Copy Seleted Columns
Dec 7, 2008
I have the below code that copies the entire row based on the filter. I want to change it so that it only copies specified values
ActiveSheet.Range("$an$3:$an$1000").AutoFilter Field:=1, Criteria1:=mth, Operator:=xlAnd
If Sheets("bdays").Range("A5") = "" Then
Range(Cells(4, 1), Cells(Rows.Count, 1).End(xlUp)).SpecialCells(xlCellTypeVisible).EntireRow.Copy _
Sheets("bdays").Range("A5")
Else
Range(Cells(4, 1), Cells(Rows.Count, 1).End(xlUp)).SpecialCells(xlCellTypeVisible).EntireRow.Copy _
Sheets("bdays").Cells(Rows.Count, 1).End(xlUp)(2, 1)
End If
View 9 Replies
ADVERTISEMENT
Dec 30, 2008
when i copy columns resulted from another columns operations and paste in new sheet i got garbage ,could you tell me why and how to overcome this problem.
View 2 Replies
View Related
Aug 6, 2009
Example:................
The key point is that I have over 400 columns grouped in three, offset by one row down for each (this is due to a different formula I have working). Each column is 60 numbers long (not including empty cells above data). I want to copy all of these columns into a single set of three columns on another sheet (Sheet2). (These will be the fifth, sixth, and seventh columns, E, F, and G. If it would be simpler, I could simply copy the third of each set of columns on Sheet1 (C, F, I) to column G of Sheet2. Then there would be a total of 144 columns being copied (60 numbers per column).) All of this copying has to be values-only as the original columns consist of formulas referencing outside cells. Sheet2 should look like this:.............
View 7 Replies
View Related
Jun 7, 2006
I have 2 worksheets in which I have to copy one column of cells from one to
the other. The problem is that the "main" worksheet lists nearly 3,500
clients and I have to copy numbers into the "main" worksheet on weekly basis
from another worksheet that lists only about 1,100 of those 3,500 clients.
Both client lists are in alphabetical order, but I obviously cannot just copy
one column into the other, because then the numbers won't be matching the
correct clients.
View 10 Replies
View Related
Apr 21, 2007
I have 2 workbooks (workbook1 & workbook2). Information in column A and column N must match both workbooks per row/ cell (ie. if A2 and N2 in workbook1 match workbook2, copy information from 3 other columns (S, T, U from from workbook1 into workbook2 - cells S2, T2, U2). Workbook2 may have information in column S, T, U, but I need to over-write it with the information from workbook1. If the information does not match per that row/cell (ie. A2 in both worksheets are the same, but N2, they are not, so go to the next line that does match and copy the information into worksheet2). I do not want to use a V- lookup for this problem. I really need a marco.
View 3 Replies
View Related
Jun 24, 2008
I am currently working on a data analysis project (data mining) and need to collect and later analyze statistics for the inputs which control a series of calculations. These statistics are shown in the Statistics 1, Statistics 2 and Statistics 3 cells in the workbook that I attached. The inputs are X,Y; all possible values for these inputs are listed in the N,O columns. Basically I need a macro which would take the values from these two columns and place them pair after pair into the controlling cells (K3, L3), then it would copy cells H2 through L3 (updated stats) to a new sheet after each copy operation - so that I will finally have a list of statistics for all of the input pairs.
View 3 Replies
View Related
Nov 14, 2008
The worksheet I have copies and pastes the whole row based on value in column Q. How can I modify my code to copy only the data from columns F, G, J, and Q in the same row. Example: if Q5 is "paid" copy F5, G5, J5, and Q5 to Summary sheet in columns A to D.
Sub cond_copy()
Sheets("List").Select
rowcount = Cells(Cells.Rows.Count, "q").End(xlUp).Row
For i = 1 To rowcount
Range("q" & i).Select
check_value = ActiveCell
If check_value = "aot" Or check_value = "paid" Then
ActiveCell.EntireRow.Copy
Sheets("Summary").Select
rowcount = Cells(Cells.Rows.Count, "a").End(xlUp).Row
Range("a" & rowcount + 1).Select
ActiveSheet.Paste
Sheets("List").Select
End If
Next
End Sub
View 4 Replies
View Related
Feb 18, 2014
I am having a hard time with a copying values, it is best if I make an example. The idea is: if A1 is "Toyota" and there is some other text also in B1, B2 and B3 then A1,A2 and A3 are "Toyota"
Book1.xls
View 4 Replies
View Related
Jul 15, 2005
when I want to send by email I find I cannot copy these smaller sheets - every attempt at a copy will also copy the hidden columns.
