Cell That Doesn't Reach The Desired Amount
Jan 14, 2006
function that add to any cell that doesn't reach the disired amount.
If the required number is 14 and a calculated cell comes up with 13 or less; I need a funtion to take that number and add a penalty number to it.
For example: For arguements sake the penalty is $150.00. Suppose cell 1A has 5 and cell 1B has 5; cell 1C adds them for a total of 10. I need cell 1D to realize that the number in 1C did not equate to atleast 14 and therfore 1D should show $150.00 and for every cell selected that falls short of 14 should add an additional $150.00 to 1D.
View 9 Replies
ADVERTISEMENT
Mar 26, 2007
My sheet called 'Report' finds a type using a vlookup. I then have a sheet called labor, where I want to find put the total amount for labor using this formula: '=SUMIF(Report!$K$2:$K$65000;LABOUR;Report!$G$2:$G$65000)', but it only returns a '-'. I want the formula to return total amount from column G, if column K is type 'LABOUR'. Is my formula incorrect?
View 2 Replies
View Related
Jun 5, 2008
Im trying to set up an active running inventory sheet where: (A)the progressive daily sheet cells reference back to the corresponding master sheet cells fluctuating the master values, (B) the same progressive daily sheet cells reference back to a cummulative totals-cell based on whether I added or subtracted inventory. I want to make a copy of the blank "sheet 2" with all of the formulas and move it to the end of the workbook each day and enter new values which will reference back to the master sheet so that I can click on a date sheet and see an individual day's values or click on the master sheet to see the fluctuating inventory on-hand and the cummulative +/- totals of all days combined. I've got a couple hundred individual cells to reference. I've tried and tried but I can't make it work. Heres what I need to do:
I need to reference individual cells from "sheet 2,3,etc" back to a corresponding cell in a master sheet. But I need the values in each cell in "sheet 2,3,ETC" to increase or decrease the corresponding cell values in the master sheet. For example: If the value in the master sheet B5 is 200. Then in sheet 2, I enter +50 in B5, I need the master sheet cell B5 to increase by 50 to 250. I also need a way to decrease the cell value in the master sheet B5 if I enter a negative value -50 in sheet 2 B5. I also want to know if I can reference the same cell values entered in "sheet 2,3,etc cell B5" back to totals columns C5 for adding inventory or D5 for subtracting inventory in the master sheet where the master totals columns would reflect cummulative totals added or subtracted. For example: if the value in sheet 2 B5 is +50, then the value in Master sheet C5 would add 50 to a progressive total. But if the value in sheet 2 B5 is -50 then the value in master sheet D5 would add -50 to a progressive total.
View 4 Replies
View Related
Jan 5, 2009
I'm using Excel 2007 and s/s is 325501 rows deep. It consists of series of ranges between 4 and 30 rows deep.
What I want to do is locate the next appearance of a name and copy its accompanying number.
Doing this manully is not feasible, given the large size of the s/s .
I enclose a small attachment showing what I am trying to achieve. For those who don't like opening attachments the wording in it is :
The desired objective is to place in column Q the next appearing number in column L of the name in column C.
The VLOOKUP formula in column Q presents the desired number but (problem!) presents a zero when next appearance = blank.
When this happens I want the formula/code to repeatedly lookup the next appearance until it finds a number.
Examples of where next numbers appear are given here in column R.
View 11 Replies
View Related
Feb 21, 2013
I am working in excel. I have a column with about 30 rows. After computation only a particular row will have an alpha-numeric value, this will be any one row never more than one, all the remaining rows will be completely blank.
My question is, how do I represent this alphanumeric value which can come in any row to a particular cell.
View 1 Replies
View Related
Apr 26, 2009
I want to look up a value in a range of cells and then return a value in a cell in the same row containing the desired value, similar to a vlookup. Except I want to search through several columns for this value and I would like to have it find every occurance of the desired value and return a value in a cell n the same row of each occurance of the desired value.
View 2 Replies
View Related
Mar 14, 2012
I have searched and have not been able to find an answer to this question so it might be a little unique possibly. I have an ActiveX combo box that I am trying to do something with. The text that I want to appear in the combo box is already there and I did this by creating a list and referencing it to the combo box. So the combo box has the following four items in its drop down:
Boat
Car
Plane
Walk
Now the part I cannot figure out is how to make a selected value appear in another cell based on what was selected in the combo box. For example, if boat is selected in the combo box, then I want the value 25 to appear in a cell. If Plane is selected in the combo box, I want the value of 100 to appear in a cell. For walk 5, and for car 22. I know this can easily be done with data validation and a validation drop down list but I do not want to use that but need to have a combo box do it instead. I just don't know if it cannot be done as a list or not and have experimented with INDEX but not having any luck there. I do not want to use any macros for this either. Basically I am wondering how I can make my combo box work just like data validation drop down menu bar with formatted values outputted into a cell.
View 3 Replies
View Related
Apr 15, 2008
1st post so hope that title isn't too vague.
Using VBA, I have a macro that will find a column based on a week number and add in a new column.
It will then offset the ActiveCell down one.
