Change A Series Of Rows.
Feb 12, 2009I want to change the values arranged in the row wise to the format I have attached in the excel sheet. Manually it would be very tiresome.
View 4 Replies
ADVERTISEMENT
Change Chart Data Series (rows) Using Named Ranges?
Mar 13, 2013I have a chart in a workbook that works fine by looking at the following data series:
=Workings!$A$2:$C$35
In the data series above...where the numbers are 2 and 35 I have named ranges "CHART_Start_Row" and "CHART_End_Row" which will change dynamically as appropriate and can replace these static numbers - but how do I incorporate these named ranges into the data series reference?
Change Colour Of Chart Series
Jan 4, 2010I'm attempting to write a code that will change the colour of a series in a chart based on the name of each series. i.e. I have Roads, Water and Rail as three of my series names. can i somehow assign the colours yellow, blue and red to these series using macro code.
View 5 Replies View RelatedStacked Area Chart Series Colour Change
Jan 6, 2010I have a stacked area chart located on its own individual worksheet. I would like to use VBA to apply colours to individual series based on the name of that series. I have applied the following code which I found on the following help forum, changing it slightly to fit my needs: http://www.ozgrid.com/forum/showthread.php?t=91381
View 3 Replies View RelatedChange Color Of Chart Series Based On Source Value
Apr 23, 2008it is possible to have the series of a stacked graph to change color based on the source value.
e.g.
i have a stacked cone graph made up of 5 piece (series)
i need each piece colored either green, yellow or red depending on whether its value is large than another
Change Order For Chart Series Collection Macro Code
Mar 18, 2008I have a bar graph with 2 series of data. Anyone knows how I can specify the order in which they appear? code looks similar to the following. The bar graph shows the second series before the first series. How do I reverse the order?
With cht
.ChartType = xlColumnClustered
' first data series
Set ser = .SeriesCollection.NewSeries
With ser
.Values = someValues
.XValues = someValues
End With
' second data series
Set ser = .SeriesCollection.NewSeries
With ser
.Values = someValues
.XValues = someValues
End With
Excel VBA - Change Marker Styles For All Series Excluding Unmarked Lines
Aug 4, 2014I have a macro that changes the marker style for all series in a scatter chart, chosen through an input box.
[Code].....
It works nicely, but I want it to exclude any series that do not have markers (i.e. lines used to indicate a reference value). I've tried an if-then statement after the With statement, but it will add markers to any line series:
[Code] ......
Basically, if the series has markers or line+markers, I want it to change the marker style, otherwise do nothing with the series.
Creating New Rows From A Series
Feb 21, 2008I have a need to expand data rows such as the following example:
A cell in a column of alphanumeric characters contains for example: 9,2,36J,10-13,42L-42N
In this example I need to replace this row with 10 new rows (deleting the orginal) so they would be expressed like this:
9
2
36J
10
11
12
13
42L
42M
42N
Formatting Series Of Rows According To Column Value
Aug 23, 2007I have a large datset that looks like this:
++++++++++++++++++++++++++++++++++
+ + A + B + C +
++++++++++++++++++++++++++++++++++
+1+ ID + EventDate + EventType +
+2+ 111 + 1/1/1995 + Visit +
+3+ 111 + 1/30/1995 + Vaccine +
+4+ 111 + 4/22/1998 + Visit +
+5+ 222 + 7/7/2000 + Survey +
+6+ 333 + 8/8/2001 + Labs +
+7+ 333 + 8/22/07 + Pharmacy +
+8+ 333 + 8/22/07 + Visit +
I would like to shade the rows with alternating colors so that all the data pertaining to a given ID can be easily spotted. In the example above, I would need A2:C4 to be shaded one color, A5:C5 another color, and A6:C8 the first color again.
I am using Excel 2007.
Using Autofilter To Select A Series Of Rows
Aug 24, 2004I intend to create reports from a master sheet.
The master sheet contains company information; each row represents a (company)record.
The first column contains the country code where the company resides, e.g. DE.
I dug up this piece of
For i = 12 To 1 Step -1
Set rngAutoFilter = Cells(1, i)
rngAutoFilter.AutoFilter Field:=1, Criteria1:="DE"
Range(rngAutoFilter, rngAutoFilter.End(xlDown)).SpecialCells(xlCellTypeVisible).Copy _
Destination:=Worksheets("Sheet2").Cells(1, i)
rngAutoFilter.AutoFilter
Next i
I found this code to work allright but, it only copies the singel cells containing "DE" and the topfirst row. At least that is what is the visible result.
How do I modify this code to copy EACH complete row containing "DE" in the first column?
Inserting Blank Rows Between Different Series Of Data?
Sep 3, 2013I would like to know how can i insert a blank row in between ACC# when ever a new series of data begins
name Acc # Balance Date
John 2222 200 june 2013
John 2222 344 june 2013
John 2222 700 Sept 2013
Silva 4444 333 June 2013
Silva 4444 333 June 2013
Silva 4444 333 June 2013
Raff 5555 897 June 2015
Raff 5555 897 June 2015
Raff 5555 897 June 2015
Raff 5555 897 June 2015
Macro - Fill Series Requires Two Rows Of Data!
Aug 18, 2007regards the two attached files (both are identical) except '1' has TWO Rows of data above the Macro Button and works correctly whereas '2' has only ONE Row (the desired option but does not work correctly!( Inserts Row in wrong place and incorrectly fill series)).
basically the program inserts a additional row below the last data entered, copies a formula cell from above and finally (the problem area) Series Fills a cell from data above.
Transposing Column Series Of Data To 2nd Sheet In Rows
Jun 19, 2008I have a column with (for example) 5 entries A1, A2, A3, and so on. I would like to pick up this data, tranpose it into a row, put it on the 2nd sheet, but (again for example) be specific about where i want it to go. I may want to have A1 at B2, A2 at E2, A3 at H2, etc
-A B C D E F G H
1x
2y
3z
4
5
becomes
-A B C D E F G H
1
2 -x - - y - - z
3
4
5
Chart Wizard Limited To 6 Rows Of Data For Series
Nov 24, 2009I am trying to create a line graph and I have 17 rows of data for 17 different employees. There are 18 rows when including the header row.
My data is as follows
Column A - Employee Name
Column B - Month 1 data
Column C - Month 2 data
Column D - Month 3 data
Column E - Month 4 data
Column F - Month 5 data
When I highlight the data and go to the chart wizard, I select "Series in Rows".
However, on the series tab it only brings in the data for 6 employees.
Is there a way to automatically bring in all the data without having to do it manually, or is this a limitation of Excel?
Macro: Plot Graph/Chart By Series Of Rows
Jun 30, 2008I've been trying to work out a code for a while now to plot some series in rows on a graph. The wonderful Mr Pope helped me with one before but for series in columns but i just don't seem to understand it enough to use it for this problem. the graph already has 2 series plotted (called the envelope) so i have to use seperate series to plot the data.
Basically the name of series is down column A
but the range is from E1 to Y1
and the data to be plotted on the graph which already has two series plotted in it is E2 to Y2, E3 to Y3 etc. iv been trying to use this code but failing miserably
Sub adddatatopsd(Name As Range, XData As Range, YData As Range)
With ActiveSheet.ChartObjects(1).Chart
With .SeriesCollection.NewSeries
.ChartType = xlColumnClustered
.XValues = XData
.Values = YData
.Name = Name
.ChartType = xlXYScatterSmooth
End With
End With
End Sub...........................
Convert Hourly Time Series Data From Rows To Single Column
Jan 8, 2014I have A:1 - X365 filled with hourly energy prices for 2013. I need to convert these to a single column - A1:A8760. I have tried writing some code and some macros with no success.
If I were to do it manually 365 times, the macro would look like this:
Copy Row A1:X1
select sheet 2
Paste Special > Transpose (fills A1:A24)
repeat for rows 2-365
Tried using this from a previous post, but it takes A1:A24 then B1:B24 and so on and makes them a single column - so it doesn't work unfortunately.
Sub MakeColumn()
Dim rng As Range
Dim LastRowSrc As Long
Dim LastRowDst As Long
Set rng = Worksheets("Sheet1").Range("A1")
[Code] .....
200 Series But Get (The Maximum Number Of Series Per Chart Is 255) Error Message
Aug 4, 2014I run a large simulation experiment. I have a loop plotting data in excel of a user defined area. Because of the limit of 255 series I have allowed a maximum of 250 simulations (they all need to be plotted). But the length of each simulation is free. I know there is a limit of 32.000 data points in a graph and I have this as a condition too.
If I set the data range to 100 columns and 3000 rows the graph is produced when I plot by columns. (code below)
But if I set the data range to 250 columns and 1000 rows I get the above mentioned error message. Even though I only have 250 series.
After the data is plotted it is the code below that gets the error:
[Code] .....
Line Chart - Remove Series Code But What If No Series Exists?
Dec 22, 2011I have the following code:
Sub Macro5()
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveChart.SeriesCollection(1).Delete
ActiveChart.SeriesCollection(2).Delete
End Sub
However, if there is no SereisCollection(1) actually present in the chart I get an error. How can I work around this? I will need an IF statement I assume, just not sure what it will look like.
Show Chart Data Series Labels On All Series. 2007
May 31, 2008I just recently installed Excel 2007 and I would like to know if it's possible to change all data points of a chart at the same time. In Excel 2003, I would normally hold down shift while clicking on each of the data points to make a global change. However, it appears I cannot do that in 2007.
