Auto Updating MAX Function Utilizing Code?
Aug 5, 2013
It seemed to be working OK for the first hour I had my sheet open. I then noticed that a variation of the following Sub would not update unless I clicked somewhere else in the sheet or edited another non-included cell. It's like something is holding up Excel from running this function and updating the cells if b2 is greater than a3 then a3 will not update to = b2 immediately.
Private Sub Worksheet_Change(ByVal Target As Range)
If [b2] > [a3] Then [a3] = [b2]
End Sub
My data in column B is formula derived and that formula contains data that is live updated data brought in from DDE link.
My question is, should I setup this formula as part of a macro, instead of workbook code and attach an Application.Ontime function to ensure reliable execution? Could too many IF statements cause delays (about 100 of them currently in the code Private Sub Worksheet_Change(ByVal Target As Range))?
View 1 Replies
ADVERTISEMENT
Oct 29, 2008
I have fought with this for 2 days and I am trying to have a worksheet cell update the date and time if the cell it is referencing (B3 see below)
Here is the formula I am using however it updates every time a new row is added to the worksheet. So the Date/Time stamp on each row is always updated to NOW() everytime.
=IF(ISNA(B3),"0/0/00 00:00",NOW())
I would like to have a Date/Time stamp stay as is once that row has been added. Is there anyway to stop the field from updating once the date and time have been set?
View 9 Replies
View Related
Nov 1, 2008
I would like to start with a spending value, (SV), that would be the amount of money that I want to spend in a year, not counting taxes. The function (or functions) would then go through some sort of iterative calculation process that would compute the total spending level including taxes, (TS), the federal tax, (FT), and the state tax, (ST).
These values would have the relationship that TS=SV+FT+ST. When the iteration was finished, the federal tax and state tax amounts would be consistent with the taxes that would be due for this level of total spending as determined by the normal tax tables for both federal and state taxes.
I am not concerned that the tax figures be absolutely exact, so a lot of iteration is probably not necessary.
View 3 Replies
View Related
Dec 18, 2012
I have 2 drop down menus based on car make and model.
The first contains Make and the second contains the models of that make using the indirect function (All through data validation (this may be my problem))
Now what I'm wanting is that when the Make changes, the Model will automatically changes to either the top (or any really) model from the list for that make or to change to blank. So can this be done without VBA?
View 4 Replies
View Related
Jan 5, 2009
It's some code I found and altered that automatically updates the cell to the right of a column that has drop down box data validation, creating a list of the selected values seperated by commas. The thing is, I only want it to do this in columns 8 and 10 but data validation drop-down boxes have been used in several other columns. I've tried various methods of limiting the scope, the latest being the line: If Target.Column = 8 Or 10 Then. But the auto update is still being applied to all drop down boxes in the sheet. So, how can I make sure the auto update only happens when the drop down boxes in columns 8 and 10, updating into columns 9 and 11.
View 4 Replies
View Related
Sep 20, 2006
Everytime that I insert a row into a worksheet which a number of formulae refer to, those formulae get updated automatically in such a way that it is not in my favour.
The formulae refer to rows 2:2000 on a number of different columns. Adding a new row shifts the references to 3:2001. I presume that I can stop this from happening
Example:
= SUMPRODUCT(('List of DD Donors'!E2:E2000)*('List of DD Donors'!F2:F2000='DD Tally'!E6)*IF(DATEDIF(('List of DD Donors'!G2:G2000)-1,DATE(2006,3,31),"m")>12,12,DATEDIF(('List of DD Donors'!G2:G2000)-1,DATE(2006,3,31),"m")))
changes to...
=SUMPRODUCT(('List of DD Donors'!E3:E2001)*('List of DD Donors'!F3:F2001='DD Tally'!E6)*IF(DATEDIF(('List of DD Donors'!G3:G2001)-1,DATE(2006,3,31),"m")>12,12,DATEDIF(('List of DD Donors'!G3:G2001)-1,DATE(2006,3,31),"m")))
View 4 Replies
View Related
Feb 11, 2006
What I am wanting to do is have excel insert a static date automatically. I know ctrl + : inserts date and ctrl shft + ; inserts time. I want excel to do this automatically. The now() and today() functions auto update the date. I dont want the date auto updated when the file is reopened after it is saved. The file is a template so I guess what I am really wanting is a automatic date/time stamp when the user saves the file so when it is emailed and reopened the date does not auto update.
