I have been developing a spreadsheet for my HR department to display sick leave and holidays amongst various other things. After completing it I was asked to tally up both half days and full days (Full days shown with a capital 'H' and half days with a lower case 'h')
I have tried various combinations of things to get this to work using Exact and if statements but had no luck.
I have a string of names that run together without spaces or commas between each name.
"Danny TrejoJean Claude van DammeVincent SchiavelliGabrielle FitzpatrickDavid 'Shark' FralickPat Morita" for example.
Is there a way to add a comma and space between a lower case and upper case letter?
Only have upper case letters.
I am trying to get certain cells to only have upper case letters.
each cell in the code will have a single letter typed in.
I would rather have it as an event code (change while it is typed), but I have not grasped the whole thing yet.
This code does not give me any errors, but it is not changing the lower case letters into upper case letters either.
[Code] ......
When using the PROPER function, it capitalizes the first letter in a text string and any other letters in text that follow any character other than a letter, and converts all other letters to lowercase.
However, if A1 contains the text "2-cent's worth"; then =PROPER(A1) will return the following result: "2-Cent'S Worth".
Is there a way to prevent the PROPER function from capitalizing the first letter following the apostrophe?
Is there a formula to calculate the difference between two letters?
For example, I have levels A-Z. Column A contains level at the start of the year (A-Z). Column B contains level at the end of the year (A-Z). I would like to find the difference (e.g. level A to level D would be a change of 3).
I have a table with 9 columns filled by a letter (A, A-, B+, etc). This letters correspond to grades (4, 3.67, 3.33, etc). The tenth column is supposed to contain the numerical average of all 9 letters in the line.
View 9 Replies View RelatedSub Addy()
Do Until ActiveCell. Offset(0, -4) = ""
Renamer = Proper(ActiveCell)
ActiveCell = Renamer
ActiveCell.Offset(1, 0).Select
Loop
End Sub
fail? Trying to remove all capitals from names/addresses. Error message is "compile error - sub or function not defined"
I've got a pretty intense macro already written, a lot of Select Case components. At the end, if nothing matches I'd like to just copy the cell above to the cell below. However, there is a range of about 400 cells in length, so I'd need some sort of wildcard for range.
Rows("2:2").Select
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
Dim Cell As Variant
For Each Cell In Range("A1:OL1")
Select Case Cell.Value
Case "Eng1"
Cell.Offset(1, 0).Value = "Engine One"
tons more in the middle here
Case Else
Cell.Offset(1, 0).Value = "N/A"
Rather then returning "N/A", how could I reference the cell above and just copy it instead?
i have a list of 2000 fields which have the same format IE "AB10014"
I need to remove the "AB" from every field and leave the #.
Besides putting a space and running text to columns I'm not sure how.
I have words in cell range (i.e. A1:A1000) and I want them to became upper letters.
Excel forum to EXCEL FORUM
I have a column of cells, some blank, some containing just numbers, some containing just letters, some containing numbers preceded by the the letter 'p'
E.g.
frt
34.2
36
p34.5
In the cells containing the number preceded by the 'p' - i would like to remove the 'p' leaving just the number, with all other cells remaining unchanged.
I decided to try to change it into a Case Statement. Here is what I have now. But the problem seems to be this time at this line: When I have "01" in C5 the script just keeps going?
View 14 Replies View RelatedWhen I use a simple formula such as:
=upper(a1)
that will obviously change whatever is in a1 to Upper Case - but it will put it in the cell that holds the formula.
What I want to know is:
Is there any way I can format the cell to run the formula when the information has been pasted into the spreadsheet
how can I seperate small and big letters from one collumn, example:
NAME
name
NAME
NAME
name
name
Is there a VBA command to get the letters, instead of the numbers, of the column of a selected cell?
I have to letter a list whihc means setting up a loop using character codes.
I may have to go into double letters so I am working on how I would set up the loop for if and when it gets past 90 and starts on double letters. so far the highest is the letter "U"
of course the easiest would be to pick up a column value as a letter
NT values do not get a number
A_____ _____NT###
B_____1_______C####
C_____2_______RMK###
D____ _______NT####
i am guessing the loop might involve some arithmetic test between the count and the character set 65-90. or maybe a mod thing.
I spent a lot of time on this but still can't figure this out.
I have DATA
DATA RESULT
10 20
20 below no more larger value
12 15
8 15
15 below no more larger value
6 NA
What I want is the RESULT column.
The RESULT column returns the next value that is larger than the reference.
E.g. The next value that is larger than 10 is 20.
NOT the next larger value, the next larger value of 10 is 12. This is not what I want.
I can't construct a formula that would do it for me. I have a row of numbers. I need to find the first number in that row that is greater or equal to 90, when that is found I need to return a number from a different row. Example:
I have 90 in A1.
