Is there a way to check a value, that is a multiple of another value.
E.G.
say the user specifies a height of 225 and then specify laminations of 45
is there a way to check the value of 225 to ensure 45 divids into it perfectly??
and if it doesnt then gives an error message of some kind.
So if someone specifies height of 200 and lamination of 45 an error would show because 45 cant be divided into 200 perfectly.
I am getting a NEXT without FOR error message when i try to run this code. This is the portion of sub im having trouble with.. been trying to work it out but to no avail. I thought that i might have to do Next Ccell, though I got the same error.
View 2 Replies View RelatedThe project I'm working on is for checking the measured Valve clearances on 4 cylinder motorbikes
They have 16 valves in all and I had made a spread sheet which has cells to enter the Min and Max Valve clearances for 8 exhaust and 8 Inlet valves they have different tolerances.
I have been able to do this part so I am at the point where once the valve gap min and max are entered for the exhaust and inlet valves on Cylinder 1 this changes all the min max gaps for all the other inlet and exhaust valves.
And once I have measured the gaps and entered the actual valve gap the sheet then tells me if the measured value is in or outside the valve clearance tolerance. And this is all working very well!
To save money on buying new shims which is what is used to adjust the valve clearance I swap as many shims that are out of spec on the inlet side to the Exhaust side and vice verse that will bring the valve back into spec.
Once a shim is found out of spec it must be removed, it's measured and that measurement is entered into the sheet and the sheet then tells me what size shim to replace it with to bring the valve gap back to as close to the centre of the tolerance as possible.
What I won't the sheet to do that I can't work out how is once all the out of spec shims have been entered I want it to check and tell me which shims can be moved to which valves to bring them back in spec! All valves are numbered from 1 to 16 and cylinder number exhaust and inlet valves.
This is a good deal harder than my last issue. I have a few pieces of data:
A62:A80 - Array of Integers named X (2 through 20, to be exact)
D62:D80 - Array of Strings named Y (on a Drop Down)
AD45, AG45, AJ45 - Formula Holders
Now the tough part of explaining what I want... assume the string in question is "Pie":
If Y contains "Pie" once, I want AD45 to take the value of the corresponding X.
If Y contains "Pie" twice, I want AD45 to take the value of the first X, and AG45 to take the value of the second.
If Y contains "Pie" three times, I want AD45 to take the value of the first X, and AG45 to take the value of the second, and AJ45 to take the value of the third.
So, in the end, the formula holders will either have a number between 2 and 20, or be blank. Note that it is possible for users to put more than 3 occurrences in Y even if it's user error.
I'm not really asking for the full formulas, but I simply don't know where to start on this, on what functions would be useful in pulling out the values I want.
One idea I had is that:
AD45 searches the array for "Pie" and takes the first value of "X" that matches the find. Blank if it doesn't.
AG45 checks if AD45 is not blank, and searches the array for "Pie" starting at the next index.
AJ45 checks if AG45 is not blank, and searches the array for "Pie" starting at the next index.
I have 52 weekly folders which are contained in the following directory
G:RawProduct ManagementJen DelaneyVendor ReportsLexmarkWeekly Stock And Sales2007
Wk4
Wk5
Wk6
Etc. etc.
Each (EG) Wk4 folder contains 6 files (all .xls format)
What I need to do (quickly) is create a macro which will cycle through each file & tell me which file (filename) contains the following part numbers (if at all)
0012A7610
0064080HW
0012A0150
0012A5140
0012A7610
0064080HW
So basically its checking to see if any of the above part numbers are contained in the file?
i need to check a date within a multiple range of dates using certain key.
i've tried vlookup, but failed to get correct answer.
here is Table1
product (cell=A1)
date (cell=B1)
plan(cell=C1)
A
20080801
A
20090801
A
20090901
A
20090831
A
20090101
A
20091101.....................
I'm trying to validate the data entered into a series of cells each cell can contain a different set of data but the value N/A is also permitted. For example:
Cell A1 could contain a date from 2013-01-01 thru 2013-12-01 but the value N/A is also valid
Cell A2 could contain a decimal from 0.01 thru 302502.23 but the value N/A is also valid
Cell A3 could contain an integer from 3 thru to 9000 but the value N/A is also valid
When the acceptable values are entered then I want to be able to carry on otherwise I want to pop up with an error.