View 6 Replies
View Related
Jul 3, 2014
So, I work in a large indoor grow facility, and as such, we need to keep an active, updated calendar of all activities that will need to happen in the grow. If something happens to a set of plants, we need to change to date of transplant into the next pot size and every transplant after that, as well as moves into the flowering room from the vegetative room.
I have tried to manually make a calendar (I'm not worried about auto-generating a calendar or auto-filling dates, only things that happen on those days.) and tie in this information, but I'm having issues automatically searching a column and finding the date, and then pulling more information from that row automatically. (i.e. If anything in Column E has the date 7/3/14, then fill the data from Column C and Column B on the same row.)
I'm attaching a copy of the spreadsheet that I am trying to pull the Data from, and a copy of the Calendar I mocked up.
FYI, the spreadsheet I am pulling from Automatically fills once you put in the Clone Date, and then if you add in an adjusted date, it will adjust all later dates from that same section.
I tried to find something other than Excel as well to do this for me, but AFAIK nothing exists to make the calendar update Live, only to reproduce a new calendar with the current spreadsheet. This is not an option, I need it to stay up to date.
View 7 Replies
View Related
Aug 13, 2009
if it is possible te refer to a cell in another worksheet.
I have 10 worksheets in sheet one I put in cel A4 a digit en sheet 2 I put the formula that refers to sheet 1 cel A4.
Now I want a formula that refers to sheet -1 so in sheet 3 the formula automatically refers to sheet 2 cel A4 and in sheet 4 the formula automatically refers to sheet 3 cel A4 without corrections to the formula.
View 9 Replies
View Related
Mar 13, 2014
Have been trying to set a chart here to autoupdate which normally is fine to do. In this case however there are other columns in the data table that run down to Dec 2014. Even if i define my needed range, the graph will show the full timeframe (with lots of unneccessary space).
I've attached an example. Rate % is the column that will be updated monthly and I would like the graph to only increment along when a new figue is entered here. I've defined this range as 'Rate' within the sheet.
View 3 Replies
View Related
May 21, 2009
Running XL07. Need to have one workbook pull data from several dozen others.
Have columns to the right that refer to the query table.
As I add in queries to other workbooks, the time to update each individual query goes up a lot; it feels as if the update time is increasing geometrically. I'm giving up after 2 hours, for query updates that used to take
View 9 Replies
View Related
Feb 20, 2008
I have the following macro which runs vlookups between two sheets in excel. Whenever i add columns to the range the vlookup column reference is not the correct cell. Is their any way I can adjust the macro so that the column number adjusts in the formula when a new column is added??
Sub template()
Range("C7").Select
ActiveCell.Formula = "=if(VLOOKUP(C6,'Project master'!B7:BG150,3, FALSE)="""", """",VLOOKUP(C6,'Project master'!B7:BG150,3, FALSE))"
'category
Range("c9").Select
ActiveCell.Formula = "=if(VLOOKUP(C6,'Project master'!B7:BG150,4, FALSE)= """", """",VLOOKUP(C6,'Project master'!B7:BG150,4, FALSE))"
'sub-category
Range("c10").Select...................
View 3 Replies
View Related
Feb 21, 2014
I need it to be like:
=B10 2014
(So the first part changes depending on what B10 is but the 2014 always stays)?
View 9 Replies
View Related
Jan 3, 2014
I'm trying to create an autoupdating price list using a part number and a website. I've tried Excel's data import wizard.
Website: WebFLIS - Public Search
Sample data Category
Chaplain Kits
Item
Chaplain's Kit, Consumable
NIIN
9925-01-326-2855
Price
$276.94
Description
Also called the ReSuppply Kit
VBA Code that allows me to automatically open the page.
