Conditional Value Return
Jun 30, 2009conditional value return. See the attachment.
View 3 Repliesconditional value return. See the attachment.
View 3 RepliesI currently use VLOOKUP to return a value from other spreadsheets. However, I need Excel to firstly check the contents of a particular cell, and then decide which spreadsheet to look up. So, for example if the vaule in cell C3 = 1 then VLOOKUP spreadsheet "ABC", if value in cell C3=2 then VLOOKUP spreadsheet "XYZ" and so on.
View 4 Replies View RelatedMain (Sheet1) - Got a table with several informations relative to a number of a house
House1 (Sheet2) - Want the information extracted from Main (Sheet1) to a table.
House2 (Sheet3) - Want the information extracted from Main (Sheet1) to a table.
So basicly i want to extract the info from Sheet1 if it matches the Number of the House on sheet2.
With Vlookup can only get a cell value as i am not an expert in excel
See the attachment
Is it possible to return NA() to cell A10 if A10>A9, without adding a 3rd cell ??
I am trying to modify this formula to do one more thing, but I can't quite figure out how to do it. I have part 1 and 2, but part 3 is giving me a very hard time. The formula is not working correctly. It is supposed to do several things.
Do an HLookup for a row and return the last value in the row.If there is no value (blank), the value should be "Incomplete."If HLookup finds a value of "Fail," it should look to see if there is a value of "Pass" BEFORE (to the left of) "Fail." If this exists, then it should return a value of "OK."
Here is what I have so far....
I have the following data; B1 and B2 are entered by the user and are named 'heat' and 'race' respectively. Conditional Array Formula Example.xlsx I'm after the ROW number that matches the minimum time (col C) for the heat and race combination shown - in the example below (heat: A, race: 100m), I'd like row '5' returned (or, better still, row '2' of the array A4:D11), as that's the lowest time for Heat A, 100m.
A
B
C
D
[Code].....
but this dosesn't exactly seem elegant, and doesn't work!
ie I simply want the row number (ideally relative to the range) for the lowest time for any given inputs 'Race' and 'Heat'.
I have a conditional format that does not seem to be working for me. Cell B2 has a drop down optionSelect, No, Yes); Cell B3 is supposed to be conditionally formatted to return the following results if the criteria is met:
If B2 is equal to No or Yes then colour should become Yellow
If B3 is >0 then colour should become Blue
The problem is when B3 is greater than 0 it does not change the cell colour to Blue.
B3 Conditional Format #1 is =AND(ISTEXT(B2),B2<>"Select")
turn background to yellow
B3 Conditional Format #2 is =AND(ISNUMBER(B3),B3<>0)
turn background to blue
See attached for spreadsheet with conditional formats
I recently learned how to count cells in a range based on the value from another column (excel 2007) How to count cells in a range based on the value from another column but now how I can go about returning a value from another column that matches the conditional counting. For example in the table below I'm first wanting to find the rows matching "chr15" from column A that also have a value from column B that is greater than 25,000 and less than 3,000,000. But what it I wanted to instead report the corresponding values in column C? I've played with VLOOKUP to no avail but I'm not sure if that's the right line of thinking. The answer would be the values in bold.
A B C
1 chr2 12008 AA
2 chr2 149700 BB
3 chr15 51 CC
4 chr15 5624 DD
[Code] .........
I have a report that shows when our company has shipments covered by inventory (although you are not seeing the conditional formatting in the table). Columns K:Q represent shipment dates and shipment amounts. Columns D:I represent inventory with Column J being the total inventory. The conditional formatting works to highlight the cells in K:O of when shipments are covered by inventory. I need to be able to return the date (Columns K:Q) for an item (Column B) when a shipment is not covered by inventory.
For example Row 154: all shipments are covered by the amount of inventory. A shipment of 3 on 04/24 is more than covered the 105 pieces of inventory. But for Row 170, the shipment for 480 pieces on 04/23/12 does not have enough inventory to cover.
The result I need to return for row 170 is that 480 pieces are due on 04/23/12 that are not covered.
What formula would I used to return that value?
Excel 2010ABCDEFGHIJKLMNOPQ1LineITEMNEXT CUSTOMER PART WIP INVENTORYSTAGINGFINISHEDINSPECTDCYTRAILERTOTALPast4/18/20124/19/20124/20/20124/23/20124/24/20124/25/2012154Tabber105290325AA05290325AA-DC000010501053155Tabber1070025AC-EXP070025AC-
[Code]....
I am trying to use CF to return a text if a condition is met. Here is my CF formula which doesn’t give me any value in return.
=IF($C$31="N/A","","MM DD YY")
Allows me to check like 10 different text values and return false for all of those in the conditional formatting rule. When those are not present, the conditional format is true thus applying the format.
I tried
=NOT(FIND("text1",$A$1,1))
It did not work because I believe this statement doesnt give the rule its TRUE value its looking for.
I am having trouble with this, to clarify I need the below...
Cell has conditional formatting checking for text1 text2 text3...text 10ish and if they are present nothing will happen and if they arent present then format the cell.
EDIT: to clarify, the code should look for either text1 or text2 or text3 so on...
In the attached workbook - the stock Inventory is increased, every second day, by the value shown in cells of column A. Column B displays the date of the update. I'm looking for a Formula (might be an Array Formula) that will return the latest date before the stock turns to be greater than the value in cell D3. I managed to solve it, in cell F3, but with the help column C.
View 2 Replies View RelatedI am trying to use a PRODUCT formula to return the product of a list of numbers in a column, between 2 specified dates. The spreadsheet is arranged as follows:
Column BA list of dates
Column C & DNumerical data not used in any calculations
Column EThe numbers to multiply together
Cell A1Start date to be used in the PRODUCTformula
Cell A2End date to be used in the PRODUCT formula
The formula I have to multiply the data in column E, subject to the start and end dates in Column A is:
{=PRODUCT(IF(B15:B1000>A1,IF(B15:B1000<=A2,INDEX(B15:E1000,0,4))))}
This returns zero though works appropriately if I replace “PRODUCT” with a “SUM”.
I am trying to create a data entry sheet to enter quotes on. When a quote is received, I click on my "Add quote" button and a userform appears. Data is entered into the userform (frmEntryForm) and returned back to the next available row.
I also need to be able to:
Edit a row by double-clicking it. When a row is double-clicked, data from that row is passed back to the userform, edited and returned back to the same row (to prevent duplicates).Validate that all fields are complete within the userform where relevant (i.e. if the work is not complete or in progress then the "Invoice Number" and "Actual Cost" fields are disabled and blanked to prevent entry (I think this is almost sorted judging by my tests)
I have attached my sheet : 2014 Gatwick Quote Log (Macro Enabled).xlsm‎
Is it possible to change the format of cell AI3 based on the format of cell C3 and D3? I have C3 and D3 set to turn red based on what is in cell C2 and D2. I would like the following done:
If AI3=C3 & C3 is red, format AI3 blue
If AI3=D3 & D3 is red, format AI3 blue
Otherwise, leave AI3 unformatted.
Possible???
Having trouble changing this formula from its current Median to a Quartile or Percentile. The median formula looks like this:
(MEDIAN(IF(DATA!$B$15:$DZ$15=1000,DATA!$B26:$DZ26))) and works perfect.
However I can't figure out how to manipulate it into a percentile keeping the condition of
IF(DATA!$B$15:$DZ$15=1000)
How to return address of the column or cell I selected from Application.Inputbox, not just return the value?
[Code] ....
Is there a way with the following formula to tell it that if value return is = to value of cell above then find return next value?
View 6 Replies View RelatedI need to run a loop through a column of values (attachment col B) and when it finds a "J" it will apply conditional formatting to a row of 4 cells directly adjacent. The attachment is a theoretical before & after.
View 2 Replies View RelatedI have a list containing blocks of stock price values with each block representing a series of values at a given time e.g
1400 156
1400 99
1400 74
1400 86
1400 256
The number of entries may vary for each block but is never more than 60. the next block may be e.g.
14:05 15
14:05 42
etc
and down a very long list of around 65000 entries. I'm looking for a routine that will add up all the values in each block and calculate the total for that time block. I then need to fill in an adjacent column with the perecentage that each value is of the total. A completed block may look like;..............
I am trying to find the largest value, second largest, and third largest value for a column of numbers then return a content value for the adjacent column that contains the name for which each. The problem I am running into is when the second highest has the same value as the highest and also when the third value is zero (n=meaning there are only non-zero numbers for the column). I am using these formulas currently whic work when the numbers are not the same and I have atleast 3 non-zero numbers but I need to modify in order to account for the problem stated above...
View 8 Replies View RelatedHi, I desperately need help with a pivot-table and can't find anyone else who's ever had this problem...I have a very large healthcare data table which for simplicity I will describe as follows. In essence the first two columns respectively are (A) location and (B) month. Let's say the third column (C) is the number of cases of the disease kidpox treated in each health centre during that month. The fourth column (D) is the total number of cases of everything treated during that month in each clinic. The fifth column (E) is the proportion of cases of this disease over all consultations for each health centre and month, and the formula in E2 is .....
View 9 Replies View RelatedI am using the averageIf function and I need the cell to show 0 when then results are not positive. How to resolve my calculation
=AverageIf(a1:a10,">0",a1:a10) displays #DIV/0!
I want it to show 0 only
I have five fields that have a conditional format applied to them: (see attached).
Columns J, K, L, N and O. These conditionals highlight if a minimum number is entered. Ex. Minimum pushups for a 30 y/o male is 27, if a 26 is entered it highlights red. The total score (where I need this to perform) is calculated in column Q. It will format red if the total score is below 75 but what I can't figure out is how to make it format if any of the previous minimums have not been met.
Ex. In cell L4, his crunches were 25 (a automatic failure -- red formatting). Now the total score is above 75 so it calculates as passing (green), but I need it to highlight red regardless because of the minimum not met in cell L4.
I have a dataset of annual values which I need to combine into an array. Each year's data is in a separate worksheet, and contains between 4000 and 6000 rows. I set up a master sheet listing all unique locations for the entire period of record, finally got over the tics and brain damage from that one, and put in a VLOOKUP function for each column to retreive that year's data (examples-
=VLOOKUP($A2,'1995_5580'!$A$2:$E$5581,5,FALSE) =VLOOKUP($A2,'2002_6052'!$A$2:$E$6053,5,FALSE)). Works great. I still need to get something other than #N/A for not found values, but I can figure that out. Checking the results, I discovered that a very small percentage of the locations have more than one entry. In order to make this matrix useful, I need to have a sum of all values that match a given location. VLOOKUP only gives me the first match.
Now, the problems- I can't post a workbook, because it's confidential data. I would really prefer to stick with functions and not macros, because a lot of macros seem to get picked off by the firewall (I'm working on a network drive). I've seen similar problems addressed here with PivotTable (won't work here because a large number of locations are missing in one or more years and each year has a different number of data rows) and array formulas (data is on 23 separate worksheets). I really, really don't want to go through 100K+ rows of data to manually find duplicates and enter them into the master sheet. Not only would it short out my few remaining brain cells, it's inelegant.
I'm working with an ancient greek lexicon, and I'm trying to get all the parsing to line up.
I have a table with
A
B
C
D
E
1
ἀκούω
I hear
present
first person
singular
[Code] ........
I want column F to display "present" if the row contains the word "present", "future" if it contains the word "future" etc
My problem is rather similar to [URL] .........., but I'm trying to search the whole row rather than a single cell.
{=(--if(isnumber(search("tfr",c:c)),"tfr","")+(--if(isnumber(search("payment",c:c)),"eft","")","")+(--if(isnumber(search("american",c:c)),"amex","")))))}
I am trying to look up column C and if it contains tfr then return tfr or if it contains payment then return EFT etc etc.
I have also tried using this one as I can use more than 7 criterias. Only problem is that return EFT for all ect where does not contain TFR or payment brings back EFT
=IF( SUM(--ISNUMBER(SEARCH({"Tfr","PAYMENT","AnotherTerm","And Another"},C:C ))),"TRF","EFT")
I need to have a cell value not return - ( of any number) as it effects additional cells calculations the current formula used is =G4/50-SUM(I4:V4) I basically only need it to count down to 0 reguardless of the entries in l4:v4
View 2 Replies View RelatedI have two criteria that need to be met when running a macro to record a timestamp. First - the timestamp needs to be recorded in the first blank cell in the correct column, based on a selection made in a userform. Second - the next timestamp taken needs to be recorded in the same row as the previous timestamp. The times are being recorded in columns D, F, H, and J. So as an example.....
I record the time in column D, but I skip column F and record the next time in column H. That's fine - the timestamps are in the same row (say row 8). Now I record the time again in column D, one row down (row 9).. But this time I don't skip column F.. the time doesn't get recorded in row 9; it records in row 8.
Sub MacroD()
Dim LR As Long
LR = Range("D" & Rows.Count).End(xlUp).Row + 1
ActiveSheet.Unprotect
Range("D18:D" & LR).Value = Now
UserForm1.ListBox1.Text = "Time"
UserForm1.ListBox1.SetFocus
' UserForm1.Show
End Sub
Sub MacroF()
Dim LR As Long
LR = Range("F" & Rows.Count).End(xlUp).Row + 1
ActiveSheet.Unprotect
Range("F18:F" & LR).Value = Now
UserForm1.ListBox1.Text = "Time"
UserForm1.ListBox1.SetFocus
' UserForm1.Show
End Sub
I have a template that aids in forcasting revenues weekly. Dates (each day of the year) runs down Column "A". Accross the top are the dates for each week (52 dates).
Jan 1, 09 Jan 8, 09 Jan 15, 09 Jan 22, 09
Jan 1, 09
Jan 2, 09
Jan 3, 09
Jan 4, 09
Jan 5, 09
etc, etc, etc
As each week passes, new revenues are fcsted for the balance the year. These number are copy and pasted to the corresponding date in column "A" under the corresponding Row (week of forecast). As time goes on, the data postings starts to resemble a set of stairs. What I want to accomplish is, using a formula in one column I want to pull the last forecasted revenue for each date in column "A"