All it does is step the cursor down 1 cell from where it starts on the worksheet, rather than sorting through the defined range and then selecting the cell I want. I'm not sure why as I've used almost exactly the same code successfully on a different worksheet in the same workbook:
Dim mycheckrng as Range
myupdatedate = "04/06/2008"
Set mycheckrng = Range("D5:AR5")
For Each c In mycheckrng
If c.Value = myupdatedate Then
c.Select
End If
Next c
mycsdcdateref = ActiveCell
ActiveCell.Offset(1, 0).Select
I have a custom email creation template I am merging with another version. The problem I am having is wrapping my head around not only selecting a range that is offset from ActiveCell (column 6-9) but seeing if there is an "x" in that range which is normally blank. My previous attempts identify the "x" but adds the text every time it is found. (Each column is a flag for an email bullet and they can have all four bullets in the email where I only want the text included ONCE if they have ANY bullets included). I use the range because I do not want the text included if none of the bullets are used.
Teh StandHTML then gets used in the body of the email like other HTML items I use
The email is generated using the ActiveCell.Offset to insert special text, emails and routing and has weathered alot of changes over time.
Dim Myrange As Range Myrange = Range(ActiveCell.Offset(0, 6), ActiveCell.Offset(0, 9)).Select If Myrange = "x" Then StandHTML = StandHTML & "Important Text" End If
I need to have a single cell tell me (either by returning a certain word or colour) if any cell within a range of cells (a)(all within the same column) contain the same text as another cell thats located somewhere within a different range of cells (b)(again within thesame column).
I am trying to check and see if column "A" has a certain number if it does not then keep going and if it does then find wich row in column "A" has that number then in the same row increase column "B" value by 1.
Dim rngPartNumber As Range Dim Rws As Long Dim R As Long Set rngPartNumber = ActiveSheet.Range(Cells(2, 1), Cells(Rows.Count, 1).End(xlUp)) Rws = rngPartNumber.Rows.Count + 1 For R = Rws To 2 Step -1 If Application.WorksheetFunction.CountA(Rows(R)) = compName Then Quantity = Quantity + 1 Next
In our program it is essential that only data is entered for the current week.
I need code that if a date is entered into "cell C1",that it will evaluate this value and compare and assure that it is between the dates in Range D1:E1 (upper and lower values)
If it is between these two dates, nothing happens and you can proceed to enter data.
If it is not message -Invalid date entered. Proceed? If "Yes" nothing happens and you can proceed to enter data! If "No", then the value in cell C1 is set to nothing and allows you to enter the correct date.
I need to be allowed to enter an incorrect date at times,to review and check previous entries, 99% of the time it must be between the start and stop date.
I have an Excel sheet set up with 6 columns: Col A contains a user-entered date. Cols B-E each contain a drop-down that the user can set to 1 of 4 options. Col F (I want) to show a date based on Col A & the results of the drop-downs.
The drop-downs contain (in order of importance): "Immediate","Urgent","Routine" and "None". If any of them are set to "Immediate", the date in Col F should be Col A date+2 days, if any set to "Urgent" it should be Col A+14 days, any set to "Routine" it should be Col A+28 days and for None the field can remain empty. I can enter a formula in F2 that checks for B2's drop-down as follows:
I have a list of dates in a column, and am wanting to compare them against today() in cell A1. If any of the dates are in the past, it returns a FALSE, if all of the dates are in the future, it returns a TRUE.
I am trying to build a user form to find out the customers who purchase more than $1,000 during a certain period. The userform has two inputs:
One is to select the data range of customer information. Assume all customer information are in the cell A2: H10, how shall I write the error checking code if the user selects the range which is out of (A2:H10)? message box would be " You selection include invalid data, please check"..
The other input is called " Get data past this data", and I can enter a date in the following cell ( txtDate). Regarding the error checking, I am thinking to use IsDate() function to make sure it is a valid date. Will be there be any other error checking you will recommend?
I have a standard table with quite a few rows. Columns I have are :
Text | Lower number | Higher number
What I would like to do is, in another worksheet, enter a number and I'd like to go through the table and if the entered number is in the range of the Lower and Higher number columns, have the Text displayed.
Using Index Match I can do this if the number matches Lower or Higher number but not if it's between them.
Basically I'm doing a excel spreadsheet where i have a range of cells where we can input some figures or amount. If the cells they indicated exceed a certain amt example: 800, i would want it to show an error msg. I know it maybe sound simple, but have been using the if and countif formula which keep on showing error to me.
Is there a way of checking for duplicates in a range of cells using one cell only for the code? Return does not have to include what value is a duplicate - only true or false. This opposed to using multiple cell and COUNTIF or a pivot table.
see attached example. I am trying to write an error detection routine that iterates through worksheets that have numeric values for names (ignore text names or alphanumeric). Macro checks range on each numeric worksheet E3:E33 and is supposed to report back on the SummarySheet if any value other than 1 or 0 is found in range E3:E33 on any numeric-name worksheet. Code as follows:
[Code] ....
Problem is that it just reports EVERY worksheet as having an error when clearly most don't (none do I think in the attached example).
Try changing some of ranges E3:E33 to values other than 1 or 0, it still reports all sheets. Why the macro does not evaluate the range E3:E33 properly and just reports every worksheet as having an error?
what will be the code if commandbutton1 is clicked, it will check if the text in the combobox is in the range A2:A10 in the worksheet, if not in the range it will display a message box that the text is not in the range :D
On the attached example i am concatenating surname with the first letter of the forename. However, what i want to add into the formula is if the answer is a duplicate of another answer in a range that these duplicates are changed to surname and full forename.
Is this possible with a formula or would it need a bit of vba programming?
Is there a code in vba, that will return today's date (or the date of the week before, [today-7]) I need a vba code that will check a current cell - let say cell "A1", that contains a date( for exmpel: 12/7/09), and compare this date to the date last week, if the cell (A1)contains a date that is older then last week , then fill in A2 with "False", if the date in A1 is between the date of today and a week ago then fill A2 with "True". (For the exmple that I gave of course in A2 the value will be "False")
I have lots of rows of text data on sheet 1(Q2:AB139708), on sheet 2 I have a list of text (A2:A44). In sheet 1 I would like to display "1" in cell ap2 if any of the row from (Q2:AB2) contains text from the list on sheet 2(A2:A44), then I would copy this down to 139708.
I've got all the grades sorted out for the Principal, she is now looking for me to tally up all the students who got straight 'A' grades. I know there is going to be anotehr combination here but I'll start with the basics of straight 'A's
The screen below shows how the data is presented although I've slimmed down the headings to fit better.
How do I insert a formula to look at each row to see where based on the subjects taken, there are straight 'A's
************************************************************************>Microsoft Excel - Y13 & 14 Combined Worksheet.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutZ6= ABCDEFGHIJKLMNOPQRSTUVWXYZ1ArtArt*2BiologyBSChemistryD&TDramaEconomicsE.*LitFrenchGeographyHistoryH.*EconICTICT2IrishLatinMathematicsMaths*PureMusicPhysicsPoliticsPsychologyR.ESociologySpanish2********A****A**********A*3********AA*A*******A******4******A*C*****D****B******5***********B**********BAA*6*******C***D************BBSheet1* [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I am just having trouble getting vba to recognize cell values. All I want it to do is if cell g2 = 5, then end sub, Else, continue. But I am so clueless that I cant even get it to recognize that what is in cell g2 is the number 5. I would think that I could just put,
If range(g & 2) = 5 Then End Sub Else Resume End If
I regularly check formula's in quotations to ensure they are working on the correct cells by cycling through each cell and pressing F2. Pressing F2 on a cell with a formula (in office 2003) draws boxes around each cell that is being referenced in the cell. This is very handy, but for large worksheets is time consuming to "F2" each cell. . . . can the F2 behaviour of highlighting cells be automated ? See attached screenshot.
I have to enter date into cells. It is being written from the lists of paper, where for date is entered only year (e.g. 1987), but I have to enter it into excel with day and month (the program working with data only recognizes this form; eg 01.01.1987).
I was thinking of writing a conditional formatting, to remind if I will forget to write 01.01. before year.
I prepared formula like this (to check for the dots): =IF(AND(MID(AD2;3;1)=".";MID(AD2;6;1)=".");1;0)
But it is not working, because the function recognizes general formatting of cell instead of date formatting (28491 instead of 01.01.1987).
I am trying to compare 2 conditions to see if one or other is correct and if so out put ok if correct and wrong if incorrect i tried this formula but does not work.
I have a spreadsheet with 2 columns of values. I need to check that the two columns have the same values, however the last digit of the values will differ every time, in the first column the value will always be a 3 and in the 2nd column it will always be a 0. Unfortunately the amount of digits before the last, differs from 6 to 9 so its not as easy to do a trim. Example
I have a sheeet conditionally formatted so that if data is missing from certain cells, that cell turns 'red'. Is it possible to have cell A1 (for instance) report if there is a red cell anywhere on the sheet?
I've got two text boxes where users input the dates in specified format (dd/mm/yyyy). current validation checks whether one date is not earlier than the other one and it looks like this:
[Code] .....
However if they are equal which suits me I am still getting an error. don't need a calendar btw
