Excel 2007 :: Printing Data From Cell In Desired Place On Paper?
Jan 6, 2013
I hold some data in the Excel 2007 file. It's about 400 rows and about 10 columns. On occasion I have to print some values from this file. But it has to be in defined position on the paper. It is like I already have the prepared paper with fields, and I just have to fill some fields on the paper with data from the columns. Is it possible to make a program that will take each row that I label for printing, and print just some columns but in a defined position on the paper ?
View 5 Replies
ADVERTISEMENT
Nov 28, 2012
Pretty straightforward: randomly and infrequently, Excel ignores my selection of the rear tray paper source on my MX870 Canon. Able to correct issue only by closing out and re-opening Excel.
View 1 Replies
View Related
Jun 1, 2012
Excel 2007 I have 80 very similar sheets. The only difference is the sheet name (Phase A (1), Phase A (2) etc.). I want the formula located in cell B5 to be different on every sheet.
I have listed the desired formulas on a single seperate worksheet, named "Overview". On this sheet, the following columns have these data in them:
A - Sheetname (example: Phase A (1), Phase A (2) etc.)
B - Cell location (example B5, constant)
C - A formula (example: =Sheet1!G47, =Sheet1!G48, etc.)
I would like to create a macro that will loop through all the sheets, doing the following:
1. Check if the sheetname exists in column A of the Overview sheet
2. If it does, take the formula from column C of the Overview sheet
3. And put it in the cell specified in column B of the Overview sheet
Here is some code, to illustrate the above. I know the code is mostly nonsensical.
Code:
Sub Enter_formulas()
Dim ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
[Code]....
View 2 Replies
View Related
May 7, 2004
how to choose 11 x 17 paper as my paper size option. They don't want it on anything but this size.
View 8 Replies
View Related
Jan 11, 2013
I have one page in excel to print. But I want to print it 1000 times and on each paper i need another serial number. How do I do this?
View 4 Replies
View Related
Jun 30, 2006
When I hit the print button the worksheet prints on the paper in the bin. However, there are times when I need to print the worksheet on different paper which requires me to go into the properties and change the paper source from Automatically Select to Manual Feed. I have been trying to created a macro what will switch to Manual Feed, print the worksheet and then switch back to Automatically Select but have been unsucessfull.
View 3 Replies
View Related
Jul 10, 2012
I am trying to put together a standalone VBA macro that can easily be inserted into my financial models that allows me to quickly switch between two different printing setups - e.g. 8.5x 11 and 11x17 tabloid.
I also am using excel 2007.
View 2 Replies
View Related
Nov 26, 2013
I've prepared an excel file (excel 2007) with some tabs that contains several charts (4 to 6 charts). When I want to print this file, the sheets with the charts on it doesn't print properly. I have set the print area to cover the charts only and then set it to fit on 1 page but the charts will not scale to fit.
I read somewhere that this is an excel bug - is there a workaround for this?
I could resize all my charts smaller but only as a last resort.
View 1 Replies
View Related
Sep 6, 2012
If my file is like so
A1 B1 C1 D1 E1
A2 B2 C2 D2 E2
A3 B3 C3 D3 E3
i NEED THE OUTPUT IN NOTEPAD
A1B1 C1 D2 E1
A2 B2 C2 D3E2
The spacing varies from row to row
if i am saveing as notepad file....in macro how can i give the spacing properties give an example macro and i will customize it according to my need
View 2 Replies
View Related
Aug 30, 2013
She has a spreadsheet created in Excel 2003 (she is still using 2003) which contains an image with a textbox in the top left corner then all other cells contain data.
When user prints this spreadsheet all that prints is the image and the textbox.
I have cleared the print area reset the print area removed the picture (prints only the text box)
and none of these changes have changed what prints.
I have checked all printer setting and these appear normal.
previously user could print this spreadsheet fine and all other worksheets in the workbook print fine as well.
other users are still able to print to the same printer correctly from this spreadsheet.
View 2 Replies
View Related
Feb 14, 2012
I have a table in Excel 2007, one set of data in a column contains cells with data such as = AA701 DIS34 5283000, Z00IS0750 Now these AA codes DIS codes 5283 codes and Z00 codes can all be different!! and they are all within the same cell.
