i would like to copy my sheet 1 column K which has format cell in percentage and copy over to sheet 2 column K. But it will display decimal places rather then percentage. below code is i use to copy and paste special value. but its not workin.
View 5 Replies
I have a four column listbox where 4th column is percentage. In my source worksheet cells are formatted as percentage but when this is displayed in list box it shows approximately 10 decimals or maybe even more. How can I change my code only to show two decimals in 4th column?
View 3 Replies View RelatedI need to do the following:
If column X is less then < £1000 will have a 15% increase, those less than < £1500 a 12 % increase and any figure greater than > £1500 a 10% increase.
I could easily do this using a case statment using VBA, but im not allowed, any idea of a formulae that would do it?
column to take out a percentage of column A up to a set amount. So B takes out 100% up to $40 then C takes out 100% up to $20 etc.
how I can get my spread sheet do accomplish this.
I have a long column of numbers that I want to apply a single percentage to all the numbers in each column. How do I do that?
View 3 Replies View RelatedI want to track a friendly competition of squash games with a friend.
player1
player2
January
[Code].....
I have a simple column chart showing the progress of each month but I'd like a 13th pair of bars showing the percentage, with the percentage scale on the secondary axis. Do I have to choose the percentage cells as a separate series?
I would like to figure out a formula that will calculate what percentage of a column is filled based on the total number of rows.
For instance if I have Column K and that will have delayed savings by sales pursuit, I want to be able to calculate the percentage of what is being delayed from a total number of pursuits (basically the count of rows in column A). Ideally this would be a dynamic range (offset).
Ex. Say I have 25 rows in column A, but I only have 2 rows in column K filled. How can I calculate that there is a 8% (2/25) delay?
I have a spreadsheet that tracks in column D "completed" projects. I want column T to populated "100%" when column D has the text "completed" in the cell. What is the formula?
View 1 Replies View Relatedi'm trying to crack what should surely be a simple problem. Attached is my spreadsheet.
As you can see I have 3 columns of detail, with totals spread over a number of months.
I want to be able to display the percentage of the Resource total for each other grouping.
For example, in my spreadsheet you can see resource Mick Arber at the top. I want to be able to see each of his rows as a percentage of HIS total.
I have an excel spread sheet with columns of dates I am trying to get an average formula that counts dates less than a year old as 1 and blank cells and dates greater than a year old as 0 and then gives me a percentage. For example I have a column with 10 dates all less than 1 year old I would get 100% but if I had a column with 8 dates less than a year old and 1 dates older than a year, and 1 blank cell, I would get 80%
Is this possible at all, or do I have to calculate the percentage for each column individually.
I am trying to add columns to my Excel 2010 Pivot Table to calculate % change of sales from year to year. The field name is "Year", while the item columns in the field are 2007, 2008, 2009, 2010, and 2011. How do I add a column between the years that will calculate the % change os sales up or down from the previous year?
View 2 Replies View RelatedI have a single column of numerical values that may repeat many times within
the column.
I require a flexible Formula:
Use an Input Cell for the specified and changeable Percentage(s) %.
Column may be filtered – so only take into account Visible Filtered Cells.
The Formula will calculate and Return the numerical range of values that fall
between the specified percentage % (using the Input Cell) e.g.; 70%.
The Formula should Return two numeric values: a Start Value and an End Value
– NOT necessarily the minimum and maximum per se BUT the MIN and MAX of the
values that appear 70% of the time in the column; therefore, taking into
account Repeat / Duplicate values.
The calculated Results: the two numeric values will be returned to separate
cells on a new Sheet.
I have a workbook that I've built for a project. I've attached a sample workbook. What I'm trying to do, for the entire sheet or workbook if possible, is turn any Cell with a percentage of 30% to 49% yellow and any cell with a percentage of 50% or more Red. I would also like to move the ID's of the variable cells, for example Id number 9922, to the cells beside the description of the rows, Affected would be an example, if the information contained in the same row as the ID meets with a set of variables.
