it breaks the code and did not continue the search.
View 6 Replies View Relatedi am trying to write a macro that will allow me to, while two workbooks are open and one is defined as active i.e
in workbook 1 i want the cell A1 to be defined as the sum of cell A2 and A3 in workbook 2.
i have a code that lets me do it but the problem is that this code (that i recorded) only gives me specific workbook names to work from..
i dont know if i make much sense but i would like the macro to work on any 2 workbook that are open and perhaps having flexibilty to choose would be great here is my attempt
Product Group Arg.Braz.Mex.Peru
Red paint Paint5324
Blue paintPaint5684
WallpaperWallpaper6585
LampsFurniture 4631
ChairsFurniture 1645
Green paintPaint1356
SofasFurniture 3358
SUM(Paint,Argentina)SUM(Paint,Brazil)SUM(Paint,Mexico)SUM(Paint,Peru)
SUM(Wallpaper,Argentina)SUM(Wallpaper,Brazil)SUM(Wallpaper,Mexico)SUM(Wallpaper,Peru)
SUM(Furniture,Argentina)SUM(Furniture,Brazil)SUM(Furniture,Mexico)SUM(Furniture,Peru)
I am trying to work out VBA code or another way in Excel to find a solution for this problem - I need to be able to sum up the values that I have posted below - so for SUM(Paint,Argentina), this would be the sum of the red paint, blue paint and green paint values under the Argentina heading, that are all categorised into the 'Paint' group. The same follows for all the other categories. I was trying to use 'Defined Names' to group the categories together, and so would then do =Sum(Paint). However this was not allowing me to sum by each country, and the 'Create from Selection' naming tool was not naming all of the values for Paint (blue paint, red paint, etc.) under the paint category.
This is an incredibly simplified version of the data I am actually dealing with - I am doing this for 70 country columns and 250 rows of product categories.
I often find myself in the following situation - I will highlight a range of numbers to see what the sum is in the bottom right hand corner (the cells which I select areoften not all within the same column or are not consecutively listed under each other) .Depending on the circumstances I will then type out a SUM formula with the range to put that value somewhere in the spreadsheet - the problem being that I have to deselect the cells and then re-select these within the formula. When I have selected many numbers, it is not always easy to remember every number which I included.
As a way to remember the numbers, I format those cells in a certain colour before I do the SUM formula and would then include only those coloured cells in the formula. I would like to avoid this extra bit of work.
I am new to VBA but would like some form of code that allows me sum the contents of a selected range and paste that formula beneath the last value in the range - the range would have been selected before running the maco.
I have made a basic holiday planner, where each employee has one worksheet which shows 52 x 5 day weeks.
When an employee asks for holiday, I put a 1 in the corresponding day (cell). What I need to happen is that if 4 first aiders all ask for holiday on the the same date a warning User form loads up.
The names of the 4 worksheets are;
"Jason L 2014", "Sharon L 2014", "Alan B 2014" and "Chris M 2014".
The ranges for the 5 day weeks are
"B7:F7", "L7:P7", "V7:Z7"
"B10:F10", "L10:P10", "V10:Z10"
"B13:F13", "L13:P13", "V10:Z13"
"B16:F16", "L16:P16", "V16:Z16"
[Code] ........
The code should not run the User form until the sum of the same cells across the 4 worksheets = 4.
By this I mean if 3 of the first aiders book B7 off, the code searches the 4 worksheets and if the sum is 3 then nothing happens. However if the 4th and final first aider tries to book the same day off, when the code runs it totals 4 and the User form runs.
In Visual Basic, the Continue For statement will complete the current iteration and start the next, if any.
Code:
For i = 1 to 10
...do some work
If [some condition] then Continue For
...do the rest of the work
End For
This statement gets flagged as invalid in VBA.
What's the proper way to end just the current iteration of a For loop in VBA without exiting the loop entirely (Exit Loop)?
I have this vba code and i want it to carry on finding the next cell with the same value, so every time i click the button it'll find the next cell with the same value. E.g. i type in mark it'll find the first Mark, then click again it'll find the second Mark and so on
Sub Find_cust()
If Range("N3").Value = "" Then
MsgBox "Please enter a customer name"
Exit Sub
End If
valueToLookFor = Range("N3").Value
Set found = Worksheets("CD").Range("b:b").Find(valueToLookFor, LookIn:=xlValues)
If Not found Is Nothing Then
iRow = found.Row
Cells(iRow, "A").Select
End If
End Sub
Basically in B3 I have number 1. I want a macro to go to the next empty cell down and continue the series, i.e. 2. Then if it is ran again it will go to the next cell down and put in 3. This is what I want it to do only I don't want it to reference ranges. I added the offset line in but still need to know how to autofill to the nex line down..