Dim IE As Object
Sub submitFeedback3()
Application.ScreenUpdating = False
Set IE = CreateObject("InternetExplorer.Application")
[Code] ......
Ideally, I'd like to click a button that says "Update Prices" and it will search WebFlis for the NIIN listed and update the price. I have 717 items on my list so updating would be by click only (I think I can write that portion).
If that is not an option, I'd like to be able to click on each item row (think hyperlink) and be able to see the results for that individual item.
View 9 Replies
View Related
Dec 30, 2009
I have the folowing vba function that i use to check the existance of files but when the workbook is refreshed, the formula doesn't update. It's only updated when i double click it's cell.
View 2 Replies
View Related
Aug 8, 2014
What I need to do is basically use one sheet from my workbook as a 'template' for all the other sheets, but in a way that when I make a change to a formula on my 'Template' sheet all the other sheets based off of it follow suit. I need to do this because for 100000's of rows, spread across different sheets, I have product information populating Columns A-G, and their unique cost in Column H. I need to apply markups to each product (row), but all of these markups are standard across every product and thus every sheet. So in the perfect world I would be able to edit the formula on Sheet #1, and then have that change be reflected in every other sheet.
So let's say I have something like this on Sheet #1...
[URL] .....
Where Column C is a product of A & B...ie. "=A2*B2"
What I need to happen is on Sheet #2 is for it to somehow pull the same formula that is on Sheet #1 in Column C, but apply that formula to 'A2' & 'B2' on sheet #2. And I also want it to update whenever I change the formula in Sheet #1.
If it requires that I set up a template on a completely different workbook, that is perfectly fine as Sheet #1, my 'Template' Sheet, does not hold in actual product information.
View 14 Replies
View Related
Mar 1, 2013
I created a simple custom function called File_Path() using this macro line:
File_Path = ThisWorkbook.Path
I use the function in Cell A1 and it displays the path, but it doesn't automatically update when I change the path. I have to use F2 to get it to update. I have automatic calculation on.
View 6 Replies
View Related
Jun 25, 2008
I'm using a heavy excel file and I have linked some cells in one sheet to other worksheets in the same file. My problem is that when I change the value in some cells they do not change in the other cells linked to the ones I have modified.
View 7 Replies
View Related
May 5, 2009
I have two sheets. One called "Roster" and one called "final". On the final sheet i have cols for each question on the final exam. I also have a total col which sums up the pts for each question.
On the "roster" sheet. This is kinda like a summary sheet. On this sheet i use a vlookup (shown below) in the cells which are supposed to reference the cells on the "final" sheet for the total pts.
View 10 Replies
View Related
Jun 4, 2014
I have information that I want to pull using an If, Then statement. The goal is to populate the information in column J with the information in column A by matching the information in columns B and C.
Is this possible with an If, Then function?
View 6 Replies
View Related
Aug 28, 2007
I have some code sat in worksheet_change (or worksheet_pivotupdate):
If ActiveSheet.PivotTables("PivotTable2").PivotFields("Area").CurrentPage = "(All)" Then
ActiveSheet.PivotTables("PivotTable3").PivotFields("Area").CurrentPage = "(All)"
End If
If ActiveSheet.PivotTables("PivotTable2").PivotFields("Area").CurrentPage = "London & Essex" Then
ActiveSheet.PivotTables("PivotTable3").PivotFields("Area").CurrentPage = "London & Essex"
End If
The problem is that this code runs over and over again, as each time the pivot table updates, it constitutes another update, and so on and so on....
View 3 Replies
View Related
Sep 8, 2009
Column A contains State names; column B contains a few cities for each of the states. Row 1 contains rank as the header row. Then the table begins in cell C2 with the rates. I have two of these (on separate sheets), one titled w dep (with dependants) and the other w-o dep (without dependants). On a third sheet I have 4 combo boxes.
1.Chooses between Dep or W-O Dep
2.Chooses Rank
3.Chooses State
4.Chooses City
Here are my questions.
•How can I filter down the cities so that if I chose Texas for example, only the cities from Texas would show up in my combo box?
•I have figured out the formula to display the results from the w dep sheet but cannot get the information from the w-o dep sheet. Here is the formula I’m using.......
View 3 Replies
View Related
Mar 19, 2013
Is it possible to use Sumifs to calculate multiple columns i.e. if a summary were able to sum Part No. 742810 O-rings for March it would arrive at 24 O-rings and 20 of the same for April. I tried it using
=SUMIFS(Issues!$F$2:$F$6,Issues!$B$2:$B$6,B8)
(Example) but it seems that Sumifs may have restrictions on the number of columns.
******** language="JavaScript" ************************************************************************>
Microsoft Excel - Parts Distribution.xlsm___Running: 14.0 :
OS = (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutL2L3L4L5=ABCDEFGHIJKL1Parts Description Part No.EquipmentMar1Mar5Mar12Mar30Apr6Apr17Apr27May3
[Code] .........
View 5 Replies
View Related
Feb 25, 2007
Is there a built-in dialog box that allows the user to select a range by clicking and dragging with the mouse? I'd like to use this in my code and have the dialog box return either a range object or and address that I can use in a range assignment statement. I'm looking for something like what you get when you select Insert-->Name-->Define. The "Refers To" text box at the bottom automatically updates as the user clicks and drags across cells. Is there such a thing accessible via VBA?
View 2 Replies
View Related
May 12, 2009
I am dealing with several very large spreadsheets using VBA to do various things. I found that my code worked well, but was taking a long time to run. The biggest time consumer was my use of the AutoFilter features. I have since turned calculations to manual before my code runs and set it back to auto when my code is done running. What are the potential consequences of my turning calculations to manual and then back to auto?
View 2 Replies
View Related
Mar 10, 2014
I am creating a spreadsheet utilizing the National Vulnerability Database (NVD) from NIST.
I am successfully able to import the xml files and have the xsd mapped fine.
My problem is within each xml files for each records(1000s of records) there are sub pieces to certain record parts. I.e. software versions (that will be different per piece of software) however they will always fall under prod vendor
"
"
Excel creates a new row for each of these.
How can I make it only create the 1 row and comma seperate those?
View 1 Replies
View Related
Dec 11, 2013
I was wondering if there's a way to add a formula to calculate week over week % change automatically every week when I enter in new data. see the attached excel file for reference.
What I would like to have is the ability for the formulas in c5 and f5 to be able to auto-update to the newest week and the previous week's data instead of manually having to update it each week. So if I were to add a new row with data for week beginning 12/2, the formula in c5 and f5 would automatically update to calculate the week over week variance. I tried researching prior to asking the question on this forum, and I think it may be possible to do it using the index match function, but I'm not sure how to apply it in this case.
View 3 Replies
View Related
Apr 25, 2013
I have created a simple Macro to change the Tab color of a worksheet based on the value of a specific cell. This spreadsheet has many worksheets (>20) and this sheet I have used as an error detection. If it see's an error on some other sheet, this cell will change from "OK" to "Error". The Macro then changes the Worksheet tab color to Red. The Macro works fine but ONLY if that worksheet is the open/active sheet (which kind of defeats the purpose). How can I trigger this Macro when this Worksheet is not the active sheet? Here is a listing of the Macro
Sub Worksheet_Change(ByVal Target As Range)
Dim KeyCell As Range
Set KeyCell = Range("A11")
If KeyCell.Value = "OK" Then
Me.Tab.ColorIndex = 6 ' Yellow
Else
Me.Tab.ColorIndex = 3 ' Red
End If
End Sub
View 3 Replies
View Related
May 18, 2007
when using ato filer and I select an item id like to look I try to sum up the total at the bottom but it doesnt give me the correct answer.
So now i am manually soring and going through the data to get the correct totals.
View 4 Replies
View Related
Dec 19, 2008
Need to add an auto sort code to the end of this worksheet module 2, so that after all the dates are figured, it will sort by this date, no matter how many dates there are.
View 5 Replies
View Related