I now need the macro to SUM all values in that row to the left of the ActiveCell.
My original thought was to use:
ActiveCell.Offset(1, 0).Range("A1").Select
Range(Selection, Selection.End(xlToLeft)).Select
Unfortunately, there are gaps in the data field, blank cells that should count as zero value.
How can I highlight all cells to the left, from whichever column the active cell is in, through to column B?
View 6 Replies
View Related
Jan 6, 2013
I hold some data in the Excel 2007 file. It's about 400 rows and about 10 columns. On occasion I have to print some values from this file. But it has to be in defined position on the paper. It is like I already have the prepared paper with fields, and I just have to fill some fields on the paper with data from the columns. Is it possible to make a program that will take each row that I label for printing, and print just some columns but in a defined position on the paper ?
View 5 Replies
View Related
Apr 28, 2012
I am trying to subtract an amount from a cell until it reaches 0, then move and subtract from the next amount, and so on.
AmountFixed BudgetedResult53.50Subtracted 5 tell it hit zero1.30Subtracted remaining amount until zero43.8Subtracted remaining amount until zero3.8 was left over without hitting zero is good. Is there formula for this?
View 6 Replies
View Related
Jun 3, 2014
I want to know if it's possible to calculate the probability that a certain range of values, reach to a certain point.....
The range is this (example):
4
3
9
7
14
22
15
20
42
46.....
What I want to know is if this tendency will reach to 1000. Or how many steps more will be need to reach 1000.
Like I said, and don't know if this is in the right place, but if you put this values in a graphic you will see that the tendency is growing. I assume that this tendency will reach to 1000. But will be in the next 10 steps or in the next 30.
View 3 Replies
View Related
Apr 21, 2009
Is there a way that Excel can automatically enter to next row once the typing has reach the end.
Example: I have 5 columns (A to E) and I am typing at column A. While typing, the text will go along to cell B, C, D and E. The problem is, if I don't manually go to next row and continue typing, the text will go to column F, G and so on. Is there a way where excel can automatically jump to next row if the text has reach column E?
Another problem is, say I have 3 rows full of text (column A to E). If I edit one of the row to exter some new texts, the whole sentence will go along to column F, G and so on. What I can do now is, re-edit all the rows to adjust them back.
View 9 Replies
View Related
Dec 7, 2007
I have a target to achieve every month in my department for the number of items completed named BC.I am trying to create a formula so that I know how many minimum items I need to complete every day in order to achieve this target by month end. The target to complete each month is calculated with multiple variables and therefore I am not sure how create a formula to calculate the minimum item to be completed everyday to achieve the target by month end. I have attached the spreadheet and appreciate help. The target to achieve is named "Target BC" in red.
In addition, at the beginning of the month, we only have forecasted numbers and these numbers needs to be replaced by actual numbers everyday.
View 9 Replies
View Related
Oct 24, 2011
Code below. I need it to NOT run if the sheet week2 doesn't exist. Currently it gives a runtime error '9' out of range. This is due tot he sheet not being present because sometimes it is not generated.
Code:
Sub RemoveColWeek2sheet()
Dim ColNo As Integer
Dim rng As Range
Set rng = ThisWorkbook.Sheets("Week2").UsedRange
[Code] .........
View 6 Replies
View Related
Jan 28, 2009
I need a formula to calculate the amount due based on cumulative sales once a breakpoint amount is reached.
Example:
Breakpoint:
cum sales are > 500 pay at 3%
cum sales are >1,000 pay at 2%
month/ sales/ cumul sales/ amount due
jan/ 100.00/ 100.00/ 0
feb/ 600.00/ 700.00/ 6.00
mar/ 600.00/ 1,300.00/ 18.00
and so on...until the end of year.
I tried using an if formula by could not get it to work.
View 9 Replies
View Related
Dec 11, 2013
I've put together a spreadsheet look at the time taken for a vehicle to get from one building to another when called. I've set up conditional formats where the timings turn orange after 5 minutes and red after 10 minutes taken. What I also have to show though is who is taking the vehicle and break it down to show any delays to patients. Is there a formula that will automatically tell me when there has been a delay to patients?? Be amazing if there is as it would save me uber amounts of time as i have to collate a whole years worth of data!
I've attached a small sample of what I've done to show you how the spreadsheet looks.
sample.xlsx
View 5 Replies
View Related
Mar 24, 2009
I have a UPC list. Some are more than 12 digits, and some with less than 12 digits. I need to make sure there are 12 digits in each UPC. I know how to count using LEN, strip leading zeros of those UPCs that are >12 digits using RIGHT.
What I need now is any number with less than 12 digits, such as 000123, add a 4 to the beginning (4000123) and fill in '0's in between the 4 and the short UPC number to make 12 digits, 400000000123. They vary from 1 to 13 digits.
View 4 Replies
View Related
May 21, 2009
I want to save one million dollars in 10 years earning 8.00% interest. How do I calculate how much I need to save per month.