View 2 Replies View RelatedIf cells A1:A3 contain text that needs to be combined in B1 but amount of data sent to B1 is of greater size than B1 can display because of surrounding cells is there a way to allow data not viewable to overflow into another cell?
View 5 Replies View RelatedI am creating an excel sheet where there is a comments section where the column width is 58 characters. Is it possible for someone putting in comments to have it automatically go to the next row once they enter 55 characters in the row above? I don't want to use wrap text and need to maintain the rows in this section.
View 8 Replies View RelatedHow do you make a formula continue all the way down a column, so i haven't got to drag or copy it down all the time?
Lets say I have a formula in row Z, which is =SUM(A1:T1) If I want that formual to be in every cell of row Z, I would have to copy it down. However, if I do that, the spreadsheet becomes huge. I just want that formula (in fact my formula is much more complicated) to always be in row Z, for evermore, as the spreadsheet in time will have more and more rows in it.
I have this macro that does an autofill in Column A depending on what is in Column B, however the rows are going to increment frequently. Column B has repeating numbers but they are not all even amounts. So column B can 1,1,1,1,2,2,2,2,2,3,3,4,4,4,4,4,4,4,4,5,5, and so on all the way down. The code will identify when the value changes to something new and in Column A will start numbering from 1 to whatever until it recognizes that a value changes in Column B.
Columns("A:A").Select
Selection.Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove
Columns("C:C").Select
Selection.Cut
Columns("A:A").Select
ActiveSheet.Paste
Columns("C:C").Select
Selection.Delete Shift:=xlToLeft
Columns("A:A").Select
Selection.Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove
Range("A1").Select..............................
The problem that I have is in bold with the range. I need it to continue until it recognizes the last cell in the column that has a value and stop.
Right now it will work but only until row A6391 for my first sheet however these rows will increase over time. I'm using Office 2007.
I am trying to make printable book labels in one worksheet based off of values from another. The labels that I have are standard address sized and come in sheets with 3 columns and 10 rows. My "label" worksheet has 5 columns (with B:B and D:D as "spacers") I made a "calculation" worksheet that simply runs the equation I want to use for the labels from A1:A1000. On the "label" worksheet, I have this formula in cell A1:
=IF('Label Calculations'!$A1="","",'Label Calculations'!$A1)
This way, it won't return 0s for blank cells from the "calculations" worksheet. I dragged down the formula to cell A10, but would like to continue the pattern so that cell C1 would be:
=IF('Label Calculations'!$A11="","",'Label Calculations'!$A11)
and cell E1 would be:
=IF('Label Calculations'!$A21="","",'Label Calculations'!$A21)
and the pattern would continue with cell A11 with the formula:
=IF('Label Calculations'!$A31="","",'Label Calculations'!$A31)
Then cell B11 would be 41, C11 would be 51, A21 would be 61, etc.
I can do it manually by adding the function in the top row of each "page" (A1,C1,E1 then A11,C11,E11...) and dragging them down each "page." However, I may end up with 20 some pages of labels. I feel like there should be an easier way I can do this.
I assume I would need a macro, but I am wanting to have a button where-by the user clicks to create another 100 rows and in-turn, continue the formula's that reside within the columns and rows above, down...
View 2 Replies View Relatedhow can i continue adding the numbers even if in one cell got an error value. Sample:
a1=5
a2=5
a3=#div/0! (this could be #name!, #value!, etc.)
=sum(a1:a3) returns #div/0! but i want it to return as 10. any clarification n how to do this?
I have values printed between from c5:c14 ( not always all 10 will be filled up. sometimes can be 1 also). Wanted some code or method where any value in this gets pasted in the second sheet from A1 onwards. Also whatever number of times I paste it keeps on adding one below the other in the A column in the second sheet . Important : If there are blank cells between one value and other in the working sheet, then it should eliminate the blank space and paste it in sequence in the second sheet. i.e if there are values in c5 , c8 , c14. Then when pasting in the second sheet it will be in A1,A2,A3.
View 3 Replies View RelatedI have a label that displays the date using the = now code
[Code] .....