For example I only want the ID's moved if they correspond with IDsub 1-25. One more thing, the people who will be using this spreadsheet will be copying data from a website when it is imported it does not insert the values as numbers. I would like to format the cells, in example workbook they would be any of the cells labeled ID IDsub Variable or Number, so that anything put in that cell will automatically be converted to a number.
I should also probably add that the formatting will be done on approximately 80 rows a sheet with 47 sheets.
I'm trying to create a formula that takes from "Manual" Sheet the number from colume G2 and multiply it by the percentage in sheet "AllocationRule".
My formula currently is =Manual!$G$2*AllocationRule!$B5.
What needs to happen is that the total number in "Manual" needs to be distributed evenly in 4 rows by the percentages allocated in "AllocationRule".
Right now I can't copy my formula over to the sheet because the "AllocationRule" should stop at B5 and not go further and the G2 from "Manual" should not change for the percentage allocation but should change to the next row for the next month.
And then after I've done the calculation I want the LOB in "AllocationRule" to be displayed in the LOB in "H1913_H1914" but I'm not sure what formula to use.
I have a column of cells with values - 0.2%, 0.32%, 0.22, 0.5 etc. The cells with % symbol are in ' Percentage, 2 decimal' format while the plain numbers are in 'General' format i.e. column contains cells in either of these formats. I need a macro where I can specify the column and it will select the cells with the % format, convert it to 'General' and multiply the result by 100 eg. 0.2% converted to 'General' becomes 0.002. When multiplied by 100, result is 0.2 i.e. is displayed without the % symbol.
View 7 Replies View Relatedcalculating the percentage of a percentage and writing the formula for excel.
There are 295 people in a room, of the 295, 75 or 25% are mothers. (I know how to calculate 25% - 75/295 = 25.42) of the 75 mothers 35 have 3 children, 32 have 2 children and 10 have 1 child.
35 is what percent of 25%
32 is what percent of 25%
10 is what percent of 25%
In the attached file I have the data which shows me the market size in value, my market share in value & I did a calculation to get the percentage. What I need is a chart that shows me the market size in column graph, my market share in line graph and I want the percentages to be showing also.
View 3 Replies View RelatedI need the macro to look at cells B9:B84 on the Sheet1 tab of the Cost Template. If it finds an x I need it to copy the 3 cells to the right of the x and paste them in a template. For example if it sees an x in cell B9 it would copy cells C9, D9 and E9, open the Purchase Order to the Detail tab, then paste it to cells B3, C3 and D3. It would continue looking for an x down to B84. So if it found 5 cells with x, it would give me 5 instances of the Purchase Order with 3 cells pasted into each.
I've attached my Cost Template and the Purchase Order it needs to copy to. In the Cost Template is a macro called Create_PO. This is what I was trying to alter to make this happen. I can't seem to get it right! FYI in case it matters, I had to change the Cost Template from .xltm to .xlsm in order to upload it on this site.
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
I have a cell with seven conditional formatting formula rules that I now want to copy to the rest of the column. I can copy/paste special/formats one cell at a time but if I try to to this with a group of cells, (or try using the format painter), it treats the formula references as absolute, even though they aren't shown as absolute in the rules manager. Am I missing something? Using 2007.
View 4 Replies View RelatedI am trying to get excel to search a workbook/(or worksheet if easier) for a matching unique value and fill in its associated data. My first workbook has the SKU (A) filled in but not the UPC (B). My second workbook has both the SKU (A) and the matching UPC (C) filled in.
I need to take both workbooks/(worksheets), compare the SKUs, and if a matching SKU is found, extract the UPC from Workbook 2 and fill in the UPC field in Workbook 1, and if no UPC is present in Workbook 2, then it leaves the cell in Workbook 1 blank.
I have a spreadsheet which is updated daily. Row A of the sheet has the date in it, and every day a new column is created for the that set of data. I have the below code which works at the moment:
[Code] .....
