searched forums but didn't find what i needed.
i have conditional formatting for dates in cells E27-E34
I.E Mon-Fri.
=e27=today() for all cells E29-E34 (Wed-Sunday) work with this Formula is "Format Formula"
but Monday And Tuesday are not working
They have the Exact Same Formula
e27 and e28 are Mon-Tuesday.
I have a spreadsheet where milestone dates are entered into cells.
I need these cells to highlight if the date in them is "today" minus 5 or "today" plus 5.
(plus or minus 5 days with respect to todays date)
Would someone happen to know how to specify this in the conditional formatting dialog box? I prefer not to use VBA...not familiar enough with it.
Looking for a little help with the following formula =CONCATENATE("August 07 -",TODAY()," Evening Instructor") After entering this formula today is displayed as a serial number. I'd like it to display as current month/current day/current year (11/28/08)
View 2 Replies View RelatedI have spent too many hours Googling and trial with mostly error in attempting this. I formatted the very first cell A1 for today's date =TODAY(); this is also dirrectly above the column with all the dates in it. I just want an entire row's contents to turn red if it is 15 days old or older. This =$A1<TODAY()-15 somewhat works, but it only turns the date cell red, not the whole row. It also makes blank cells turns red, which I would like to remain blank (another formula is needed I imagine).
View 3 Replies View RelatedI would like to highlight (conditional format) the "response required by" (Row A) cells / dates if the "current date" (cell $B$2) is exceeded AND if the "response provided By" (Row B) remains BLANK:
Current Date
=Today()
Response Required By
Response Provided By
29-10-2013
23-10-2013
[Code] .......
I am using this formula in a Conditional Formatting
=VLOOKUP(G1,Dies5PE,1)>0
Where "Dies5PE" = a named range
it doesnt work.. if I change the"G1" to a "$G1", everything in the range changes to the conditional format.
Basically what I have is a spreadsheet that checks peoples average case count at the warehouse I work at, problem is that the source of information I use doesn't factor out breaks so I need to do this with if statements. see below.
View 2 Replies View RelatedI'm doing a Comparison of Price quotes from some different vendors and I want to highlight which one is the lowest.
4 Rows with Totals
The Cells are B21, B43, B65, B87
I need each value in each location to be compared to the other 3.
The other thing is that I also C through V that need the same thing.
In the attached spreadsheet you can see I have a chart with three columns. In the third column, I've inserted a conditional formatting formula so that any value between 90% and 94% will be highlighted in orange. What I'd like to do, based on the results in the third column which I've already formatted, is have the other two columns in the same rows highlighted in orange as well. For instance, you see that the 92.30% is highlighted in the third column because it is a value between 90% and 94% per my formula. When that is true, I would also like the 56.02% and the $4,100 (the two cells to its left) highlighted in the same color. I'm not sure how to accomplish this.
View 2 Replies View RelatedI'm looking for a formula to use with conditional formatting that highlights cells if any of more than 3 conditions is met. I saw it on this forum before, but I can't find it with a search. It was something like =or(condition1),or(condition2), etc.
View 9 Replies View RelatedI have the following Conditional Formatting vba code shown below which allows me to format diffrent ranges according to the values in the cell, What I want to be able to do is that if Mycell.value ="" then do not apply the colorindex value, in other words leave any cell in the range which has a null value unchanged.
Private Sub CommandButton1_Click()
' Conditonal format for New hourly report
Dim Mycell As Range
'SL80range formatting
For Each Mycell In Range("sl80range")
Select Case Mycell
Case Is >= 0.8
Mycell.Interior.ColorIndex = 4
Case 0.7 To 0.79999
Mycell.Interior.ColorIndex = 44
Case 0.00001 To 0.6999
Mycell.Interior.ColorIndex = 3
Case Else
End Select
Next
I have worked out the conditional formatting but i have a question. The cell has a date which is input manually - no formulas or anything
it reads 14/09/09. however can i have the cell automattically turn red once the date =NOW() is the 15th sept??
Using TODAY() in SUMIFS
so, this formula works as expected:
What I'm trying to accomplish:
In A1:
If a date in H2:H10 is greater than TODAY(), return the value of that date.
If TODAY() happens to be 1/20 and H2:H10 looks like this:
1/5/09
1/6/09
1/13/09
1/14/09
1/19/09
1/15/09
1/22/09
1/27/09
1/8/09
1/28/09
than A1 should have the value of 1/22/09
When TODAY() = 1/28/09, A1 should have no value, preferably no error either, but I can live with a NUM! or Value! or #N/A
Dates will not always be ascending. All cells in H2:H10 may not be filled. There may possibly be a duplicate, but the fact that there is a duplicate is not important to my result. (I'm looking for the 'next scheduled working day' whatever it is)
In cell K25 I have a value where if it is greater than 49 I want the forumla to look at the values of Cells L3:L22 (these cells have a range of dates in them). I want the formula to go through these cells and pick the next date after today....If the value in Cell K25 is Less than or equal to 49 I want it to just return Todays date.
I found this post http://www.excelforum.com/excel-gene...ter-today.html which was basically what I was looking for, but for some reason when I put that into my formula it will return the smallest date, even if it is older than today.
So going back to my formula....Here is what I have currently in my cell:
=IF(K25>49,MIN(IF(L3:L22>TODAY(),L3:L22)),TODAY())
Like I mentioned above - this results with dates that are older than today - what can I do to make it return results that are only after todays date?
