Check Whether All The Formulas Are Dragged Down Correctly
Nov 16, 2009
How to create a macro tool to check whether all the formulas are dragged down correctly? Because someone may accidentally make some changes to some cells.
For example,
A1=IF(NOT($B1), -SUMIF(PCAInfo'!$C1, AQ$10:AQ$150),0)
A2=IF(NOT($B2), -SUMIF(PCAInfo'!$C2, AQ$10:AQ$150),0)
A3=IF(NOT($B4), -SUMIF(PCAInfo'!$C1, AQ$10:AQ$150),0)
A4=IF(NOT($B4), B4-SUMIF(PCAInfo'!$C4, AQ$10:AQ$150),0)
The code could test out
A2 is correct,
A3 and A4 is not correct.
Example: I renamed cell A1 to Apple, A2 to Banana, A3 to Chair. Down in cell a50 I was using simple formulas a1+a2*a3. then copying the formula into column b50, c50,... Now when I use the formula SUM(Apple+Banana*Chair) and try to copy it into cell b50, It doesnt change the formula to SUM(B1+B2*B3).
I am trying to check a user input to see if the user has entered the date correctly. I am using the code below but it keeps giving me a "Type Mismatch" error.
From the title "Filling Down Formula From Source That Goes Horisontally" I hope that someone understands what I mean. If I try to autofill a formula where the source cells that I want to autofill is organised in an horisontal fashion instead of vertical fashion, then the autofill always goes in an vertical fashion. Is there a way to get around this, macro, formula?
I have trouble using the =Concatenate() or =(A1&B1) to combine data in one cell. It will work for the first cell but then when I drag the equation it gives me the exact same result as the first cell. But when I click to look at the formula it looks good and when I hit Enter the cell reads the correct value. So I have to open each individual cell and hit enter. What is goin on here. I have attached a small example.
Also, sometimes I will type in a formula and hit enter and it just displays the formula. It does not return a value.
I am trying to find a short way of creating a list using the drag down tool. Normally this isn't a problem when the numbers are at the end of the data, however they are in the middle so the drag down tool does not like it and will only copy the same data into the cells below.
Eg. the list I am creating goes as follows:
Dicso 80Gb: Cyber Records Barcodes: CR 001. ai Disco 80Gb: Cyber Records Barcodes: CR 002.ai Disco 80Gb: Cyber Records Barcodes: CR 003.ai
...and so on.
How do I create the formula to recognise that I want the number within the text to increase by 1 each time?
I currently have a VB macro written where under certain conditions user forms are shown for the user to select options, display messages, etc. When any of these forms are on the screen, and someone drags them, the menu image is 'dragged' across the screen. Is there a way from preventing this from happening?
My worksheet "Ledger" has a column of 1-31 days, with row headings of MC/Visa, Amex, Disc & Cash. I also have sheets "1-31" within the same workbook that contain the data I need under each heading. I can get the data for "Amex" in sheet "1" to appear in the first cell underneath "Amex" in the sheet "ledger" by typing the formula ='1'!$B$29.....
I have a variety of different order forms in workbooks titled IT1314-0001, IT1314-0002, IT1314-0003...etc... They're all stored in the same location, but they need to be on different workbooks as each workbook is sent as an order form to a different organization, for that organization to fill in. All of the order forms have the same layout, but the user will input different information onto them.
In a summary workbook of all of these Order Forms, I need to be able to drag down an INDEX formula, such that the INDEX looks in a different workbook (the next workbook in the sequence) with each row. As you go down the rows, it should look like;
INDEX(‘[IT1314-0001.xlsPARTS A & B!$D$5:$E$5, 1, 1) INDEX(‘[IT1314-0002.xlsPARTS A & B!$D$5:$E$5, 1, 1) INDEX(‘[IT1314-0003.xlsPARTS A & B!$D$5:$E$5, 1, 1) INDEX(‘[IT1314-0004.xlsPARTS A & B!$D$5:$E$5, 1, 1)
need to do to the below code so that when i drag the formula down it changes the sheet number....sheet1, sheet2, sheet3 and so on but keeps the cell reference the same?
I am creating a tool that is populating information off of another excel document and presenting the information in a different format then the data originally appears. Basically I am unsure how to create a formula, for example, in cell A1, that as I drag it down (A2, A3, etc) the column letter in the formula advances but the row number remains the same. In another words as the formula moves into cell A2, the "Sheet1!D3" changes to "Sheet1!E3", where as normally it would advance to "Sheet1!D4". I just started back up in excel, im sure this is way easier then I am making it seem but I have been unable to come up with a solution.
how to use some form of the saveas dialog within excel without quotes appearing in the filename that is passed to the dialog.
For example:
ChDir ("J:TestFolder")
x = Application.GetSaveAsFilename("Test.xls", "Excel files (*.xl*),*.xl*", 1, "Custom Dialog Title")
The above code displays the saveas dialog form but has "Test.xls" surrounded by quotes. Normally, there would be no quotes around the specified filename.
Is there another way I can do this or will I just have to live with it?
A customer is eligible for a discount if the customer’s 2009 sales are greater than or equal to 200000 OR if the customers First Order was placed in 2012. " If its true it would be yes and if false no"
So far i have in the IF function =IF([@[2009 sales]]>= 200000 ,"Y","N")
How should i insert if the customers OR First Order was placed in 2012?
