I am trying to use following string to find result into column F and unable to find reason for Error.
=INDEX($C$2:$C$5,MATCH(D2&E2,$A$2:$A$5&$B$2:$B$5,0))
A
B
C
D
E
F
1
part
code
price
find part
find code
Result
2
x
11
5
y
12
#VALUE!
[Code] ........
I want to use a value in one cell as a row designation, and a value in another cell as a column designation. Ultimately, the values will be text which will refer to row and column headers. What formula would allow me to do this? example:
A1 contains B
B1 contains 2
B2 contains "tribbles"
An imaginary function might go like this........
I have this table
.......A.....B.....C....D
1.....I......a.....d.....g
2.....II.....b.....e.....h
3.....III....c.....f......i
As you can see, the number I has a,d,and g, II has b,e,and h, and III has c, f, and i
I want to make formula that if I make the input g it would return I, f would return III, and c would return III, and so on
I want to make four formulas by using VLOOKUP, INDEX, MATCH, INDEX&MATCH separately.
I have a number of identicle tables, that have all been seperatly named. On a summary tab i am using an index match formula to pull back key pieces of data from the table that is identified by cell B2. So if in B2 their is SCB, i would like the formula to apply to the table SCB. The formula (when useing the word SCB works fine):
View 2 Replies View RelatedI think I need to combine functions to allow me to automate data entry from a table from another worksheet. If the Name entered in column A on Exp Breakdown matches a name in column A of Salary Breakdown I cannot seem to write a function to scan the table in Salary breakdown and lookup the percentage that person is paid from a specific program number. I have attached a sample worksheet to hopefully make it easier to understand.
View 3 Replies View RelatedI have created and named a table with salaries based on years of experience and education.
I am having trouble writing a function to search for a specific amount and result in the the cell below that specific amount.
So people are moving up by one year on the schedule I would like to use their current salary to lookup and display their salary for next year.
I am confused on how to incorporate the different functions I am assuming an index and a hlookup...
I have a data table, called Table1 in Sheet1. In a simple form it is
Customer ID
Comment
A
asdf
B
jkl;
So in VBA, I need to figure a way to give me the cell address of the matching cell in Comments. So say Customer ID starts at A1 ... that means the Comment for Customer A is B2.
How would I get that reference in VBA?
I have an array formula which is working as expected returning the value of column K (offset by -1) if a number of criteria are matched.
[Code].....
The issue I'm having is there are occasionally duplicate values in column W and it's using the first value in its return, which isn't always correct.
Unfortunately due to the limited matches available the only way I can think to identify the correct value is by adding an additional criteria, which is that the correct value would always have a negative in Column X one cell above and to the right of where the value is being retrieved from. If there was no negative it would ignore this result.
Is there any way to add an additional criteria to the formula to stipulate that it must match a negative in column X but one cell above?
I am trying to get an Index-Match formula to search a different sheet depending on the value selected in a particular cell using a dropdown list. See the attached workbook.
View 3 Replies View Relatedmake an adjustment to my Formula so that if the Index match locates a cell that is blank it returns a blank cell rather than a 0. I know we need to add in =IF(iserror( but i am aving trouble..
View 5 Replies View RelatedAttached file 140515 Matchsheet.xlsx has formula that finds costs matching two criteria.
But the formula depends on me typing in the specific Worksheet Name: So to find the cost for 'Type 1' products, I enter:
=IFERROR(INDEX('Type 1'!$E$5:$F$11,MATCH($C$4,'Type 1'!$C$5:$C$11,0),MATCH($D$4,'Type 1'!$E$4:$F$4,0)),"")
I want the formula to "see" the sheet name as whatever is in a specific cell.
E.g. Cell B4 says "Type 2". The formula will be:
=IFERROR(INDEX('[WHATEVER NAME IS IN B4]'!$E$5:$F$11,MATCH($C$4,'[WHATEVER NAME IS IN B4]'!$C$5:$C$11,0),MATCH($D$4,'[WHATEVER NAME IS IN B4]'!$E$4:$F$4,0)),"")
I have a rather large table that I need to return the column heading from.
Within the table I have a list of Names in the left most Column (A) and a list of Percentiles in the header row (row 2) (incrementing by 5%). By inputting the name and a cell value I am trying to return the column header.
Using an example;
5% 10% 15%
Bob 3.5 4.1 4.15
John 3.6 4.2 4.30
Chris 3.3 4.9 4.95
Sammy 3.7 4.6 4.7
Like I said, knowing the name and the cell value, I want to return the percentage value. So for example, Bob would be one input value, and another input value would be 4.1. I would want excel to return 10%.
I have found different suggestions using a combination of index/match but even using these functions I cannot get it to return the COLUMN value instead of a cell value.
I am running an Index, Match off of totals, what I would like to do is when the formula finds the column_index_num to move up one row and bring that value back.
For example: if I am going to sheet2 and my formula would normally pull back the information on row 7 with a column_index_num of 5 (or column E), I want to bring back the information on row 6 column E.
How do I add the variable to bring back the information one cell above?
If a INDEX,MATCH function returns a zero, how do I get it to use the value in the adjacent cell which is a unique number?
=INDEX(Sheet2!A:C,MATCH(A2,Sheet2!A:A,0),3)
Example:
How can I modify the following formula to find the contents of reference cell, for example if the cell reference (G$3) is equal to 9 I want it to use 8 instead.
Code:
IF(ISERROR(INDEX(tra!$E$2:$E$1100,MATCH(G$3,tra!$C$2:$C$1100,0))),"",
INDEX(tra!$E$2:$E$1100,MATCH(G$3,tra!$C$2:$C$1100,0)))
I tried using G$3-1 but this doesn't appear to work.
I am trying to match data from 2 independent sets, formatted slightly differently so not sure which function would work best for me. From the attached file, I am trying to match the date and time stamp (in cell A1) with that from the other data (in this example in cell E1) and return the data (from cell F1) to cell C1. So basically any date and time stamp before 04/03/09 04:00 will return a value of 44 (this value should appear, therefore in cells C1 - C30)
View 2 Replies View RelatedWe know how INDEX/MATCH works, and it's very nice. I attached a COUNTIF to it to count how many times the index finds itself on another table; if it doesn't find itself, then it goes blank. However, this time I need to count how many times it finds a certain string condition in the other table.
sampleexcelhelp.xlsx
The columns that need to be filled are shaded in dark pink.
See attached file, "Rate Sample Index-Match Formula".
I need a formula to return the value at the cross section of two (2) lookup values that match. This formula will be input into column D under, "RATE" on the 1st tab, "TEST FILE".
In the 1st tab, "TEST FILE" there are a series of columns as follows;
A = Service
B = From
C = To
D = Rate
In the 2nd tab, "RATES" there is a series of rates with drivers From (green) & To (blue)
The formula needs to do the following;
1. Lookup the "From" value in column B on tab, "TEST FILE" and match to column B2:B59 on tab, "RATES" both highlighted in green
2. Then Lookup the "To" value in column C on tab, "TEST FILE" and match to row C1:BH1 on tab, "RATES" both highlighted in blue
3. Then return the value at the cross section of the match "From" (point 1 above) & "To" (point 2 above) in range C2:BH59
For Example;
The rate From SYD To CBR = 0.33. I have highlighted this in yellow on both tabs to show where the formula needs to lookup the data to return the answer.
Additionally, if we were to add service as an additional lookup match how would this work?
I'm having a bit of a block with an index/match formula that I am trying to create for the attached spreadsheet. i.e. I need to populate cell J3 with the info the corresponding letter contained in the table to the far left. The numbers of reference to match are the 'zones' in H3 and J2.
View 2 Replies View Relatedcode that will be able to lookup a cell in Column J of Sheet1 by using a lookup value on Sheet2. The lookup value can be any cell in columns B, D, F, H, J, K, or N on Sheet2. The tricky part is, I want the result of this lookup (the result comes from Column H of Sheet1) to be placed as a data validation input message for the cell directly to the right of the lookup value when this cell is clicked.
For Example: Lookup Value is "416991" which lies in cell N8 on Sheet2. Look it up in Column J of Sheet1 and return the appropriate value "X" from Column H of Sheet1. "X" will then appear as an input message when cell O8 of Sheet2 is clicked.
I have two sheets of data , sheet A and Sheet B.
Sheet B contains a column called "Name" and for each name, and for each name there are corresponding numbers. In sheet A, I have a "list of interest" in column A. What i want to do look through the data in sheetB to find a match from the list of interest and return the corresponding letters, located in column A.
I have filled out the first two rows of results that should be returned as an example.
One idea i had was to put a vlookup formula in each column result 1 to result 6 so i can catch all 6 "Serves" columns from column B, but there may be duplicates in the serve columns and vlookup only reports the first match.
Basically where the columns say 2011 or 2012 AND 1, 2, 3. I want to be able to have it index the number below based on the GL number on the left and both the year and period on the top. I think that you can do with using the sumproduct function with the binary, but the computer is a little dated and it takes a while to run those calculations.
2011
2011
2011
2012
2012
2012
[code].....
INDEX/MATCH multiple ocurence match values needed
View 9 Replies View RelatedI'm trying to hone a quoting tool to generate an amount based on a given range and minimum charges for specified subsects of the range. If you reference the attachment I'm trying to calculate a charge in cell K15 based on values in B9 and C10 referencing the table I8:R9. What I cant figure out is how to create a minimum charge of 50 for J8:P9 (points A-G) and a charge of 95 for Q8:R9 (points H-I).
View 2 Replies View RelatedIs it possible to return a value or a sum of values using segmented lookup criteria. The Sample 1 spreadsheet (attached) explains it better.
View 10 Replies View RelatedI couldn't resolve the formula of Index-Match for getting the values that matches the following criteria
1) Match the "Category" of Table 1 to Table 2
2) Match the "value" of Table 1 to Table 2, if value is not present in Table 2 take the upper closest value.
Once the above conditions are met, Take the Result from Table 2
Table 1 is for Input and Table 2 is for Database.
Please note that Data in Table 2 should not be sorted in any way. I tried to use the -1 option of the Match function for upper closest value but it didn't work out.
Have a look at the file attached : IndexMatchUpperClosestValue_AlongwithExactMatch.xlsx
I currently have a spreadsheet with two sheets. The first is my reporting sheet and the second is called Stores. I currently am using the following formula in the reporting sheet:
View 3 Replies View RelatedI am looking to sum the values found at the intersection of multiple values based upon a vertical and horizontal lookup. The formula I am trying is as follows (which results in #Value):
{=IF(ISBLANK(G$9),"",SUM(IF(INDEX('Journal'!$A$20:$Z$1020,MATCH("Prior",'Journal'!$F$20:$F$1020,0),MATCH(G$9,'Journal'!$H$19:$Z$19,0)),"")))}
I have three columns (Location, Task, Time) that I want to gather information from and display on a separate page.
I've used SUMif Function to group task and time together. I want to separate this information between different Job Locations. I believe INDEX and MATCH functions need to be used??
For example: job1 will only display relative hours for that location, While Job2 location will display relative hours on a separate summary page.
Am trying to figure out the best way to combine into 1 cell an ISNA(Match... and a Lookup array that will run if the ISNA(match ... returns a false value.
Right now it's running in 2 separate cells ISNA(Match ... and then an if statement that if the ISNA(Match returns false, that the look-up runs, if it doesn't return false, then the value is 0)