View 11 Replies
View Related
Aug 27, 2007
Below is my data point for each month. The goal I need to hit is 99%. So I need to figure out what minimum monthly percentage I need for the rest of the year, I will need to reach a goal of 99%, and if I can't reach it, return an error. Lastly, i want to be able next month to go in and fill in the AUG percentage with an absolute number (i.e. 89%) and then I would like the rest of the percentages to automatically update by figuring out the new minimum monthly average given the new value for August. I thought that I might be able to do that if there is a function that says "If cell is a number, leave it alone, if it's a formula, then include that cell in the calculation of the minimum monthly average.
Jan 89%
Feb 88%
Mar 83%
Apr 89%
May 90%
Jun 86%
Jul 82%
Aug
Sep
Oct
Nov
Dec
Goal 99%
View 9 Replies
View Related
Oct 28, 2005
I am looking for a Formula that can process the following:
The Sum Target Value is variable e.g.; 147
I have two columns of numerical values: Column “A” and Column “B.”
Column “A” Houses the Numerical Labels that I wish to have Returned when the
Sum Target Value is processed /reached - Subtract Sum Target Value as noted
below.
To Subtract Sum Target Value:
Start from LAST non-zero numerical value in Column “B” and Subtract one Cell
value at a time (or Sum up the Column) until the Sum Target Value or nearest
possible Sum BELOW, the Sum Target Value is reached. In this instance, it is
147. I wish to Sum the values in Column “B” to 147 per the above. The
summed values can be below BUT NOT over the Sum Target Value.
Return the Numerical Value that is Offset ONE Cell to the LEFT (Column “A”)
and ONE Row Above LAST value Subtracted (in Column “B”) to reach Sum Target
Value. The Result – Numerical Label should come from Column “A.”
Col “A” Col “B”
2003
2051
2105
21511
22010
22515
23016
23510
24011
24529
25020
Reaching the Sum Target Value of 147 in Column “B” would go up to value 26,
Label 295 in Column “A”, totalling 131 which is below the Sum Target 147 but
including the value of 31 above it, would exceed the Sum Target Value of 147.
The required Result is returned from Column “A” Label 290 which is ONE Cell
to the LEFT (Column “A”) and ONE Row Above LAST value Subtracted (in Column
“B”).
View 14 Replies
View Related
Nov 20, 2012
For the below macro.
ABCDG
CodeTotalBaseNetA1 = 20%
A110083.3316.67A2 = 10%
A2350318.1831.82A3 = 7%
A3220205.6114.39A0 = 20%
A015015030
A1 is the code, take the total(B) and calculate the base(C) on the percentage given in the G, net = B-C. for A2 and A3 it is the same process.
For A0 the total (B) is equal to Base(C) and calculate the net on the given percentage in G.
View 1 Replies
View Related
Aug 16, 2007
I have a sheet in Excel 2004 for Mac that is a patient list with over 2000 patients. I need a rule that will compare values (patient IDs and responsible party ID) in two adjacent cells, if the values are different, to delete the entire row. The goal is to get rid of patients (rows) that are not the responsible party (responsible party ID).
View 3 Replies
View Related
Jan 7, 2014
Ok, basically C3 is a dollar amount. The default total for C3 is $0.00. If C3 is $0.00 then this formula cell will display a blank cell. If there is any other amount in C3 then the formula C3-C2 will run.
I tried this but it's not working:
=IF(C3="0","",C3-C2)
View 2 Replies
View Related
Jan 19, 2009
If a cell is not blank, then increase that amount by a percentage identified in another cell and display the value only without any formalas in a new cell. To this end I wrote this IF statement:
=IF(I2>0,CP9=(CA9*I2/100)+CA9,CP9="")
Observation: I see a FALSE in CS9 where this IF statement exists, however, CP9 does not display the required value.
View 8 Replies
View Related
Oct 22, 2009
is possible to have a cell's text color change if the value of the cell is greater than a certain amount. For example, if the cell is $200 or more the text would change to red.
View 3 Replies
View Related
May 15, 2008
I need a macro using worksheet activate event that will look a cell a10
and select if it doesn't have a formula
View 9 Replies
View Related
Sep 5, 2009
Attached is an example. Office 2007 & 97 versions attached. If a drop down menu on one sheet selects a certain word, then on another sheet based on that selection a dollar amount is entered. I am guessing this would involve some if commands, I am really weak on making those.
View 2 Replies
View Related
Mar 19, 2008
I have a cell (H27) which has a (sum) total in and have attached a NAME FRED.
This is fine as long as the client doesn't add a row above it.
If they do when I re-open the sheet the NAME doesn't stay attached to the cell (now H28)
Is there a way to keep the NAME attached to the cell regardless where it is?
Private Sub Workbook_SheetActivate(ByVal Sh As Object)
Range("$H$27").Name = "Fred"
End Sub
View 9 Replies
View Related
Sep 29, 2009
I just need a warning box that indicates a user has entered a cell value under 200. Here's what I have but it's not working.
View 2 Replies
View Related
Dec 13, 2012
figure out the amount of days in a cell.
I have dates in "A"
and need the amount of days to show up in "C"
EX:
A B C
11/24/12
12/13/12 18
So i need the code to have the "18" show up when I enter the date in "A"
View 1 Replies
View Related