In row B2:F2, I have numbers like -125, -100, -90, 90, 91, 150 etc.
In row B1:F1 I have rates like 4.25, 5.5, 3.75, 5.625, 6.00, 7.00 etc
I need to get the first number that is >=90, and return the rate above that number. ( Rates are always in one row)
I need a function that can get, from a matrix, the first number that is higher than the number in a given cell.
View 9 Replies View Relatedi have a formula that i am trying to place in excel, however i am not sure what the function is I need to call or if there is one. the formula is G(sec Z)
View 2 Replies View RelatedI am looking for a formula that will show the higher value of two cells
i.e.
A1 = 10
A2 = 12
A3 = formula to say look at A1 and A2 and show the higher number
I want the cell A3 to be the higher value between the cells A1 and A2 ....
A1 A2 A3
20 30 30
In a grade book, if students get a grade on the final exam that is higher than the midterm grade, this becomes the exam portion of their (if it's lower, it's averaged). So a student who gets an 81 on the midterm and a 90 on the final gets a 90 for the exam portion of the final grade. What's the easiest formula to make the final exam grade the average if it's higher than the midterm grade?
Right now the formula I use for the course grade is this:
=SUM(I3*$I$1)+(J3*$J$1)+(K3*$K$1)
where I3/J3/K3 are the midterm/final/quiz averages, and I1/J1/K1 represents the respective % (30/40/30) of the grade assigned to the midterm/final/quizzes.
Got an equation nightmare on my hands.
So i have 3 columns of data
A: State Abbreviate
B: Benchmark Number
C: New Number
I am trying to get an equation that in column D will return the 2 .....
What formula can I use to accomplish the following, if it can be done.
If B9 is 100% all the rest of the % cell inputs would be 0%
If B9 is less 100% ,lets say 50% all the rest of the % cell inputs would be less than or equal to 50% until any sum of those cells equal to 100%
in which case if I enter 50% on B9 and 25% on D9 and 25% on F9 their total sum would be 100%.
If I try to enter a % on H9 it should not allow me to do it
because then the total sum on O9 would be more the the original amount on A9
If the weight of a shipment is between a range e.g 3.5kg I need it return the higher cost. For England this would be 9.31.
COSTLook upWeight KGEnglandScotlandIrelandWales1131-3 (KG)7.687.687.688.144454-5 (KG)9.319.319.319.4566306-30 (KG)14.3014.3014.3014.4531315031-50 (KG)22.4222.4222.4223.5551517651-75 (KG)35.1735.1735.1737.04767610076-100 (KG)45.2645.2645.2647.62KGS3.5ORIGINEnglandCost
Basically, I am looking for a macro code to link to an 'Update' button that will do the following;
I will have 2 sheets, one sheet will be referencing data from other sheet with the following
=IF(Log Sheet!A4="Yes",(A1),"0")
This means, if it needs to be 'referred' it will go to the other sheet, and if it doesn't, then it wont and it will show up as 0.
Basically, every row will have this type of formula for 30 columns, and i would like a macro code that will hide values of 0, but even once hidden, will then show them again if in the other spreadsheet i change the value to yes, meaning i want the previously hidden row to show.
I need a formula that can look at to cells, and if they are both the same pick cell A1 but if one of the cells has a higher amount than the other pick that one.
so the formula would do the following
look at the amount in A1 and B1 if A1 is higher than B1 input A1, if B1 is higher than A1 input B1 but if A1 = B1 then input A1,
I have two columns (let's say column A and C), i would like to add the values in column A only if they are higher than the ones in Column C in the same row... how could i do that?
The sheet looks something like this, i would like to add the values in the first column only if they are higher than the ones in the third column and then of course get the sum of them... i would also like to know how many were there in total, but i guess i could do that with a count formula i just need the parameters
$ 67,100.00 $ 110,000.00 $ 165,100.00 $ 146,034.00 $ 239,400.00 $ 220,100.00 $ 90,184.69 $ 147,843.75 $ 168,500.00 $ 51,011.25 $ 83,625.00 $ 95,100.00 $ 89,860.32 $ 147,312.00 $ 198,200.00 $ 159,121.36 $ 260,854.69 $ 26,000.00 $ 129,941.44 $ 213,018.75 $ 235,700.00 $ 88,869.38 $ 145,687.50 $ 95,600.00 $ 27,772.54 $ 45,528.75 $ 43,000.00
For the following code, I'm getting the " Case without Select Case" error (On Case 3 to 5...assuming more are wrong too, but debug can't get there yet). I thought I had it right, obviously don't. Can anyone spot how my code is wrong? ....
View 9 Replies View RelatedI have a reference value(say 'X') at L3, now i want to select a value next higher to this value(ie..'X') in the column ''C'' say and also i have to print the corresponding values of the row corresponding to B,C,D,E,F etc.
View 1 Replies View Related