When I open the form the date and time is correct, but it doesn't update while the form is open. Is there a way to make the date and time always correct while the form is open.
I want to a macro to start of with a Find method Eg Account..something like this
Cells.Find(What:="Account").Activate
Account could be in any row or may not be in the document.
My problem is when it is not in the workbook my macro will come up error. how to recode my macro to fix this.
Dim Finder as string
Set Finder = Cells.Find(What:="Account",...............
'Problem here
'
If Finder is not found then skip till next part of macro.
If it is then just select the Cell and I can work of that.
Also Can I do a Find formula to Find Either 'Account' Or 'Debt' Or Asset'?? Just want to know save me copy and pasting it down to change a name.
I have a macro that pulls in data from many workbooks. If there is no data in one of the workbooks the macro will not continue. Is there a loop or some other coding I need. The code for one of the worksheets is: (I am new to excel and know there must be parts that can be deleted in the below
Workbooks.Open Filename:= _
"J:SPORTSFORCESPORTSFORCE BUSINESS PLANSReporting spreadsheetCricket.xlsx"
Sheets("Numbers Report ").Select
ActiveSheet.Outline.ShowLevels RowLevels:=2
Range("A6").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Rows.Ungroup
[code]....
I got a workbook with a database in sheet1. I filter that database and copy - paste values the results to a new sheet. Next, I save that new sheet to somewhere on my drive. The thing is that I want to go back to my original database, and continue filtering. But that workbook is no longer the "active workbook". This is how it works:
sub DifferentClients()
For Each FieldWorkBy In Array("Client1, Client2,...")
MyDatabase.AutoFilter Field:=CountryCode, Criteria1:=Array( _
[Code]....
I have been able to put together a pretty hefty MACRO. I found out that some of the files I am importing may result in no data due to the manipulations I am doing. This causes a problem when I try to subtotal the data on each sheet. Is there a way to have the MACRO delete a sheet if cell a2 is blank and then continuw with the rest of the MACRO?
View 9 Replies View RelatedI have an excel file in which the cell has more than 3000 entries, like following. I would like to copy the contents before ";" to next row & continue.
Question:
CN=123,CN=12,CN=ABC,CN=AB,;CN=345,CN=34,CN=CDF,CN=DC,;CN=510,CN=51,CN=PQR,CN=PQ;
Answer should be in excel:
CN=123,CN=12,CN=ABC,CN=AB
CN=345,CN=34,CN=CDF,CN=DC
CN=510,CN=51,CN=PQR,CN=PQ
I do not know how can I achieve this through "Macro". I would like to detect ; in the cell & copy the contents before/after it in the next rows & continue till the last figure.
Im using vlookup to search a table and fill out a calendar with dates that various employees are gone. They can have multiple trips in one month and thus will be in the table multiple times. I have the calendar set up so days go across the top and names go along hte left side. so each cell is identified by name and day. I then have each cell using the vlookup command to search the table. now if one person has multiple trips a month is there a way to compare multiple entries in the table?
View 14 Replies View RelatedI am looking for some example code that when I get an error using workbook.open, because a file is corrupt, I can cut from the list and paste into a range to show that file had errors, then delete that row and continue.
For example
My list:
Column A Column B Errors List Error
File path B and name Information File Path A Information
File path C and name Information
File path D and name Information
I can cut and paste File path C into an errors list, then delete the row A and B and shift the below lines up.
I need to show an information box e.g. "Initialising..." that I can show and remove without user interaction. I can't seem to find this using either a userform or msgbox.
View 5 Replies View Relateddifference between these statements:
Quit, Exit , Break , Continue, Return
For example if want to stop code execution what should I use?
I've used the code below and it's worked to stop Update Links message, but i still need one tip to avoid continue message that shows up after Update Links massage:
Private Sub Workbook_Open()
Application.AskToUpdateLinks = False
Sheets("Feb").Activate
Range("A200:I400").Select
Selection.QueryTable.Refresh BackgroundQuery:=True
End Sub
I am trying to build a macro that will search a column for the word "TEST" and when it finds that word it needs to prompt the user with a YesNo message box (or something similar) if they would like to delete the entire row that contains TEST. If Yes is selected, it should delete the row and continue on to find the next TEST in the column and repeat this process. If the user selects No, it should continue on to find the next TEST in the column and repeat this process.
View 4 Replies View Related