In my example file
Click the button
Go to today
I am use the following formula =today()+1 to add date and what i would like to do is whne i save the work sheet under and new name is to have the date turn to a valve can this happen ...
View 9 Replies View RelatedI have a wicked wide spreadsheet that has 76 dates. These dates are in weekly increments. (IE 7/4, 7/11, 7/18)
I already have it set up to highlight the current week that I'm in, and there is an arrow above the column. Can I make a button to go to the current week? Like today, I would go to week 7/11.
I saw something with find.max, and give the date in Excels number format. Is this the right way to go?
I'm trying to let Excel know what year it is. The desired output is "2009". I tried the following. One cell (A1) has "=TODAY()" giving me the following output "2/12/2009". Now in another cell (A2) I'm putting "=RIGHT(A1,4) and the output is "9856". The format is set to general.
How do I get the output to read "2009", or is there any other way I can get the current year into a cell?
Another thing is that I want to identify a leap year as well. Leap years can be devided by four. I want to divide to outcome of cell A2 above by four and check if this can be divided by four. I don't know however how to put this in a formula unfortunately. To outcome has to be nothing behind the comma/dot=YES, otherwise=NO.
How to produce a formula that will stop counting after the day is over. For example, i have a spreadsheet that is calculating the total number of pending questions for multiple project types which are found on seperate tabs. The first tab of my spreadsheet is a Summary tab which displays the statistics of each project tab including how many questions we have pending. The number of questions are calculated by picking up how many cells display "Y" in the PQ (pending questions) column of each tab.
Our current process is to type in the number displayed in the summary that shows how many questions we have pending. What that does, is freeze the total number of questions we had pending for that day. I am trying to make this more automated by coming up with a formula that will freeze this number on its own.
If I write out what I am trying to do, it would go something like this:
Count cells with "Y" and stop counting after today.
Current formula in cell:
=COUNTIF(MDU!$L$6:$L$1000,"=Y")+COUNTIF(SDU!$L$6:$L$1000,"=Y")
I have a column that I would like to have a count of all the dates that areless then today's date.
I have tried: =countif(d2:d25,"<TODAY",0) This has only gotten me 0. If I leave the " " out then I get an error message.
I have dates in column A a6:a5000. I need a formula to add a remark "Today" in column B for the current date. In short the remark in column B should display the remark "Today" for the current date daily. The dates in column A are in 'DD MM YYYY'.
View 2 Replies View RelatedI've inserted the current date into an excel form using the TODAY() function.
I also need to provide the form in French, and when I change the language for the cell with the TODAY() function, it automatically abbreviates the month. For example, today's date appears as "13 nov. 2008" rather than "13 novembre 2008" as I would like it to appear.
Any ideas on how to change this?
this is my first post and i was a little unsure as to whether to put this in the General or VB/Macros forum, because it kind of involves both.
i'm trying to write a macro that inserts a formula that uses the date of the day that it was run (that is, i don't want it to be volatile like TODAY() and NOW(), but i don't want to have to manually type in the date into each formula).
is there a way that i can write a formula that uses the date of the day it is entered into the cell, or write a macro that adds today's date (perhaps using ActiveCell.Value = Date) and then writes a formula around that?
I have to figure out the date of 3 months ago from today. The rule is:
1) if today is the month end (e.g. 30/06/2013), then 3 months ago will also be the month end (e.g. 31/03/2013).
2) if today is not the month end (e.g. 10/06/2013), then 3 months ago will have the same day (e.g. 10/03/2013). But this has some exceptional case, because some month has 30th while other month does not. For example, if today is 30/05/2013, then 3 months ago will be in February which does not have 30th. In this case, just make it as the month end of 3 months ago.
In Excel VBA, is there a way to get the beginning date and the last date for the previous month from TODAY()?
i.e. If TODAY is Jan 3, 2014, then I would like to have the beginning date as Dec 1, 2013 and the end date as Dec 31, 2013.
i.e. If TODAY is Mar 18, 2012, then I would like to have the beginning date as Feb 1, 2012 and the end date as Feb 29, 2012 (yes 29, not 28).
So basically, I need to have the AI to know the beginning of the year (January 2014 - takes Dec 2013) and if it happens to be February, the 'end date' is either 28th or 29th depending on the year.
I have columns labeled with various dates.
How can I have excel go to the column with todays date when the sheet is opened?
In a single cell, I want to say "Report Complete as of" and then the current date. Is there a way to use & the TODAY function that will return TODAY as a date in conjunction with the text? I keep getting "Report Complete as of 39743" instead of "Report Complete as of 10/22/08", for example, and I can't seem to convert the numbers to a date.
View 2 Replies View RelatedI need to find a way to take the TODAY() function and and split the individual digits out and recombine them to a text cell, i have tried using the MID function but it returns the serial rather than the actual number, e.g
today() 02/01/2009 needs to be shown as 020108 (this needs to be text rather than a number) as it is included within an INDIRECT formula.
I want a report header to be similar to: REPORT AS OF 2/23/10. If I use the TODAY() function by itself, I get the date; 2/23/10. But when I concatenate it with the text "REPORT AS OF " & TODAY()" I get REPORT AS OF 40232". How do I preserve the date format when I concatenate it with text?
View 2 Replies View Related