I want to use this same code on another spreadsheet to do the same process (I need to copy and paste 4 columns (A,B,C + D, into E, F, G & H, then tomorrow it will copy E, F, G & H into I, J, K &L etc etc)). The problem I'm having is that A1:C1 is a merged cell, then D isn't (used as a border to separate). So when it is copied I need to select the merged cell columns and column D (i.e. A:C & D on day 1) and paste it into E:H with E1:G1 merged.
If you open the attached file you'll notice that once clients are entered into the name field of the master worksheet that a new worksheet is created with their name based off a master template. What I need now is a way to create a "on-demand" "click" macro that will allow the user to select a month (Jan-Dec) based on my master tab and autocreate a summary worksheet named that month with each client listed on the Team Roster worksheet in the next available column of the worksheet that was just created.
macro generate a prompt to list the months to allow updates frequently.. so if the same month was run twice it would overwrite the previous.. the woman we're doing this for isn't very excel literate...
NOTE: As you enter names on the Team Roaster sheet it will autocreate tabs.. test file has MrExcel as the worksheet, if deleted the sheet will delete automatically.
I have a workbook that usually looks something like this
Category Product No description Price
Balloons 12345 Red Disney balloon .50
Balloons 12567 Blue Princess balloon .86
Balloons 76521 Angry Birds Balloon .80
Kites 23456 A Big red Kite .27
Kites 22222 A small blue kite .06
Banners 10000 Party banner .33
etc..
I need to find a way to copy the category below an empty row from column A and paste it in the blank row in column B . If possible to bolden the text but I could probably work that bit out myself. I'm new to this but have used VBA before to run macros.
I have been working with a few people on here to setup a macro to copy text from a column of cells to another column and then print this in to a text document but it seams to have got stuck in a loop ....
View 9 Replies View RelatedI'm trying to write a program for work. One sheet (whereiseverything.xls) will have a list of parts column E and where it is in the process column (k). Column E of this sheet will have multiple part numbers. (Sometimes duplicated.) I would like to figure out how to write a code to Auto filter (whereiseverything.xls) sheet and copy only one P/N from (whereiseverything.xls) column E onto another Workbook Worksheet (Commit status.xls) column. After that the sheet must copy all of the locations of that P/N from whereiseverything.xls column K into and under the P/N of the Commitstatus.xls.
It will continue to autofilter and copy from where is everything, the "one" p/n and all of its locations into another empty column of Commitstatus.xls until it no longer has part numbers to autofilter on whereiseverything. I am extremely green on VBA programming but here is my first attempt.
Windows("Where is everything commits .xls").Activate
Windows("whereiseverything[1].xxx").Activate
Columns("D:D").Select
Selection.AutoFilter
Windows("Where is everything commits .xls").Activate
Windows("whereiseverything[1].xxx").Activate
Selection.AutoFilter Field:=1, Criteria1:="7516113-905" \<--this Is one p/n
Columns("J:J").Select
Selection.Copy....................................
I have two different Excel reports and the data needs to be copied from each column on one spreadsheet and pasted to the bottom of the equivalent column on the other spreadsheet.
So, is it possible to get a macro that will copy the data from one column then paste it to the next free cell in the column on the other spreadsheet.
If I could get some code to do one column then this should be enough to get me started and I could apply this to the other columns I need to copy.
I have a worksheet on which the data is already grouped. At the top of each group is a row that contains only the group name. Since the rest of that row is blank, I want to use a blank cell on that row as a reference, then copy the group name to a newly created column, then fill that column down to the next group.
The goal is to create a column that contains the group name, rather than just having the group name as a " header" at the top of each group.
i attach the testing2.xls attachment here. from the sheet 1 "original", how to copy from 1 column, column"B" and then paste to column "A" by clicking function "alt + enter" at the same row but different row in the same cell. Output result can refer to the sheet 2 "output".
View 4 Replies View RelatedI need a code to copy the color of column B and put in the respective cell in Column A. I just need the color to copy from column B to Column A.
View 6 Replies View Related