What I need to be able to do is find out which AA code which DIS code which 5283 code and which Z00 code is reported within each cell on each row?
So could I split them out into different cells via VBA? or can I do some kind of lookup that picks up a AA code (for example) ?
The constraints I have is this is downloading from a web query, I do not have the ability to alter the way the original data is coming across, I can only alter it once I have received it - refresh and then alter it again.
View 9 Replies
View Related
Feb 22, 2007
I am after a macro to do the following, my visual basic skills are very limited (non existant):- Look at the date in cell A1 on Sheet 'Live Report' and err 'remember it' Copy a range of cells from A3 to A10 on 'Live Report' Go to sheet 'Monthly Summary' and find the date that had been remembered previously (this date will be in column A on 'Monthly Summary' which will probably be a mixture of values and formulas). After the date has been found paste special and transpose the 'values only' copied range from 'Live Report' (A3 to A10) in column B on 'Monthly Summary' next to the date that has been found in Column A.
View 2 Replies
View Related
Sep 23, 2013
I am trying to export a range of data from excel to xml. I have a module that puts the range of data into one cell:
Code:
Function Concat(myRng As Range)
Dim myStr As String
Dim c As Range
myStr = ""
For Each c In myRng
If c.Value "" Then myStr = myStr & ", " & Chr(34) & c.Value & Chr(34)
Next
Concat = Mid(myStr, 2, 9999)
End Function
How to all data to come in with one decimal place (eg. "4.5","5.0",7.0")
Right now it looks like this:
("4.5","5",7")
View 3 Replies
View Related
Mar 4, 2013
Currently I am working on a system uploading data from word(with what i think has a script) into a database one by one.(template of somesort) the data is stored into the database in word format.
can i place all the data in rows then get excel to transfer cell content into word and wait for it to upload then clear the contents(word) then do the next row(excel) until it did every cell that's filled? do i need any other applications for this one or can excel alone do it? i'd also like to add a new tab to excel for the command on when excel will do this.
View 4 Replies
View Related
Sep 10, 2013
I have created an Excel spreadsheet in 2007. When a friend opens the workbook in Excel 2013, It does not let him add data to the cells. ( just one column which is the "date" column) The worksheet is not locked or protected.
When I right-click on the column and goto format cells, protection, the box is ticked, but the note says this doesn't take effect unless the sheet is protected witch it isnt.
View 6 Replies
View Related
Jul 20, 2012
I have a Workbook (Test 1) with several columns A-S. I'd like to be able to continue to add data into Test 1, and have some of the data pulled into a new Workbook (Test 2). Basically pulling data from Test 1, cols. D, L, J, E, I, C, K, Q and S - into the new workbook Test 2.
Some of the columns in Test 1 have conditional formatting and data validations, but I need the data in these columns to be replicated into Test 2 - without having to copy/paste between the 2 workbooks.
I figured how to do this in Excel 2010, but my office is still using 2007 and I can't seem to get it to work....
View 1 Replies
View Related
Mar 19, 2007
How do you print on paper a formula that is in one cell?
View 9 Replies
View Related
Nov 24, 2011
i have a problem in that i need to generate a random 6 digit number preceeded by an X if the data in column B is either blank or 0. This needs to be filled in if the adjacent cell in column C has data in. i am a moderate macro writer and am finding this part quite challenging.
i am ussing excel 2007.
View 3 Replies
View Related
Dec 3, 2012
I'm trying to create a very simple order form. It's been a while since I've done this in Excel, and I couldn't find an answer when I searched. (I may be a lousy searcher, though.)
I want the user to enter a quantity in Column E of the "Common Items" worksheet, and have all the rows with quantities copied to the "Order" worksheet. (On the "Order" copy below, I just did a copy/paste to show the desired effect.)
Excel 2007
A
B
C
D
E
F
1
Item Number
Description
Unit
Price
Qty
Total
2
BX-2B1324X
0.9% NaCL 1000ml Bags
CS
$23.52
5
$117.60
[Code] ....
I'm pretty sure this can be accomplished with an If/Then, but I'm lost! Optimally, they'd enter their quantities, click on the Order sheet and hit print.
View 5 Replies
View Related
Dec 5, 2011
I wish to select all the cells which contain the word " Available " in column A at once . But i didn't find any option to do so using excel's Go TO Special feature.
I am using Excel 2010.
View 4 Replies
View Related
May 3, 2014
How to select the value from each cell/row from excel sheet and transfer it to notepad and print it.
View 1 Replies
View Related
Apr 11, 2008
I have a report that is generated from a manufacturing process that looks like the example below. the report is 40 pages long when all the data is printed. i am looking for a way to only print this range if a dimension is "out of tolerance". if the dimension is within tolerance, there is always the "garbage" text of plus and minus. if every row is "within tolerance" in the range the cells in the OutTol column would all contain the "garbage" text but it will not always be identical. so, in summary, actual OutTol values = print and all "garbage" = not printed.
NomActDevLoTolUpTolOutTol
Y-0.956-0.9480.008-0.0030.0030.005
Z-1.413-1.4130.000-0.0030.003---*|++++
DIA0.4220.4240.002-0.0030.006----|+*++
POS0.0160.0110.005
View 9 Replies
View Related
Feb 5, 2014
I have a 2010 Excel spreadsheet where I have a macro set up to print the page. What I need it to do though is to increase a number in a cell and display it each time I print the page.
View 9 Replies
View Related
Sep 12, 2013
I need to develope a macro for Excel to calculate desired profit margin depending on our cost of each item. Here's the scenario.
A1: landing cost
If 0
View 4 Replies
View Related
Dec 25, 2009
i need away that will give me the way to pull data from specified place
in txt file to A1 cell in excel sheet3
View 9 Replies
View Related
Feb 15, 2013
Excel 2010
I have the following SUMIFS formula that produces the desired results until I get the the last qualifier, displayed in red:
=SUMIFS(JBHAMOUNT,JBHMONTH,C18,BNSFCATEGORY,B20,BNSFLOCATION,"Alliance")
The result of this formula is: #VALUE!
View 2 Replies
View Related
Feb 4, 2010
i have data in a cell that i must view in the sheet and in the print area
but do not want it to print
View 9 Replies
View Related
Oct 8, 2013
I have a file having 9000 rows with S.No. 1,2,3,4 etc. ,in ascending order.It has downloaded from available system in the company.
Can it be possible the file be in the format of desired sheet ( attach file ) through macro working or excel formulaes which is best suitable for the achieving?
For more clarification, refer the attach file of download sheet and Desired Sheet.
View 4 Replies
View Related
Mar 18, 2007
I have a three or four letter abbreviation of a last name in A1. Column C contains a list of Last Names; column D contains a list of corresponding First Names; and column E contains a formula concantenating the First Names and Last Names from columns C & D.
I have the following formula in B1:
=VLOOKUP(A1,C1:E44,3,1)
I am attempting to match up the three or four letter abbreviation with the concatenated list to return the full name (First and Last) in cell B1, however, I'm not getting the desire result. I keep getting the name in the row just above the name I want.
View 9 Replies
View Related
Nov 23, 2006
I have a sheet with following columns
Zones Month Revenue
Zone1 Apr-05 1111
Zone2 Apr-05 2222
Zone3 Apr-05 1222
Zone1 May-05 1451
Zone2 May-05 452
Zone3 May-05 4622
Zone1 Jun-05 891
Zone2 Jun-05 255
Zone3 Jun-05 1555
and so on all zones revenue each month.
I am learning Pivot table and struck at a point.
I am able to do simple pivot table but now want the following result
1. All the three zones in row fields.
2. Months in column field.
3. Revenue and running total of revenue (progressive sum) for all the months of desired financial years. ( I can get revenue and running total separately but I want these in alternate columns ie Revenue Apr-05, Revenue upto Apr-05, Revenue May-05, Revenue upto May-05 and so on)
Also how to get data for desired financial year only as 2005-06 (Apr-05 to March 06) or 06-07 (Apr-06 to Oct-06)?
View 9 Replies
View Related