How to copy a spreadsheet and NOT pick up the hidden columns?
I realise this might be nearly impossible or considered useless because no hidden columns would mean either making the copy with blank hidden columns or altering all formulas to suit a sheet which now does not have all the original columns.
View 2 Replies
View Related
Jul 30, 2013
What vba code can transpose ALl column A values from sheet 1 to get a row values to sheet 2.
example in sheet 1 column A i have
Apple
Orange
Mango
Guava
Pineapple
and in sheet 2 it will be as
A B c d
Apple Orange Mango Guava and etc.
View 1 Replies
View Related
Feb 26, 2014
I have a worksheet with values that change weekly (sample, attached). The number of rows and columns may change as well. However, columns A, B, and C will always have date, name and location data and therefore must be preserved. Aside from the headers, the values in the columns from D onward will include only the numbers 0, 1, 2, or 3.
I need to copy the columns to Sheet2 and then delete all of the columns from D onward that do not have a 2 or a 3 in them. In other words, I need to always keep columns A, B, and C, and also keep any column (and all of its data) if a 2 and/or 3 shows up anywhere in the column.
I imagine there is even a quicker way to cherry pick the first three columns, as well as any other columns that have a 2 or 3 in them, and then paste them to the second worksheet. However, either approach will meet the need well enough.
View 3 Replies
View Related
Jul 19, 2009
I have one master sheet that I update daily from several other spreadsheets.Right now I'm having to manually place the columns side by side and copy the new data over. The column and row format are exactly the same for each of these spreadsheets. Each day we go out and collect data, just numbers. I then must copy the numbers to the master sheet. I cant just copy and paste the columns because in the rows that don't have data in them it will overwrite the previous days information with blanks. I've attached a sample with some dummy data in it. I only update data in columns G and H.
View 5 Replies
View Related
Dec 29, 2012
what i want in my code here is, i have 3 tabs in my attached workbook(product db, product export, invalid product).
In product db tab if Export column contain Y then that required info should paste in "product export" tab and only this columns(A,B,C,E,F,G,H,I,K) should paste
In product db tab if export column contain N then that required info should paste in "invalid product" tab and only this columns(A,B,C,E,F,G,H,I,K) should paste
to get this output i prepared code but it seems in longer way and make shorter to this code.
i make a separate lines for each column to copy and paste.
[URL]
View 4 Replies
View Related
Sep 3, 2013
I am trying to simply copy the range of C7:C LastRow and W7:W LastRow
The code below copies all columns C:W to LastRow. I want just column C and column W.
I've tried some other combinations, but it has me stumped.
Code:
'Range("C7:C" & LastRow, "W7:W" & LastRow).Copy
View 4 Replies
View Related
Nov 13, 2013
How do I copy the contents in column C on sheet 1 to column A on sheet 2?
When I export from quickbooks it is going to replace sheet 1 with updated items and prices. So I want sheet 2 to have the same information so it retains my formulas in other columns?
View 1 Replies
View Related
Mar 2, 2014
I've written a code that supposed to copy all available rows from columns A to D (starting from cell A16).
- How can the code be changed so that in addition to values in columns A:D values of the columns F:H would also be copied?
The code:
Range("A16").Select
ActiveCell.Range("A1:D1").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.copy
Sheets("Sheet1").Select
Range("B2").Activate
[code]....
View 2 Replies
View Related
Mar 14, 2014
I need a macro to copy every 4 columns to a new sheet and name it what is in the 2nd column 7th row
So it would copy columns A-D to a new sheet and name the sheet B7. Then copy E-H and name it F7....etc.
It could stop when there is nothing in the 2nd column 7th row of each division.