Create array set for checking multiple workbook?
[Code] .....
- I have some buttons set-up to insert pre-set diagrams from sheet “FISH PARTS” onto sheet “THE JUMPER FISHBONE”
- However, before inserting a new diagram onto sheet “THE JUMPER FISHBONE” I need to make sure the default diagram components are all gone.
- There are seven components all with structure Like “BONE_*”
- If one or more of these components are present I want to display a message to confirm the user wishes to delete the default diagram and insert new chart (or abort is they do not wish to delete the default)
- some explaination of structure below
- spreadsheet also attached
what i want to do is 1 have a workbook with 3 worksheets. Sheet1 contains the columns:
Reference No. Line Item No. Amount Date
1 3 500 12/01
2 4 900 01/01
Sheet2:
Reference No. Line Item No. Quantity PersonInCharge
1 3 10 Kim
5 6 60 Noel
For sheet 3, what i want to happen is that when i run the VBA macro, it searches through both worksheets (Sheet1 and Sheet2), finding rows that have matching Reference No. AND Line Item No. and combine all of the columns (and values) for that particular row into another row in Sheet 3. So for the above data set, the resulting data in Sheet 3 would be:
Reference No. Line Item No. Amount Date Quanity PersonInCharge
1 3 500 12/01 10 Kim
As this is the only entry in both sheet1 and sheet2 where there is a matching reference and line item no.
what will be the code if commandbutton1 is clicked, it will check if the text in the combobox is in the range A2:A10 in the worksheet, if not in the range it will display a message box that the text is not in the range :D
View 9 Replies View RelatedDid Microsoft do this for a reason. But it seems to me there is no built in formula to check weather a number is odd or even.
=isodd(A1) or =iseven(a1) would be nice.
curent if I have to do something like, which works but is a lot of effort.
=IF(A1/2=INT(A1/2),"Even","Odd")
On the attached example i am concatenating surname with the first letter of the forename. However, what i want to add into the formula is if the answer is a duplicate of another answer in a range that these duplicates are changed to surname and full forename.
Is this possible with a formula or would it need a bit of vba programming?
Is there a code in vba, that will return today's date (or the date of the week before, [today-7]) I need a vba code that will check a current cell - let say cell "A1", that contains a date( for exmpel: 12/7/09), and compare this date to the date last week, if the cell (A1)contains a date that is older then last week , then fill in A2 with "False", if the date in A1 is between the date of today and a week ago then fill A2 with "True". (For the exmple that I gave of course in A2 the value will be "False")
I have lots of rows of text data on sheet 1(Q2:AB139708), on sheet 2 I have a list of text (A2:A44). In sheet 1 I would like to display "1" in cell ap2 if any of the row from (Q2:AB2) contains text from the list on sheet 2(A2:A44), then I would copy this down to 139708.
View 9 Replies View RelatedI've got all the grades sorted out for the Principal, she is now looking for me to tally up all the students who got straight 'A' grades. I know there is going to be anotehr combination here but I'll start with the basics of straight 'A's
The screen below shows how the data is presented although I've slimmed down the headings to fit better.
How do I insert a formula to look at each row to see where based on the subjects taken, there are straight 'A's
************************************************************************>Microsoft Excel - Y13 & 14 Combined Worksheet.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutZ6=
ABCDEFGHIJKLMNOPQRSTUVWXYZ1ArtArt*2BiologyBSChemistryD&TDramaEconomicsE.*LitFrenchGeographyHistoryH.*EconICTICT2IrishLatinMathematicsMaths*PureMusicPhysicsPoliticsPsychologyR.ESociologySpanish2********A****A**********A*3********AA*A*******A******4******A*C*****D****B******5***********B**********BAA*6*******C***D************BBSheet1*
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I only want then to be able to make entries between 07:45 and 08:45.
If TimeValue(Now()) > "0:745:00" And TimeValue(Now()) < "08:45:00" Then
code if OK
Else
code if not OK
MsgBox "TIME HAS EXPIRED .....SORRY."
