if A7="in" delete contents of Q7
the contents in the a column are "in" or "out"
the contents of the Q column are all different so it will have to be cell based
i will have to apply this to the whole sheet
I have renamed some cells to custom names eg. renamed cell A1 to FLIGHT and B1 to FLIGHT2.
When I apply a filter to the columns and autofilter, the renamed cell now refers to a different cell! ie. FLIGHT no longer has the same text value in it
This also only happens when I autofilter by alphabetically or highest/lowest values
Example: I renamed cell A1 to Apple, A2 to Banana, A3 to Chair. Down in cell a50 I was using simple formulas a1+a2*a3. then copying the formula into column b50, c50,... Now when I use the formula SUM(Apple+Banana*Chair) and try to copy it into cell b50, It doesnt change the formula to SUM(B1+B2*B3).
View 5 Replies View RelatedI need to clear the contents of a columns G and H starting 11th row based on what is there in F column. The macro should check for last non-empty cell in column F starting F11 (assume it finds F30 to be last non-empty cell), then it should clear the contents of G11 to G30, H11 to H30.
View 1 Replies View RelatedI have a workbook with two sheets of data. I want to hide column B of Sheet2 and clear contents of range B2:B50 if the value in A1 of Sheet1 is "a".
View 2 Replies View Relatedhow do i create a formula or macro that will: Clear the contents of Cell C1 If Both Cell A1 And B1 Are Filled. I will need to check all the cells in column A,B and C.
View 2 Replies View RelatedI have two rows of numbers, say D1 to F1 and D2 to F2. Row D2 to F2 will always have lower values.
The range below it is D3 to F100. I want the range to clear the contents of the cells in the range where:
a) the cell is > the x1 cell above it
OR b) the cell is < the x2 cell above it
If it is = or between the two cells, the value stays.
Example:
If D1 thru F1 is 4, 5, 7 and D2 thru F2 is 2, 4, 3, then:
D3 is 5, it is cleared
E3 is 4, it stays
F3 is 5, it stays
D4 is 2, it stays
E4 is 1, it is cleared
F4 is 9, it is cleared
Etc
Basically, the cell in the range looks up its own column, compares itself to x1 and x2 in that column. If it's greater than or less than, then it clears the contents, if not, the value in the cell stays.
A project I am working on calls for me to implement a macro that will clear the contents of a cell (but not affect the validation list it contains) based on the selection of another cell or cells. So on the simplified attached example, I need to achieve the following;
On the fist row of options, if cell "C3" is selected, then the contents in cell "D3" are cleared. If cell "B3" is selected then the contents in cells "C3" AND "D3" are both cleared. Similar is needed for the second row of options;
If Cell "C6" is selected, then the contents in cell "D6" are cleared. If cell "B6" is selected then the contents in cells "C6" AND "D6" are both cleared. Finally, if cell "A3" is selected, then ALL of the above cells' (B3-D3 & B6-D6) contents must be cleared.
I am trying to find something that would allow me to have a spreadsheet clear the contents of a certain cell based on the selection made from a data validation list which resides on the same row. This can best be described with an example.
The user selects anything but " " or "none" from the validation list, which for this example resides in C5, would trigger code to clear the contents, if any, in AA5. If " " or "none" is chosen the value remains.
This capability should be available for each row through 100.
We have a sheet which we use to cost products. To ensure that people don't enter prices incorrectly, I have created a lookup to another sheet which shows current prices. Therefore, I have a macro that if I click a button, it looks up the prices from the relevant document. The way I have written the macro is to clear the sheet of what is already there and then to open up, vlookup and then close the lookup sheet.
The problem I had with this was that if i renamed the sheet, the macro wouldn't work - I sussed that one out by changing filename in the macro to 'ThisWorkbook'.
The problem I now have, is that the boss would like the sheet to magically do the following;
Lookup the prices on two external sheets. IF the main sheet doesn't have the corresponding reference THEN automatically go and Lookup on the other sheet for it.
He doesn't want any references to filenames so that, as long as the sheets are stored in the same place, they can be copied/renamed and moved anywhere.