View 1 Replies
View Related
Jun 5, 2014
Is there a way to copy from one sheet to another but to different columns? For example, I want to copy the information from Sheet1 to Sheet2, starting at row 17 and leaving column C blank and pasting the information from Sheet1 column C to Sheet2 Column D?
I thought I could use something like this or with a combination using Unbound but couldn't get it to work.
Code:
Worksheets("sheet1").UsedRange.Copy Destination:=Worksheets("sheet2").Cells(Rows.Count, 1).End(xlUp)(17,
But how do you drop the info to the correct columns?
Sheet1ABC1EmployeeStartEnd2Bill3/8/20143/11/20143Bill6/5/20146/8/20144Dave10/2/201410/5/20145Debra6/7/20146/10/20146Michael1/2/20141/5/20147Rachael9/15/20149/18/20148Rick9/12/20149/15/2014Excel 2010
Sheet2ABCD16EmployeeStartEnd17Bill3/8/20143/11/201418Bill6/5/20146/8/201419Dave10/2/201410/5/201420Debra6/7/20146/10/201421Michael1/2/20141/5/201422Rachael9/15/20149/18/201423Rick9/12/20149/15/2014Excel 2010
View 8 Replies
View Related
Jun 23, 2014
I have 2 datasets. 1 of them is 5103 lines and other one is 5121. They contain the samde data but as you can see one of the dataset have 18 more lines than the other. Because of this I can not copy a columns from one dataset to other because the values will not match with the correct ones because of the line differences. How can i compare for different rows or how can i copy at least the 5103 line correctly and than fill other 18 by hand ?
View 1 Replies
View Related
May 16, 2007
This is part of my sheet that I am copying from: ...
View 28 Replies
View Related
Jul 8, 2008
I have data - 60000+ lines - that represents names and addresses all in one column. I'm trying to extract individual addresses and put them into columns so I can use the file as the data for a mailmerge. Alas, there's no pattern to how many lines the addresses take up (most are 3 lines but some 2, some 4 or 5) nor how many lines are between addresses.
For example...
A1 GHW Bush
A2 354 Hunter St
A3 Ossining, NY 10562
A4
A5 Jane Doe
A6 1 Center Street
A7 Suite 1200
A8 Anytown, CA 95060
A9
A10
A11 Barak Obama
A12 1600 Pennsylvania Ave
A13 Washington, DC 20500
A14
A15 Tedd
A16 St Thomas, USVI 00801
A17
A18 Santa Claus
A19 1 Northpole Place
A20 North Pole, AK 97111
So, is there any way to put the above data into columns instead of rows? I have 6 - 10 files with 60000 lines per file to compile for a mail merge and the only method I could come up with is very...inefficient.
View 9 Replies
View Related
Oct 8, 2008
I want to copy a column of values and blanks and past the values into another column without the blanks.
View 9 Replies
View Related
Feb 19, 2007
I have attached an Excel workbook to try to help explain my problem. At the moment I am completing the following process manually but wonder if anyone knows of a way I can automate the process:
The data collected from the instrument are in columns A and B. I need to copy the data from A2:A99 (i.e. the highest angle to the lowest angle) into column G (starting in cell G9). Then copy the corresponding torque values in B2:B99 into column E (starting in E9). I then need to copy the next string of data from A100:A210 (i.e. lowest angle to the highest angle) into column AU (starting in cell AU9) and again copy the corresponding torque values in B100:B210 into column AS (starting in cell AS9).
I need to continue this process of copying the highest angle to lowest angle then lowest angle to highest angle and the corresponding torques from columns A and B respectively into the following columns.
Column Copied To Copy From A Copy From BRow Number
O M 211:323
BC BA 324:427
W U 428:533
BK BI 544:634
AE AC 635:738
BS BQ 739:842
AM AK 843:947
CA BA 948:1052
To complicate things slightly I have many data sets that I need to do this with and need to be able to use the formula or macro to also process these, however the length of the string of data (i.e. the number of values between highest and lowest angles) is different for each string of data therefore it is not as straightforward as copying the same number of values each time, so the formula or macro needs to look for the highest angle then the lowest followed by the lowest angle then the highest.
I would be extremely grateful for any suggestions or help you may be able to provide as this could save me days of data processing.
View 9 Replies
View Related
Apr 18, 2007
how to copy certain columns using macro code. I have attached a sample file and shaded the cells that I want the macro to select for me.
The problems I face are
1. Cells are merged.
2. Cell in one row has 2 sub divisions on the row below.
Also the row headers always will not be in the same columns. I need to use VLOOKUP or HLOOKUP to find out whether the column am searching is the actual one I want.
For example I need to search for Name using VLOOKUP / HLOOKUP and then copy the names under them. Similiarly to all the other cells that I need.
View 9 Replies
View Related
Aug 27, 2007
how do I copy three rows(1 to 3) with columns changing dynamically through VBA Coding.
View 6 Replies
View Related
Sep 5, 2007
how to reference an entire column only knowing the column numbers, not letters. The response below was given.
Range(Cells(1, 40), Cells(1, 44)).EntireColumn.Select
I have a similar situation, except that I use the FIND command to return a column number based on a string match.
X_Column = Sheets ("Sheet1").Range("A1:IV1").Find("X").Column
Y_Column = Sheets ("Sheet1").Range("A1:IV1").Find("Y").Column
Z_Column = Sheets ("Sheet1").Range("A1:IV1").Find("Z").Column
Because of this, I can recieve non-sequential column numbers, simply based on where "X", "Y" or "Z" are in the sheet, which can be anywhere. I would like to select X_Column, Y_Column, and Z_Column and copy/paste to another sheet, hopefully without having to loop. I have a feeling that an answer refering to Named Ranges is coming, but I'm very green on the subject.
View 4 Replies
View Related
Nov 30, 2007
I have a workbook with 20 worksheets. I want to start from any worksheet and run a macro that will copy some columns (A:E) from another worksheet called TABLE1 into columns I:M of worksheet I was originally in. I don't want to specify which worksheet I am in when I start as they are all called different names and I want the generic macro to run from any sheet. I simply want the macro to register the worksheet I am in when I run the macro as the reference sheet, and copy columns/data from TABLE1 into the correct columns of the worksheet.
I would then select the next worksheet - run the macro again - and it would copy the same columns from TABLE1 into the worksheet I am in. I know the following is not right, but what I have so far is =
ActiveSheet.Select
Worksheets("Table1").Select
Columns("A:E").Copy
ActiveSheet("I:M").Paste
this successfully goes to TABLE1 sheet and copies columns A:E but does not go back to the sheet I was originally in - I don't know how to code so it knows what the starting sheet was - it tends to either fail or copy the columns back into TABLE1 sheet.
View 4 Replies
View Related
Jan 26, 2008
I have to work with a report where columns are sometimes added or removed. However, the columns I need are always there, just not always at the same place. To identify them, I have my macro search for their title (they never change) and enter the column number in a variable (iSID, iPID, iEPN, iEPT, and iOD).
I now need to take these five columns and copy them into another workbook. Usually, I would use something like Range("A:A":"D:D":etc). but now I'm a bit stuck. I wanted to use something like Range(Columns(iSID), Columns(iPID), etc), but I can't seem to be able to write that correctly or something (I get errors like "wrong number of arguments or invalid property assignment"). I guess I could copy the columns one by one using Columns(iSID), but I was wondering if there wouldn't be a more elegant way to do that.
View 2 Replies
View Related
Jul 7, 2012
I am trying to copy and past different columns from different sheets and copy them in one sheet which I named "BI Output Data".
VB:
'This copy and past the BI Result'
If CheckBox1.Value = True And CheckBox7.Value = True Then
With Sheets("AFA Output Data")
[Code]....
View 2 Replies
View Related
Oct 16, 2012
I need to compare names in column A(sheet 1) to names in column A(sheet2) and if there is a match then I need the date from column B(sheet 2) to be copied to column B(sheet1).
Example of the sheets:
Sheet 1:
Name
Food Safety
Smith,John
Walker,James
Stratton,William
Sheet 2:
Name
Food Safety
Christian, Marie
03/03/1994
Harker, Stuart
01/06/1995
Walker, James
05/06/1997
View 9 Replies
View Related