End If
All it does is step the cursor down 1 cell from where it starts on the worksheet, rather than sorting through the defined range and then selecting the cell I want. I'm not sure why as I've used almost exactly the same code successfully on a different worksheet in the same workbook:
Dim mycheckrng as Range
myupdatedate = "04/06/2008"
Set mycheckrng = Range("D5:AR5")
For Each c In mycheckrng
If c.Value = myupdatedate Then
c.Select
End If
Next c
mycsdcdateref = ActiveCell
ActiveCell.Offset(1, 0).Select
I am just having trouble getting vba to recognize cell values. All I want it to do is if cell g2 = 5, then end sub, Else, continue. But I am so clueless that I cant even get it to recognize that what is in cell g2 is the number 5. I would think that I could just put,
If range(g & 2) = 5 Then
End Sub
Else
Resume
End If
I regularly check formula's in quotations to ensure they are working on the correct cells by cycling through each cell and pressing F2. Pressing F2 on a cell with a formula (in office 2003) draws boxes around each cell that is being referenced in the cell. This is very handy, but for large worksheets is time consuming to "F2" each cell. . . . can the F2 behaviour of highlighting cells be automated ? See attached screenshot.
View 5 Replies View RelatedI have to enter date into cells. It is being written from the lists of paper, where for date is entered only year (e.g. 1987), but I have to enter it into excel with day and month (the program working with data only recognizes this form; eg 01.01.1987).
I was thinking of writing a conditional formatting, to remind if I will forget to write 01.01. before year.
I prepared formula like this (to check for the dots):
=IF(AND(MID(AD2;3;1)=".";MID(AD2;6;1)=".");1;0)
But it is not working, because the function recognizes general formatting of cell instead of date formatting (28491 instead of 01.01.1987).
I am trying to compare 2 conditions to see if one or other is correct and if so out put ok if correct and wrong if incorrect i tried this formula but does not work.
IF(OR(AND(j3="UP",t3=1),(AND(j3="DOWN",t3=-1),"ok","wrong")
I want to have C9 populated with a budget type from H1, I1 or J1. How do I create the formula that checks which budget type the value in F9 is?
I am using excel very infrequently.
Screen Shot 2014-05-18 at 12.52.26.jpg
I have a spreadsheet with 2 columns of values. I need to check that the two columns have the same values, however the last digit of the values will differ every time, in the first column the value will always be a 3 and in the 2nd column it will always be a 0. Unfortunately the amount of digits before the last, differs from 6 to 9 so its not as easy to do a trim. Example
Column 1 Column 2
11111113 11111110
222222223 222222220
4444444443 4444444440
I need to check that the first digits (no mater how many) are all the same except the last digit.
I have a sheeet conditionally formatted so that if data is missing from certain cells, that cell turns 'red'. Is it possible to have cell A1 (for instance) report if there is a red cell anywhere on the sheet?
View 4 Replies View RelatedI've got two text boxes where users input the dates in specified format (dd/mm/yyyy). current validation checks whether one date is not earlier than the other one and it looks like this:
[Code] .....
However if they are equal which suits me I am still getting an error. don't need a calendar btw
Have created a small form with 5 checkboxes and a button on a worksheet. Want to check all checkboxes on the worksheet when the button is pressed.
However, I am getting "Run-time error '438': Object doesn't support this property or method". Enclosing the code for your reference.
[Code] .....
I am trying to check and see if column "A" has a certain number if it does not then keep going and if it does then find wich row in column "A" has that number then in the same row increase column "B" value by 1.
Dim rngPartNumber As Range
Dim Rws As Long
Dim R As Long
Set rngPartNumber = ActiveSheet.Range(Cells(2, 1), Cells(Rows.Count, 1).End(xlUp))
Rws = rngPartNumber.Rows.Count + 1
For R = Rws To 2 Step -1
If Application.WorksheetFunction.CountA(Rows(R)) = compName Then Quantity = Quantity + 1
Next
I want add some code into a macro of mine which checks to see if J8 >20 and DA8 = "TRUE" then a msgbox appears saying "no auto margins".
View 2 Replies View RelatedI have a file of users and security codes. each user should have at least one security code. How can I get rid of all the good combinations and only leave the bad ones?
Example:
user: joe blo
security code = 1
user: jim white
security code = 1
user: sam song
security code=5
user: jo jo
user: billy boy
security code=1
You can see Jo Jo does not have a security row. I need to the good ones to be removed so only the user with the missing security code is left: