I've got two text boxes where users input the dates in specified format (dd/mm/yyyy). current validation checks whether one date is not earlier than the other one and it looks like this:
[Code] .....
However if they are equal which suits me I am still getting an error. don't need a calendar btw
Is there a code in vba, that will return today's date (or the date of the week before, [today-7]) I need a vba code that will check a current cell - let say cell "A1", that contains a date( for exmpel: 12/7/09), and compare this date to the date last week, if the cell (A1)contains a date that is older then last week , then fill in A2 with "False", if the date in A1 is between the date of today and a week ago then fill A2 with "True". (For the exmple that I gave of course in A2 the value will be "False")
In our program it is essential that only data is entered for the current week.
I need code that if a date is entered into "cell C1",that it will evaluate this value and compare and assure that it is between the dates in Range D1:E1 (upper and lower values)
If it is between these two dates, nothing happens and you can proceed to enter data.
If it is not message -Invalid date entered. Proceed? If "Yes" nothing happens and you can proceed to enter data! If "No", then the value in cell C1 is set to nothing and allows you to enter the correct date.
I need to be allowed to enter an incorrect date at times,to review and check previous entries, 99% of the time it must be between the start and stop date.
I have a SUMIFS formula that I am having trouble with. I am trying to check the following:
=SUMIFS(NFCU!$G$5:$G$298,NFCU!$E$5:$E$298,NFCU!$H$2,NFCU!$A$5:$A$298,"<e1")
The range NFCU!$A$5:$A$300 is a column of dates. The evaluation of "<e1" does not seem to evaluate. However, when I change "<e1" to a date value of 41760 it works. How can I reference a field rather than the raw value?
i need to check a date within a multiple range of dates using certain key.
i've tried vlookup, but failed to get correct answer.
here is Table1
product (cell=A1)
date (cell=B1)
plan(cell=C1)
A
20080801
A
20090801
A
20090901
A
20090831
A
20090101
A
20091101.....................
I've a userform with just textboxes and have written code that checks each textbox in turn to ensure a correct value has been entered. I want to run the code after any changes are made; where then would I insert the code? Userform.click doesn't appear to work nor keypress. Would I have to enter the code in each textbox_afterupdate?
View 9 Replies View RelatedI have a user form that writes data to a worksheet (Sheet1)
Is there any way of getting a macro to check what is in "textbox1" against all the entries in column A of "Sheet1"?...........and bring back a message if it already exists?
Is there a way I can check an excel workbook's created and last modifed dates using a macro in that same workbook?
View 3 Replies View RelatedI am trying to build a user form to find out the customers who purchase more than $1,000 during a certain period. The userform has two inputs:
One is to select the data range of customer information. Assume all customer information are in the cell A2: H10, how shall I write the error checking code if the user selects the range which is out of (A2:H10)? message box would be " You selection include invalid data, please check"..
The other input is called " Get data past this data", and I can enter a date in the following cell ( txtDate). Regarding the error checking, I am thinking to use IsDate() function to make sure it is a valid date. Will be there be any other error checking you will recommend?
I am trying to query my data, which includes a date field. If the user changes the date, I want to perform certain actions. Once I find the record, I can update all the fields with the userform. However, I can't compare the date in the userform with the date I have found so that it will follow a different course of action. Using the following I get the message whether I change the date or not.
VB:
If VisitorForm.txtLastVisit.Value <> FoundCell.Offset(0, -3).Value Then
MsgBox "Dates Don't Match", vbExclamation, "Sorry"
Exit Sub
End If
If I change the "<>" to "=", the routine stops whether I change the date or not. Something's working, but not right.
I did find that the userform sets the format to mm/dd/yyyy although the data is mm/dd/yy. But I've tried changing the data format and it made no difference.
i am trying to make a user form with two msg boxes (To and From Date). In excel spreadsheet It was rather easy to bring a popup msg if they were invalid under some stated rules. see below a rationale of the rules where A3=From Date and B3 To Date and the desired outcome of is:
[Code] .......
So i wonder if it is possible to make a VBA code to validate these two dates? and bring a warning msg after keypress or after pressing submitcmd or any other available if available.
I have a UserForm that is designed to allow the user to filter dates on various columns. There are three comboBoxes on this sheet that are populated by linking to cells on a Control worksheet using RowSource in the Properties window. catCombo is the column to filter, dateCombo and endCombo are the two dates to filter between.
I have come up with the following code to activate filters, but there are problems (which I'll tell you about in a sec!):
I have created a user form where I have two Dates fields. Date Leave (three comboxes, CmbDay, CmbMonth and CmbYear) and then I have written the following code
Private Sub Label4_Click()
If CmbDay.ListIndex -1 And CmbMonth.ListIndex -1 And CmbYear.ListIndex -1 Then
If IsDate(CmbDay & " " & CmbMonth & " " & CmbYear) Then
MsgBox "You selected " & Format(CmbDay & " " & CmbMonth & " " & CmbYear, "dd/mm/yyyy"), , "Date selected"
[Code]....
I have got the code from there.
But I want the show the same date field in another field as Date Join. I have changed the names of Combo Boxes but it is not working.
I want to show the same combo boxes in another field. How do I do that?
With the attached spreadsheet what I am trying to do is create a userform sheet that I can use to look up a specific date within the spreadseet. First of all I somehow need to populate the drop down box with all the dates that are located in the sheet. From there I would like a macro to go through my workbork and find all the selected dates and bring back the "Task #" and Site Name associated with the dates
For example if I put Mon 09 Jun in the macro will bring back
Site one - Task 1
Site three - Task 2
Site two - Task 1
I have an issue with a userform that needs to pull and insert dates.
This hinges on several formulas and pivot tables plus eventually gets imported into access so my needs as shows will not be all that flexible.
this needs to be input as "05/01/2012" but read as "MAY", the userform needs to display the date in a method that makes sense to my temp/seasonal users (mmmm format preferred) but needs to be in the cell as mm/dd/yyyy so the formulas and pivot tables can make properly read them. I have been trying this for months and it seems i can get all the parts working independant but not all at once.
The default reads fine and it inputs fine but the drop down has excel date codes (40156, 40187, etc)
The default is fine and inputs the date AS "mmmm" format but cant be read by the forumalas or access.
I am open to examples like making the combo box populate another textbox or field on the form but haven't gotten that to work yet either. Example files and picture in the link [URL] .......
I have a UserForm with several text boxes where dates are input, the user form is acts as a data entry form so the text boxes are not linked to individual cells. My problem is that when the dates are entered into my worksheet they are in Text Format even though the worksheet column is formatted to Custom Date dd,mm,yyyy.
My code is as follows:-
Private Sub TextD_Exit(ByVal Cancel As MSForms.ReturnBoolean)
If Len(TextD.Value) = 0 Then Goto zExit
I want the user to select a date from a calendar and insert a new sheet if a new date has been selected otherwise display the calendar again; then get the user to select a 2nd date and use this is in a Vlookup formula:......
Show the user the calendar Record the value Format it and check it against existing sheetsIf it doesn't exist, insert a new sheet ( name = date)If it is already present ask the user to enter another date and present the calendar to them againShow the user for the calendar for the 2nd dateRecord the valueCheck it against existing sheet names (names = dates) - it needs to be a valid date = sheet nameIf it's valid, use it in the vlookup formulaIf it's invalid, warn the user and display the calendar againOnce 2 correct dates are entered, I have a routine that then runs fine ....
I'm getting very lost in when the routine 'SheetAlreadyExists' and 'InsertNewSheet' should run (ie before/after each other etc.)
I need some assistance taking dates entered in a userform and applying them to the sheet 'Completed_Report' cells Q1 and R1. The userform code that stores the input values is:
View 2 Replies View RelatedI'm working on a workbook to track staffing patterns. I have two userforms included in my workbook. The first userform (userForm2) initiates upon opening the workbook. It's intended to allow the user to enter a date range and an office location for the report. The second userform (userform1) initiates when a command button (Weekly Summary) is clicked. I've linked texts boxes in userForm2 to cells in a hidden worksheet; this is where I'm holding the dates and office location until userform1 is initiated. I also have labels in userform1 linked to the same cells in the hidden worksheet so that when userform1 is initiated the office and date range appear at the top of userform1.
Here's the problem, when I click command button "Weekly Summary" the office location shows up perfectly however, the labels I have linked to cells in the hidden worksheet that contain dates do not update (i.e. they show the dates that were previously in those specific cells. I have to close userform1 and re-open it to get the dates to update.
I need the user to be able to choose a date range and office location when they enter the workbook. Then, I need userform1 to show the date range and office location (without having to open it, close it and re-open it) that the user chose on opening the workbook.
what will be the code if commandbutton1 is clicked, it will check if the text in the combobox is in the range A2:A10 in the worksheet, if not in the range it will display a message box that the text is not in the range :D
View 9 Replies View RelatedDid Microsoft do this for a reason. But it seems to me there is no built in formula to check weather a number is odd or even.
=isodd(A1) or =iseven(a1) would be nice.
curent if I have to do something like, which works but is a lot of effort.
=IF(A1/2=INT(A1/2),"Even","Odd")
On the attached example i am concatenating surname with the first letter of the forename. However, what i want to add into the formula is if the answer is a duplicate of another answer in a range that these duplicates are changed to surname and full forename.
Is this possible with a formula or would it need a bit of vba programming?
I have lots of rows of text data on sheet 1(Q2:AB139708), on sheet 2 I have a list of text (A2:A44). In sheet 1 I would like to display "1" in cell ap2 if any of the row from (Q2:AB2) contains text from the list on sheet 2(A2:A44), then I would copy this down to 139708.
View 9 Replies View RelatedI've got all the grades sorted out for the Principal, she is now looking for me to tally up all the students who got straight 'A' grades. I know there is going to be anotehr combination here but I'll start with the basics of straight 'A's
The screen below shows how the data is presented although I've slimmed down the headings to fit better.
How do I insert a formula to look at each row to see where based on the subjects taken, there are straight 'A's
************************************************************************>Microsoft Excel - Y13 & 14 Combined Worksheet.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutZ6=
ABCDEFGHIJKLMNOPQRSTUVWXYZ1ArtArt*2BiologyBSChemistryD&TDramaEconomicsE.*LitFrenchGeographyHistoryH.*EconICTICT2IrishLatinMathematicsMaths*PureMusicPhysicsPoliticsPsychologyR.ESociologySpanish2********A****A**********A*3********AA*A*******A******4******A*C*****D****B******5***********B**********BAA*6*******C***D************BBSheet1*
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I only want then to be able to make entries between 07:45 and 08:45.
If TimeValue(Now()) > "0:745:00" And TimeValue(Now()) < "08:45:00" Then
code if OK
Else
code if not OK
MsgBox "TIME HAS EXPIRED .....SORRY."
End If
All it does is step the cursor down 1 cell from where it starts on the worksheet, rather than sorting through the defined range and then selecting the cell I want. I'm not sure why as I've used almost exactly the same code successfully on a different worksheet in the same workbook:
Dim mycheckrng as Range
myupdatedate = "04/06/2008"
Set mycheckrng = Range("D5:AR5")
For Each c In mycheckrng
If c.Value = myupdatedate Then
c.Select
End If
Next c
mycsdcdateref = ActiveCell
ActiveCell.Offset(1, 0).Select
Is there a way to check a value, that is a multiple of another value.
E.G.
say the user specifies a height of 225 and then specify laminations of 45
is there a way to check the value of 225 to ensure 45 divids into it perfectly??
and if it doesnt then gives an error message of some kind.
So if someone specifies height of 200 and lamination of 45 an error would show because 45 cant be divided into 200 perfectly.
I am just having trouble getting vba to recognize cell values. All I want it to do is if cell g2 = 5, then end sub, Else, continue. But I am so clueless that I cant even get it to recognize that what is in cell g2 is the number 5. I would think that I could just put,
If range(g & 2) = 5 Then
End Sub
Else
Resume
End If
I regularly check formula's in quotations to ensure they are working on the correct cells by cycling through each cell and pressing F2. Pressing F2 on a cell with a formula (in office 2003) draws boxes around each cell that is being referenced in the cell. This is very handy, but for large worksheets is time consuming to "F2" each cell. . . . can the F2 behaviour of highlighting cells be automated ? See attached screenshot.
View 5 Replies View RelatedI have to enter date into cells. It is being written from the lists of paper, where for date is entered only year (e.g. 1987), but I have to enter it into excel with day and month (the program working with data only recognizes this form; eg 01.01.1987).
I was thinking of writing a conditional formatting, to remind if I will forget to write 01.01. before year.
I prepared formula like this (to check for the dots):
=IF(AND(MID(AD2;3;1)=".";MID(AD2;6;1)=".");1;0)
But it is not working, because the function recognizes general formatting of cell instead of date formatting (28491 instead of 01.01.1987).