I've created a custom toolbar and populated it with a custom button. I have created a macro and it resides in ThisWorkbook. The macro is assigned to the custom button and the toolbar attached to the workbook. So far, so good. If I copy the workbook and rename it, when I click the button to run the macro it launches the original workbook and runs the macro. The macro effects changes on the renamed workbook copy. The macro name found in the assign macro dialogue starts with the original workbook name. The same effect if the macro resides in a module or sheet. Any known way to have the macro name change along with the renaming of the workbook such taht it refers to the currently opened workbook macros? Regards.
View 5 Replies View RelatedI'm trying to figure out if there is a formula I could use that will calculate the average of a group cells in one column based on the condition of another column. It's hard to explain, so I will show an example. All the data is on a one worksheet and I'm trying to show totals and averages on another worksheet. Location, Days
17, 4
17, 3
17, 5
26, 4
26, 8
26, 10
26, 7
On a different worksheet I would want to know what the average days are for each location. So is there a formula that I could use that will look at column A for a specified location number and then average all the days in column B for that location? I'm using Excel 2003 and have tried using the Average(if) but with no success.
I have two columns. Column A had numbers and column B has names. I need a count from column A for each name in column B.
View 1 Replies View RelatedI think I am working all around this in Excel 2003 and feel like I am in the neighborhood, but can't seem to quite get there. On sheet1 I have 2 columns of 100s of rows. All of the cells in column A will be filled in with a date as time goes by (1-May-09 for example). Several of them may be 1-May-09 as a matter of fact. In column B, some of the cells will have a number in them and some of them will be empty. On sheet2, I want to construct a formula that returns a count of cells in column B that have a number in them based on a specific date in column A. For example:
AB
1-May
1-May777
1-May
1-May
1-May
2-May999
3-May
2-May
1-May
2-May111
1-May
If I could get the formula right, it would return an answer of 1 for 1-May in the example, because only 1 of the 1-May entries in column A has a number in the adjacent cell in column B. A formula for 2-May would return an answer of 2 since only 2 of the 2-May entries in column A have numbers in the adjacent cell in column B, and so on for the month. If I understand things right, there are too many arguments for COUNTIF. It seems that SUMPRODUCT should work, but I can't make it so.
I would like to write a macro to add cells in columns C,D,E,F,G & H based on the text (employee) entered in column B. For example I need it to add all the cells for "John S" found within column "C" and then total it at the bottom with a code JSSS (John S straight shop time) or JSOS (John S overtime shop) as per my example. The attatchment is a spreadsheet I use to total billable hours for our employees.
View 3 Replies View RelatedI have a problem which requires a vba routine that is currently outside of my level of expertise...
Here is an example of the data:
TESCO GARAGE 3729
59
REF 177 1092098207 BCC
59
CO-OP GROUP LTD
60
[Code]......
I have a statement from an account (which happens to be the government) in which they list every invoice they are paying and each item on that invoice. But they don't have an invoice total. I'd like a way to add up the item totals for each invoice and put the total in column D. Each invoice could have 1 to 10 different items on it.
A(invoice#) B(Item) C(total) D(invoice total)
111 widget 1 $5
111 widget 2 $10
111 widget 3 $8 XXXXX
222 widget 1 $5
222 widget 5 $15 XXXXX
333 widget 2 $10 XXXXX
444 widget 5 $15 XXXXX
I had thought an IF formula would be the way to go.
I have an personnel file with employee info, and I want to create a macro that will look in the "Master" worksheet at the Department column ("I") for anyone in Benefits, and then copy their name from the Name column ("D") into the "Benefits" worksheet. The names should begin pasting in cell "D3" but will recognize if a cell already has a name in it and then paste in the cell below that.
Here is what I have:
Option Explicit
Public Sub RatingbyDept()
Dim Dept As Range
With Sheets("Master")
For Each Dept In .Range("I2:I1000")
With Dept
I keep getting error 92 - "For loop not initialized".
I am trying to sum up cells from a column based on conditions in another column (see attached file). I know this could be done using a formula but for various reasons I want to use code. I am not sure if what I am doing is the right approach.
View 1 Replies View RelatedI currently have a spreadsheet that has 4 columns. I want to review the information in column A and if it matches, I want to combine the cells in column D into one cell for the matches in column A. Here is an example of the information I have:
123456
ABC Company
901
0001
123456
ABC Company
901
0099
[Code] ....
