I am just having trouble getting vba to recognize cell values. All I want it to do is if cell g2 = 5, then end sub, Else, continue. But I am so clueless that I cant even get it to recognize that what is in cell g2 is the number 5. I would think that I could just put,
If range(g & 2) = 5 Then
End Sub
Else
Resume
End If
I have a spreadsheet with 2 columns of values. I need to check that the two columns have the same values, however the last digit of the values will differ every time, in the first column the value will always be a 3 and in the 2nd column it will always be a 0. Unfortunately the amount of digits before the last, differs from 6 to 9 so its not as easy to do a trim. Example
Column 1 Column 2
11111113 11111110
222222223 222222220
4444444443 4444444440
I need to check that the first digits (no mater how many) are all the same except the last digit.
I am using the autofilter in my code.
Selection.AutoFilter field:=11, Criteria1:="reena"
Count = Sheets("ABC").AutoFilter.Range.Columns(1).SpecialCells(xlCellTypeVisible).Count - 1
In the field for of the worksheet 'ABC' there are some values. I want to sort the value 'reena' and save the count in the variable Count. But sometimes the value 'reena' is not available in the field 11. Then it gives error for the above Count variable.
How to check this? How to check that the autofilter value is 'null'.
I'm trying to create a formula that would check if there are similar values in a row. How should I do this? There are 20 values in a row, and they should all be different (true). If similar values are found, it should give a warning or highlight the two or more cells.
The project I'm working on is for checking the measured Valve clearances on 4 cylinder motorbikes
They have 16 valves in all and I had made a spread sheet which has cells to enter the Min and Max Valve clearances for 8 exhaust and 8 Inlet valves they have different tolerances.
I have been able to do this part so I am at the point where once the valve gap min and max are entered for the exhaust and inlet valves on Cylinder 1 this changes all the min max gaps for all the other inlet and exhaust valves.
And once I have measured the gaps and entered the actual valve gap the sheet then tells me if the measured value is in or outside the valve clearance tolerance. And this is all working very well!
To save money on buying new shims which is what is used to adjust the valve clearance I swap as many shims that are out of spec on the inlet side to the Exhaust side and vice verse that will bring the valve back into spec.
Once a shim is found out of spec it must be removed, it's measured and that measurement is entered into the sheet and the sheet then tells me what size shim to replace it with to bring the valve gap back to as close to the centre of the tolerance as possible.
What I won't the sheet to do that I can't work out how is once all the out of spec shims have been entered I want it to check and tell me which shims can be moved to which valves to bring them back in spec! All valves are numbered from 1 to 16 and cylinder number exhaust and inlet valves.
Basically what I have is a spreadsheet that checks peoples average case count at the warehouse I work at, problem is that the source of information I use doesn't factor out breaks so I need to do this with if statements. see below.
View 2 Replies View RelatedI have a 'master' spreadsheet containing over a thousand filenames. I have been given another spreadsheet with just a couple of hundred filenames on it and have been asked to find out if the filenames on this 'small' spreadsheet appear on the larger/master one.
Is there any way (by formula or by macro code) that I can do this easily? What would be great is some way of Excel colouring in the filenames on the 'small' spreadsheet that also exist on the master one.
I'm trying to validate the data entered into a series of cells each cell can contain a different set of data but the value N/A is also permitted. For example:
Cell A1 could contain a date from 2013-01-01 thru 2013-12-01 but the value N/A is also valid
Cell A2 could contain a decimal from 0.01 thru 302502.23 but the value N/A is also valid
Cell A3 could contain an integer from 3 thru to 9000 but the value N/A is also valid
When the acceptable values are entered then I want to be able to carry on otherwise I want to pop up with an error.
I have a Multi Select ListBox with values from a range of cells.
I wish to automate the selection of one or more existing value(s) via VBA code so when User views the List, The check mark is visible. This will alert them to Active values.
i.e ListBox:
North
South
East
West.
If the active region is West, The check box beside West is Active, i.e contains an "X"
If seen a couple of examples but for whatever reason it doesn't work on my sheet. (Excel 2010 32 bit) I don't understand how to highlight the entire column to see this particular value is not in this list. I have two lists, I want to see what data am I missing In list 2 that I have in list one. Basically all I am trying to do is see what values are not in the second list but are in the first list so I can later add them to the second list. (Also the 2nd list is longer than the first if that makes a difference.)
View 3 Replies View RelatedError Check Marco.xlsm
see attached example. I am trying to write an error detection routine that iterates through worksheets that have numeric values for names (ignore text names or alphanumeric). Macro checks range on each numeric worksheet E3:E33 and is supposed to report back on the SummarySheet if any value other than 1 or 0 is found in range E3:E33 on any numeric-name worksheet. Code as follows:
[Code] ....
Problem is that it just reports EVERY worksheet as having an error when clearly most don't (none do I think in the attached example).
Try changing some of ranges E3:E33 to values other than 1 or 0, it still reports all sheets. Why the macro does not evaluate the range E3:E33 properly and just reports every worksheet as having an error?
I have a tracking sheet that is used to show where a specific project is within the lifecycle and would like to automatically set a summary value depending on the last data entry within a range of cells in a row and also set it to RAG status depending on the value.....
View 2 Replies View Relatedwhat will be the code if commandbutton1 is clicked, it will check if the text in the combobox is in the range A2:A10 in the worksheet, if not in the range it will display a message box that the text is not in the range :D
View 9 Replies View RelatedDid Microsoft do this for a reason. But it seems to me there is no built in formula to check weather a number is odd or even.
=isodd(A1) or =iseven(a1) would be nice.
curent if I have to do something like, which works but is a lot of effort.