I would like to display each data point's series name. When I go to Layout on the Excel Ribbon, and click on "Data Labels", and click on "More Data Label Options", the actual Y-axis values are shown for each data point. However, I do not want this - I actually only want the Series Name, but when I uncheck "Value" and check "Series Name" instead (under "Label Contains"), it only changes it for one of the series. Is there a better way, instead of going through each and every single series to make this change?
Spurious XY Scatter Chart Series Adding Series
Aug 21, 2006The following code is supposed to produce six series on an xlXYScatter chart. It produces seven with the seventh series being a repeat of the sixth but named series 7.
Sub Chart2()
Dim DataRange As Range
Dim CellString As String 'Stores a cell range in the form "AA27:AB39"
Dim CurrentSeries As Integer
Dim SeasonCount As Integer
Worksheets("Hemisphere").ChartObjects(2).Activate
CurrentSeries = 1 ............
Color Pivot Chart Series Dependant On Series Name
Jun 24, 2008I have a list of data on one sheet and a 'reports' page on another sheet. The reports page has several pivot tables and a pivot chart. I want the pivot chart to format the bars on the chart relevant to the series name. The series names are "R" "A" amd "G" for Red Amber and Green respectively, I want the chart to change the colour of the series so that it is the correct colour ie. "R" would be coloured Red, "A" would be Amber and "G" would be green.
Sub PivotLoader()
Dim Red As Integer
Dim Amber As Integer
Dim Green As Integer
Red = Range("H9").Value
Amber = Range("H10").Value
Green = Range("H11").Value
Range("B8").Select
ActiveSheet.PivotTables("PivotTable4").PivotCache.Refresh
Range("D25").Select
ActiveWindow.SmallScroll Down:=18
Range("B49").Select...........................
Summing Series Of Maximums In Larger Series
Aug 22, 2014I consider myself decent at Excel, but I don't have quite the depth of knowledge I would like. Here is my issue:
I currently have a series of 50 numbers for each row on a 300 row spreadsheet. I would like to write a formula that identifies the six largest numbers in that series and adds them together. So, for example, if the series was 8-6-4-4-4-5-1-1-0-15-3-9, the formula would spit out 47 (15+9+8+6+5+4)
How do I write that kind of formula?
Chart - Second Series Starts Where First Series Ends?
Sep 21, 2011I would like to have two series of data using the same X axis (date, formatted in months). The Y axis is in intervals of 100,000.
The first data series is historical (actual) data (i.e. Jan 2009 to August 2011). The second data series is forecast (Sept 2011 - August 2012). So i want the forecast series to start immediately after the historical series. It is a 'line with markers' chart. The key objective is that the forecast data looks visually distinct from the historial series.
Excel version: Excel 2010
OS: Windows 7
Color Bar Chart Series Based On Series Name
May 15, 2008I'm using the following code to set the colours of the slices of all the pie charts in my spreadsheet based on each slice's legend's label: ....
View 9 Replies View RelatedChange Chart Series Pasted From Another Chart
Jun 19, 2008I want to use a macro to change attributes of a series in a chart. Unbelievably, if the series has been pasted into the chart from another chart, and although the macro can address the series and even return values (eg name) correctly, the selection simply cycles to one of the original series on the chart.
View 3 Replies View RelatedCant Change Date On Some Rows
Nov 12, 2009why I cant change the date format for some of these rows?
Im trying to modify a excel file sent to me by a client but some of the fields seem to be messed up.
Could somebody explain what i must do to get all the rows in a format
yyyy-mm-dd
i have already tried to format the cells, but only some rows update!!
Change Rows To Columns
Aug 3, 2006This is really hard to explain by words. check the 2 files I attached in this post. I checked VIRUS already. NO VIRUS. I have the table like in FROM.xls and I want to change it to a table like in BECOME.xls -automatically- because I have more than 5000 records in my 'real' file.
View 5 Replies View RelatedChange Formatting Of Rows When Value Changes In Column
Mar 17, 2009I have a spreadsheet where one column will determine the color of the entire row....if the sales persons name in column B = "Dew", the entire row should be shaded light blue. if the name is "Swiger" they should be white, when its Webb, it should be light blue again- alternatively, at every change in value in that column, alternate the entire rows shade - when the sales person name changes from Dew to Swiger, change the shading of Swigers Rows to white, when it changes from Swiger to Webb, make Webb's rows shaded the same blue as Dew's row's were....there are multiple rows for each sales person.
View 3 Replies View RelatedHow To Sort Table After Change Of Rows
Oct 2, 2013How to autosort table after a row change.
View 1 Replies View RelatedHow To Change 3 Rows Of Numbers Into A Date
Nov 27, 2013I was wondering is there a formula to change three rows of numbers into a date?
Example:
COL.....A...B....C
ROW....1...1..1986
How do I change the 1 1 1986 to say 1/1/1986 as a date without having to physically type it?