So basically I want to review column A and any # in that column matches, I want to combine the cells from column D into one cell. So I would want the first sequence to catch that A1, A2, and A3 match... so then it would combine D1, D2, and D3 into one cell that would read "0001/0099/HRA1". Is this possible?
I would like to run a macro that would check if the date in the first cell of row is in the past.
If yes, then it would clear contents of cell in B,C,F,I,L of the same row (PLAN + SHIFTS). Or even better it would set them to 0 (zero).
Then it would hide the entire row. Is this even possible?
Please see the example: Excel.JPG
I am looking for a code that will clear all of my unlocked cell in sheet 1. That is not a problem but since many of the cells are merged I know it keeps throwing me an error saying cannot change contents of merged cells or something like that. Does anyone know how to get around this without unmerging the cells. I saw a code to unmerge all of the cells on a sheet but I really don't want to do this as I already have worked around most of my problems with the merged cells.
View 14 Replies View RelatedMacro to clear cells with numbers but no cells with formulas with in this macro:
Dim i As Long
i = Range("E3")
If i > 0 Then
' Copy range
Range(Cells(6, 10 + i), Cells(500, 17)).Copy
Range(Cells(6, 10), Cells(500, 17)).Select
' Paste special
ActiveSheet.PasteSpecial Format:=2, Link:=1, _
DisplayAsIcon:=False, IconFileName:=False
' Clear i columns on the right
Range(Cells(6, 18 - i), Cells(500, 17)).ClearContents
End If
End Sub
The range is where the cells with numbers need to be cleared but not the ones with formulas.
I have a worksheet with several rows (A3:H70). Column J contains checkboxes (1 in each row). I'm trying to develop a macro that will clear rows based on the value of the check boxes. For example, if the checkbox on J3 is checked, that row (A3:H3) will be cleared.
If the checkbox on J4 is UNchecked, then that row will be skipped and so on.
I have data written in Cells B5, C5, D5 etc that changes as you add more column data
I am trying to figure out how to merge cells starting from Cell B3 based on used cells in row B5 to end of column.
I have a spreadsheet that has columns stating both status and then further to the right in the row, currency totals. There are only two status options, Stocked and On Order. I need to add the total currency amounts based on this other column's listing and it must change if status changes.
(Put simpler:
Column A lists Stocked or On Order and Column B is the currency tied up in that row.
I need to make totals for the cells in column B based on the status listed in Column A and it must change when Column A is changed. This should result in two totals, one for Stock Status Currency and one for On Order Curreny)
I have written this code to clear the contents of certain cells, lock the content of others and protect the sheet again it works on sheet1 but not on sheet 7. This is suppose to happen when the Print button on my sheet is clicked.
View 4 Replies View RelatedI have multiple comboboxes with correlating checkboxes. That is, checkbox 1 goes with combobox 1, 2 goes with 2, etc.
When a particular button is pressed, I would like the combobox to clear it's value if it's checkbox value is false. I was hoping there would be an easier, more efficient process than what I have, which works and is as follows:
VB:
Private Sub cmdbTest_Click()
z = "dep"
Call TestSub(z)
z = "loc"
Call TestSub(z)
[Code]...
I currently have 8 comboboxes. Tags were used for the comboboxes during another process which are not used on the checkboxes, so that option is out.
I need some code that will clear the contents of a Row Range(C:T) if either of the contents of cells X and Y = "E"
The code needs to look at cells X17 and Y17 and continue looking until it gets to X216 and Y216
So - If X = E but Y does not, then the row range C:T must be cleared.
If Y = E but X does not, then the row range C:T must be cleared
If both X and Y = E, then the row range C:T must be cleared
If the letter E does not exist in either X or Y, then the row must be left alone
I'm trying to write a macro that clears the cell in the range V10:X14 if the value of that cell equals 99.
Sub MyDeleteCell()
For i = 10 To 14 Step 1
For j = 22 To 25 Step 1
If Cells(i, j) = 99 Then Cells(i, j).Clear
Next i
Next j
End Sub
It's giving me a "Invalid Next Control Variable reference" I've tried defining i and j as Integers but that didn't work.