=IF(A1/2=INT(A1/2),"Even","Odd")
On the attached example i am concatenating surname with the first letter of the forename. However, what i want to add into the formula is if the answer is a duplicate of another answer in a range that these duplicates are changed to surname and full forename.
Is this possible with a formula or would it need a bit of vba programming?
Is there a code in vba, that will return today's date (or the date of the week before, [today-7]) I need a vba code that will check a current cell - let say cell "A1", that contains a date( for exmpel: 12/7/09), and compare this date to the date last week, if the cell (A1)contains a date that is older then last week , then fill in A2 with "False", if the date in A1 is between the date of today and a week ago then fill A2 with "True". (For the exmple that I gave of course in A2 the value will be "False")
I have lots of rows of text data on sheet 1(Q2:AB139708), on sheet 2 I have a list of text (A2:A44). In sheet 1 I would like to display "1" in cell ap2 if any of the row from (Q2:AB2) contains text from the list on sheet 2(A2:A44), then I would copy this down to 139708.
View 9 Replies View RelatedI've got all the grades sorted out for the Principal, she is now looking for me to tally up all the students who got straight 'A' grades. I know there is going to be anotehr combination here but I'll start with the basics of straight 'A's
The screen below shows how the data is presented although I've slimmed down the headings to fit better.
How do I insert a formula to look at each row to see where based on the subjects taken, there are straight 'A's
************************************************************************>Microsoft Excel - Y13 & 14 Combined Worksheet.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutZ6=
ABCDEFGHIJKLMNOPQRSTUVWXYZ1ArtArt*2BiologyBSChemistryD&TDramaEconomicsE.*LitFrenchGeographyHistoryH.*EconICTICT2IrishLatinMathematicsMaths*PureMusicPhysicsPoliticsPsychologyR.ESociologySpanish2********A****A**********A*3********AA*A*******A******4******A*C*****D****B******5***********B**********BAA*6*******C***D************BBSheet1*
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I only want then to be able to make entries between 07:45 and 08:45.
If TimeValue(Now()) > "0:745:00" And TimeValue(Now()) < "08:45:00" Then
code if OK
Else
code if not OK
MsgBox "TIME HAS EXPIRED .....SORRY."
End If
All it does is step the cursor down 1 cell from where it starts on the worksheet, rather than sorting through the defined range and then selecting the cell I want. I'm not sure why as I've used almost exactly the same code successfully on a different worksheet in the same workbook:
Dim mycheckrng as Range
myupdatedate = "04/06/2008"
Set mycheckrng = Range("D5:AR5")
For Each c In mycheckrng
If c.Value = myupdatedate Then
c.Select
End If
Next c
mycsdcdateref = ActiveCell
ActiveCell.Offset(1, 0).Select
Is there a way to check a value, that is a multiple of another value.
E.G.
say the user specifies a height of 225 and then specify laminations of 45
is there a way to check the value of 225 to ensure 45 divids into it perfectly??
and if it doesnt then gives an error message of some kind.
So if someone specifies height of 200 and lamination of 45 an error would show because 45 cant be divided into 200 perfectly.
I regularly check formula's in quotations to ensure they are working on the correct cells by cycling through each cell and pressing F2. Pressing F2 on a cell with a formula (in office 2003) draws boxes around each cell that is being referenced in the cell. This is very handy, but for large worksheets is time consuming to "F2" each cell. . . . can the F2 behaviour of highlighting cells be automated ? See attached screenshot.
View 5 Replies View RelatedI have to enter date into cells. It is being written from the lists of paper, where for date is entered only year (e.g. 1987), but I have to enter it into excel with day and month (the program working with data only recognizes this form; eg 01.01.1987).
I was thinking of writing a conditional formatting, to remind if I will forget to write 01.01. before year.
I prepared formula like this (to check for the dots):
=IF(AND(MID(AD2;3;1)=".";MID(AD2;6;1)=".");1;0)
But it is not working, because the function recognizes general formatting of cell instead of date formatting (28491 instead of 01.01.1987).
I am trying to compare 2 conditions to see if one or other is correct and if so out put ok if correct and wrong if incorrect i tried this formula but does not work.
IF(OR(AND(j3="UP",t3=1),(AND(j3="DOWN",t3=-1),"ok","wrong")
I want to have C9 populated with a budget type from H1, I1 or J1. How do I create the formula that checks which budget type the value in F9 is?
I am using excel very infrequently.
Screen Shot 2014-05-18 at 12.52.26.jpg
I have a sheeet conditionally formatted so that if data is missing from certain cells, that cell turns 'red'. Is it possible to have cell A1 (for instance) report if there is a red cell anywhere on the sheet?
View 4 Replies View RelatedI've got two text boxes where users input the dates in specified format (dd/mm/yyyy). current validation checks whether one date is not earlier than the other one and it looks like this:
[Code] .....
However if they are equal which suits me I am still getting an error. don't need a calendar btw
Have created a small form with 5 checkboxes and a button on a worksheet. Want to check all checkboxes on the worksheet when the button is pressed.
However, I am getting "Run-time error '438': Object doesn't support this property or method". Enclosing the code for your reference.
[Code] .....
I am trying to check and see if column "A" has a certain number if it does not then keep going and if it does then find wich row in column "A" has that number then in the same row increase column "B" value by 1.
Dim rngPartNumber As Range
Dim Rws As Long
Dim R As Long
Set rngPartNumber = ActiveSheet.Range(Cells(2, 1), Cells(Rows.Count, 1).End(xlUp))
Rws = rngPartNumber.Rows.Count + 1
For R = Rws To 2 Step -1
If Application.WorksheetFunction.CountA(Rows(R)) = compName Then Quantity = Quantity + 1
Next
I want add some code into a macro of mine which checks to see if J8 >20 and DA8 = "TRUE" then a msgbox appears saying "no auto margins".
View 2 Replies View Related