I have used the Excel program for a number of years to print out "Jukebox Title Strips" for my Jukebox. I have used the same "formula" for cell height, width, etc. during that time.
The outline of the title strips are preprinted and perforated on an 8.5" x 11" sheet. I recently tried to make some new strips and the printing does not line up correctly as it always had done in the past. Now, the titles are not high enough on the top portion of the sheet, and not low enough on the bottom portion of the sheet. So, it is not that I could just raise everything up or lower everything down to line up correctly... it now has to be changed in both directions. Of the 20 title strips on the sheet, the only ones that line up correctly are the two that are halfway down.
I thought that somehow the file had become corrupted, so I made a new template, but I still have the same problem.
Are there any suggestions of what I could do?
In the links below it shows an example of a Title Strip page.
I have three columns expressing death dates (date, month, year). The months and dates are finally sorting correctly within the same year, but I have it set to sort by year first.
The column starts off fine with 1860, goes up to 2013, then starts back at 1884 and goes back up to 2009. I can't find any difference between the two groups: there are some of the same years represented, there are blank month and date cells in both. I have a worksheet with birth dates that sorted fine; the only difference I can find is that birth dates only go up to 1997, but the column is formatted as General, so the turn of the century shouldn't be a problem.
I've tried highlighting the whole thing before sorting as well as selecting one cell as usual. I've also tried formatting the column as Text. I can't think of anything else.
I have a userform with several inputs which are validated, and should the input be invalid an ErrorProcedure is run. This basically displays a message telling the user what is wrong, and it should also be highlighting the text in the relevant field, but for some reason it is not doing that.
Linking two comboboxes. Actually My department consists of 4 divisions and each division contains 3 sections, that is beside Department manager staff and planning group.
In the attached workbook:
- Combobox1 contains All divisions, Department manager staff and planning group) - Combobox2 contains all sections of the selected division in Combobox1.
What I want to do is the following:
In Combox1, I want to hide all records not related to the selected division. In Combox1, I want to hide all records not related to the selected section.
Remarks:
I depend for filtering on the org. code for each division and section.
Fifth and Sixth digits of the first Division's Org. Code are 21
Fifth and Sixth digits of the second Division's Org. Code are 22
Fifth and Sixth digits of the third Division's Org. Code are 23
Fifth and Sixth digits of the third Division's Org. Code are 24
First section's org. code for each division ends with 11
Second Section's org. code for each division ends with 21
Third Section's org. code for each division ends with 31
I have created the following VBA codes to reach the said purposes, the first three ptions in Combobox1 work just fine, but the other options sometimes work fine and other times don't!
Moreover, Combobox 2 is not working at all:
Code: Private Sub ComboBox1_Change() On Error Resume Next Application.ScreenUpdating = False Select Case ComboBox1 Case Is = [AC4].Value
I'm trying to simply reference a cell from another tab in the same workbook. In other words I press "=" and then point to the cell in another tab and I would expect to see that value - however I don't. What I see, as an example, is: ='Nav&SPDiary'!B24 instead of the cell value (which I know exists because I've just pointed to it.
Anyone have ANY idea why all of a sudden it's started to do this? The most annoying thing is it worked fine before and now it doesn't do what I want...
I've got a text box with some commentary in the middle of a spreadsheet. The text looks fine on screen, but when I print, it chops the end off some of the words. Is there a way round this?
I have a userform with a combo box that is populated from a list in a sheet called Clients. The userform is in the same workbook as the Clients sheet. This workbook called "Client List.xls" and is set to be hidden from view. I've created a menu bar icon that loads the "Client List.xls" workbook, and on open runs the initialize procedure. The problem seems to be caused by the "Clients List.xls" being not the active workbook. Is this the case? Is there a way around it? If I unhide the workbook and make it the active workbook, the code works great.
Private Sub UserForm_Initialize() Dim rngClients As Range Dim wsSheet As Worksheet Set wsSheet = Workbooks("Client List.xls").Sheets("Clients") With wsSheet .Range("a65536").End(xlUp).Select .Range(Selection, "A1").Select End With Set rngClients = Selection With cmbClients .RowSource = rngClients.Address .ListIndex = 0 End With
The MsgBox's are merely for debugging. When the code above runs, the first MsgBox I receive states similar to: "vSh 14.238964 vOp 45.23 vCash 1000" The second MsgBox, from after the multiplication, states: "vCash 1000"
For some reason the vCash variable just will not set. At the beginning of the code, I declared each variable as Dim var, meaning as a variant, and whenever I debug by halting during a MsgBox display, each of the variables appear to be the same types: Variant/Double.
I have a command button on my form that unloads it when i am finished. But i have to press it 20 times before it closes. The only line i have in the code is "UnLoad Me"
In cell BQ65, I have 7:00 pm. Next to that, in cell BR65, I have 6:00 am. This should total 11.00 hours, yet with the formula I have in cell BS65, the result is showing up as 13.00 hours, so I'm ending up with two extra hours, which is not good.
I created a data entry form that contains a ComboBox. The ComboBox is based on a range that has three columns and many rows. The purpose is to have the user select an item from the first column, and the other two columns are automatically filled in on the table.
The form works and the data is transferred to the table as it should. The issue is that when you select the ComboBox, it displays the data from all three columns wrapped in two columns. Some of the data is repeated and it looks confusing. How do I have the drop down show only the data in the first column?
